Copy built-in InnoDB tests to mysql-test/suite/innodb_plugin.

mysql-test/suite/innodb_plugin/r/innodb-autoinc-optimize.result

+drop table if exists t1;
+create table t1(a int not null auto_increment primary key) engine=innodb;
+insert into t1 set a = -1;
+optimize table t1;
+Table	Op	Msg_type	Msg_text
+test.t1	optimize	note	Table does not support optimize, doing recreate + analyze instead
+test.t1	optimize	status	OK
+==== clean up ====
+DROP TABLE t1;

mysql-test/suite/innodb_plugin/r/innodb_autoinc_lock_mode_zero.result

+drop table if exists t1;
+CREATE TABLE t1 (
+id int(11) NOT NULL auto_increment,
+ggid varchar(32) binary DEFAULT '' NOT NULL,
+email varchar(64) DEFAULT '' NOT NULL,
+passwd varchar(32) binary DEFAULT '' NOT NULL,
+PRIMARY KEY (id),
+UNIQUE ggid (ggid)
+) ENGINE=innodb;
+insert into t1 (ggid,passwd) values ('test1','xxx');
+insert into t1 (ggid,passwd) values ('test2','yyy');
+insert into t1 (ggid,passwd) values ('test2','this will fail');
+ERROR 23000: Duplicate entry 'test2' for key 'ggid'
+insert into t1 (ggid,id) values ('this will fail',1);
+ERROR 23000: Duplicate entry '1' for key 'PRIMARY'
+select * from t1 where ggid='test1';
+id	ggid	email	passwd
+1	test1		xxx
+select * from t1 where passwd='xxx';
+id	ggid	email	passwd
+1	test1		xxx
+select * from t1 where id=2;
+id	ggid	email	passwd
+2	test2		yyy
+replace into t1 (ggid,id) values ('this will work',1);
+replace into t1 (ggid,passwd) values ('test2','this will work');
+update t1 set id=100,ggid='test2' where id=1;
+ERROR 23000: Duplicate entry 'test2' for key 'ggid'
+select * from t1;
+id	ggid	email	passwd
+1	this will work		
+3	test2		this will work
+select * from t1 where id=1;
+id	ggid	email	passwd
+1	this will work		
+select * from t1 where id=999;
+id	ggid	email	passwd
+drop table t1;
+End of tests

mysql-test/suite/innodb_plugin/r/innodb_bug42419.result

+CREATE TABLE t1 (a INT AUTO_INCREMENT PRIMARY KEY, b INT) ENGINE = InnoDB;
+INSERT INTO t1 VALUES (1,1),(2,2),(3,3);
+COMMIT;
+SET AUTOCOMMIT = 0;
+CREATE TEMPORARY TABLE t1_tmp ( b INT );
+INSERT INTO t1_tmp (b) SELECT b FROM t1 WHERE a = 3;
+INSERT INTO t1_tmp (b) SELECT b FROM t1 WHERE a = 2;
+SET AUTOCOMMIT = 0;
+CREATE TEMPORARY TABLE t2_tmp ( a int, new_a int );
+INSERT INTO t2_tmp VALUES (1,51),(2,52),(3,53);
+UPDATE t1 SET a = (SELECT new_a FROM t2_tmp WHERE t2_tmp.a = t1.a) WHERE a = 1;
+UPDATE t1 SET a = (SELECT new_a FROM t2_tmp WHERE t2_tmp.a = t1.a) WHERE a = 2;
+INSERT INTO t1_tmp (b) SELECT b FROM t1 WHERE a = 1;
+ERROR 40001: Deadlock found when trying to get lock; try restarting transaction
+Reap the server message for connection user2 UPDATE t1 ...
+UPDATE t1 SET a = (SELECT new_a FROM t2_tmp WHERE t2_tmp.a = t1.a) WHERE a = 3;
+DROP TABLE t1;

mysql-test/suite/innodb_plugin/r/innodb_lock_wait_timeout_1.result

+#
+# Bug #40113: Embedded SELECT inside UPDATE or DELETE can timeout 
+#  without error
+#
+CREATE TABLE t1 (a int, b int, PRIMARY KEY  (a,b)) ENGINE=InnoDB;
+INSERT INTO t1 (a,b) VALUES (1070109,99);
+CREATE TABLE t2 (b int, a int, PRIMARY KEY (b)) ENGINE=InnoDB;
+INSERT INTO t2 (b,a) VALUES (7,1070109);
+SELECT * FROM t1;
+a	b
+1070109	99
+BEGIN;
+SELECT b FROM t2 WHERE b=7 FOR UPDATE;
+b
+7
+BEGIN;
+SELECT b FROM t2 WHERE b=7 FOR UPDATE;
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+INSERT INTO t1 (a) VALUES ((SELECT a FROM t2 WHERE b=7));
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+UPDATE t1 SET a='7000000' WHERE a=(SELECT a FROM t2 WHERE b=7);
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+DELETE FROM t1 WHERE a=(SELECT a FROM t2 WHERE b=7);
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+SELECT * FROM t1;
+a	b
+1070109	99
+DROP TABLE t2, t1;
+# End of 5.0 tests
+#
+# Bug#46539 Various crashes on INSERT IGNORE SELECT + SELECT
+#           FOR UPDATE
+#
+drop table if exists t1;
+create table t1 (a int primary key auto_increment,
+b int, index(b)) engine=innodb;
+insert into t1 (b) values (1), (2), (3), (4), (5), (6), (7), (8), (9), (10);
+set autocommit=0;
+begin;
+select * from t1 where b=5 for update;
+a	b
+5	5
+insert ignore into t1 (b) select a as b from t1;
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+# Cleanup
+#
+commit;
+set autocommit=default;
+drop table t1;
+#
+# Bug #37183 insert ignore into .. select ... hangs 
+#            after deadlock was encountered
+#
+create table t1(id int primary key,v int)engine=innodb;
+insert into t1 values (1,1),(2,2),(3,3),(4,4),(5,5),(6,6),(7,7);
+create table t2 like t1;
+begin;
+update t1 set v=id*2 where id=1;
+begin;
+update t1 set v=id*2 where id=2;
+update t1 set v=id*2 where id=2;
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+insert ignore into t2 select * from t1 where id=1;
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+rollback;
+rollback;
+drop table t1, t2;
+#
+# Bug#41756 Strange error messages about locks from InnoDB
+#
+drop table if exists t1;
+# In the default transaction isolation mode, and/or with
+# innodb_locks_unsafe_for_binlog=OFF, handler::unlock_row()
+# in InnoDB does nothing.
+# Thus in order to reproduce the condition that led to the
+# warning, one needs to relax isolation by either
+# setting a weaker tx_isolation value, or by turning on
+# the unsafe replication switch.
+# For testing purposes, choose to tweak the isolation level,
+# since it's settable at runtime, unlike
+# innodb_locks_unsafe_for_binlog, which is
+# only a command-line switch.
+#
+set @@session.tx_isolation="read-committed";
+# Prepare data. We need a table with a unique index,
+# for join_read_key to be used. The other column
+# allows to control what passes WHERE clause filter.
+create table t1 (a int primary key, b int) engine=innodb;
+# Let's make sure t1 has sufficient amount of rows
+# to exclude JT_ALL access method when reading it,
+# i.e. make sure that JT_EQ_REF(a) is always preferred.
+insert into t1 values (1,1), (2,null), (3,1), (4,1),
+(5,1), (6,1), (7,1), (8,1), (9,1), (10,1),
+(11,1), (12,1), (13,1), (14,1), (15,1),
+(16,1), (17,1), (18,1), (19,1), (20,1);
+#
+# Demonstrate that for the SELECT statement
+# used later in the test JT_EQ_REF access method is used.
+#
+explain
+select 1 from t1 natural join (select 2 as a, 1 as b union all
+select 2 as a, 2 as b) as t2 for update;
+id	1
+select_type	PRIMARY
+table	<derived2>
+type	ALL
+possible_keys	NULL
+key	NULL
+key_len	NULL
+ref	NULL
+rows	2
+Extra	
+id	1
+select_type	PRIMARY
+table	t1
+type	eq_ref
+possible_keys	PRIMARY
+key	PRIMARY
+key_len	4
+ref	t2.a
+rows	1
+Extra	Using where
+id	2
+select_type	DERIVED
+table	NULL
+type	NULL
+possible_keys	NULL
+key	NULL
+key_len	NULL
+ref	NULL
+rows	NULL
+Extra	No tables used
+id	3
+select_type	UNION
+table	NULL
+type	NULL
+possible_keys	NULL
+key	NULL
+key_len	NULL
+ref	NULL
+rows	NULL
+Extra	No tables used
+id	NULL
+select_type	UNION RESULT
+table	<union2,3>
+type	ALL
+possible_keys	NULL
+key	NULL
+key_len	NULL
+ref	NULL
+rows	NULL
+Extra	
+#
+# Demonstrate that the reported SELECT statement
+# no longer produces warnings.
+#
+select 1 from t1 natural join (select 2 as a, 1 as b union all
+select 2 as a, 2 as b) as t2 for update;
+1
+commit;
+# 
+# Demonstrate that due to lack of inter-sweep "reset" function,
+# we keep some non-matching records locked, even though we know
+# we could unlock them.
+# To do that, show that if there is only one distinct value
+# for a in t2 (a=2), we will keep record (2,null) in t1 locked.
+# But if we add another value for "a" to t2, say 6,
+# join_read_key cache will be pruned at least once, 
+# and thus record (2, null) in t1 will get unlocked.
+#
+begin;
+select 1 from t1 natural join (select 2 as a, 1 as b union all
+select 2 as a, 2 as b) as t2 for update;
+1
+#
+# Switching to connection con1
+# We should be able to delete all records from t1 except (2, null),
+# since they were not locked.
+begin;
+# Delete in series of 3 records so that full scan
+# is not used and we're not blocked on record (2,null)
+delete from t1 where a in (1,3,4);
+delete from t1 where a in (5,6,7);
+delete from t1 where a in (8,9,10);
+delete from t1 where a in (11,12,13);
+delete from t1 where a in (14,15,16);
+delete from t1 where a in (17,18);
+delete from t1 where a in (19,20);
+# 
+# Record (2, null) is locked. This is actually unnecessary, 
+# because the previous select returned no rows. 
+# Just demonstrate the effect.
+#
+delete from t1;
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+rollback;
+#
+# Switching to connection default
+#
+# Show that the original contents of t1 is intact:
+select * from t1;
+a	b
+1	1
+2	NULL
+3	1
+4	1
+5	1
+6	1
+7	1
+8	1
+9	1
+10	1
+11	1
+12	1
+13	1
+14	1
+15	1
+16	1
+17	1
+18	1
+19	1
+20	1
+commit;
+#
+# Have a one more record in t2 to show that 
+# if join_read_key cache is purned, the current
+# row under the cursor is unlocked (provided, this row didn't 
+# match the partial WHERE clause, of course).
+# Sic: the result of this test dependent on the order of retrieval
+# of records --echo # from the derived table, if !
+# We use DELETE to disable the JOIN CACHE. This DELETE modifies no
+# records. It also should leave no InnoDB row locks.
+#
+begin;
+delete t1.* from t1 natural join (select 2 as a, 2 as b union all
+select 0 as a, 0 as b) as t2;
+# Demonstrate that nothing was deleted form t1
+select * from t1;
+a	b
+1	1
+2	NULL
+3	1
+4	1
+5	1
+6	1
+7	1
+8	1
+9	1
+10	1
+11	1
+12	1
+13	1
+14	1
+15	1
+16	1
+17	1
+18	1
+19	1
+20	1
+#
+# Switching to connection con1
+begin;
+# Since there is another distinct record in the derived table
+# the previous matching record in t1 -- (2,null) -- was unlocked.
+delete from t1;
+# We will need the contents of the table again.
+rollback;
+select * from t1;
+a	b
+1	1
+2	NULL
+3	1
+4	1
+5	1
+6	1
+7	1
+8	1
+9	1
+10	1
+11	1
+12	1
+13	1
+14	1
+15	1
+16	1
+17	1
+18	1
+19	1
+20	1
+commit;
+#
+# Switching to connection default
+rollback;
+begin;
+#
+# Before this patch, we could wrongly unlock a record
+# that was cached and later used in a join. Demonstrate that
+# this is no longer the case.
+# Sic: this test is also order-dependent (i.e. the
+# the bug would show up only if the first record in the union
+# is retreived and processed first.
+#
+# Verify that JT_EQ_REF is used.
+explain
+select 1 from t1 natural join (select 3 as a, 2 as b union all
+select 3 as a, 1 as b) as t2 for update;
+id	1
+select_type	PRIMARY
+table	<derived2>
+type	ALL
+possible_keys	NULL
+key	NULL
+key_len	NULL
+ref	NULL
+rows	2
+Extra	
+id	1
+select_type	PRIMARY
+table	t1
+type	eq_ref
+possible_keys	PRIMARY
+key	PRIMARY
+key_len	4
+ref	t2.a
+rows	1
+Extra	Using where
+id	2
+select_type	DERIVED
+table	NULL
+type	NULL
+possible_keys	NULL
+key	NULL
+key_len	NULL
+ref	NULL
+rows	NULL
+Extra	No tables used
+id	3
+select_type	UNION
+table	NULL
+type	NULL
+possible_keys	NULL
+key	NULL
+key_len	NULL
+ref	NULL
+rows	NULL
+Extra	No tables used
+id	NULL
+select_type	UNION RESULT
+table	<union2,3>
+type	ALL
+possible_keys	NULL
+key	NULL
+key_len	NULL
+ref	NULL
+rows	NULL
+Extra	
+# Lock the record.
+select 1 from t1 natural join (select 3 as a, 2 as b union all
+select 3 as a, 1 as b) as t2 for update;
+1
+1
+# Switching to connection con1
+#
+# We should not be able to delete record (3,1) from t1,
+# (previously it was possible).
+#
+delete from t1 where a=3;
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+# Switching to connection default
+commit;
+set @@session.tx_isolation=default;
+drop table t1;
+#
+# End of 5.1 tests
+#

mysql-test/suite/innodb_plugin/r/innodb_mysql_rbk.result

+CREATE TABLE t1(a INT, b INT NOT NULL, PRIMARY KEY (a)) ENGINE=innodb
+DEFAULT CHARSET=latin1;
+INSERT INTO t1 VALUES (1,1),(2,2),(3,3),(4,4),(5,5),(6,6),(7,7);
+START TRANSACTION;
+SELECT * FROM t1 WHERE b=3 LIMIT 1 FOR UPDATE;
+a	b
+3	3
+START TRANSACTION;
+UPDATE t1 SET b=b+12 WHERE a > 2 ORDER BY a;
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+ROLLBACK;
+START TRANSACTION;
+SELECT * FROM t1 WHERE b=3 LIMIT 1 FOR UPDATE;
+a	b
+3	3
+START TRANSACTION;
+UPDATE t1 SET b=10 WHERE a > 1 ORDER BY a;
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+SELECT * FROM t1 WHERE b = 10;
+a	b
+DROP TABLE t1;

mysql-test/suite/innodb_plugin/r/innodb_notembedded.result

+drop table if exists t1;
+SET @old_log_bin_trust_function_creators= @@global.log_bin_trust_function_creators;
+SET GLOBAL log_bin_trust_function_creators = 1;
+create table t1 (col1 integer primary key, col2 integer) engine=innodb;
+insert t1 values (1,100);
+create function f1 () returns integer begin
+declare var1 int;
+select col2 into var1 from t1 where col1=1 for update;
+return var1;
+end|
+start transaction;
+select f1();
+f1()
+100
+update t1 set col2=0 where col1=1;
+select * from t1;
+col1	col2
+1	100
+rollback;
+rollback;
+drop table t1;
+drop function f1;
+SET @@global.log_bin_trust_function_creators= @old_log_bin_trust_function_creators;

mysql-test/suite/innodb_plugin/r/innodb_timeout_rollback.result

+drop table if exists t1;
+show variables like 'innodb_rollback_on_timeout';
+Variable_name	Value
+innodb_rollback_on_timeout	ON
+create table t1 (a int unsigned not null primary key) engine = innodb;
+insert into t1 values (1);
+commit;
+begin work;
+insert into t1 values (2);
+select * from t1;
+a
+1
+2
+begin work;
+insert into t1 values (5);
+select * from t1;
+a
+1
+5
+insert into t1 values (2);
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+select * from t1;
+a
+1
+commit;
+select * from t1;
+a
+1
+2
+commit;
+select * from t1;
+a
+1
+2
+drop table t1;
+End of 5.0 tests

mysql-test/suite/innodb_plugin/t/innodb-autoinc-optimize.test

+-- source include/have_innodb_plugin.inc
+# embedded server ignores 'delayed', so skip this
+-- source include/not_embedded.inc
+
+--disable_warnings
+drop table if exists t1;
+--enable_warnings
+
+#
+# Bug 34286
+#
+create table t1(a int not null auto_increment primary key) engine=innodb;
+insert into t1 set a = -1;
+# NOTE: The database needs to be shutdown and restarted (here) for
+# the test to work. It's included for reference only.
+optimize table t1;
+
+--echo ==== clean up ====
+DROP TABLE t1;

mysql-test/suite/innodb_plugin/t/innodb_autoinc_lock_mode_zero-master.opt

+--innodb-autoinc-lock-mode=0

mysql-test/suite/innodb_plugin/t/innodb_autoinc_lock_mode_zero.test

+# This test runs with old-style locking, as:
+# --innodb-autoinc-lock-mode=0
+
+-- source include/have_innodb_plugin.inc
+
+--disable_warnings
+drop table if exists t1;
+--enable_warnings
+
+
+#
+# Search on unique key
+#
+
+CREATE TABLE t1 (
+  id int(11) NOT NULL auto_increment,
+  ggid varchar(32) binary DEFAULT '' NOT NULL,
+  email varchar(64) DEFAULT '' NOT NULL,
+  passwd varchar(32) binary DEFAULT '' NOT NULL,
+  PRIMARY KEY (id),
+  UNIQUE ggid (ggid)
+) ENGINE=innodb;
+
+insert into t1 (ggid,passwd) values ('test1','xxx');
+insert into t1 (ggid,passwd) values ('test2','yyy');
+-- error ER_DUP_ENTRY
+insert into t1 (ggid,passwd) values ('test2','this will fail');
+-- error ER_DUP_ENTRY
+insert into t1 (ggid,id) values ('this will fail',1);
+
+select * from t1 where ggid='test1';
+select * from t1 where passwd='xxx';
+select * from t1 where id=2;
+
+replace into t1 (ggid,id) values ('this will work',1);
+replace into t1 (ggid,passwd) values ('test2','this will work');
+-- error ER_DUP_ENTRY
+update t1 set id=100,ggid='test2' where id=1;
+select * from t1;
+select * from t1 where id=1;
+select * from t1 where id=999;
+drop table t1;
+
+--echo End of tests

mysql-test/suite/innodb_plugin/t/innodb_bug30919-master.opt

+--innodb --innodb_autoinc_lock_mode=0

mysql-test/suite/innodb_plugin/t/innodb_bug30919.test

+--source include/have_innodb_plugin.inc
+--source include/have_partition.inc
+--vertical_results
+let $engine_type= 'innodb';
+
+######## Creat Table Section #########
+use test;
+
+eval CREATE TABLE test.part_tbl(id MEDIUMINT NOT NULL AUTO_INCREMENT,
+                           dt TIMESTAMP, user CHAR(255), uuidf LONGBLOB,
+                           fkid MEDIUMINT, filler VARCHAR(255),
+                           PRIMARY KEY(id)) ENGINE=$engine_type
+                                PARTITION BY RANGE(id)
+                                SUBPARTITION BY hash(id) subpartitions 2
+                                (PARTITION pa3 values less than (42),
+                                 PARTITION pa6 values less than (60),
+                                 PARTITION pa7 values less than (70),
+                                 PARTITION pa8 values less than (80),
+                                 PARTITION pa9 values less than (90),
+                                 PARTITION pa10 values less than (100),
+                                 PARTITION pa11 values less than MAXVALUE);
+
+######## Create SPs, Functions, Views and Triggers Section ##############
+
+delimiter |;
+
+CREATE PROCEDURE test.proc_part()
+BEGIN
+   DECLARE ins_count INT DEFAULT 1000;
+   DECLARE del_count INT;
+   DECLARE cur_user VARCHAR(255);
+   DECLARE local_uuid VARCHAR(255);
+   DECLARE local_time TIMESTAMP;
+
+   SET local_time= NOW();
+   SET cur_user= CURRENT_USER();
+   SET local_uuid= UUID();
+
+   WHILE ins_count > 0 DO
+     INSERT INTO test.part_tbl VALUES (NULL, NOW(), USER() , UUID(),
+                                   ins_count,'Going to test MBR for MySQL');
+     SET ins_count = ins_count - 1;
+   END WHILE;
+   SELECT MAX(id) FROM test.part_tbl INTO del_count;
+   WHILE del_count > 0 DO
+     DELETE FROM test.part_tbl WHERE id = del_count;
+     select count(*) as internal_count, del_count  -- these two lines are for
+     FROM test.part_tbl;                           -- debug to show the problem
+     SET del_count = del_count - 2;
+   END WHILE;
+END|
+
+delimiter ;|
+
+############ Finish Setup Section ###################
+
+############ Test Section ###################
+--horizontal_results
+
+CALL test.proc_part();
+
+select count(*) as Part from test.part_tbl;
+
+###### CLEAN UP SECTION ##############
+
+DROP PROCEDURE test.proc_part;
+DROP TABLE test.part_tbl;
+

mysql-test/suite/innodb_plugin/t/innodb_gis.test

+--source include/have_innodb_plugin.inc
+SET storage_engine=innodb;
+--source include/gis_generic.inc
+--source include/gis_keys.inc
+
+#
+# Bug #15680 (SPATIAL key in innodb)
+#
+--error ER_TABLE_CANT_HANDLE_SPKEYS
+create table t1 (g geometry not null, spatial gk(g)) engine=innodb;

mysql-test/suite/innodb_plugin/t/innodb_lock_wait_timeout_1-master.opt

+--innodb_lock_wait_timeout=1

mysql-test/suite/innodb_plugin/t/innodb_mysql-master.opt

+--innodb-lock-wait-timeout=2

mysql-test/suite/innodb_plugin/t/innodb_mysql_rbk-master.opt

+--innodb_lock_wait_timeout=1 --innodb_rollback_on_timeout=1

mysql-test/suite/innodb_plugin/t/innodb_timeout_rollback-master.opt

+--innodb_lock_wait_timeout=2 --innodb_rollback_on_timeout

mysql-test/suite/innodb_plugin/t/innodb_timeout_rollback.test

+-- source include/have_innodb_plugin.inc
+
+--source include/innodb_rollback_on_timeout.inc
+
+--echo End of 5.0 tests