- 12 Mar, 2017 40 commits
-
-
Greg Kroah-Hartman authored
-
James Smart authored
commit 8ea73db4 upstream. Correct WQ creation for pagesize The driver was calculating the adapter command pagesize indicator from the system pagesize. However, the buffers the driver allocates are only one size (SLI4_PAGE_SIZE), so no calculation was necessary. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ralf Baechle authored
commit ae2f5e5e upstream. Fix the following build error with binutils 2.25. CC arch/mips/mm/sc-ip22.o {standard input}: Assembler messages: {standard input}:132: Error: number (0x9000000080000000) larger than 32 bits {standard input}:159: Error: number (0x9000000080000000) larger than 32 bits {standard input}:200: Error: number (0x9000000080000000) larger than 32 bits scripts/Makefile.build:293: recipe for target 'arch/mips/mm/sc-ip22.o' failed make[1]: *** [arch/mips/mm/sc-ip22.o] Error 1 MIPS has used .set mips3 to temporarily switch the assembler to 64 bit mode in 64 bit kernels virtually forever. Binutils 2.25 broke this behavious partially by happily accepting 64 bit instructions in .set mips3 mode but puking on 64 bit constants when generating 32 bit ELF. Binutils 2.26 restored the old behaviour again. Fix build with binutils 2.25 by open coding the offending dli $1, 0x9000000080000000 as li $1, 0x9000 dsll $1, $1, 48 which is ugly be the only thing that will build on all binutils vintages. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Ralf Baechle authored
commit f9f1c8db upstream. Signed-off-by:
-
Ravi Bangoria authored
commit c21a493a upstream. Currently xmon data-breakpoint feature is broken. Whenever there is a watchpoint match occurs, hw_breakpoint_handler will be called by do_break via notifier chains mechanism. If watchpoint is registered by xmon, hw_breakpoint_handler won't find any associated perf_event and returns immediately with NOTIFY_STOP. Similarly, do_break also returns without notifying to xmon. Solve this by returning NOTIFY_DONE when hw_breakpoint_handler does not find any perf_event associated with matched watchpoint, rather than NOTIFY_STOP, which tells the core code to continue calling the other breakpoint handlers including the xmon one. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Magnus Lilja authored
commit adee40b2 upstream. Commit 3d8cc000 ("dmaengine: ipu: Consolidate duplicated irq handlers") consolidated the two interrupts routines into one, but the remaining interrupt routine only checks the status of the error interrupts, not the normal interrupts. This patch fixes that problem (tested on i.MX31 PDK board). Fixes: 3d8cc000 ("dmaengine: ipu: Consolidate duplicated irq handlers") Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Rafał Miłecki authored
commit a971df0b upstream. This allows tracking device state and e.g. makes devm work as expected. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
colyli@suse.de authored
commit 03a9e24e upstream. Recently I receive a bug report that on Linux v3.0 based kerenl, hot add disk to a md linear device causes kernel crash at linear_congested(). From the crash image analysis, I find in linear_congested(), mddev->raid_disks contains value N, but conf->disks[] only has N-1 pointers available. Then a NULL pointer deference crashes the kernel. There is a race between linear_add() and linear_congested(), RCU stuffs used in these two functions cannot avoid the race. Since Linuv v4.0 RCU code is replaced by introducing mddev_suspend(). After checking the upstream code, it seems linear_congested() is not called in generic_make_request() code patch, so mddev_suspend() cannot provent it from being called. The possible race still exists. Here I explain how the race still exists in current code. For a machine has many CPUs, on one CPU, linear_add() is called to add a hard disk to a md linear device; at the same time on other CPU, linear_congested() is called to detect whether this md linear device is congested before issuing an I/O request onto it. Now I use a possible code execution time sequence to demo how the possible race happens, seq linear_add() linear_congested() 0 conf=mddev->private 1 oldconf=mddev->private 2 mddev->raid_disks++ 3 for (i=0; i<mddev->raid_disks;i++) 4 bdev_get_queue(conf->disks[i].rdev->bdev) 5 mddev->private=newconf In linear_add() mddev->raid_disks is increased in time seq 2, and on another CPU in linear_congested() the for-loop iterates conf->disks[i] by the increased mddev->raid_disks in time seq 3,4. But conf with one more element (which is a pointer to struct dev_info type) to conf->disks[] is not updated yet, accessing its structure member in time seq 4 will cause a NULL pointer deference fault. To fix this race, there are 2 parts of modification in the patch, 1) Add 'int raid_disks' in struct linear_conf, as a copy of mddev->raid_disks. It is initialized in linear_conf(), always being consistent with pointers number of 'struct dev_info disks[]'. When iterating conf->disks[] in linear_congested(), use conf->raid_disks to replace mddev->raid_disks in the for-loop, then NULL pointer deference will not happen again. 2) RCU stuffs are back again, and use kfree_rcu() in linear_add() to free oldconf memory. Because oldconf may be referenced as mddev->private in linear_congested(), kfree_rcu() makes sure that its memory will not be released until no one uses it any more. Also some code comments are added in this patch, to make this modification to be easier understandable. This patch can be applied for kernels since v4.0 after commit: 3be260cc ("md/linear: remove rcu protections in favour of suspend/resume"). But this bug is reported on Linux v3.0 based kernel, for people who maintain kernels before Linux v4.0, they need to do some back back port to this patch. Changelog: - V3: add 'int raid_disks' in struct linear_conf, and use kfree_rcu() to replace rcu_call() in linear_add(). - v2: add RCU stuffs by suggestion from Shaohua and Neil. - v1: initial effort. Signed-off-by:
Coly Li <colyli@suse.de> Cc: Shaohua Li <shli@fb.com> Cc: Neil Brown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Maxime Ripard authored
commit fb61bb82 upstream. The RTC is clocked from either an internal, imprecise, oscillator or an external one, which is usually much more accurate. The difference perceived between the time elapsed and the time reported by the RTC is in a 10% scale, which prevents the RTC from being useful at all. Fortunately, the external oscillator is reported to be mandatory in the Allwinner datasheet, so we can just switch to it. Fixes: 9765d2d9 ("rtc: sun6i: Add sun6i RTC driver") Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Maxime Ripard authored
commit a9422a19 upstream. Some registers have a read-modify-write access pattern that are not atomic. Add some locking to prevent from concurrent accesses. Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Weston Andros Adamson authored
commit ed92d8c1 upstream. We're not taking into account that the space needed for the (variable length) attr bitmap, with the result that we'd sometimes get a spurious ERANGE when the ACL data got close to the end of a page. Just add in an extra page to make sure. Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
J. Bruce Fields authored
commit 6682c14b upstream. Bitmap and attrlen follow immediately after the op reply header. This was an oversight from commit bf118a34. Consequences of this are just minor efficiency (extra calls to xdr_shrink_bufhead). Fixes: bf118a34 "NFSv4: include bitmap in nfsv4 get acl data" Reviewed-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
-
Trond Myklebust authored
commit a974deee upstream. If we exit because the file access check failed, we currently leak the struct nfs4_state. We need to attach it to the open context before returning. Fixes: 3efb9722 ("NFSv4: Refactor _nfs4_open_and_get_state..") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Christoph Hellwig authored
commit 783112f7 upstream. Both the NFS protocols and the Linux VFS use a setattr operation with a bitmap of attributes to set to set various file attributes including the file size and the uid/gid. The Linux syscalls never mix size updates with unrelated updates like the uid/gid, and some file systems like XFS and GFS2 rely on the fact that truncates don't update random other attributes, and many other file systems handle the case but do not update the other attributes in the same transaction. NFSD on the other hand passes the attributes it gets on the wire more or less directly through to the VFS, leading to updates the file systems don't expect. XFS at least has an assert on the allowed attributes, which caught an unusual NFS client setting the size and group at the same time. To handle this issue properly this splits the notify_change call in nfsd_setattr into two separate ones. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Christoph Hellwig authored
commit 758e99fe upstream. Simplify exit paths, size_change use. Signed-off-by:
-
Larry Finger authored
commit 6773386f upstream. Kernels built with CONFIG_KASAN=y report the following BUG for rtl8192cu and rtl8192c-common: ================================================================== BUG: KASAN: slab-out-of-bounds in rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] at addr ffff8801c90edb08 Read of size 1 by task kworker/0:1/38 page:ffffea0007243800 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000004000(head) page dumped because: kasan: bad access detected CPU: 0 PID: 38 Comm: kworker/0:1 Not tainted 4.9.7-gentoo #3 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-DS3H, BIOS F11a 11/13/2013 Workqueue: rtl92c_usb rtl_watchdog_wq_callback [rtlwifi] 0000000000000000 ffffffff829eea33 ffff8801d7f0fa30 ffff8801c90edb08 ffffffff824c0f09 ffff8801d4abee80 0000000000000004 0000000000000297 ffffffffc070b57c ffff8801c7aa7c48 ffff880100000004 ffffffff000003e8 Call Trace: [<ffffffff829eea33>] ? dump_stack+0x5c/0x79 [<ffffffff824c0f09>] ? kasan_report_error+0x4b9/0x4e0 [<ffffffffc070b57c>] ? _usb_read_sync+0x15c/0x280 [rtl_usb] [<ffffffff824c0f75>] ? __asan_report_load1_noabort+0x45/0x50 [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d0cbe>] ? rtl92c_dm_rf_saving+0x96e/0x1330 [rtl8192c_common] ... The problem is due to rtl8192ce and rtl8192cu sharing routines, and having different layouts of struct rtl_pci_priv, which is used by rtl8192ce, and struct rtl_usb_priv, which is used by rtl8192cu. The problem was resolved by placing the struct bt_coexist_info at the head of each of those private areas. Reported-and-tested-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Ping-Ke Shih authored
commit 40b368af upstream. The addresses of Wlan NIC registers are natural alignment, but some drivers have bugs. These are evident on platforms that need natural alignment to access registers. This change contains the following: 1. Function _rtl8821ae_dbi_read() is used to read one byte from DBI, thus it should use rtl_read_byte(). 2. Register 0x4C7 of 8192ee is single byte. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Andrew Price authored
commit f38e5fb9 upstream. We must hold the rcu read lock across looking up glocks and trying to bump their refcount to prevent the glocks from being freed in between. Signed-off-by:
Andrew Price <anprice@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Steve Wise authored
commit f2625f7d upstream. cma_accept_iw() needs to return an error if conn_params is NULL. Since this is coming from user space, we can crash. Reported-by:
Shaobo He <shaobo@cs.utah.edu> Acked-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jason Gunthorpe authored
commit 55efcfcd upstream. The RDMA core uses ib_pack() to convert from unpacked CPU structs to on-the-wire bitpacked structs. This process requires that 1 bit fields are declared as u8 in the unpacked struct, otherwise the packing process does not read the value properly and the packed result is wired to 0. Several places wrongly used int. Crucially this means the kernel has never, set reversible correctly in the path record request. It has always asked for irreversible paths even if the ULP requests otherwise. When the kernel is used with a SM that supports this feature, it completely breaks communication management if reversible paths are not properly requested. The only reason this ever worked is because opensm ignores the reversible bit. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit d77044d1 upstream. VSS may use a char device to support the communication between the user level daemon and the driver. When the VSS channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new VSS offer from the host. Implement this logic. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 20951c75 upstream. Fcopy may use a char device to support the communication between the user level daemon and the driver. When the Fcopy channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new Fcopy offer from the host. Implement this logic. Signed-off-by:
-
K. Y. Srinivasan authored
commit 5a66fecb upstream. KVP may use a char device to support the communication between the user level daemon and the driver. When the KVP channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new KVP offer from the host. Implement this logic. Signed-off-by:
-
Vitaly Kuznetsov authored
commit 3c7630d3 upstream. Initializing hv_context.percpu_list in hv_synic_alloc() helps to prevent a crash in percpu_channel_enq() when not all CPUs were online during initialization and it naturally belongs there. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 421b8f20 upstream. It may happen that not all CPUs are online when we do hv_synic_alloc() and in case more CPUs come online later we may try accessing these allocated structures. Signed-off-by:
-
Magnus Lilja authored
commit 5528954a upstream. Commit 304f7e5e ("usb: gadget: Refactor request completion") removed check if req->req.complete is non-NULL, resulting in a NULL pointer derefence and a kernel panic. This patch adds an empty complete function instead of re-introducing the req->req.complete check. Fixes: 304f7e5e ("usb: gadget: Refactor request completion") Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
William wu authored
commit 5de4e1ea upstream. The commit 4ac53087 ("usb: xhci: plat: Create both HCDs before adding them") move add hcd to the end of probe, this cause hcc_params uninitiated, because xHCI driver sets hcc_params in xhci_gen_setup() called from usb_add_hcd(). This patch checks the Maximum Primary Stream Array Size in the hcc_params register after add primary hcd. Signed-off-by:
William wu <william.wu@rock-chips.com> Acked-by:
Roger Quadros <rogerq@ti.com> Fixes: 4ac53087 ("usb: xhci: plat: Create both HCDs before adding them") Signed-off-by:
-
Alexandre Bailon authored
commit a994ce2d upstream. DA8xx driver is registering and using the CPPI 3.0 DMA controller but actually, the DA8xx has a CPPI 4.1 DMA controller. Remove the CPPI 3.0 quirk and methods. Fixes: f8e9f34f ("usb: musb: Fix up DMA related macros") Fixes: 7f6283ed ("usb: musb: Set up function pointers for DMA") Signed-off-by:
Alexandre Bailon <abailon@baylibre.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Maciej S. Szmigiero authored
commit 61cd1b4c upstream. ds2490 driver was doing USB transfers from / to buffers on a stack. This is not permitted and made the driver non-working with vmapped stacks. Since all these transfers are done under the same bus_mutex lock we can simply use shared buffers in a device private structure for two most common of them. While we are at it, let's also fix a comparison between int and size_t in ds9490r_search() which made the driver spin in this function if state register get requests were failing. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Maciej S. Szmigiero authored
commit d2ce4ea1 upstream. Near the beginning of w1_attach_slave_device() we increment a w1 master reference count. Later, when we are going to exit this function without actually attaching a slave device (due to failure of __w1_attach_slave_device()) we need to decrement this reference count back. Signed-off-by:
-
Marc Kleine-Budde authored
commit 7c426313 upstream. The priv->cmd_msg_buffer is allocated in the probe function, but never kfree()ed. This patch converts the kzalloc() to resource-managed kzalloc. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Peter Rosin authored
commit 9cf6cdba upstream. Fixes a regression triggered by a change in the layout of struct iio_chan_spec, but the real bug is in the driver which assumed a specific structure layout in the first place. Hint: the two bits were not OR:ed together as implied by the indentation prior to this patch, there was a comma between them, which accidentally moved the ..._SCALE bit to the next structure field. That field was .info_mask_shared_by_type before the _available attributes was added by commit 51239600 ("iio:core: add a callback to allow drivers to provide _available attributes") and .info_mask_separate_available afterwards, and the regression happened. info_mask_shared_by_type is actually a better choice than the originally intended info_mask_separate for the ..._SCALE bit since a constant is returned from mpl3115_read_raw for the scale. Using info_mask_shared_by_type also preserves the behavior from before the regression and is therefore less likely to cause other interesting side effects. The above mentioned regression causes an unintended sysfs attibute to show up that is not backed by code, in turn causing the following NULL pointer defererence to happen on access. Segmentation fault Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ecc3c000 [00000000] *pgd=87f91831 Internal error: Oops: 80000007 [#1] SMP ARM Modules linked in: CPU: 1 PID: 1051 Comm: cat Not tainted 4.10.0-rc5-00009-gffd8858-dirty #3 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: ed54ec00 task.stack: ee2bc000 PC is at 0x0 LR is at iio_read_channel_info_avail+0x40/0x280 pc : [<00000000>] lr : [<c06fbc1c>] psr: a0070013 sp : ee2bdda8 ip : 00000000 fp : ee2bddf4 r10: c0a53c74 r9 : ed79f000 r8 : ee8d1018 r7 : 00001000 r6 : 00000fff r5 : ee8b9a00 r4 : ed79f000 r3 : ee2bddc4 r2 : ee2bddbc r1 : c0a86dcc r0 : ee8d1000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 3cc3c04a DAC: 00000051 Process cat (pid: 1051, stack limit = 0xee2bc210) Stack: (0xee2bdda8 to 0xee2be000) dda0: ee2bddc0 00000002 c016d720 c016d394 ed54ec00 00000000 ddc0: 60070013 ed413780 00000001 edffd480 ee8b9a00 00000fff 00001000 ee8d1018 dde0: ed79f000 c0a53c74 ee2bde0c ee2bddf8 c0513c58 c06fbbe8 edffd480 edffd540 de00: ee2bde3c ee2bde10 c0293474 c0513c40 c02933e4 ee2bde60 00000001 ed413780 de20: 00000001 ed413780 00000000 edffd480 ee2bde4c ee2bde40 c0291d00 c02933f0 de40: ee2bde9c ee2bde50 c024679c c0291ce0 edffd4b0 b6e37000 00020000 ee2bdf78 de60: 00000000 00000000 ed54ec00 ed013200 00000817 c0a111fc edffd540 ed413780 de80: b6e37000 00020000 00020000 ee2bdf78 ee2bded4 ee2bdea0 c0292890 c0246604 dea0: c0117940 c016ba50 00000025 c0a111fc b6e37000 ed413780 ee2bdf78 00020000 dec0: ee2bc000 b6e37000 ee2bdf44 ee2bded8 c021d158 c0292770 c0117764 b6e36004 dee0: c0f0d7c4 ee2bdfb0 b6f89228 00021008 ee2bdfac ee2bdf00 c0101374 c0117770 df00: 00000000 00000000 ee2bc000 00000000 ee2bdf34 ee2bdf20 c016ba04 c0171080 df20: 00000000 00020000 ed413780 b6e37000 00000000 ee2bdf78 ee2bdf74 ee2bdf48 df40: c021e7a0 c021d130 c023e300 c023e280 ee2bdf74 00000000 00000000 ed413780 df60: ed413780 00020000 ee2bdfa4 ee2bdf78 c021e870 c021e71c 00000000 00000000 df80: 00020000 00020000 b6e37000 00000003 c0108084 00000000 00000000 ee2bdfa8 dfa0: c0107ee0 c021e838 00020000 00020000 00000003 b6e37000 00020000 0001a2b4 dfc0: 00020000 00020000 b6e37000 00000003 7fffe000 00000000 00000000 00020000 dfe0: 00000000 be98eb4c 0000c740 b6f1985c 60070010 00000003 00000000 00000000 Backtrace: [<c06fbbdc>] (iio_read_channel_info_avail) from [<c0513c58>] (dev_attr_show+0x24/0x50) r10:c0a53c74 r9:ed79f000 r8:ee8d1018 r7:00001000 r6:00000fff r5:ee8b9a00 r4:edffd480 [<c0513c34>] (dev_attr_show) from [<c0293474>] (sysfs_kf_seq_show+0x90/0x110) r5:edffd540 r4:edffd480 [<c02933e4>] (sysfs_kf_seq_show) from [<c0291d00>] (kernfs_seq_show+0x2c/0x30) r10:edffd480 r9:00000000 r8:ed413780 r7:00000001 r6:ed413780 r5:00000001 r4:ee2bde60 r3:c02933e4 [<c0291cd4>] (kernfs_seq_show) from [<c024679c>] (seq_read+0x1a4/0x4e0) [<c02465f8>] (seq_read) from [<c0292890>] (kernfs_fop_read+0x12c/0x1cc) r10:ee2bdf78 r9:00020000 r8:00020000 r7:b6e37000 r6:ed413780 r5:edffd540 r4:c0a111fc [<c0292764>] (kernfs_fop_read) from [<c021d158>] (__vfs_read+0x34/0x118) r10:b6e37000 r9:ee2bc000 r8:00020000 r7:ee2bdf78 r6:ed413780 r5:b6e37000 r4:c0a111fc [<c021d124>] (__vfs_read) from [<c021e7a0>] (vfs_read+0x90/0x11c) r8:ee2bdf78 r7:00000000 r6:b6e37000 r5:ed413780 r4:00020000 [<c021e710>] (vfs_read) from [<c021e870>] (SyS_read+0x44/0x90) r8:00020000 r7:ed413780 r6:ed413780 r5:00000000 r4:00000000 [<c021e82c>] (SyS_read) from [<c0107ee0>] (ret_fast_syscall+0x0/0x1c) r10:00000000 r8:c0108084 r7:00000003 r6:b6e37000 r5:00020000 r4:00020000 Code: bad PC value ---[ end trace 9c4938ccd0389004 ]--- Fixes: cc26ad45 ("iio: Add Freescale MPL3115A2 pressure / temperature sensor driver") Fixes: 51239600 ("iio:core: add a callback to allow drivers to provide _available attributes") Reported-by:
Ken Lin <ken.lin@advantech.com> Tested-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Peter Rosin authored
commit 6a6e1d56 upstream. Fixes a regression triggered by a change in the layout of struct iio_chan_spec, but the real bug is in the driver which assumed a specific structure layout in the first place. Hint: the three bits were not OR:ed together as implied by the indentation prior to this patch, there was a comma between the first two, which accidentally moved the ..._SCALE and ..._OFFSET bits to the next structure field. That field was .info_mask_shared_by_type before the _available attributes was added by commit 51239600 ("iio:core: add a callback to allow drivers to provide _available attributes") and .info_mask_separate_available afterwards, and the regression happened. info_mask_shared_by_type is actually a better choice than the originally intended info_mask_separate for the ..._SCALE and ..._OFFSET bits since a constant is returned from mpl115_read_raw for the scale/offset. Using info_mask_shared_by_type also preserves the behavior from before the regression and is therefore less likely to cause other interesting side effects. The above mentioned regression causes unintended sysfs attibutes to show up that are not backed by code, in turn causing a NULL pointer defererence to happen on access. Fixes: 3017d90e ("iio: Add Freescale MPL115A2 pressure / temperature sensor driver") Fixes: 51239600 ("iio:core: add a callback to allow drivers to provide _available attributes") Signed-off-by:
-
Marc Zyngier authored
commit 8f36ebaf upstream. When we fault in a page, we flush it to the PoC (Point of Coherency) if the faulting vcpu has its own caches off, so that it can observe the page we just brought it. But if the vcpu has its caches on, we skip that step. Bad things happen when *another* vcpu tries to access that page with its own caches disabled. At that point, there is no garantee that the data has made it to the PoC, and we access stale data. The obvious fix is to always flush to PoC when a page is faulted in, no matter what the state of the vcpu is. Fixes: 2d58b733 ("arm64: KVM: force cache clean on page fault when caches are off") Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Miklos Szeredi authored
commit 2e38bea9 upstream. fuse_file_put() was missing the "force" flag for the RELEASE request when sending synchronously (fuseblk). If this flag is not set, then a sync request may be interrupted before it is dequeued by the userspace filesystem. In this case the OPEN won't be balanced with a RELEASE. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 5a18ec17 ("fuse: fix hang of single threaded fuseblk filesystem") Signed-off-by:
-
Laura Abbott authored
commit 1c68bb0f upstream. Running with KASAN and crypto tests currently gives BUG: KASAN: global-out-of-bounds in __test_aead+0x9d9/0x2200 at addr ffffffff8212fca0 Read of size 16 by task cryptomgr_test/1107 Address belongs to variable 0xffffffff8212fca0 CPU: 0 PID: 1107 Comm: cryptomgr_test Not tainted 4.10.0+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 Call Trace: dump_stack+0x63/0x8a kasan_report.part.1+0x4a7/0x4e0 ? __test_aead+0x9d9/0x2200 ? crypto_ccm_init_crypt+0x218/0x3c0 [ccm] kasan_report+0x20/0x30 check_memory_region+0x13c/0x1a0 memcpy+0x23/0x50 __test_aead+0x9d9/0x2200 ? kasan_unpoison_shadow+0x35/0x50 ? alg_test_akcipher+0xf0/0xf0 ? crypto_skcipher_init_tfm+0x2e3/0x310 ? crypto_spawn_tfm2+0x37/0x60 ? crypto_ccm_init_tfm+0xa9/0xd0 [ccm] ? crypto_aead_init_tfm+0x7b/0x90 ? crypto_alloc_tfm+0xc4/0x190 test_aead+0x28/0xc0 alg_test_aead+0x54/0xd0 alg_test+0x1eb/0x3d0 ? alg_find_test+0x90/0x90 ? __sched_text_start+0x8/0x8 ? __wake_up_common+0x70/0xb0 cryptomgr_test+0x4d/0x60 kthread+0x173/0x1c0 ? crypto_acomp_scomp_free_ctx+0x60/0x60 ? kthread_create_on_node+0xa0/0xa0 ret_from_fork+0x2c/0x40 Memory state around the buggy address: ffffffff8212fb80: 00 00 00 00 01 fa fa fa fa fa fa fa 00 00 00 00 ffffffff8212fc00: 00 01 fa fa fa fa fa fa 00 00 00 00 01 fa fa fa >ffffffff8212fc80: fa fa fa fa 00 05 fa fa fa fa fa fa 00 00 00 00 ^ ffffffff8212fd00: 01 fa fa fa fa fa fa fa 00 00 00 00 01 fa fa fa ffffffff8212fd80: fa fa fa fa 00 00 00 00 00 05 fa fa fa fa fa fa This always happens on the same IV which is less than 16 bytes. Per Ard, "CCM IVs are 16 bytes, but due to the way they are constructed internally, the final couple of bytes of input IV are dont-cares. Apparently, we do read all 16 bytes, which triggers the KASAN errors." Fix this by padding the IV with null bytes to be at least 16 bytes. Fixes: 0bc5a6c5 ("crypto: testmgr - Disable rfc4309 test and convert test vectors") Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Christian Lamparter authored
commit c9f1e326 upstream. This patch fixes the OTP register definitions for the AR934x and AR9550 WMAC SoC. Previously, the ath9k driver was unable to initialize the integrated WMAC on an Aerohive AP121: | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: Unable to initialize hardware; initialization status: -5 | ath9k ar934x_wmac: failed to initialize device | ath9k: probe of ar934x_wmac failed with error -5 It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA definitions contain a typo. Cc: Gabor Juhos <juhosg@openwrt.org> Fixes: add295a4 "ath9k: use correct OTP register offsets for AR9550" Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Chris Blake <chrisrblake93@gmail.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Felix Fietkau authored
commit 3a5e969b upstream. The code currently relies on refcounting to disable IRQs from within the IRQ handler and re-enabling them again after the tasklet has run. However, due to race conditions sometimes the IRQ handler might be called twice, or the tasklet may not run at all (if interrupted in the middle of a reset). This can cause nasty imbalances in the irq-disable refcount which will get the driver permanently stuck until the entire radio has been stopped and started again (ath_reset will not recover from this). Instead of using this fragile logic, change the code to ensure that running the irq handler during tasklet processing is safe, and leave the refcount untouched. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Felix Fietkau authored
commit a70e1d6f upstream. Simply return -EOPNOTSUPP instead. Signed-off-by:
-
Nicholas Bellinger authored
commit 01d4d673 upstream. This patch addresses a long-standing bug with multi-session (eg: iscsi-target + iser-target) se_node_acl dynamic free withini transport_deregister_session(). This bug is caused when a storage endpoint is configured with demo-mode (generate_node_acls = 1 + cache_dynamic_acls = 1) initiators, and initiator login creates a new dynamic node acl and attaches two sessions to it. After that, demo-mode for the storage instance is disabled via configfs (generate_node_acls = 0 + cache_dynamic_acls = 0) and the existing dynamic acl is never converted to an explicit ACL. The end result is dynamic acl resources are released twice when the sessions are shutdown in transport_deregister_session(). If the storage instance is not changed to disable demo-mode, or the dynamic acl is converted to an explict ACL, or there is only a single session associated with the dynamic ACL, the bug is not triggered. To address this big, move the release of dynamic se_node_acl memory into target_complete_nacl() so it's only freed once when se_node_acl->acl_kref reaches zero. (Drop unnecessary list_del_init usage - HCH) Reported-by:
Rob Millner <rlm@daterainc.com> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
