Merge snake-hub.snake.net:/src/extern/MySQL/bk/mysql-5.0

into  snake-hub.snake.net:/src/extern/MySQL/bk/mysql-5.1

sql/mysqld.cc

@@ -4864,8 +4864,6 @@ struct my_option my_long_options[] =
    (gptr*) &abort_slave_event_count,  (gptr*) &abort_slave_event_count,
    0, GET_INT, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
 #endif /* HAVE_REPLICATION */
-  {"ansi", 'a', "Use ANSI SQL syntax instead of MySQL syntax. This mode will also set transaction isolation level 'serializable'.", 0, 0, 0,
-   GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
   {"allow-suspicious-udfs", OPT_ALLOW_SUSPICIOUS_UDFS,
    "Allows use of UDFs consisting of only one symbol xxx() "
    "without corresponding xxx_init() or xxx_deinit(). That also means "
@@ -4873,6 +4871,8 @@ struct my_option my_long_options[] =
    "from libc.so",
    (gptr*) &opt_allow_suspicious_udfs, (gptr*) &opt_allow_suspicious_udfs,
    0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
+  {"ansi", 'a', "Use ANSI SQL syntax instead of MySQL syntax. This mode will also set transaction isolation level 'serializable'.", 0, 0, 0,
+   GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
   {"auto-increment-increment", OPT_AUTO_INCREMENT,
    "Auto-increment columns are incremented by this",
    (gptr*) &global_system_variables.auto_increment_increment,
@@ -5175,16 +5175,16 @@ Disable with --skip-innodb-doublewrite.", (gptr*) &innobase_use_doublewrite,
    "Enable SHOW INNODB STATUS output in the innodb_status.<pid> file",
    (gptr*) &innobase_create_status_file, (gptr*) &innobase_create_status_file,
    0, GET_BOOL, OPT_ARG, 0, 0, 0, 0, 0, 0},
-  {"innodb_table_locks", OPT_INNODB_TABLE_LOCKS,
-   "Enable InnoDB locking in LOCK TABLES",
-   (gptr*) &global_system_variables.innodb_table_locks,
-   (gptr*) &global_system_variables.innodb_table_locks,
-   0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0},
   {"innodb_support_xa", OPT_INNODB_SUPPORT_XA,
    "Enable InnoDB support for the XA two-phase commit",
    (gptr*) &global_system_variables.innodb_support_xa,
    (gptr*) &global_system_variables.innodb_support_xa,
    0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0},
+  {"innodb_table_locks", OPT_INNODB_TABLE_LOCKS,
+   "Enable InnoDB locking in LOCK TABLES",
+   (gptr*) &global_system_variables.innodb_table_locks,
+   (gptr*) &global_system_variables.innodb_table_locks,
+   0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0},
 #endif /* End WITH_INNOBASE_STORAGE_ENGINE */
   {"isam", OPT_ISAM, "Obsolete. ISAM storage engine is no longer supported.",
    (gptr*) &opt_isam, (gptr*) &opt_isam, 0, GET_BOOL, NO_ARG, 0, 0, 0,
@@ -5535,12 +5535,6 @@ thread is in the relay logs.",
   {"replicate-rewrite-db", OPT_REPLICATE_REWRITE_DB,
    "Updates to a database with a different name than the original. Example: replicate-rewrite-db=master_db_name->slave_db_name.",
    0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
-  {"replicate-wild-do-table", OPT_REPLICATE_WILD_DO_TABLE,
-   "Tells the slave thread to restrict replication to the tables that match the specified wildcard pattern. To specify more than one table, use the directive multiple times, once for each table. This will work for cross-database updates. Example: replicate-wild-do-table=foo%.bar% will replicate only updates to tables in all databases that start with foo and whose table names start with bar.",
-   0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
-  {"replicate-wild-ignore-table", OPT_REPLICATE_WILD_IGNORE_TABLE,
-   "Tells the slave thread to not replicate to the tables that match the given wildcard pattern. To specify more than one table to ignore, use the directive multiple times, once for each table. This will work for cross-database updates. Example: replicate-wild-ignore-table=foo%.bar% will not do updates to tables in databases that start with foo and whose table names start with bar.",
-   0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
 #ifdef HAVE_REPLICATION
   {"replicate-same-server-id", OPT_REPLICATE_SAME_SERVER_ID,
    "In replication, if set to 1, do not skip events having our server id. \
@@ -5550,6 +5544,12 @@ Can't be set to 1 if --log-slave-updates is used.",
    (gptr*) &replicate_same_server_id,
    0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
 #endif
+  {"replicate-wild-do-table", OPT_REPLICATE_WILD_DO_TABLE,
+   "Tells the slave thread to restrict replication to the tables that match the specified wildcard pattern. To specify more than one table, use the directive multiple times, once for each table. This will work for cross-database updates. Example: replicate-wild-do-table=foo%.bar% will replicate only updates to tables in all databases that start with foo and whose table names start with bar.",
+   0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
+  {"replicate-wild-ignore-table", OPT_REPLICATE_WILD_IGNORE_TABLE,
+   "Tells the slave thread to not replicate to the tables that match the given wildcard pattern. To specify more than one table to ignore, use the directive multiple times, once for each table. This will work for cross-database updates. Example: replicate-wild-ignore-table=foo%.bar% will not do updates to tables in databases that start with foo and whose table names start with bar.",
+   0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
   // In replication, we may need to tell the other servers how to connect
   {"report-host", OPT_REPORT_HOST,
    "Hostname or IP of the slave to be reported to to the master during slave registration. Will appear in the output of SHOW SLAVE HOSTS. Leave unset if you do not want the slave to register itself with the master. Note that it is not sufficient for the master to simply read the IP of the slave off the socket once the slave connects. Due to NAT and other routing issues, that IP may not be valid for connecting to the slave from the master or other hosts.",
@@ -5791,6 +5791,11 @@ log and this option does nothing anymore.",
     "What size queue (in rows) should be allocated for handling INSERT DELAYED. If the queue becomes full, any client that does INSERT DELAYED will wait until there is room in the queue again.",
     (gptr*) &delayed_queue_size, (gptr*) &delayed_queue_size, 0, GET_ULONG,
     REQUIRED_ARG, DELAYED_QUEUE_SIZE, 1, ~0L, 0, 1, 0},
+  {"div_precision_increment", OPT_DIV_PRECINCREMENT,
+   "Precision of the result of '/' operator will be increased on that value.",
+   (gptr*) &global_system_variables.div_precincrement,
+   (gptr*) &max_system_variables.div_precincrement, 0, GET_ULONG,
+   REQUIRED_ARG, 4, 0, DECIMAL_MAX_SCALE, 0, 0, 0},
   {"expire_logs_days", OPT_EXPIRE_LOGS_DAYS,
    "If non-zero, binary logs will be purged after expire_logs_days "
    "days; possible purges happen at startup and at binary log rotation.",
@@ -5846,6 +5851,10 @@ log and this option does nothing anymore.",
    (gptr*) &innobase_buffer_pool_size, (gptr*) &innobase_buffer_pool_size, 0,
    GET_LL, REQUIRED_ARG, 8*1024*1024L, 1024*1024L, LONGLONG_MAX, 0,
    1024*1024L, 0},
+  {"innodb_commit_concurrency", OPT_INNODB_THREAD_CONCURRENCY,
+   "Helps in performance tuning in heavily concurrent environments.",
+   (gptr*) &srv_commit_concurrency, (gptr*) &srv_commit_concurrency,
+   0, GET_LONG, REQUIRED_ARG, 0, 0, 1000, 0, 1, 0},
   {"innodb_concurrency_tickets", OPT_INNODB_CONCURRENCY_TICKETS,
    "Number of times a thread is allowed to enter InnoDB within the same \
     SQL query after it has once got the ticket",
@@ -5895,10 +5904,6 @@ log and this option does nothing anymore.",
    "Helps in performance tuning in heavily concurrent environments.",
    (gptr*) &srv_thread_concurrency, (gptr*) &srv_thread_concurrency,
    0, GET_LONG, REQUIRED_ARG, 20, 1, 1000, 0, 1, 0},
-  {"innodb_commit_concurrency", OPT_INNODB_THREAD_CONCURRENCY,
-   "Helps in performance tuning in heavily concurrent environments.",
-   (gptr*) &srv_commit_concurrency, (gptr*) &srv_commit_concurrency,
-   0, GET_LONG, REQUIRED_ARG, 0, 0, 1000, 0, 1, 0},
   {"innodb_thread_sleep_delay", OPT_INNODB_THREAD_SLEEP_DELAY,
    "Time of innodb thread sleeping before joining InnoDB queue (usec). Value 0"
     " disable a sleep",
@@ -6019,6 +6024,11 @@ The minimum value for this variable is 4096.",
    (gptr*) &global_system_variables.max_sort_length,
    (gptr*) &max_system_variables.max_sort_length, 0, GET_ULONG,
    REQUIRED_ARG, 1024, 4, 8192*1024L, 0, 1, 0},
+  {"max_sp_recursion_depth", OPT_MAX_SP_RECURSION_DEPTH,
+   "Maximum stored procedure recursion depth. (discussed with docs).",
+   (gptr*) &global_system_variables.max_sp_recursion_depth,
+   (gptr*) &max_system_variables.max_sp_recursion_depth, 0, GET_ULONG,
+   OPT_ARG, 0, 0, 255, 0, 1, 0 },
   {"max_tmp_tables", OPT_MAX_TMP_TABLES,
    "Maximum number of temporary tables a client can keep open at a time.",
    (gptr*) &global_system_variables.max_tmp_tables,
@@ -6183,21 +6193,11 @@ The minimum value for this variable is 4096.",
    (gptr*) &max_system_variables.read_rnd_buff_size, 0,
    GET_ULONG, REQUIRED_ARG, 256*1024L, IO_SIZE*2+MALLOC_OVERHEAD,
    ~0L, MALLOC_OVERHEAD, IO_SIZE, 0},
-  {"div_precision_increment", OPT_DIV_PRECINCREMENT,
-   "Precision of the result of '/' operator will be increased on that value.",
-   (gptr*) &global_system_variables.div_precincrement,
-   (gptr*) &max_system_variables.div_precincrement, 0, GET_ULONG,
-   REQUIRED_ARG, 4, 0, DECIMAL_MAX_SCALE, 0, 0, 0},
   {"record_buffer", OPT_RECORD_BUFFER,
    "Alias for read_buffer_size",
    (gptr*) &global_system_variables.read_buff_size,
    (gptr*) &max_system_variables.read_buff_size,0, GET_ULONG, REQUIRED_ARG,
    128*1024L, IO_SIZE*2+MALLOC_OVERHEAD, ~0L, MALLOC_OVERHEAD, IO_SIZE, 0},
-  {"max_sp_recursion_depth", OPT_MAX_SP_RECURSION_DEPTH,
-   "Maximum stored procedure recursion depth. (discussed with docs).",
-   (gptr*) &global_system_variables.max_sp_recursion_depth,
-   (gptr*) &max_system_variables.max_sp_recursion_depth, 0, GET_ULONG,
-   OPT_ARG, 0, 0, 255, 0, 1, 0 },
 #ifdef HAVE_REPLICATION
   {"relay_log_purge", OPT_RELAY_LOG_PURGE,
    "0 = do not purge relay logs. 1 = purge them as soon as they are no more needed.",