Commit 9fc23406 authored by ranger@regul.home.lan's avatar ranger@regul.home.lan

Merge alstroganov@bk-internal.mysql.com:/home/bk/mysql-5.0

into  regul.home.lan:/mnt/md/bk/mysql-5.0
parents d3fbb135 e3b17f52
Overview
--------
Stress script is designed to perform testsing of mysql server in
multi-thread environment.
Stress script allows:
- to use for stress testing mysqltest binary as test engine
- to use for stress testing both regular test suite and any
additional test suites (e.g. mysql-test-extra-5.0)
- to specify files with lists of tests both for initialization of
stress db and for further testing itself
- to define number of threads that will be concurrently used in testing
- to define limitations for test run. e.g. number of tests or loops
for execution or duration of testing, delay between test executions, etc.
- to get readable log file which can be used for identification of
errors arose during testing
All functionality regarding stress testing was implemeted in
mysql-stress-test.pl script and there are two ways to run stress test:
- for most cases it is enough to use options below for starting of
stress test from mysql-test-run wrapper. In this case server will
be run automatically, all preparation steps will be performed
and after that stress test will be started.
- in advanced case one can run mysql-stress-test.pl script directly.
But it requires to perform some preparation steps and to specify a
bunch of options as well so this way may look a bit complicate.
Usage
-----
Below is list of stress test specific options for mysql-test-run:
--stress
Enable stress mode
--stress-suite=<suite name>
Test suite name that will be used in stress testing.
We assume that all suites are located in mysql-test/suite directory
There is one special suite name - <main|default> that corresponds
to regular test suite located in mysql-test directory.
--stress-threads=<number of threads>
Number of threads that will be used in stress testing
--stress-tests-file=<filename with list of tests>
Filename with list of tests(without .test suffix) that will be used in
stress testing. Default filename is stress_tests.txt and default
location of this file is suite/<suite name>/stress_tests.txt
--stress-init-file=<filename with list of tests>
Filename with list of tests(without .test suffix) that will be used in
stress testing for initialization of stress db. These tests will be
executed only once before starting of test itself. Default filename
is stress_init.txt and default location of this file is
suite/<suite name>/stress_init.txt
--stress-mode=<method which will be used for choosing tests from the list>
Possible values are: random(default), seq
There are two possible modes which affect order of selecting of tests
from the list:
- in random mode tests will be selected in random order
- in seq mode each thread will execute tests in the loop one by one as
they specified in the list file.
--stress-test-count= <number>
Total number of tests that will be executed concurrently by all threads
--stress-loop-count= <number>
Total number of loops in seq mode that will be executed concurrently
by all threads
--stress-test-duration= <number>
Duration of stress testing in seconds
Examples
--------
1. Example of simple command line to start stress test:
mysql-test-run --stress alias
Runs stress test with default values for number of threads and number of tests,
with test 'alias' from suite 'main'.
2. Using in stress testing tests from other suites:
- mysql-test-run --stress --stress-threads=10 --stress-test-count=1000 \
--stress-suite=example --stress-tests-file=testslist.txt
Will run stress test with 10 threads, will execute 1000 tests by all
threads, test will be used from suite 'example', list of test will be
taken from file 'testslist.txt'
- mysql-test-run --stress --stress-threads=10 --stress-test-count=1000 \
--stress-suite=example sum_distinct
Will run stress test with 10 threads, will execute 1000 tests by all
threads, test will be used from suite 'example', list of test contains
only one test 'sum_distinct'
3. Debugging of issues found with stress test
Right now stress test is not fully integrated in mysql-test-run
and does not support --gdb option so to debug issue found with stress
test you have to start separately mysql server under debuger and then
run stress test as:
- mysql-test-run --extern --stress --stress-threads=10 \
--stress-test-count=1000 --stress-suite=example \
sum_distinct
This diff is collapsed.
......@@ -256,6 +256,17 @@ NDB_MGM_EXTRA_OPTS=
NDB_MGMD_EXTRA_OPTS=
NDBD_EXTRA_OPTS=
DO_STRESS=""
STRESS_SUITE="main"
STRESS_MODE="random"
STRESS_THREADS=5
STRESS_TEST_COUNT=20
STRESS_LOOP_COUNT=""
STRESS_TEST_DURATION=""
STRESS_INIT_FILE=""
STRESS_TEST_FILE=""
STRESS_TEST=""
while test $# -gt 0; do
case "$1" in
--embedded-server)
......@@ -344,6 +355,35 @@ while test $# -gt 0; do
DO_BENCH=1
NO_SLAVE=1
;;
--stress)
DO_STRESS=1
NO_SLAVE=1
SKIP_SLAVE=1
;;
--stress-suite=*)
STRESS_SUITE=`$ECHO "$1" | $SED -e "s;--stress-suite=;;"`
;;
--stress-threads=*)
STRESS_THREADS=`$ECHO "$1" | $SED -e "s;--stress-threads=;;"`
;;
--stress-test-file=*)
STRESS_TEST_FILE=`$ECHO "$1" | $SED -e "s;--stress-test-file=;;"`
;;
--stress-init-file=*)
STRESS_INIT_FILE=`$ECHO "$1" | $SED -e "s;--stress-init-file=;;"`
;;
--stress-mode=*)
STRESS_MODE=`$ECHO "$1" | $SED -e "s;--stress-mode=;;"`
;;
--stress-loop-count=*)
STRESS_LOOP_COUNT=`$ECHO "$1" | $SED -e "s;--stress-loop-count=;;"`
;;
--stress-test-count=*)
STRESS_TEST_COUNT=`$ECHO "$1" | $SED -e "s;--stress-test-count=;;"`
;;
--stress-test-duration=*)
STRESS_TEST_DURATION=`$ECHO "$1" | $SED -e "s;--stress-test-duration=;;"`
;;
--big*) # Actually --big-test
EXTRA_MYSQL_TEST_OPT="$EXTRA_MYSQL_TEST_OPT $1" ;;
--compress)
......@@ -700,7 +740,7 @@ fi
# If we should run all tests cases, we will use a local server for that
if [ -z "$1" ]
if [ -z "$1" -a -z "$DO_STRESS" ]
then
USE_RUNNING_SERVER=0
fi
......@@ -1189,7 +1229,7 @@ start_master()
then
CURR_MASTER_MYSQLD_TRACE="$EXTRA_MASTER_MYSQLD_TRACE$1"
fi
if [ -z "$DO_BENCH" ]
if [ -z "$DO_BENCH" -a -z "$DO_STRESS" ]
then
master_args="--no-defaults --log-bin=$MYSQL_TEST_DIR/var/log/master-bin$1 \
--server-id=$id \
......@@ -1626,7 +1666,7 @@ run_testcase ()
stop_master 1
report_current_test $tname
start_master
if [ -n "$USE_NDBCLUSTER" -a -z "$DO_BENCH" ] ; then
if [ -n "$USE_NDBCLUSTER" -a -z "$DO_BENCH" -a -z "$DO_STRESS" ] ; then
start_master 1
fi
TZ=$MY_TZ; export TZ
......@@ -1642,7 +1682,7 @@ run_testcase ()
stop_master 1
report_current_test $tname
start_master
if [ -n "$USE_NDBCLUSTER" -a -z "$DO_BENCH" ] ; then
if [ -n "$USE_NDBCLUSTER" -a -z "$DO_BENCH" -a -z "$DO_STRESS" ] ; then
start_master 1
fi
else
......@@ -1763,6 +1803,125 @@ run_testcase ()
fi
}
run_stress_test()
{
STRESS_BASEDIR="$MYSQL_TEST_DIR/var/stress"
#Clean-up old stress test basedir
if [ -d $STRESS_BASEDIR ] ; then
$RM -rf $STRESS_BASEDIR
fi
#Create stress test basedir
mkdir $STRESS_BASEDIR
if [ "$STRESS_SUITE" != "main" -a "$STRESS_SUITE" != "default" ] ; then
STRESS_SUITE_DIR="$MYSQL_TEST_DIR/suite/$STRESS_SUITE"
else
STRESS_SUITE_DIR="$MYSQL_TEST_DIR"
fi
if [ -d "$STRESS_SUITE_DIR" ] ; then
STRESS_SUITE_T_DIR="$STRESS_SUITE_DIR/t"
STRESS_SUITE_R_DIR="$STRESS_SUITE_DIR/r"
#FIXME: check that dirs above are exist
else
echo "Directory $STRESS_SUITE_DIR with test suite doesn't exists. Abort stress testing"
exit 1
fi
if [ -n "$STRESS_TEST" ] ; then
STRESS_TEST_FILE="$STRESS_BASEDIR/stress_tests.txt"
echo $STRESS_TEST > $STRESS_TEST_FILE
elif [ -n "$STRESS_TEST_FILE" ] ; then
STRESS_TEST_FILE="$STRESS_SUITE_DIR/$STRESS_TEST_FILE"
if [ ! -f "$STRESS_TEST_FILE" ] ; then
echo "Specified file $STRESS_TEST_FILE with list of tests does not exist"
echo "Please ensure that file exists and has proper permissions"
exit 1
fi
else
STRESS_TEST_FILE="$STRESS_SUITE_DIR/stress_tests.txt"
if [ ! -f "$STRESS_TEST_FILE" ] ; then
echo "Default file $STRESS_TEST_FILE with list of tests does not exist."
echo "Please use --stress-test-file option to specify custom one or you can"
echo "just specify name of test for testing as last argument in command line"
exit 1
fi
fi
if [ -n "$STRESS_INIT_FILE" ] ; then
STRESS_INIT_FILE="$STRESS_SUITE_DIR/$STRESS_INIT_FILE"
if [ ! -f "$STRESS_INIT_FILE" ] ; then
echo "Specified file $STRESS_INIT_FILE with list of tests doesn't exist."
echo "Please ensure that file exists and has proper permissions"
exit 1
fi
else
STRESS_INIT_FILE="$STRESS_SUITE_DIR/stress_init.txt"
#Check for default init file
if [ ! -f "$STRESS_INIT_FILE" ] ; then
STRESS_INIT_FILE=""
fi
fi
if [ "$STRESS_MODE" != "random" -a "$STRESS_MODE" != "seq" ] ; then
echo "You specified wrong mode '$STRESS_MODE' for stress test."
echo "Correct values are 'random' or 'seq'"
exit 1
fi
STRESS_TEST_ARGS="--server-socket=$MASTER_MYSOCK \
--server-user=$DBUSER \
--server-database=$DB \
--stress-suite-basedir=$MYSQL_TEST_DIR \
--suite=$STRESS_SUITE \
--stress-tests-file=$STRESS_TEST_FILE \
--stress-basedir=$STRESS_BASEDIR \
--server-logs-dir=$STRESS_BASEDIR \
--stress-mode=$STRESS_MODE \
--mysqltest=$BASEDIR/client/mysqltest \
--threads=$STRESS_THREADS \
--verbose \
--cleanup \
--log-error-details \
--abort-on-error"
if [ -n "$STRESS_INIT_FILE" ] ; then
STRESS_TEST_ARGS="$STRESS_TEST_ARGS --stress-init-file=$STRESS_INIT_FILE"
fi
if [ -n "$STRESS_LOOP_COUNT" ] ; then
STRESS_TEST_ARGS="$STRESS_TEST_ARGS --loop-count=$STRESS_LOOP_COUNT"
fi
if [ -n "$STRESS_TEST_COUNT" ] ; then
STRESS_TEST_ARGS="$STRESS_TEST_ARGS --test-count=$STRESS_TEST_COUNT"
fi
if [ -n "$STRESS_TEST_DURATION" ] ; then
STRESS_TEST_ARGS="$STRESS_TEST_ARGS --test-duration=$STRESS_TEST_DURATION"
fi
echo "Stress test related variables:"
echo "TESTS - $1"
echo "STRESS - $DO_STRESS"
echo "STRESS_SUITE - $STRESS_SUITE"
echo "STRESS_TEST_FILE - $STRESS_TEST_FILE"
echo "STRESS_INIT_FILE - $STRESS_INIT_FILE"
echo "STRESS_THREADS - $STRESS_THREADS"
echo "STRESS_MODE - $STRESS_MODE"
echo "STRESS_TEST_COUNT - $STRESS_TEST_COUNT"
echo "STRESS_LOOP_COUNT - $STRESS_LOOP_COUNT"
echo "STRESS_TEST_DURATION - $STRESS_TEST_DURATION"
#echo "$STRESS_TEST_ARGS";
#Run stress test
$MYSQL_TEST_DIR/mysql-stress-test.pl $STRESS_TEST_ARGS
}
######################################################################
# Main script starts here
######################################################################
......@@ -1877,6 +2036,32 @@ then
exit
fi
#
# Stress testing
#
if [ "$DO_STRESS" = 1 ]
then
if [ -n "$1" ] ; then
STRESS_TEST="$1";
fi
if [ $USE_RUNNING_SERVER -eq 0 ] ; then
start_master
fi
run_stress_test
if [ $USE_RUNNING_SERVER -eq 0 ] ; then
mysql_stop
stop_manager
fi
exit
fi
$ECHO
if [ x$USE_TIMER = x1 ] ; then
$ECHO "TEST RESULT TIME (ms)"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment