Adding the new zlib tree for Windows

BitKeeper/etc/logging_ok:
  Logging to logging@openlogging.org accepted

BitKeeper/etc/logging_ok

@@ -13,3 +13,4 @@ sasha@mysql.sashanet.com
 serg@serg.mysql.com
 heikki@hundin.mysql.fi
 jani@hynda.mysql.fi
+miguel@hegel.local

zlib/Make_vms.com

+$! make libz under VMS
+$! written by Martin P.J. Zinser <m.zinser@gsi.de>
+$!
+$! Look for the compiler used
+$!
+$ ccopt = ""
+$ if f$getsyi("HW_MODEL").ge.1024
+$ then
+$  ccopt = "/prefix=all"+ccopt
+$  comp  = "__decc__=1"
+$  if f$trnlnm("SYS").eqs."" then define sys sys$library:
+$ else
+$  if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs.""
+$   then
+$    comp  = "__vaxc__=1"
+$    if f$trnlnm("SYS").eqs."" then define sys sys$library:
+$   else
+$    if f$trnlnm("SYS").eqs."" then define sys decc$library_include:
+$    ccopt = "/decc/prefix=all"+ccopt
+$    comp  = "__decc__=1"
+$  endif
+$ endif
+$!
+$! Build the thing plain or with mms
+$!
+$ write sys$output "Compiling Zlib sources ..."
+$ if f$search("SYS$SYSTEM:MMS.EXE").eqs.""
+$  then
+$   dele example.obj;*,minigzip.obj;*
+$   CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
+                adler32.c zlib.h zconf.h
+$   CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
+                compress.c zlib.h zconf.h
+$   CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
+                crc32.c zlib.h zconf.h
+$   CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
+                deflate.c deflate.h zutil.h zlib.h zconf.h
+$   CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
+                gzio.c zutil.h zlib.h zconf.h
+$   CALL MAKE infblock.OBJ "CC ''CCOPT' infblock" -
+                infblock.c zutil.h zlib.h zconf.h infblock.h
+$   CALL MAKE infcodes.OBJ "CC ''CCOPT' infcodes" -
+                infcodes.c zutil.h zlib.h zconf.h inftrees.h
+$   CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
+                inffast.c zutil.h zlib.h zconf.h inffast.h
+$   CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
+                inflate.c zutil.h zlib.h zconf.h infblock.h
+$   CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
+                inftrees.c zutil.h zlib.h zconf.h inftrees.h
+$   CALL MAKE infutil.OBJ "CC ''CCOPT' infutil" -
+                infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+$   CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
+                trees.c deflate.h zutil.h zlib.h zconf.h
+$   CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
+                uncompr.c zlib.h zconf.h
+$   CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
+                zutil.c zutil.h zlib.h zconf.h
+$   write sys$output "Building Zlib ..."
+$   CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
+$   write sys$output "Building example..."
+$   CALL MAKE example.OBJ "CC ''CCOPT' example" -
+                example.c zlib.h zconf.h
+$   call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
+$   write sys$output "Building minigzip..."
+$   CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
+                minigzip.c zlib.h zconf.h
+$   call make minigzip.exe - 
+                "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" - 
+                minigzip.obj libz.olb
+$  else
+$   mms/macro=('comp')
+$  endif
+$ write sys$output "Zlib build completed"
+$ exit
+$!
+$!
+$MAKE: SUBROUTINE   !SUBROUTINE TO CHECK DEPENDENCIES
+$ V = 'F$Verify(0)
+$! P1 = What we are trying to make
+$! P2 = Command to make it
+$! P3 - P8  What it depends on
+$
+$ If F$Search(P1) .Eqs. "" Then Goto Makeit
+$ Time = F$CvTime(F$File(P1,"RDT"))
+$arg=3
+$Loop:
+$       Argument = P'arg
+$       If Argument .Eqs. "" Then Goto Exit
+$       El=0
+$Loop2:
+$       File = F$Element(El," ",Argument)
+$       If File .Eqs. " " Then Goto Endl
+$       AFile = ""
+$Loop3:
+$       OFile = AFile
+$       AFile = F$Search(File)
+$       If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl
+$       If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit
+$       Goto Loop3
+$NextEL:
+$       El = El + 1
+$       Goto Loop2
+$EndL:
+$ arg=arg+1
+$ If arg .Le. 8 Then Goto Loop
+$ Goto Exit
+$
+$Makeit:
+$ VV=F$VERIFY(0)
+$ write sys$output P2
+$ 'P2
+$ VV='F$Verify(VV)
+$Exit:
+$ If V Then Set Verify
+$ENDSUBROUTINE

zlib/Makefile.riscos

+# Project:   zlib_1_03
+# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430
+# test works out-of-the-box, installs `somewhere' on demand
+
+# Toolflags:
+CCflags = -c -depend !Depend -IC: -g -throwback  -DRISCOS  -fah 
+C++flags = -c -depend !Depend -IC: -throwback
+Linkflags = -aif -c++ -o $@ 
+ObjAsmflags = -throwback -NoCache -depend !Depend
+CMHGflags = 
+LibFileflags = -c -l -o $@ 
+Squeezeflags = -o $@
+
+# change the line below to where _you_ want the library installed.
+libdest = lib:zlib
+
+# Final targets:
+@.lib:   @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
+        @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \
+        @.o.uncompr @.o.zutil 
+        LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \
+        @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \
+        @.o.trees @.o.uncompr @.o.zutil 
+test:   @.minigzip @.example @.lib
+	@copy @.lib @.libc  A~C~DF~L~N~P~Q~RS~TV
+	@echo running tests: hang on.
+	@/@.minigzip -f -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -f -1 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -h -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -h -1 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -1 libc
+	@/@.minigzip -d libc-gz
+	@diff @.lib @.libc
+	@echo that should have reported '@.lib and @.libc identical' if you have diff.
+	@/@.example @.fred @.fred
+	@echo that will have given lots of hello!'s.
+
+@.minigzip:   @.o.minigzip @.lib C:o.Stubs 
+        Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs 
+@.example:   @.o.example @.lib C:o.Stubs 
+        Link $(Linkflags) @.o.example @.lib C:o.Stubs
+
+install: @.lib
+	cdir $(libdest)
+	cdir $(libdest).h
+	@copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV
+	@copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV
+	@copy @.lib $(libdest).lib  A~C~DF~L~N~P~Q~RS~TV
+	@echo okay, installed zlib in $(libdest)
+
+clean:; remove @.minigzip
+	remove @.example
+	remove @.libc
+	-wipe @.o.* F~r~cV
+	remove @.fred
+
+# User-editable dependencies:
+.c.o:
+        cc $(ccflags) -o $@ $<
+
+# Static dependencies:
+
+# Dynamic dependencies:
+o.example:	c.example
+o.example:	h.zlib
+o.example:	h.zconf
+o.minigzip:	c.minigzip
+o.minigzip:	h.zlib
+o.minigzip:	h.zconf
+o.adler32:	c.adler32
+o.adler32:	h.zlib
+o.adler32:	h.zconf
+o.compress:	c.compress
+o.compress:	h.zlib
+o.compress:	h.zconf
+o.crc32:	c.crc32
+o.crc32:	h.zlib
+o.crc32:	h.zconf
+o.deflate:	c.deflate
+o.deflate:	h.deflate
+o.deflate:	h.zutil
+o.deflate:	h.zlib
+o.deflate:	h.zconf
+o.gzio:	c.gzio
+o.gzio:	h.zutil
+o.gzio:	h.zlib
+o.gzio:	h.zconf
+o.infblock:	c.infblock
+o.infblock:	h.zutil
+o.infblock:	h.zlib
+o.infblock:	h.zconf
+o.infblock:	h.infblock
+o.infblock:	h.inftrees
+o.infblock:	h.infcodes
+o.infblock:	h.infutil
+o.infcodes:	c.infcodes
+o.infcodes:	h.zutil
+o.infcodes:	h.zlib
+o.infcodes:	h.zconf
+o.infcodes:	h.inftrees
+o.infcodes:	h.infblock
+o.infcodes:	h.infcodes
+o.infcodes:	h.infutil
+o.infcodes:	h.inffast
+o.inffast:	c.inffast
+o.inffast:	h.zutil
+o.inffast:	h.zlib
+o.inffast:	h.zconf
+o.inffast:	h.inftrees
+o.inffast:	h.infblock
+o.inffast:	h.infcodes
+o.inffast:	h.infutil
+o.inffast:	h.inffast
+o.inflate:	c.inflate
+o.inflate:	h.zutil
+o.inflate:	h.zlib
+o.inflate:	h.zconf
+o.inflate:	h.infblock
+o.inftrees:	c.inftrees
+o.inftrees:	h.zutil
+o.inftrees:	h.zlib
+o.inftrees:	h.zconf
+o.inftrees:	h.inftrees
+o.inftrees:	h.inffixed
+o.infutil:	c.infutil
+o.infutil:	h.zutil
+o.infutil:	h.zlib
+o.infutil:	h.zconf
+o.infutil:	h.infblock
+o.infutil:	h.inftrees
+o.infutil:	h.infcodes
+o.infutil:	h.infutil
+o.trees:	c.trees
+o.trees:	h.deflate
+o.trees:	h.zutil
+o.trees:	h.zlib
+o.trees:	h.zconf
+o.trees:	h.trees
+o.uncompr:	c.uncompr
+o.uncompr:	h.zlib
+o.uncompr:	h.zconf
+o.zutil:	c.zutil
+o.zutil:	h.zutil
+o.zutil:	h.zlib
+o.zutil:	h.zconf

zlib/adler32.c

+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* @(#) $Id$ */
+
+#include "zlib.h"
+
+#define BASE 65521L /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
+#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf)   DO8(buf,0); DO8(buf,8);
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+    uLong adler;
+    const Bytef *buf;
+    uInt len;
+{
+    unsigned long s1 = adler & 0xffff;
+    unsigned long s2 = (adler >> 16) & 0xffff;
+    int k;
+
+    if (buf == Z_NULL) return 1L;
+
+    while (len > 0) {
+        k = len < NMAX ? len : NMAX;
+        len -= k;
+        while (k >= 16) {
+            DO16(buf);
+	    buf += 16;
+            k -= 16;
+        }
+        if (k != 0) do {
+            s1 += *buf++;
+	    s2 += s1;
+        } while (--k);
+        s1 %= BASE;
+        s2 %= BASE;
+    }
+    return (s2 << 16) | s1;
+}

zlib/algorithm.txt

+1. Compression algorithm (deflate)
+
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
+LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
+the input data.  The second occurrence of a string is replaced by a
+pointer to the previous string, in the form of a pair (distance,
+length).  Distances are limited to 32K bytes, and lengths are limited
+to 258 bytes. When a string does not occur anywhere in the previous
+32K bytes, it is emitted as a sequence of literal bytes.  (In this
+description, `string' must be taken as an arbitrary sequence of bytes,
+and is not restricted to printable characters.)
+
+Literals or match lengths are compressed with one Huffman tree, and
+match distances are compressed with another tree. The trees are stored
+in a compact form at the start of each block. The blocks can have any
+size (except that the compressed data for one block must fit in
+available memory). A block is terminated when deflate() determines that
+it would be useful to start another block with fresh trees. (This is
+somewhat similar to the behavior of LZW-based _compress_.)
+
+Duplicated strings are found using a hash table. All input strings of
+length 3 are inserted in the hash table. A hash index is computed for
+the next 3 bytes. If the hash chain for this index is not empty, all
+strings in the chain are compared with the current input string, and
+the longest match is selected.
+
+The hash chains are searched starting with the most recent strings, to
+favor small distances and thus take advantage of the Huffman encoding.
+The hash chains are singly linked. There are no deletions from the
+hash chains, the algorithm simply discards matches that are too old.
+
+To avoid a worst-case situation, very long hash chains are arbitrarily
+truncated at a certain length, determined by a runtime option (level
+parameter of deflateInit). So deflate() does not always find the longest
+possible match but generally finds a match which is long enough.
+
+deflate() also defers the selection of matches with a lazy evaluation
+mechanism. After a match of length N has been found, deflate() searches for
+a longer match at the next input byte. If a longer match is found, the
+previous match is truncated to a length of one (thus producing a single
+literal byte) and the process of lazy evaluation begins again. Otherwise,
+the original match is kept, and the next match search is attempted only N
+steps later.
+
+The lazy match evaluation is also subject to a runtime parameter. If
+the current match is long enough, deflate() reduces the search for a longer
+match, thus speeding up the whole process. If compression ratio is more
+important than speed, deflate() attempts a complete second search even if
+the first match is already long enough.
+
+The lazy match evaluation is not performed for the fastest compression
+modes (level parameter 1 to 3). For these fast modes, new strings
+are inserted in the hash table only when no match was found, or
+when the match is not too long. This degrades the compression ratio
+but saves time since there are both fewer insertions and fewer searches.
+
+
+2. Decompression algorithm (inflate)
+
+2.1 Introduction
+
+The real question is, given a Huffman tree, how to decode fast.  The most
+important realization is that shorter codes are much more common than
+longer codes, so pay attention to decoding the short codes fast, and let
+the long codes take longer to decode.
+
+inflate() sets up a first level table that covers some number of bits of
+input less than the length of longest code.  It gets that many bits from the
+stream, and looks it up in the table.  The table will tell if the next
+code is that many bits or less and how many, and if it is, it will tell
+the value, else it will point to the next level table for which inflate()
+grabs more bits and tries to decode a longer code.
+
+How many bits to make the first lookup is a tradeoff between the time it
+takes to decode and the time it takes to build the table.  If building the
+table took no time (and if you had infinite memory), then there would only
+be a first level table to cover all the way to the longest code.  However,
+building the table ends up taking a lot longer for more bits since short
+codes are replicated many times in such a table.  What inflate() does is
+simply to make the number of bits in the first table a variable, and set it
+for the maximum speed.
+
+inflate() sends new trees relatively often, so it is possibly set for a
+smaller first level table than an application that has only one tree for
+all the data.  For inflate, which has 286 possible codes for the
+literal/length tree, the size of the first table is nine bits.  Also the
+distance trees have 30 possible values, and the size of the first table is
+six bits.  Note that for each of those cases, the table ended up one bit
+longer than the ``average'' code length, i.e. the code length of an
+approximately flat code which would be a little more than eight bits for
+286 symbols and a little less than five bits for 30 symbols.  It would be
+interesting to see if optimizing the first level table for other
+applications gave values within a bit or two of the flat code size.
+
+
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually  
+looks like.  You are correct that it's not a Huffman tree.  It is simply a  
+lookup table for the first, let's say, nine bits of a Huffman symbol.  The  
+symbol could be as short as one bit or as long as 15 bits.  If a particular  
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits.  For example, if the  
+symbol is four bits, then it's duplicated 32 times in a nine-bit table.  If a  
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points  
+to another similar table for the remaining bits.  Again, there are duplicated  
+entries as needed.  The idea is that most of the time the symbol will be short
+and there will only be one table look up.  (That's whole idea behind data  
+compression in the first place.)  For the less frequent long symbols, there  
+will be two lookups.  If you had a compression method with really long  
+symbols, you could have as many levels of lookups as is efficient.  For  
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in  
+the above example are gobbled), or it contains the translation for the symbol  
+and the number of bits to gobble.  Then you start again with the next  
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the  
+longest symbol is?  The reason is that if you do that, you end up spending  
+more time filling in duplicate symbol entries than you do actually decoding.   
+At least for deflate's output that generates new trees every several 10's of  
+kbytes.  You can imagine that filling in a 2^15 entry table for a 15-bit code  
+would take too long if you're only decoding several thousand symbols.  At the  
+other extreme, you could make a new table for every bit in the code.  In fact,
+that's essentially a Huffman tree.  But then you spend two much time  
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to  
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode to and how many bits that is, i.e. how  
+many bits to gobble.  Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six  
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to  
+be constructed.  That's compared to 64 entries for a single table.  Or  
+compared to 16 entries for a Huffman tree (six two entry tables and one four  
+entry table).  Assuming that the code ideally represents the probability of  
+the symbols, it takes on the average 1.25 lookups per symbol.  That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the  
+Huffman tree.
+
+There, I think that gives you a picture of what's going on.  For inflate, the  
+meaning of a particular symbol is often more than just a letter.  It can be a  
+byte (a "literal"), or it can be either a length or a distance which  
+indicates a base value and a number of bits to fetch after the code that is  
+added to the base value.  Or it might be the special end-of-block code.  The  
+data structures created in inftrees.c try to encode all that information  
+compactly in the tables.
+
+
+Jean-loup Gailly        Mark Adler
+jloup@gzip.org          madler@alumni.caltech.edu
+
+
+References:
+
+[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
+Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
+pp. 337-343.
+
+``DEFLATE Compressed Data Format Specification'' available in
+ftp://ds.internic.net/rfc/rfc1951.txt

zlib/amiga/Makefile.pup

+# Amiga powerUP (TM) Makefile
+# makefile for libpng and SAS C V6.58/7.00 PPC compiler
+# Copyright (C) 1998 by Andreas R. Kleinert
+
+CC       = scppc
+CFLAGS   = NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \
+           OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8
+LIBNAME  = libzip.a
+AR       = ppc-amigaos-ar
+AR_FLAGS = cr
+RANLIB   = ppc-amigaos-ranlib
+LDFLAGS  = -r -o
+LDLIBS   = LIB:scppc.a
+LN       = ppc-amigaos-ld
+RM       = delete quiet
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example minigzip
+
+test: all
+        example
+        echo hello world | minigzip | minigzip -d
+
+$(LIBNAME): $(OBJS)
+            $(AR) $(AR_FLAGS) $@ $(OBJS)
+            $(RANLIB) $@
+
+example: example.o $(LIBNAME)
+        $(LN) $(LDFLAGS) example LIB:c_ppc.o example.o $(LIBNAME) $(LDLIBS) LIB:end.o
+
+minigzip: minigzip.o $(LIBNAME)
+        $(LN) $(LDFLAGS) minigzip LIB:c_ppc.o minigzip.o $(LIBNAME) $(LDLIBS) LIB:end.o
+
+clean:
+        $(RM) *.o example minigzip $(LIBNAME) foo.gz
+
+zip:
+        zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \
+          descrip.mms *.[ch]
+
+tgz:
+        cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
+          zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zutil.h zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zutil.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

zlib/amiga/Makefile.sas

+# SMakefile for zlib
+# Modified from the standard UNIX Makefile Copyright Jean-loup Gailly
+# Osma Ahvenlampi <Osma.Ahvenlampi@hut.fi>
+# Amiga, SAS/C 6.56 & Smake
+
+CC=sc
+CFLAGS=OPT
+#CFLAGS=OPT CPU=68030
+#CFLAGS=DEBUG=LINE
+LDFLAGS=LIB z.lib
+
+SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
+       NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX 
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: SCOPTIONS example minigzip
+
+test: all
+	`cd`/example
+	echo hello world | minigzip | minigzip -d 
+
+install: z.lib
+	copy zlib.h zconf.h INCLUDE: clone
+	copy z.lib LIB: clone
+
+z.lib: $(OBJS)
+	oml z.lib r $(OBJS)
+
+example: example.o z.lib
+	$(CC) $(CFLAGS) LINK TO $@ example.o $(LDFLAGS)
+
+minigzip: minigzip.o z.lib
+	$(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS)
+
+clean:
+	-delete force quiet *.o example minigzip z.lib foo.gz *.lnk SCOPTIONS
+
+SCOPTIONS: Smakefile
+        copy to $@ <from <
+$(SCOPTIONS)
+<
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zutil.h zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zutil.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

zlib/compress.c

+/* compress.c -- compress a memory buffer
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* @(#) $Id$ */
+
+#include "zlib.h"
+
+/* ===========================================================================
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+    int level;
+{
+    z_stream stream;
+    int err;
+
+    stream.next_in = (Bytef*)source;
+    stream.avail_in = (uInt)sourceLen;
+#ifdef MAXSEG_64K
+    /* Check for source > 64K on 16-bit machine: */
+    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+#endif
+    stream.next_out = dest;
+    stream.avail_out = (uInt)*destLen;
+    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+    stream.zalloc = (alloc_func)0;
+    stream.zfree = (free_func)0;
+    stream.opaque = (voidpf)0;
+
+    err = deflateInit(&stream, level);
+    if (err != Z_OK) return err;
+
+    err = deflate(&stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        deflateEnd(&stream);
+        return err == Z_OK ? Z_BUF_ERROR : err;
+    }
+    *destLen = stream.total_out;
+
+    err = deflateEnd(&stream);
+    return err;
+}
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}

zlib/contrib/README.contrib

+All files under this contrib directory are UNSUPPORTED. There were
+provided by users of zlib and were not tested by the authors of zlib.
+Use at your own risk. Please contact the authors of the contributions
+for help about these, not the zlib authors. Thanks.
+
+
+asm386/     by Gilles Vollant <info@winimage.com>
+	386 asm code replacing longest_match(), for Visual C++ 4.2 and ML 6.11c
+
+asm586/ and asm686/    by Brian Raiter <breadbox@muppetlabs.com> 
+        asm code for Pentium and Pentium Pro
+        See http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+delphi/      by Bob Dellaca <bobdl@xtra.co.nz>
+	Support for Delphi
+
+delphi2/     by Davide Moretti <dave@rimini.com>
+        Another support for C++Builder and Delphi
+
+minizip/    by Gilles Vollant <info@winimage.com>
+	Mini zip and unzip based on zlib
+        See http://www.winimage.com/zLibDll/unzip.html
+
+iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+
+iostream2/  by Tyge Lvset <Tyge.Lovset@cmr.no>
+	Another C++ I/O streams interface
+
+untgz/      by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+	A very simple tar.gz file extractor using zlib
+
+visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.

zlib/contrib/asm386/gvmat32c.c

+/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86
+ * Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
+ * File written by Gilles Vollant, by modifiying the longest_match
+ *  from Jean-loup Gailly in deflate.c
+ *  it prepare all parameters and call the assembly longest_match_gvasm
+ *  longest_match execute standard C code is wmask != 0x7fff
+ *     (assembly code is faster with a fixed wmask)
+ *
+ */
+
+#include "deflate.h"
+
+#undef FAR
+#include <windows.h>
+
+#ifdef ASMV
+#define NIL 0
+
+#define UNALIGNED_OK
+
+
+/* if your C compiler don't add underline before function name,
+		define ADD_UNDERLINE_ASMFUNC */
+#ifdef ADD_UNDERLINE_ASMFUNC
+#define longest_match_7fff _longest_match_7fff
+#endif
+
+
+
+void match_init()
+{
+}
+
+unsigned long cpudetect32();
+
+uInt longest_match_c(
+    deflate_state *s,
+    IPos cur_match);                             /* current match */
+
+
+uInt longest_match_7fff(
+    deflate_state *s,
+    IPos cur_match);                             /* current match */
+
+uInt longest_match(
+    deflate_state *s,
+    IPos cur_match)                             /* current match */
+{
+	static uInt iIsPPro=2;
+
+    if ((s->w_mask == 0x7fff) && (iIsPPro==0))
+        return longest_match_7fff(s,cur_match);
+
+	if (iIsPPro==2)
+		iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
+
+	return longest_match_c(s,cur_match);
+}
+
+
+
+uInt longest_match_c(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    unsigned chain_length = s->max_chain_length;/* max hash chain length */
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    int best_len = s->prev_length;              /* best match length so far */
+    int nice_match = s->nice_match;             /* stop if match long enough */
+    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+        s->strstart - (IPos)MAX_DIST(s) : NIL;
+    /* Stop when cur_match becomes <= limit. To simplify the code,
+     * we prevent matches with the string of window index 0.
+     */
+    Posf *prev = s->prev;
+    uInt wmask = s->w_mask;
+
+#ifdef UNALIGNED_OK
+    /* Compare two bytes at a time. Note: this is not always beneficial.
+     * Try with and without -DUNALIGNED_OK to check.
+     */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
+    register ush scan_start = *(ushf*)scan;
+    register ush scan_end   = *(ushf*)(scan+best_len-1);
+#else
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+    register Byte scan_end1  = scan[best_len-1];
+    register Byte scan_end   = scan[best_len];
+#endif
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    /* Do not waste too much time if we already have a good match: */
+    if (s->prev_length >= s->good_match) {
+        chain_length >>= 2;
+    }
+    /* Do not look for matches beyond the end of the input. This is necessary
+     * to make deflate deterministic.
+     */
+    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    do {
+        Assert(cur_match < s->strstart, "no future");
+        match = s->window + cur_match;
+
+        /* Skip to next match if the match length cannot increase
+         * or if the match length is less than 2:
+         */
+#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
+        /* This code assumes sizeof(unsigned short) == 2. Do not use
+         * UNALIGNED_OK if your compiler uses a different size.
+         */
+        if (*(ushf*)(match+best_len-1) != scan_end ||
+            *(ushf*)match != scan_start) continue;
+
+        /* It is not necessary to compare scan[2] and match[2] since they are
+         * always equal when the other bytes match, given that the hash keys
+         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
+         * strstart+3, +5, ... up to strstart+257. We check for insufficient
+         * lookahead only every 4th comparison; the 128th check will be made
+         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
+         * necessary to put more guard bytes at the end of the window, or
+         * to check more often for insufficient lookahead.
+         */
+        Assert(scan[2] == match[2], "scan[2]?");
+        scan++, match++;
+        do {
+        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 scan < strend);
+        /* The funny "do {}" generates better code on most compilers */
+
+        /* Here, scan <= window+strstart+257 */
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+        if (*scan == *match) scan++;
+
+        len = (MAX_MATCH - 1) - (int)(strend-scan);
+        scan = strend - (MAX_MATCH-1);
+
+#else /* UNALIGNED_OK */
+
+        if (match[best_len]   != scan_end  ||
+            match[best_len-1] != scan_end1 ||
+            *match            != *scan     ||
+            *++match          != scan[1])      continue;
+
+        /* The check at best_len-1 can be removed because it will be made
+         * again later. (This heuristic is not always a win.)
+         * It is not necessary to compare scan[2] and match[2] since they
+         * are always equal when the other bytes match, given that
+         * the hash keys are equal and that HASH_BITS >= 8.
+         */
+        scan += 2, match++;
+        Assert(*scan == *match, "match[2]?");
+
+        /* We check for insufficient lookahead only every 8th comparison;
+         * the 256th check will be made at strstart+258.
+         */
+        do {
+        } while (*++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 scan < strend);
+
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+        len = MAX_MATCH - (int)(strend - scan);
+        scan = strend - MAX_MATCH;
+
+#endif /* UNALIGNED_OK */
+
+        if (len > best_len) {
+            s->match_start = cur_match;
+            best_len = len;
+            if (len >= nice_match) break;
+#ifdef UNALIGNED_OK
+            scan_end = *(ushf*)(scan+best_len-1);
+#else
+            scan_end1  = scan[best_len-1];
+            scan_end   = scan[best_len];
+#endif
+        }
+    } while ((cur_match = prev[cur_match & wmask]) > limit
+             && --chain_length != 0);
+
+    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+    return s->lookahead;
+}
+
+#endif /* ASMV */

zlib/contrib/asm386/mkgvmt32.bat

+c:\masm611\bin\ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm

zlib/contrib/asm386/zlibvc.def

+LIBRARY		"zlib"
+
+DESCRIPTION	'"""zlib data compression library"""'
+
+
+VERSION		1.11
+
+
+HEAPSIZE	1048576,8192
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41
+
+	unzOpen                       @61
+	unzClose                      @62
+	unzGetGlobalInfo              @63
+	unzGetCurrentFileInfo         @64
+	unzGoToFirstFile              @65
+	unzGoToNextFile               @66
+	unzOpenCurrentFile            @67
+	unzReadCurrentFile            @68
+	unztell                       @70
+	unzeof                        @71
+	unzCloseCurrentFile           @72
+	unzGetGlobalComment           @73
+	unzStringFileNameCompare      @74
+	unzLocateFile                 @75
+	unzGetLocalExtrafield         @76
+
+	zipOpen                       @80
+	zipOpenNewFileInZip           @81
+	zipWriteInFileInZip           @82
+	zipCloseFileInZip             @83
+	zipClose                      @84

zlib/contrib/asm386/zlibvc.dsw

+Microsoft Developer Studio Workspace File, Format Version 5.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "zlibstat"=.\zlibstat.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "zlibvc"=.\zlibvc.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

zlib/contrib/asm586/readme.586

+This is a patched version of zlib modified to use
+Pentium-optimized assembly code in the deflation algorithm. The files
+changed/added by this patch are:
+
+README.586
+match.S
+
+The effectiveness of these modifications is a bit marginal, as the the
+program's bottleneck seems to be mostly L1-cache contention, for which
+there is no real way to work around without rewriting the basic
+algorithm. The speedup on average is around 5-10% (which is generally
+less than the amount of variance between subsequent executions).
+However, when used at level 9 compression, the cache contention can
+drop enough for the assembly version to achieve 10-20% speedup (and
+sometimes more, depending on the amount of overall redundancy in the
+files). Even here, though, cache contention can still be the limiting
+factor, depending on the nature of the program using the zlib library.
+This may also mean that better improvements will be seen on a Pentium
+with MMX, which suffers much less from L1-cache contention, but I have
+not yet verified this.
+
+Note that this code has been tailored for the Pentium in particular,
+and will not perform well on the Pentium Pro (due to the use of a
+partial register in the inner loop).
+
+If you are using an assembler other than GNU as, you will have to
+translate match.S to use your assembler's syntax. (Have fun.)
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 1998
+
+
+Added for zlib 1.1.3:
+
+The patches come from
+http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+To compile zlib with this asm file, copy match.S to the zlib directory
+then do:
+
+CFLAGS="-O3 -DASMV" ./configure
+make OBJA=match.o

zlib/contrib/asm686/match.s

+/* match.s -- Pentium-Pro-optimized version of longest_match()
+ * Written for zlib 1.1.2
+ * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License.
+ */
+
+#ifndef NO_UNDERLINE
+#define	match_init	_match_init
+#define	longest_match	_longest_match
+#endif
+
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+
+#define	chainlenwmask		0	/* high word: current chain len	*/
+					/* low word: s->wmask		*/
+#define	window			4	/* local copy of s->window	*/
+#define	windowbestlen		8	/* s->window + bestlen		*/
+#define	scanstart		16	/* first two bytes of string	*/
+#define	scanend			12	/* last two bytes of string	*/
+#define	scanalign		20	/* dword-misalignment of string	*/
+#define	nicematch		24	/* a good enough match size	*/
+#define	bestlen			28	/* size of best match so far	*/
+#define	scan			32	/* ptr to string wanting match	*/
+
+#define	LocalVarsSize		(36)
+/*	saved ebx		36 */
+/*	saved edi		40 */
+/*	saved esi		44 */
+/*	saved ebp		48 */
+/*	return address		52 */
+#define	deflatestate		56	/* the function arguments	*/
+#define	curmatch		60
+
+/* Offsets for fields in the deflate_state structure. These numbers
+ * are calculated from the definition of deflate_state, with the
+ * assumption that the compiler will dword-align the fields. (Thus,
+ * changing the definition of deflate_state could easily cause this
+ * program to crash horribly, without so much as a warning at
+ * compile time. Sigh.)
+ */
+#define	dsWSize			36
+#define	dsWMask			44
+#define	dsWindow		48
+#define	dsPrev			56
+#define	dsMatchLen		88
+#define	dsPrevMatch		92
+#define	dsStrStart		100
+#define	dsMatchStart		104
+#define	dsLookahead		108
+#define	dsPrevLen		112
+#define	dsMaxChainLen		116
+#define	dsGoodMatch		132
+#define	dsNiceMatch		136
+
+
+.file "match.S"
+
+.globl	match_init, longest_match
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+
+/* Save registers that the compiler may be using, and adjust %esp to	*/
+/* make room for our stack frame.					*/
+
+		pushl	%ebp
+		pushl	%edi
+		pushl	%esi
+		pushl	%ebx
+		subl	$LocalVarsSize, %esp
+
+/* Retrieve the function arguments. %ecx will hold cur_match		*/
+/* throughout the entire function. %edx will hold the pointer to the	*/
+/* deflate_state structure during the function's setup (before		*/
+/* entering the main loop).						*/
+
+		movl	deflatestate(%esp), %edx
+		movl	curmatch(%esp), %ecx
+
+/* uInt wmask = s->w_mask;						*/
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	dsGoodMatch(%edx), %ebx
+		cmpl	%ebx, %eax
+		movl	dsWMask(%edx), %eax
+		movl	dsMaxChainLen(%edx), %ebx
+		jl	LastMatchGood
+		shrl	$2, %ebx
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the wmask	*/
+/* value, which it will always accompany.				*/
+
+		decl	%ebx
+		shll	$16, %ebx
+		orl	%eax, %ebx
+		movl	%ebx, chainlenwmask(%esp)
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch(%edx), %eax
+		movl	dsLookahead(%edx), %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, nicematch(%esp)
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		movl	dsWindow(%edx), %esi
+		movl	%esi, window(%esp)
+		movl	dsStrStart(%edx), %ebp
+		lea	(%esi,%ebp), %edi
+		movl	%edi, scan(%esp)
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		movl	%edi, %eax
+		negl	%eax
+		andl	$3, %eax
+		movl	%eax, scanalign(%esp)
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize(%edx), %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		subl	%eax, %ebp
+		jg	LimitPositive
+		xorl	%ebp, %ebp
+LimitPositive:
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	%eax, bestlen(%esp)
+
+/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
+
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+/* Posf *prev = s->prev;						*/
+
+		movzwl	(%edi), %ebx
+		movl	%ebx, scanstart(%esp)
+		movzwl	-1(%edi,%eax), %ebx
+		movl	%ebx, scanend(%esp)
+		movl	dsPrev(%edx), %edi
+
+/* Jump into the main loop.						*/
+
+		movl	chainlenwmask(%esp), %edx
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ *
+ * Within this loop:
+ * %ebx = scanend
+ * %ecx = curmatch
+ * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+ * %esi = windowbestlen - i.e., (window + bestlen)
+ * %edi = prev
+ * %ebp = limit
+ */
+LookupLoop:
+		andl	%edx, %ecx
+		movzwl	(%edi,%ecx,2), %ecx
+		cmpl	%ebp, %ecx
+		jbe	LeaveNow
+		subl	$0x00010000, %edx
+		js	LeaveNow
+LoopEntry:	movzwl	-1(%esi,%ecx), %eax
+		cmpl	%ebx, %eax
+		jnz	LookupLoop
+		movl	window(%esp), %eax
+		movzwl	(%eax,%ecx), %eax
+		cmpl	scanstart(%esp), %eax
+		jnz	LookupLoop
+
+/* Store the current value of chainlen.					*/
+
+		movl	%edx, chainlenwmask(%esp)
+
+/* Point %edi to the string under scrutiny, and %esi to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		movl	window(%esp), %esi
+		movl	scan(%esp), %edi
+		addl	%ecx, %esi
+		movl	scanalign(%esp), %eax
+		movl	$(-MAX_MATCH_8), %edx
+		lea	MAX_MATCH_8(%edi,%eax), %edi
+		lea	MAX_MATCH_8(%esi,%eax), %esi
+
+/* Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %edx so that it is offset to the exact byte that mismatched.
+ *
+ * We already know at this point that the first three bytes of the
+ * strings match each other, and they can be safely passed over before
+ * starting the compare loop. So what this code does is skip over 0-3
+ * bytes, as much as necessary in order to dword-align the %edi
+ * pointer. (%esi will still be misaligned three times out of four.)
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance.
+ */
+LoopCmps:
+		movl	(%esi,%edx), %eax
+		xorl	(%edi,%edx), %eax
+		jnz	LeaveLoopCmps
+		movl	4(%esi,%edx), %eax
+		xorl	4(%edi,%edx), %eax
+		jnz	LeaveLoopCmps4
+		addl	$8, %edx
+		jnz	LoopCmps
+		jmp	LenMaximum
+LeaveLoopCmps4:	addl	$4, %edx
+LeaveLoopCmps:	testl	$0x0000FFFF, %eax
+		jnz	LenLower
+		addl	$2, %edx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adcl	$0, %edx
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%edi,%edx), %eax
+		movl	scan(%esp), %edi
+		subl	%edi, %eax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		cmpl	%ebx, %eax
+		jg	LongerMatch
+		movl	windowbestlen(%esp), %esi
+		movl	dsPrev(%edx), %edi
+		movl	scanend(%esp), %ebx
+		movl	chainlenwmask(%esp), %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:	movl	nicematch(%esp), %ebx
+		movl	%eax, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+		cmpl	%ebx, %eax
+		jge	LeaveNow
+		movl	window(%esp), %esi
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+		movzwl	-1(%edi,%eax), %ebx
+		movl	dsPrev(%edx), %edi
+		movl	%ebx, scanend(%esp)
+		movl	chainlenwmask(%esp), %edx
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:	movl	deflatestate(%esp), %edx
+		movl	$MAX_MATCH, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		movl	dsLookahead(%edx), %eax
+		cmpl	%eax, %ebx
+		jg	LookaheadRet
+		movl	%ebx, %eax
+LookaheadRet:
+
+/* Restore the stack and return from whence we came.			*/
+
+		addl	$LocalVarsSize, %esp
+		popl	%ebx
+		popl	%esi
+		popl	%edi
+		popl	%ebp
+match_init:	ret

zlib/contrib/asm686/readme.686

+This is a patched version of zlib, modified to use
+Pentium-Pro-optimized assembly code in the deflation algorithm. The
+files changed/added by this patch are:
+
+README.686
+match.S
+
+The speedup that this patch provides varies, depending on whether the
+compiler used to build the original version of zlib falls afoul of the
+PPro's speed traps. My own tests show a speedup of around 10-20% at
+the default compression level, and 20-30% using -9, against a version
+compiled using gcc 2.7.2.3. Your mileage may vary.
+
+Note that this code has been tailored for the PPro/PII in particular,
+and will not perform particuarly well on a Pentium.
+
+If you are using an assembler other than GNU as, you will have to
+translate match.S to use your assembler's syntax. (Have fun.)
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 1998
+
+
+Added for zlib 1.1.3:
+
+The patches come from
+http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+To compile zlib with this asm file, copy match.S to the zlib directory
+then do:
+
+CFLAGS="-O3 -DASMV" ./configure
+make OBJA=match.o

zlib/contrib/delphi/zlib.mak

+# Makefile for zlib32bd.lib
+# ------------- Borland C++ 4.5 -------------
+
+# The (32-bit) zlib32bd.lib made with this makefile is intended for use 
+# in making the (32-bit) DLL, png32bd.dll. It uses the "stdcall" calling 
+# convention.
+
+CFLAGS= -ps -O2 -C -K -N- -k- -d -3 -r- -w-par -w-aus -WDE
+CC=f:\bc45\bin\bcc32
+LIBFLAGS= /C
+LIB=f:\bc45\bin\tlib
+ZLIB=zlib32bd.lib
+
+.autodepend
+.c.obj:
+        $(CC) -c $(CFLAGS) $<
+
+OBJ1=adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj 
+OBJ2=infcodes.obj inflate.obj inftrees.obj infutil.obj inffast.obj 
+OBJ3=trees.obj uncompr.obj zutil.obj
+pOBJ1=+adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infblock.obj 
+pOBJ2=+infcodes.obj+inflate.obj+inftrees.obj+infutil.obj+inffast.obj 
+pOBJ3=+trees.obj+uncompr.obj+zutil.obj
+
+all: $(ZLIB)
+
+$(ZLIB): $(OBJ1) $(OBJ2) $(OBJ3)
+        @if exist $@ del $@
+        $(LIB) @&&|
+$@ $(LIBFLAGS) &
+$(pOBJ1) &
+$(pOBJ2) &
+$(pOBJ3)
+|
+
+# End of makefile for zlib32bd.lib

zlib/contrib/delphi/zlibdef.pas

+unit zlibdef;
+
+interface
+
+uses
+  Windows;
+
+const
+  ZLIB_VERSION = '1.1.3';
+
+type
+  voidpf = Pointer;
+  int    = Integer;
+  uInt   = Cardinal;
+  pBytef = PChar;
+  uLong  = Cardinal;
+
+  alloc_func = function(opaque: voidpf; items, size: uInt): voidpf;
+                    stdcall;
+  free_func  = procedure(opaque, address: voidpf);
+                    stdcall;
+
+  internal_state = Pointer;
+
+  z_streamp = ^z_stream;
+  z_stream = packed record
+    next_in: pBytef;          // next input byte
+    avail_in: uInt;           // number of bytes available at next_in
+    total_in: uLong;          // total nb of input bytes read so far
+
+    next_out: pBytef;         // next output byte should be put there
+    avail_out: uInt;          // remaining free space at next_out
+    total_out: uLong;         // total nb of bytes output so far
+
+    msg: PChar;               // last error message, NULL if no error
+    state: internal_state;    // not visible by applications
+
+    zalloc: alloc_func;       // used to allocate the internal state
+    zfree: free_func;         // used to free the internal state
+    opaque: voidpf;           // private data object passed to zalloc and zfree
+
+    data_type: int;           // best guess about the data type: ascii or binary
+    adler: uLong;             // adler32 value of the uncompressed data
+    reserved: uLong;          // reserved for future use
+    end;
+
+const
+  Z_NO_FLUSH      = 0;
+  Z_SYNC_FLUSH    = 2;
+  Z_FULL_FLUSH    = 3;
+  Z_FINISH        = 4;
+
+  Z_OK            = 0;
+  Z_STREAM_END    = 1;
+
+  Z_NO_COMPRESSION         =  0;
+  Z_BEST_SPEED             =  1;
+  Z_BEST_COMPRESSION       =  9;
+  Z_DEFAULT_COMPRESSION    = -1;
+
+  Z_FILTERED            = 1;
+  Z_HUFFMAN_ONLY        = 2;
+  Z_DEFAULT_STRATEGY    = 0;
+
+  Z_BINARY   = 0;
+  Z_ASCII    = 1;
+  Z_UNKNOWN  = 2;
+
+  Z_DEFLATED    = 8;
+
+  MAX_MEM_LEVEL = 9;
+
+function adler32(adler: uLong; const buf: pBytef; len: uInt): uLong;
+             stdcall;
+function crc32(crc: uLong; const buf: pBytef; len: uInt): uLong;
+             stdcall;
+function deflate(strm: z_streamp; flush: int): int;
+             stdcall;
+function deflateCopy(dest, source: z_streamp): int;
+             stdcall;
+function deflateEnd(strm: z_streamp): int;
+             stdcall;
+function deflateInit2_(strm: z_streamp; level, method,
+                       windowBits, memLevel, strategy: int;
+                       const version: PChar; stream_size: int): int;
+             stdcall;
+function deflateInit_(strm: z_streamp; level: int;
+                      const version: PChar; stream_size: int): int;
+             stdcall;
+function deflateParams(strm: z_streamp; level, strategy: int): int;
+             stdcall;
+function deflateReset(strm: z_streamp): int;
+             stdcall;
+function deflateSetDictionary(strm: z_streamp;
+                              const dictionary: pBytef;
+                              dictLength: uInt): int;
+             stdcall;
+function inflate(strm: z_streamp; flush: int): int;
+             stdcall;
+function inflateEnd(strm: z_streamp): int;
+             stdcall;
+function inflateInit2_(strm: z_streamp; windowBits: int;
+                       const version: PChar; stream_size: int): int;
+             stdcall;
+function inflateInit_(strm: z_streamp; const version: PChar;
+                      stream_size: int): int;
+             stdcall;
+function inflateReset(strm: z_streamp): int;
+             stdcall;
+function inflateSetDictionary(strm: z_streamp;
+                              const dictionary: pBytef;
+                              dictLength: uInt): int;
+             stdcall;
+function inflateSync(strm: z_streamp): int;
+             stdcall;
+
+function deflateInit(strm: z_streamp; level: int): int;
+function deflateInit2(strm: z_streamp; level, method, windowBits,
+                      memLevel, strategy: int): int;
+function inflateInit(strm: z_streamp): int;
+function inflateInit2(strm: z_streamp; windowBits: int): int;
+
+implementation
+
+function deflateInit(strm: z_streamp; level: int): int;
+begin
+  Result := deflateInit_(strm, level, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function deflateInit2(strm: z_streamp; level, method, windowBits,
+                      memLevel, strategy: int): int;
+begin
+  Result := deflateInit2_(strm, level, method, windowBits, memLevel,
+                          strategy, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit(strm: z_streamp): int;
+begin
+  Result := inflateInit_(strm, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit2(strm: z_streamp; windowBits: int): int;
+begin
+  Result := inflateInit2_(strm, windowBits, ZLIB_VERSION,
+                          sizeof(z_stream));
+end;
+
+const
+  zlibDLL = 'png32bd.dll';
+
+function adler32; external zlibDLL;
+function crc32; external zlibDLL;
+function deflate; external zlibDLL;
+function deflateCopy; external zlibDLL;
+function deflateEnd; external zlibDLL;
+function deflateInit2_; external zlibDLL;
+function deflateInit_; external zlibDLL;
+function deflateParams; external zlibDLL;
+function deflateReset; external zlibDLL;
+function deflateSetDictionary; external zlibDLL;
+function inflate; external zlibDLL;
+function inflateEnd; external zlibDLL;
+function inflateInit2_; external zlibDLL;
+function inflateInit_; external zlibDLL;
+function inflateReset; external zlibDLL;
+function inflateSetDictionary; external zlibDLL;
+function inflateSync; external zlibDLL;
+
+end.

zlib/contrib/delphi2/d_zlib.bpr

+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = d_zlib.lib
+OBJFILES = d_zlib.obj adler32.obj deflate.obj infblock.obj infcodes.obj inffast.obj \
+  inflate.obj inftrees.obj infutil.obj trees.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = VCL35.lib
+SPARELIBS = VCL35.lib
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -Ve -d -k- -vi
+CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
+CFLAG3 = -ff -pr -5
+PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
+RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
+AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
+LFLAGS =
+IFLAGS = -g -Gn
+# ---------------------------------------------------------------------------
+ALLOBJ = c0w32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
+# ---------------------------------------------------------------------------
+!!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include
+Item1=$(BCB)\include;$(BCB)\include\vcl
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+ ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include;$(BCB)\include\vcl
+Item1=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------

zlib/contrib/delphi2/d_zlib.cpp

+#include <condefs.h>
+#pragma hdrstop
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("deflate.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+//---------------------------------------------------------------------------
+#define Library
+
+// To add a file to the library use the Project menu 'Add to Project'.
+

zlib/contrib/delphi2/readme.txt

+These are files used to compile zlib under Borland C++ Builder 3.
+
+zlib.bpg is the main project group that can be loaded in the BCB IDE and
+loads all other *.bpr projects
+
+zlib.bpr is a project used to create a static zlib.lib library with C calling
+convention for functions.
+
+zlib32.bpr creates a zlib32.dll dynamic link library with Windows standard
+calling convention.
+
+d_zlib.bpr creates a set of .obj files with register calling convention.
+These files are used by zlib.pas to create a Delphi unit containing zlib.
+The d_zlib.lib file generated isn't useful and can be deleted.
+
+zlib.cpp, zlib32.cpp and d_zlib.cpp are used by the above projects.
+

zlib/contrib/delphi2/zlib.bpg

+#------------------------------------------------------------------------------
+VERSION = BWS.01
+#------------------------------------------------------------------------------
+!ifndef ROOT
+ROOT = $(MAKEDIR)\..
+!endif
+#------------------------------------------------------------------------------
+MAKE = $(ROOT)\bin\make.exe -$(MAKEFLAGS) -f$**
+DCC = $(ROOT)\bin\dcc32.exe $**
+BRCC = $(ROOT)\bin\brcc32.exe $**
+#------------------------------------------------------------------------------
+PROJECTS = zlib zlib32 d_zlib
+#------------------------------------------------------------------------------
+default: $(PROJECTS)
+#------------------------------------------------------------------------------
+
+zlib: zlib.bpr
+  $(MAKE)
+
+zlib32: zlib32.bpr
+  $(MAKE)
+
+d_zlib: d_zlib.bpr
+  $(MAKE)
+
+

zlib/contrib/delphi2/zlib.bpr

+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = zlib.lib
+OBJFILES = zlib.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
+  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
+  uncompr.obj zutil.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = VCL35.lib
+SPARELIBS = VCL35.lib
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -Ve -d -k- -vi
+CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
+CFLAG3 = -ff -5
+PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
+RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
+AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
+LFLAGS =
+IFLAGS = -g -Gn
+# ---------------------------------------------------------------------------
+ALLOBJ = c0w32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
+# ---------------------------------------------------------------------------
+!!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include
+Item1=$(BCB)\include;$(BCB)\include\vcl
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+ ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include;$(BCB)\include\vcl
+Item1=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------

zlib/contrib/delphi2/zlib.cpp

+#include <condefs.h>
+#pragma hdrstop
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("compress.c");
+USEUNIT("crc32.c");
+USEUNIT("deflate.c");
+USEUNIT("gzio.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+USEUNIT("uncompr.c");
+USEUNIT("zutil.c");
+//---------------------------------------------------------------------------
+#define Library
+
+// To add a file to the library use the Project menu 'Add to Project'.
+

zlib/contrib/delphi2/zlib32.bpr

+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = zlib32.dll
+OBJFILES = zlib32.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
+  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
+  uncompr.obj zutil.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -WD -O2 -Ve -d -k- -vi -c -tWD
+CFLAG2 = -D_NO_VCL;ZLIB_DLL -I$(BCB)\include
+CFLAG3 = -ff -5
+PFLAGS = -D_NO_VCL;ZLIB_DLL -U$(BCB)\lib;$(RELEASELIBPATH) -I$(BCB)\include -$I- -v \
+  -JPHN -M
+RFLAGS = -D_NO_VCL;ZLIB_DLL -i$(BCB)\include
+AFLAGS = /i$(BCB)\include /d_NO_VCL /dZLIB_DLL /mx /w2 /zn
+LFLAGS = -L$(BCB)\lib;$(RELEASELIBPATH) -aa -Tpd -x -Gi
+IFLAGS = -Gn -g
+# ---------------------------------------------------------------------------
+ALLOBJ = c0d32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES)  import32.lib cw32mt.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=1
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=DLL (GUI)
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=1
+Item0=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib
+
+[HistoryLists\hlConditionals]
+Count=1
+Item0=_NO_VCL;ZLIB_DLL
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------

zlib/contrib/iostream/test.cpp

+
+#include "zfstream.h"
+
+int main() {
+
+  // Construct a stream object with this filebuffer.  Anything sent
+  // to this stream will go to standard out.
+  gzofstream os( 1, ios::out );
+
+  // This text is getting compressed and sent to stdout.
+  // To prove this, run 'test | zcat'.
+  os << "Hello, Mommy" << endl;
+
+  os << setcompressionlevel( Z_NO_COMPRESSION );
+  os << "hello, hello, hi, ho!" << endl;
+
+  setcompressionlevel( os, Z_DEFAULT_COMPRESSION )
+    << "I'm compressing again" << endl;
+
+  os.close();
+
+  return 0;
+
+}