Docs/manual.texi

    replication updates
sql/opt_range.h
    fixed compiler warning
sql/slave.cc
    fixed handling of long usernames
    fixed insert_id + query log event processing atomicity in the case
    of slave death
    fix edcharset coversion to not be global to all threads
sql/sql_class.h
    fix to make insert_id event and the subsequent query event be still processed
    atomically if slave dies in the middle
sql/sql_select.cc
    temp fix to make it compile 
repl-tests/test-auto-inc/run.test@1.1
    New BitKeeper file ``repl-tests/test-auto-inc/run.test''
repl-tests/test-auto-inc/x.master@1.1
    New BitKeeper file ``repl-tests/test-auto-inc/x.master''

Docs/manual.texi

@@ -24590,6 +24590,16 @@ master-password=<replication user password>
 
 replacting the values in <> with what is relevant to your system.
 
+Starting in version 3.23.26, you must also have on both master and 
+slave 
+
+@example
+server-id=<some unique number between 1 and 2^32-1>
+@end example
+
+@code{server-id} must be different for each server participating in
+replication
+
 @item Restart the slave(s)
 
 @end itemize
@@ -24616,6 +24626,13 @@ propogation. @code{LOAD LOCAL DATA INFILE} will be skipped.
 @item
 Update queries that use user variables are not replication-safe (yet)
 @item
+Starting in 3.23.26, it is safe to connect servers in a circular
+master-slave relationship with @code{log-slave-updates} enabled. 
+Note, however, that many queries will not work right in this kind of
+setup unless your client code is written to take care of the potential
+problems that can happen from updates that occur in different sequence
+on different servers
+@item
 If the query on the slave gets an error, the slave thread will
 terminate, and a message will appear in @code{.err} file. You should
 then connect to the slave manually, fix the cause of the error
@@ -24649,13 +24666,6 @@ replication (binary) logging on the master, and @code{SET SQL_LOG_BIN =
 1} will turn in back on - you must have the process privilege to do
 this.
 @item
-The slave thread does not log updates to the binary log of the slave,
-so it is possible to couple two servers in a mutual master-slave
-relationship. You can actually set up a load balancing scheme and do
-queries safely on either of the servers. Just do not expect to do LOCK
-TABLES on one server, then connect to the other and still have that
-lock :-) .
-@item
 Starting in 3.23.19 you can clean up stale replication leftovers when
 something goes wrong and you want a clean start with @code{FLUSH MASTER}
 and @code{FLUSH SLAVE} commands
@@ -24668,6 +24678,10 @@ TO }
 @item
 Starting in 3.23.23, you tell the master that updates in certain
 databases should not be logged to the binary log with @code{binlog-ignore-db}
+@item 
+Starting in 3.23.26, you can use @code{replicate-rewrite-db} to tell
+the slave to apply updates from one database on the master to the one
+with a different name on the slave
 @end itemize
 
 @node Replication Options, Replication SQL, Replication Features, Replication
@@ -24783,6 +24797,22 @@ exclude all others not explicitly mentioned.
 to the binary log 
 (Set on @strong{Master}, Example: @code{binlog-ignore-db=some_database})
 
+@item
+@code{replicate-rewrite-db}
+ @tab Tells the slave to apply updates to a database with a different
+name than the original ( Set on @strong{Slave}, Example: 
+@code{replicate-rewrite-db=master_db_name->slave_db_name}
+
+@item
+@code{skip-slave-start}
+ @tab Tells the slave server not to start the slave on the startup.
+The user can start it later with @code{SLAVE START}
+
+@item
+@code{server-id}
+ @tab Sets the unique replicaiton numeric server id. You should pick one  to assign.
+The range is from 1 to 2^32-1. (Set on both @strong{Master} and 
+@strong{Slave}. Example: @code{server-id=3})
 @end multitable
 
 @cindex SQL commands, replication
@@ -24888,9 +24918,26 @@ it up from @code{pthread_cond_wait()}.  In the meantime, the slave
 could have opened another connection, which resulted in another 
 @code{Binlog_Dump} thread.
 
-Once we add @strong{server_id} variable for each server that 
-participates in replication, we will fix @code{Binlog_Dump} thread to
-kill all the zombies from the same slave on reconnect.
+The above problem should not be present in 3.23.26 and later versions.
+In 3.23.26 we added @code{server-id} to each replication server, and 
+now all the old zombie threads are killed on the master when a new replication thread
+connects from the same slave
+
+@strong{Q}: How do I upgrade on a hot replication setup?
+@strong{A}: If you are upgrading  pre-3.23.26 versions, you should just
+lock the master tables, let the slave catch up, then run @code{FLUSH
+MASTER} on the master, and @code{FLUSH SLAVE} on the slave to reset the
+logs, then restart new versions of the master and the slave. Note that
+the slave can stay down for some time - since the master is logging 
+all the updates, the slave will be able to catch up once it is up and
+can connect.
+
+We plan to make post 3.23.26 versions to be backwards compatible 
+for replication down to 3.23.26, so upgrade should be just a matter
+of plug and play. Of course, as one joke goes, plug and play works 
+usually only 50% of the time - just the plug part. We hope to do much
+better than that, though. 
+ 
 
 @cindex replication, two-way
 @strong{Q}: What issues should I be aware of when setting up two-way
@@ -37858,6 +37905,26 @@ though, so 3.23 is not released as a stable version yet.
 @appendixsubsec Changes in release 3.23.26
 @itemize @bullet
 @item
+Fixed mutex bug in the binary replication log - long update queries could
+be read only in part by the slave if it did it at the wrong time, which
+was not fatal, but resulted in a performance-degrading reconnect and
+a scary message in the error log
+@item
+Changed the format of the binary log - added magic number, server 
+version, binlog version. Added server id and query error code for each query event
+@item 
+Replication thread from the slave will now kill all the stale threads
+from the same server
+@item 
+Long replication user names were not being handled properly
+@item
+Added --replicate-rewrite-db
+@item
+Added --skip-slave-start
+@item
+Updates that generated an error code ( such as INSERT INTO foo(some_key)
+ values (1),(1);) erroneously terminated the slave thread
+@item
 Added optimization of queries where @code{DISTINCT} is only used on columns
 from some of the tables.
 @item

repl-tests/test-auto-inc/run.test

+source ../include/master-slave.inc;
+connection master;
+drop table if exists x;
+create table x(n int auto_increment primary key);
+set insert_id = 2000;
+insert into x values (NULL),(NULL),(NULL);
+connection slave;
+sleep 3;
+@x.master select * from x;
+ 

repl-tests/test-auto-inc/x.master

+n	
+2000	
+2001	
+2002	

sql/opt_range.h

@@ -71,7 +71,7 @@ public:
   double read_time;
 
   QUICK_SELECT(TABLE *table,uint index_arg,bool no_alloc=0);
-  ~QUICK_SELECT();
+  virtual ~QUICK_SELECT(); // fixed by Sasha needs to be virtual
   void reset(void) { next=0; it.rewind(); }
   virtual int init() { return 0; }
   virtual int get_next();

sql/slave.cc

@@ -126,7 +126,12 @@ static void init_strvar_from_file(char* var, int max_size, FILE* f,
 
   if(fgets(var, max_size, f)) 
     {
-       *(strend(var)-1) = 0;
+      char* last_p = strend(var) - 1;
+      if(*last_p == '\n') *last_p = 0; // if we stopped on newline, kill it
+      else
+	while( (fgetc(f) != '\n' && !feof(f)));
+      // if we truncated a line or stopped on last char, remove all chars
+      // up to and including newline
     }
   else if(default_val)
    strmake(var,  default_val, max_size);
@@ -302,11 +307,11 @@ int init_master_info(MASTER_INFO* mi)
       mi->file = file;
       
       if(master_host)
-        strmake(mi->host, master_host, sizeof(mi->host));
+        strmake(mi->host, master_host, sizeof(mi->host) - 1);
       if(master_user)
-        strmake(mi->user, master_user, sizeof(mi->user));
+        strmake(mi->user, master_user, sizeof(mi->user) - 1);
       if(master_password)
-        strmake(mi->password, master_password, sizeof(mi->password));
+        strmake(mi->password, master_password, sizeof(mi->password) - 1);
       mi->port = master_port;
       mi->connect_retry = master_connect_retry;
       
@@ -635,6 +640,8 @@ static int exec_event(THD* thd, NET* net, MASTER_INFO* mi, int event_len)
       }
       thd->db = 0;// prevent db from being freed
       thd->query = 0; // just to be sure
+      thd->convert_set = 0; // assume no convert for next query
+      // unless set explictly
       close_thread_tables(thd);
       free_root(&thd->mem_root,0);
       if (thd->query_error)
@@ -801,8 +808,7 @@ static int exec_event(THD* thd, NET* net, MASTER_INFO* mi, int event_len)
 	break;
 		
       }
-      mi->inc_pos(event_len);
-      flush_master_info(mi);
+      mi->inc_pending(event_len);
       break;
     }
     }

sql/sql_class.h

@@ -45,7 +45,7 @@ typedef struct st_log_info
 typedef struct st_master_info
 {
   char log_file_name[FN_REFLEN];
-  ulonglong pos;
+  ulonglong pos,pending;
   FILE* file; // we keep the file open, so we need to remember the file pointer
 
   // the variables below are needed because we can change masters on the fly
@@ -57,11 +57,18 @@ typedef struct st_master_info
   pthread_mutex_t lock;
   bool inited;
 
-  st_master_info():inited(0) { host[0] = 0; user[0] = 0; password[0] = 0;}
+  st_master_info():inited(0),pending(0)
+  { host[0] = 0; user[0] = 0; password[0] = 0;}
+  
+  inline void inc_pending(ulonglong val)
+  {
+    pending += val;
+  }
   inline void inc_pos(ulonglong val)
   {
     pthread_mutex_lock(&lock);
-    pos += val;
+    pos += val + pending;
+    pending = 0;
     pthread_mutex_unlock(&lock);
   }
   // thread safe read of position - not needed if we are in the slave thread,

sql/sql_select.cc

@@ -23,7 +23,11 @@
 
 #include "mysql_priv.h"
 #include "sql_select.h"
-#include "opt_ft.h"
+
+#if 0 // Sergei - remove when fixed
+#include "opt_ft.h" 
+#endif
+
 #include <m_ctype.h>
 #include <hash.h>
 #include <ft_global.h>
@@ -5045,6 +5049,11 @@ test_if_skip_sort_order(JOIN_TAB *tab,ORDER *order,ha_rows select_limit)
   DBUG_RETURN(0);				// Can't use index.
 }
 
+// Sergei - remove this one when you have added opt_ft stuff
+QUICK_SELECT *get_ft_or_quick_select_for_ref(TABLE *table, JOIN_TAB *tab)
+{
+  return  get_quick_select_for_ref(table, &tab->ref);
+}
 
 static int
 create_sort_index(JOIN_TAB *tab,ORDER *order,ha_rows select_limit)