Skip to content

M
mariadb
Commit 7bb022f3 authored by unknown's avatar unknown
Browse files
Options

MDEV-4726: Race in mysql-test/suite/rpl/t/rpl_gtid_stop_start.test 

Some GTID test cases were using include/wait_condition.inc with a
condition like SELECT COUNT(*)=4 FROM t1 to wait for the slave to
catch up with the master. This causes races and test failures, as the
changes to the tables become visible at the COMMIT of the SQL thread
(or even before in case of MyISAM), but the changes to
@@gtid_slave_pos only become visible a little bit after the COMMIT.

Now that we have MASTER_GTID_WAIT(), just use that to sync up in a
GTID-friendly way, wrapped in nice include/save_master_gtid.inc and
include/sync_with_master_gtid.inc scripts.
parent 4e6606ac
Hide whitespace changes
Inline Side-by-side
Showing with 118 additions and 48 deletions
mysql-test/include/save_master_gtid.inc 0 → 100644
View file @ 7bb022f3
# ==== Purpose ====
#
# Save the current binlog GTID position on the master, to be used
# with include/sync_with_master_gtid.inc.
#
#
# ==== Usage ====
#
# [--let $rpl_debug= 1]
# --source include/save_master_gtid.inc
#
# Parameters:
# $rpl_debug
# See include/rpl_init.inc
--let $include_filename= save_master_gtid.inc
--source include/begin_include_file.inc
--let $master_pos= `SELECT @@gtid_binlog_pos`
if ($rpl_debug)
{
--echo save_master_gtid saved master_pos='$master_pos'
}
--let $include_filename= save_master_gtid.inc
--source include/end_include_file.inc
mysql-test/suite/rpl/r/rpl_gtid_basic.result
View file @ 7bb022f3
......@@ -103,9 +103,11 @@ BEGIN;
INSERT INTO t2 VALUES (6, "i6b");
INSERT INTO t2 VALUES (7, "i7b");
COMMIT;
include/save_master_gtid.inc
CHANGE MASTER TO master_host = '127.0.0.1', master_port = SERVER_MYPORT_4,
MASTER_USE_GTID=CURRENT_POS;
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t2 ORDER BY a;
a b
1 i1
......@@ -116,6 +118,7 @@ a b
6 i6b
7 i7b
*** Now change everything back to what it was, to make rpl_end.inc happy
include/sync_with_master_gtid.inc
include/stop_slave.inc
CHANGE MASTER TO master_host = '127.0.0.1', master_port = MASTER_MYPORT;
include/start_slave.inc
......@@ -123,6 +126,7 @@ include/wait_for_slave_to_start.inc
include/stop_slave.inc
CHANGE MASTER TO master_host = '127.0.0.1', master_port = SLAVE_MYPORT;
include/start_slave.inc
include/sync_with_master_gtid.inc
include/stop_slave.inc
CHANGE MASTER TO master_host = '127.0.0.1', master_port = SERVER_MYPORT_3;
include/start_slave.inc
......@@ -196,6 +200,7 @@ SET GLOBAL gtid_binlog_state = @old_state;
CREATE TABLE t1 (a INT PRIMARY KEY);
SET gtid_seq_no=100;
INSERT INTO t1 VALUES (1);
include/save_master_gtid.inc
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t1;
......
mysql-test/suite/rpl/r/rpl_gtid_crash.result
View file @ 7bb022f3
......@@ -12,10 +12,14 @@ MASTER_USE_GTID=CURRENT_POS;
INSERT INTO t1 VALUES (2,1);
INSERT INTO t1 VALUES (3,1);
include/start_slave.inc
include/save_master_gtid.inc
SET SESSION debug_dbug="+d,crash_dispatch_command_before";
SELECT 1;
Got one of the listed errors
include/sync_with_master_gtid.inc
INSERT INTO t1 VALUES (1000, 3);
include/save_master_gtid.inc
include/sync_with_master_gtid.inc
DROP TABLE t1;
*** Test crashing the master mysqld and check that binlog state is recovered. ***
include/stop_slave.inc
......@@ -64,22 +68,32 @@ include/stop_slave.inc
SET GLOBAL debug_dbug="+d,inject_crash_before_write_rpl_slave_state";
START SLAVE;
INSERT INTO t1 VALUES (4);
include/save_master_gtid.inc
include/sync_with_master_gtid.inc
include/stop_slave.inc
SET GLOBAL debug_dbug="+d,crash_commit_before";
START SLAVE;
INSERT INTO t1 VALUES (5);
include/save_master_gtid.inc
include/sync_with_master_gtid.inc
include/stop_slave.inc
SET GLOBAL debug_dbug="+d,crash_commit_after";
START SLAVE;
INSERT INTO t1 VALUES (6);
include/save_master_gtid.inc
include/sync_with_master_gtid.inc
include/stop_slave.inc
SET GLOBAL debug_dbug="+d,inject_crash_before_flush_rli";
START SLAVE;
INSERT INTO t1 VALUES (7);
include/save_master_gtid.inc
include/sync_with_master_gtid.inc
include/stop_slave.inc
SET GLOBAL debug_dbug="+d,inject_crash_after_flush_rli";
START SLAVE;
INSERT INTO t1 VALUES (8);
include/save_master_gtid.inc
include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
a
1
......
mysql-test/suite/rpl/r/rpl_gtid_errorhandling.result
View file @ 7bb022f3
......@@ -57,6 +57,7 @@ include/stop_slave.inc
RESET MASTER;
INSERT INTO t1 VALUES (2);
INSERT INTO t1 VALUES (4);
include/save_master_gtid.inc
SET sql_log_bin = 0;
INSERT INTO t1 VALUES (2);
SET sql_log_bin = 1;
......@@ -84,6 +85,7 @@ Warning 1948 Specified value for @@gtid_slave_pos contains no value for replicat
RESET MASTER;
SET GLOBAL gtid_slave_pos = "0-1-1";
START SLAVE;
include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
a
1
......@@ -93,6 +95,7 @@ a
*** MDEV-4688: Empty value of @@GLOBAL.gtid_slave_pos ***
include/stop_slave.inc
INSERT INTO t1 VALUES (5);
include/save_master_gtid.inc
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,dummy_disable_default_dbug_output";
SET GLOBAL debug_dbug="+d,gtid_fail_after_record_gtid";
......@@ -112,6 +115,7 @@ a
4
SET GLOBAL debug_dbug= @old_dbug;
START SLAVE SQL_THREAD;
include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
a
1
......@@ -136,6 +140,8 @@ SET GLOBAL gtid_slave_pos = "0-1-3";
START SLAVE;
include/wait_for_slave_to_start.inc
INSERT INTO t1 VALUES (6);
include/save_master_gtid.inc
include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
a
1
......
mysql-test/suite/rpl/r/rpl_gtid_nobinlog.result
View file @ 7bb022f3
......@@ -23,6 +23,7 @@ START SLAVE;
include/wait_for_slave_to_start.inc
INSERT INTO t1 VALUES (3, 2);
INSERT INTO t1 VALUES (4, 2);
include/save_master_gtid.inc
show binlog events from <binlog_start>;
Log_name Pos Event_type Server_id End_log_pos Info
slave-bin.000001 # Gtid # # BEGIN GTID #-#-#
......@@ -31,6 +32,7 @@ slave-bin.000001 # Query # # COMMIT
slave-bin.000001 # Gtid # # BEGIN GTID #-#-#
slave-bin.000001 # Query # # use `test`; INSERT INTO t1 VALUES (4, 2)
slave-bin.000001 # Query # # COMMIT
include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
a b
1 1
......@@ -41,9 +43,11 @@ include/stop_slave.inc
RESET SLAVE;
INSERT INTO t1 VALUES (5, 1);
INSERT INTO t1 VALUES (6, 1);
include/save_master_gtid.inc
CHANGE MASTER TO master_host = '127.0.0.1', master_port = MASTER_PORT,
master_use_gtid = current_pos;
START SLAVE;
include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
a b
1 1
......
mysql-test/suite/rpl/r/rpl_gtid_startpos.result
View file @ 7bb022f3
......@@ -43,10 +43,12 @@ SET sql_log_bin=1;
*** Test that we give warning when explict @@gtid_slave_pos=xxx that conflicts with what is in our binary log ***
include/stop_slave.inc
INSERT INTO t1 VALUES(3);
include/save_master_gtid.inc
SET GLOBAL gtid_slave_pos='0-1-3';
CHANGE MASTER TO master_host = '127.0.0.1', master_port = MASTER_PORT,
MASTER_USE_GTID=CURRENT_POS;
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER by a;
a
1
......@@ -54,6 +56,7 @@ a
3
include/stop_slave.inc
INSERT INTO t1 VALUES (4);
include/save_master_gtid.inc
INSERT INTO t1 VALUES (10);
DELETE FROM t1 WHERE a=10;
SET GLOBAL gtid_slave_pos='0-1-4';
......@@ -62,6 +65,7 @@ Warning 1947 Specified GTID 0-1-4 conflicts with the binary log which contains a
RESET MASTER;
SET GLOBAL gtid_slave_pos='0-1-4';
START SLAVE;
include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER by a;
a
1
......@@ -125,6 +129,8 @@ STOP SLAVE IO_THREAD;
CHANGE MASTER TO MASTER_USE_GTID=CURRENT_POS;
include/start_slave.inc
INSERT INTO t1 VALUES(3);
include/save_master_gtid.inc
include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
a
1
......@@ -136,6 +142,8 @@ SET SQL_LOG_BIN=1;
*** Test reconnecting slave with GTID after purge logs on master. ***
FLUSH LOGS;
INSERT INTO t1 VALUES (4);
include/save_master_gtid.inc
include/sync_with_master_gtid.inc
include/stop_slave.inc
FLUSH LOGS;
FLUSH LOGS;
......@@ -144,8 +152,10 @@ show binary logs;
Log_name File_size
master-bin.000004 #
INSERT INTO t1 VALUES (5);
include/save_master_gtid.inc
CHANGE MASTER TO master_host = '127.0.0.1', master_port = MASTER_PORT;
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
a
1
......@@ -160,7 +170,9 @@ SET GLOBAL gtid_slave_pos="";
RESET MASTER;
TRUNCATE TABLE t1;
INSERT INTO t1 VALUES (10);
include/save_master_gtid.inc
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t1;
a
10
......
mysql-test/suite/rpl/r/rpl_gtid_stop_start.result
View file @ 7bb022f3
......@@ -14,10 +14,12 @@ master-bin.000002 #
INSERT INTO t1 VALUES (2);
FLUSH LOGS;
INSERT INTO t1 VALUES (3);
include/save_master_gtid.inc
show binary logs;
Log_name File_size
master-bin.000002 #
master-bin.000003 #
include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
a
1
......@@ -43,6 +45,8 @@ master-bin.000003 #
master-bin.000004 #
master-bin.000005 #
INSERT INTO t1 VALUES(5);
include/save_master_gtid.inc
include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
a
1
......
mysql-test/suite/rpl/t/rpl_gtid_basic.test
View file @ 7bb022f3
......@@ -101,15 +101,14 @@ BEGIN;
INSERT INTO t2 VALUES (6, "i6b");
INSERT INTO t2 VALUES (7, "i7b");
COMMIT;
--source include/save_master_gtid.inc
connection server_3;
--replace_result $SERVER_MYPORT_4 SERVER_MYPORT_4
eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $SERVER_MYPORT_4,
MASTER_USE_GTID=CURRENT_POS;
--source include/start_slave.inc
# This time, let's sync up without reference to binlog on D.
--let $wait_condition= SELECT COUNT(*) = 7 FROM t2
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t2 ORDER BY a;
--echo *** Now change everything back to what it was, to make rpl_end.inc happy
......@@ -118,8 +117,7 @@ connection server_2;
# We need to sync up server_2 before switching. If it happened to have reached
# the point 'UPDATE t2 SET b="j1a" WHERE a=5' it will fail to connect to
# server_1, which is (deliberately) missing that transaction.
--let $wait_condition= SELECT COUNT(*) = 7 FROM t2
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
--source include/stop_slave.inc
--replace_result $MASTER_MYPORT MASTER_MYPORT
eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $MASTER_MYPORT;
......@@ -131,8 +129,7 @@ connection server_3;
--replace_result $SLAVE_MYPORT SLAVE_MYPORT
eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $SLAVE_MYPORT;
--source include/start_slave.inc
--let $wait_condition= SELECT COUNT(*) = 7 FROM t2
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
connection server_4;
--source include/stop_slave.inc
......@@ -192,7 +189,7 @@ SET GLOBAL gtid_binlog_state = @old_state;
CREATE TABLE t1 (a INT PRIMARY KEY);
SET gtid_seq_no=100;
INSERT INTO t1 VALUES (1);
--let $master_pos= `SELECT @@GLOBAL.gtid_binlog_pos`
--source include/save_master_gtid.inc
--connection server_2
--source include/start_slave.inc
......
mysql-test/suite/rpl/t/rpl_gtid_crash.test
View file @ 7bb022f3
......@@ -46,6 +46,7 @@ while ($1)
dec $1;
}
--enable_query_log
--source include/save_master_gtid.inc
SET SESSION debug_dbug="+d,crash_dispatch_command_before";
--error 2006,2013
......@@ -60,15 +61,14 @@ EOF
--source include/wait_until_connected_again.inc
--connection server_2
--let $wait_condition= SELECT COUNT(*) = 200 FROM t1 WHERE b=2
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
--connection server_1
INSERT INTO t1 VALUES (1000, 3);
--source include/save_master_gtid.inc
--connection server_2
--let $wait_condition= SELECT COUNT(*) = 1 FROM t1 WHERE b=3
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
--connection server_1
DROP TABLE t1;
......@@ -141,6 +141,7 @@ START SLAVE;
--connection server_1
INSERT INTO t1 VALUES (4);
--source include/save_master_gtid.inc
--connection server_2
--source include/wait_until_disconnected.inc
......@@ -152,8 +153,7 @@ EOF
--enable_reconnect
--source include/wait_until_connected_again.inc
--let $wait_condition= SELECT COUNT(*) = 4 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
# Crash the slave just before committing.
--source include/stop_slave.inc
......@@ -165,6 +165,7 @@ START SLAVE;
--connection server_1
INSERT INTO t1 VALUES (5);
--source include/save_master_gtid.inc
--connection server_2
--source include/wait_until_disconnected.inc
......@@ -176,8 +177,7 @@ EOF
--enable_reconnect
--source include/wait_until_connected_again.inc
--let $wait_condition= SELECT COUNT(*) = 5 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
# Crash the slave just after committing.
--source include/stop_slave.inc
......@@ -189,6 +189,7 @@ START SLAVE;
--connection server_1
INSERT INTO t1 VALUES (6);
--source include/save_master_gtid.inc
--connection server_2
--source include/wait_until_disconnected.inc
......@@ -200,8 +201,7 @@ EOF
--enable_reconnect
--source include/wait_until_connected_again.inc
--let $wait_condition= SELECT COUNT(*) = 6 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
# Crash the slave just before updating relay-log.info
--source include/stop_slave.inc
......@@ -213,6 +213,7 @@ START SLAVE;
--connection server_1
INSERT INTO t1 VALUES (7);
--source include/save_master_gtid.inc
--connection server_2
--source include/wait_until_disconnected.inc
......@@ -224,8 +225,7 @@ EOF
--enable_reconnect
--source include/wait_until_connected_again.inc
--let $wait_condition= SELECT COUNT(*) = 7 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
# Crash the slave just after updating relay-log.info
--source include/stop_slave.inc
......@@ -237,6 +237,7 @@ START SLAVE;
--connection server_1
INSERT INTO t1 VALUES (8);
--source include/save_master_gtid.inc
--connection server_2
--source include/wait_until_disconnected.inc
......@@ -248,8 +249,7 @@ EOF
--enable_reconnect
--source include/wait_until_connected_again.inc
--let $wait_condition= SELECT COUNT(*) = 8 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
# Check that everything was replicated correctly.
......
mysql-test/suite/rpl/t/rpl_gtid_errorhandling.test
View file @ 7bb022f3
......@@ -79,6 +79,7 @@ RESET MASTER;
INSERT INTO t1 VALUES (2);
# And this will be GTID 0-1-2
INSERT INTO t1 VALUES (4);
--source include/save_master_gtid.inc
--connection slave
SET sql_log_bin = 0;
......@@ -110,8 +111,7 @@ RESET MASTER;
SET GLOBAL gtid_slave_pos = "0-1-1";
START SLAVE;
--let $wait_condition= SELECT COUNT(*) = 4 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
--echo *** MDEV-4688: Empty value of @@GLOBAL.gtid_slave_pos ***
......@@ -125,6 +125,7 @@ SELECT * FROM t1 ORDER BY a;
--connection master
# This will be GTID 0-1-3
INSERT INTO t1 VALUES (5);
--source include/save_master_gtid.inc
--connection slave
SET @old_dbug= @@GLOBAL.debug_dbug;
......@@ -141,8 +142,7 @@ SELECT @@GLOBAL.gtid_slave_pos;
SELECT * FROM t1 ORDER BY a;
SET GLOBAL debug_dbug= @old_dbug;
START SLAVE SQL_THREAD;
--let $wait_condition= SELECT COUNT(*) = 5 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
......@@ -167,10 +167,10 @@ START SLAVE;
--connection master
INSERT INTO t1 VALUES (6);
--source include/save_master_gtid.inc
--connection slave
--let $wait_condition= SELECT COUNT(*) = 6 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
......
mysql-test/suite/rpl/t/rpl_gtid_nobinlog.test
View file @ 7bb022f3
......@@ -32,12 +32,12 @@ START SLAVE;
--connection server_2
INSERT INTO t1 VALUES (3, 2);
INSERT INTO t1 VALUES (4, 2);
--source include/save_master_gtid.inc
--source include/show_binlog_events.inc
--connection server_1
--let $wait_condition= SELECT COUNT(*) = 4 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
......@@ -45,14 +45,14 @@ SELECT * FROM t1 ORDER BY a;
RESET SLAVE;
INSERT INTO t1 VALUES (5, 1);
INSERT INTO t1 VALUES (6, 1);
--source include/save_master_gtid.inc
--connection server_2
--replace_result $MASTER_MYPORT MASTER_PORT
eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $MASTER_MYPORT,
master_use_gtid = current_pos;
START SLAVE;
--let $wait_condition= SELECT COUNT(*) = 6 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
......
mysql-test/suite/rpl/t/rpl_gtid_startpos.test
View file @ 7bb022f3
......@@ -67,6 +67,7 @@ SET sql_log_bin=1;
--connection server_1
INSERT INTO t1 VALUES(3);
--source include/save_master_gtid.inc
--connection server_2
SET GLOBAL gtid_slave_pos='0-1-3';
......@@ -74,13 +75,13 @@ SET GLOBAL gtid_slave_pos='0-1-3';
eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $MASTER_MYPORT,
MASTER_USE_GTID=CURRENT_POS;
--source include/start_slave.inc
--let $wait_condition= SELECT COUNT(*) = 3 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER by a;
--source include/stop_slave.inc
--connection server_1
INSERT INTO t1 VALUES (4);
--source include/save_master_gtid.inc
--connection server_2
# Now add some local transactions that conflict with the GTID position
......@@ -93,8 +94,7 @@ SET GLOBAL gtid_slave_pos='0-1-4';
RESET MASTER;
SET GLOBAL gtid_slave_pos='0-1-4';
START SLAVE;
--let $wait_condition= SELECT COUNT(*) = 4 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER by a;
--connection server_1
......@@ -200,10 +200,10 @@ CHANGE MASTER TO MASTER_USE_GTID=CURRENT_POS;
--connection server_1
INSERT INTO t1 VALUES(3);
--source include/save_master_gtid.inc
--connection server_2
--let $wait_condition= SELECT COUNT(*) = 3 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
SET SQL_LOG_BIN=0;
call mtr.add_suppression("Slave: Table 't1' already exists error.* 1050");
......@@ -215,10 +215,10 @@ SET SQL_LOG_BIN=1;
--connection server_1
FLUSH LOGS;
INSERT INTO t1 VALUES (4);
--source include/save_master_gtid.inc
--connection server_2
--let $wait_condition= SELECT COUNT(*) = 4 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
--source include/stop_slave.inc
--connection server_1
......@@ -228,13 +228,13 @@ FLUSH LOGS;
--source include/wait_for_purge.inc
--source include/show_binary_logs.inc
INSERT INTO t1 VALUES (5);
--source include/save_master_gtid.inc
--connection server_2
--replace_result $MASTER_MYPORT MASTER_PORT
eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $MASTER_MYPORT;
--source include/start_slave.inc
--let $wait_condition= SELECT COUNT(*) = 5 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
......@@ -249,11 +249,11 @@ SET GLOBAL gtid_slave_pos="";
RESET MASTER;
TRUNCATE TABLE t1;
INSERT INTO t1 VALUES (10); # Will be GTID 0-1-2
--source include/save_master_gtid.inc
--connection server_2
--source include/start_slave.inc
--let $wait_condition= SELECT COUNT(*) = 1 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t1;
--let $value= query_get_value(SHOW SLAVE STATUS, "Using_Gtid", 1)
......
mysql-test/suite/rpl/t/rpl_gtid_stop_start.test
View file @ 7bb022f3
......@@ -39,6 +39,7 @@ FLUSH LOGS;
INSERT INTO t1 VALUES (2);
FLUSH LOGS;
INSERT INTO t1 VALUES (3);
--source include/save_master_gtid.inc
--source include/show_binary_logs.inc
# Let the slave mysqld server start again.
......@@ -50,8 +51,7 @@ EOF
--enable_reconnect
--source include/wait_until_connected_again.inc
--let $wait_condition= SELECT COUNT(*) = 3 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
......@@ -88,10 +88,10 @@ SHOW BINLOG EVENTS IN 'master-bin.000005' LIMIT 1,1;
--source include/show_binary_logs.inc
INSERT INTO t1 VALUES(5);
--source include/save_master_gtid.inc
--connection server_2
--let $wait_condition= SELECT COUNT(*) = 5 FROM t1
--source include/wait_condition.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t1 ORDER BY a;
--echo *** Test that @@gtid_slave_pos and @@gtid_current_pos are correctly loaded even if slave threads have not started. ***
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7