Commit bd41a11b authored by jmiller@mysql.com's avatar jmiller@mysql.com

Merge jmiller@bk-internal.mysql.com:/home/bk/mysql-5.1-new

into  mysql.com:/home/ndbdev/jmiller/clones/mysql-5.1-new
parents 4b18b5e7 03464300
#
# Test of auto_increment with offset
#
#####################################
# By: JBM
# Date: 2006-02-10
# Change: NDB does not support auto inc
# in this usage. Currently there is no
# plan to implment. Skipping test when
# NDB is default engine.
#####################################
-- source include/not_ndb_default.inc
-- source include/master-slave.inc
eval create table t1 (a int not null auto_increment,b int, primary key (a)) engine=$engine_type2 auto_increment=3;
......
......@@ -30,7 +30,6 @@ data LONGBLOB, PRIMARY KEY(c1))ENGINE=$engine_type;
INSERT INTO test.t1 VALUES (NULL, NULL);
INSERT INTO test.t1 VALUES (NULL, repeat('a',1*1024));
INSERT INTO test.t1 VALUES (NULL, repeat('b',16*1024));
CHECK TABLE test.t1;
--echo
--echo **** Data Insert Validation Master Section test.t1 ****
......@@ -60,6 +59,9 @@ UPDATE t1 set data=repeat('c',17*1024) where c1 = 2;
--echo
SELECT LENGTH(data) FROM test.t1 WHERE c1 = 1;
SELECT LENGTH(data) FROM test.t1 WHERE c1 = 2;
# Sleep is needed for NDB to allow time for
# Injector thread to populate the bin log.
sleep 10;
save_master_pos;
connection slave;
sync_with_master;
......@@ -155,6 +157,9 @@ SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
FROM test.t2 WHERE c1=1;
SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
FROM test.t2 WHERE c1=2;
# Sleep is needed for NDB to allow time for
# Injector thread to populate the bin log.
sleep 15;
save_master_pos;
connection slave;
sync_with_master;
......
......@@ -46,7 +46,10 @@ CALL test.p2();
SELECT release_lock("test");
SELECT * FROM test.t1;
#show binlog events;
# Added sleep for use with NDB to ensure that
# the injector thread will populate log before
# we switch to the slave.
sleep 5;
sync_slave_with_master;
connection slave;
SELECT * FROM test.t1;
......
......@@ -5,7 +5,10 @@
# TEST: Use after insert and before inset triggers and stored procdures to #
# Update and insert data #
#############################################################################
# Change Auth: JBM #
# Date: 2006-02-14 #
# Change: Added error, sleep and comments (ndb) #
####################################################
# Begin clean up test section
connection master;
......@@ -25,12 +28,16 @@ CREATE TRIGGER test.t1_bi_t2 BEFORE INSERT ON test.t2 FOR EACH ROW INSERT INTO t
delimiter ;//
INSERT INTO test.t2 VALUES (1, 0.0);
--error 0,1062
# Expect duplicate error 1022 == ndb
--error 1022,1062
INSERT INTO test.t2 VALUES (1, 0.0);
#show binlog events;
select * from test.t1;
select * from test.t2;
# Have to sleep for a few seconds to allow
# NDB injector thread to populate binlog
sleep 10;
sync_slave_with_master;
connection slave;
select * from test.t1;
......
--require r/true.require
disable_query_log;
select convert(@@table_type using latin1) NOT IN ("ndbcluster","NDBCLUSTER") as "TRUE";
enable_query_log;
This diff is collapsed.
......@@ -4,7 +4,7 @@ reset master;
reset slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
start slave;
create table t1 (a int);
create table t1 (a int primary key);
create table t2 (a int);
insert into t1 values (1);
insert into t2 values (1);
......
......@@ -24,7 +24,7 @@ use mysqltest_to;
select * from a;
i
3
create table t1 (a int);
create table t1 (a int primary key);
create table t2 (a int);
insert into t1 values (1);
insert into t2 values (1);
......
......@@ -4,116 +4,94 @@ reset master;
reset slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
start slave;
create table t1 (a int not null auto_increment,b int, primary key (a)) engine=myisam auto_increment=3;
***************** Test 1 ************************
CREATE TABLE t1 (a INT NOT NULL auto_increment,b INT, PRIMARY KEY (a)) ENGINE=NDB auto_increment=3;
insert into t1 values (NULL,1),(NULL,2),(NULL,3);
select * from t1;
******* Select from Master *************
select * from t1 ORDER BY a;
a b
12 1
22 2
32 3
select * from t1;
3 1
4 2
5 3
******* Select from Slave *************
select * from t1 ORDER BY a;
a b
12 1
22 2
32 3
3 1
4 2
5 3
drop table t1;
create table t1 (a int not null auto_increment,b int, primary key (a)) engine=myisam;
create table t1 (a int not null auto_increment,b int, primary key (a)) engine=NDB;
insert into t1 values (1,1),(NULL,2),(3,3),(NULL,4);
delete from t1 where b=4;
insert into t1 values (NULL,5),(NULL,6);
select * from t1;
******* Select from Master *************
select * from t1 ORDER BY a;
a b
1 1
2 2
3 3
22 5
32 6
select * from t1;
5 5
6 6
******* Select from Slave *************
select * from t1 ORDER BY a;
a b
1 1
2 2
3 3
22 5
32 6
5 5
6 6
drop table t1;
set @@session.auto_increment_increment=100, @@session.auto_increment_offset=10;
show variables like "%auto_inc%";
Variable_name Value
auto_increment_increment 100
auto_increment_offset 10
create table t1 (a int not null auto_increment, primary key (a)) engine=myisam;
create table t1 (a int not null auto_increment, primary key (a)) engine=NDB;
insert into t1 values (NULL),(5),(NULL);
insert into t1 values (250),(NULL);
select * from t1;
a
5
10
110
250
310
insert into t1 values (1000);
set @@insert_id=400;
insert into t1 values(NULL),(NULL);
select * from t1;
a
5
10
110
250
310
400
410
1000
select * from t1;
a
5
10
110
250
310
400
410
1000
drop table t1;
create table t1 (a int not null auto_increment, primary key (a)) engine=innodb;
insert into t1 values (NULL),(5),(NULL);
insert into t1 values (250),(NULL);
select * from t1;
******* Select from Master *************
select * from t1 ORDER BY a;
a
1
5
10
110
6
250
310
251
insert into t1 values (1000);
set @@insert_id=400;
insert into t1 values(NULL),(NULL);
select * from t1;
******* Select from Master *************
select * from t1 ORDER BY a;
a
1
5
10
110
6
250
310
251
400
410
1000
select * from t1;
1001
******* Select from Slave *************
select * from t1 ORDER BY a;
a
1
5
10
110
6
250
310
251
400
410
1000
1001
drop table t1;
set @@session.auto_increment_increment=1, @@session.auto_increment_offset=1;
create table t1 (a int not null auto_increment, primary key (a)) engine=myisam;
create table t1 (a int not null auto_increment, primary key (a)) engine=NDB;
insert into t1 values (NULL),(5),(NULL),(NULL);
insert into t1 values (500),(NULL),(502),(NULL),(NULL);
select * from t1;
insert into t1 values (500),(NULL),(502),(NULL),(600);
******* Select from Master *************
select * from t1 ORDER BY a;
a
1
5
......@@ -123,13 +101,15 @@ a
501
502
503
504
600
set @@insert_id=600;
insert into t1 values(600),(NULL),(NULL);
ERROR 23000: Duplicate entry '600' for key 1
ERROR 23000: Can't write; duplicate key in table 't1'
set @@insert_id=600;
insert ignore into t1 values(600),(NULL),(NULL),(610),(NULL);
select * from t1;
******* Select from Master *************
select * from t1 ORDER BY a;
a
1
5
......@@ -139,11 +119,14 @@ a
501
502
503
504
600
603
604
610
611
select * from t1;
******* Select from Slave *************
select * from t1 ORDER BY a;
a
1
5
......@@ -153,33 +136,39 @@ a
501
502
503
504
600
603
604
610
611
drop table t1;
set @@session.auto_increment_increment=10, @@session.auto_increment_offset=1;
create table t1 (a int not null auto_increment, primary key (a)) engine=myisam;
create table t1 (a int not null auto_increment, primary key (a)) engine=NDB;
insert into t1 values(2),(12),(22),(32),(42);
insert into t1 values (NULL),(NULL);
insert into t1 values (3),(NULL),(NULL);
select * from t1;
******* Select from Master *************
select * from t1 ORDER BY a;
a
1
2
3
11
21
31
select * from t1;
4
5
******* Select from Slave *************
** Slave should have 2, 12, 22, 32, 42 **
** Master will have 2 but not 12, 22, 32, 42 **
select * from t1 ORDER BY a;
a
1
2
3
11
4
5
12
21
22
31
32
42
drop table t1;
stop slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
reset master;
reset slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
start slave;
DROP TABLE IF EXISTS test.t1;
DROP TABLE IF EXISTS test.t2;
***** Table Create Section ****
CREATE TABLE test.t1 (c1 int not null auto_increment,
data LONGBLOB, PRIMARY KEY(c1))ENGINE=#;
**** Data Insert Section test.t1 *****
INSERT INTO test.t1 VALUES (NULL, NULL);
INSERT INTO test.t1 VALUES (NULL, repeat('a',1*1024));
INSERT INTO test.t1 VALUES (NULL, repeat('b',16*1024));
**** Data Insert Validation Master Section test.t1 ****
SELECT LENGTH(data) FROM test.t1 WHERE c1 = 1;
LENGTH(data)
NULL
SELECT LENGTH(data) FROM test.t1 WHERE c1 = 2;
LENGTH(data)
1024
SELECT LENGTH(data) FROM test.t1 WHERE c1 = 3;
LENGTH(data)
16384
**** Data Insert Validation Slave Section test.t1 ****
SELECT LENGTH(data) FROM test.t1 WHERE c1 = 1;
LENGTH(data)
NULL
SELECT LENGTH(data) FROM test.t1 WHERE c1 = 2;
LENGTH(data)
1024
SELECT LENGTH(data) FROM test.t1 WHERE c1 = 3;
LENGTH(data)
16384
**** Data Update Section test.t1 ****
UPDATE test.t1 set data=repeat('a',18*1024) where c1 = 1;
UPDATE t1 set data=repeat('c',17*1024) where c1 = 2;
**** Data Update Validation Master Section test.t1 ****
SELECT LENGTH(data) FROM test.t1 WHERE c1 = 1;
LENGTH(data)
18432
SELECT LENGTH(data) FROM test.t1 WHERE c1 = 2;
LENGTH(data)
17408
**** Data Update Validation Slave Section test.t1 ****
SELECT LENGTH(data) FROM test.t1 WHERE c1 = 1;
LENGTH(data)
18432
SELECT LENGTH(data) FROM test.t1 WHERE c1 = 2;
LENGTH(data)
17408
**** End Test Section test.t1 ****
**** Create Table test.t2 ****
CREATE TABLE test.t2 (
c1 INT NOT NULL PRIMARY KEY,
c2 TEXT,
c3 INT,
c4 LONGBLOB,
KEY(c3))ENGINE=#;
*** Setup Values For test.t2 ***
set @x0 = '01234567012345670123456701234567';
set @x0 = concat(@x0,@x0,@x0,@x0,@x0,@x0,@x0,@x0);
set @b1 = 'b1';
set @b1 = concat(@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1);
set @b1 = concat(@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1);
set @b1 = concat(@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1);
set @b1 = concat(@b1,@x0);
set @d1 = 'dd1';
set @d1 = concat(@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1);
set @d1 = concat(@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1);
set @d1 = concat(@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1);
set @b2 = 'b2';
set @b2 = concat(@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2);
set @b2 = concat(@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2);
set @b2 = concat(@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2);
set @b2 = concat(@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2);
set @d2 = 'dd2';
set @d2 = concat(@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2);
set @d2 = concat(@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2);
set @d2 = concat(@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2);
set @d2 = concat(@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2);
**** Data Insert Section test.t2 *****
INSERT INTO test.t2 VALUES(1,@b1,111,@d1);
INSERT INTO test.t2 VALUES(2,@b2,222,@d2);
**** Data Insert Validation Master Section test.t2 ****
SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
FROM test.t2 WHERE c1=1;
c1 LENGTH(c2) SUBSTR(c2,1+2*900,2) LENGTH(c4) SUBSTR(c4,1+3*900,3)
1 2256 b1 3000 dd1
SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
FROM test.t2 WHERE c1=2;
c1 LENGTH(c2) SUBSTR(c2,1+2*900,2) LENGTH(c4) SUBSTR(c4,1+3*900,3)
2 20000 b2 30000 dd2
**** Data Insert Validation Slave Section test.t2 ****
SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
FROM test.t2 WHERE c1=1;
c1 LENGTH(c2) SUBSTR(c2,1+2*900,2) LENGTH(c4) SUBSTR(c4,1+3*900,3)
1 2256 b1 3000 dd1
SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
FROM test.t2 WHERE c1=2;
c1 LENGTH(c2) SUBSTR(c2,1+2*900,2) LENGTH(c4) SUBSTR(c4,1+3*900,3)
2 20000 b2 30000 dd2
**** Data Update Section test.t2 ****
UPDATE test.t2 SET c2=@b2, c4=@d2 WHERE c1=1;
UPDATE test.t2 SET c2=@b1, c4=@d1 WHERE c1=2;
**** Data Update Validation Master Section test.t2 ****
SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
FROM test.t2 WHERE c1=1;
c1 LENGTH(c2) SUBSTR(c2,1+2*900,2) LENGTH(c4) SUBSTR(c4,1+3*900,3)
1 20000 b2 30000 dd2
SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
FROM test.t2 WHERE c1=2;
c1 LENGTH(c2) SUBSTR(c2,1+2*900,2) LENGTH(c4) SUBSTR(c4,1+3*900,3)
2 2256 b1 3000 dd1
**** Data Update Validation Slave Section test.t2 ****
SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
FROM test.t2 WHERE c1=1;
c1 LENGTH(c2) SUBSTR(c2,1+2*900,2) LENGTH(c4) SUBSTR(c4,1+3*900,3)
1 20000 b2 30000 dd2
SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
FROM test.t2 WHERE c1=2;
c1 LENGTH(c2) SUBSTR(c2,1+2*900,2) LENGTH(c4) SUBSTR(c4,1+3*900,3)
2 2256 b1 3000 dd1
DROP TABLE IF EXISTS test.t1;
DROP TABLE IF EXISTS test.t2;
stop slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
reset master;
reset slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
start slave;
create table t1 (a int, b int) engine=NDB;
insert into t1 values(1,1);
select * from t1;
a b
1 1
delete from t1;
select * from t1;
a b
drop table t1;
......@@ -70,3 +70,4 @@ row2 new on slave 2
SHOW SLAVE STATUS;
Slave_IO_State Master_Host Master_User Master_Port Connect_Retry Master_Log_File Read_Master_Log_Pos Relay_Log_File Relay_Log_Pos Relay_Master_Log_File Slave_IO_Running Slave_SQL_Running Replicate_Do_DB Replicate_Ignore_DB Replicate_Do_Table Replicate_Ignore_Table Replicate_Wild_Do_Table Replicate_Wild_Ignore_Table Last_Errno Last_Error Skip_Counter Exec_Master_Log_Pos Relay_Log_Space Until_Condition Until_Log_File Until_Log_Pos Master_SSL_Allowed Master_SSL_CA_File Master_SSL_CA_Path Master_SSL_Cert Master_SSL_Cipher Master_SSL_Key Seconds_Behind_Master
<Slave_IO_State> 127.0.0.1 root MASTER_PORT 1 master-bin.000001 <Read_Master_Log_Pos> <Relay_Log_File> <Relay_Log_Pos> master-bin.000001 Yes Yes <Replicate_Ignore_Table> 0 0 <Exec_Master_Log_Pos> <Relay_Log_Space> None 0 No <Seconds_Behind_Master>
DROP TABLE IF EXISTS t1;
stop slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
reset master;
reset slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
start slave;
DROP PROCEDURE IF EXISTS test.p1;
DROP PROCEDURE IF EXISTS test.p2;
DROP TABLE IF EXISTS test.t1;
CREATE TABLE test.t1(a INT,PRIMARY KEY(a))ENGINE=NDBCLUSTER;
CREATE PROCEDURE test.p1()
BEGIN
INSERT INTO test.t1 VALUES (4);
SELECT get_lock("test", 100);
UPDATE test.t1 set a=a+4 WHERE a=4;
END|
CREATE PROCEDURE test.p2()
BEGIN
UPDATE test.t1 SET a=a+1;
END|
SELECT get_lock("test", 200);
get_lock("test", 200)
1
CALL test.p1();
CALL test.p2();
SELECT release_lock("test");
release_lock("test")
1
SELECT * FROM test.t1;
a
5
SELECT * FROM test.t1;
a
5
DROP TABLE IF EXISTS test.t1;
CREATE TABLE test.t1(a INT,PRIMARY KEY(a))ENGINE=NDBCLUSTER;
CALL test.p2();
CALL test.p1();
get_lock("test", 100)
0
SELECT * FROM test.t1;
a
8
SELECT * FROM test.t1;
a
8
DROP PROCEDURE IF EXISTS test.p1;
DROP PROCEDURE IF EXISTS test.p2;
DROP TABLE IF EXISTS test.t1;
stop slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
reset master;
reset slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
start slave;
create database if not exists mysqltest1;
DROP PROCEDURE IF EXISTS mysqltest1.p1;
DROP PROCEDURE IF EXISTS mysqltest1.p2;
DROP TABLE IF EXISTS mysqltest1.t2;
DROP TABLE IF EXISTS mysqltest1.t1;
CREATE TABLE IF NOT EXISTS mysqltest1.t1(name CHAR(16), birth DATE,PRIMARY KEY(name))ENGINE=NDBCLUSTER;
CREATE TABLE IF NOT EXISTS mysqltest1.t2(name CHAR(16), age INT ,PRIMARY KEY(name))ENGINE=NDBCLUSTER;
CREATE PROCEDURE mysqltest1.p1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE spa CHAR(16);
DECLARE spb INT;
DECLARE cur1 CURSOR FOR SELECT name,
(YEAR(CURDATE())-YEAR(birth))-(RIGHT(CURDATE(),5)<RIGHT(birth,5))
FROM mysqltest1.t1;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
SET AUTOCOMMIT=0;
REPEAT
FETCH cur1 INTO spa, spb;
IF NOT done THEN
START TRANSACTION;
INSERT INTO mysqltest1.t2 VALUES (spa,spb);
COMMIT;
END IF;
UNTIL done END REPEAT;
SET AUTOCOMMIT=1;
CLOSE cur1;
END|
CREATE PROCEDURE mysqltest1.p2()
BEGIN
INSERT INTO mysqltest1.t1 VALUES ('MySQL','1993-02-04'),('ROCKS', '1990-08-27'),('Texas', '1999-03-30'),('kyle','2005-1-1');
END|
CALL mysqltest1.p2();
CALL mysqltest1.p1();
DROP PROCEDURE IF EXISTS mysqltest1.p1;
DROP PROCEDURE IF EXISTS mysqltest1.p2;
DROP TABLE IF EXISTS mysqltest1.t1;
DROP TABLE IF EXISTS mysqltest1.t2;
stop slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
reset master;
reset slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
start slave;
DROP PROCEDURE IF EXISTS test.p1;
DROP TABLE IF EXISTS test.t1;
CREATE PROCEDURE test.p1(IN i INT)
BEGIN
DECLARE CONTINUE HANDLER FOR sqlexception BEGIN END;
DROP TABLE IF EXISTS test.t1;
CREATE TABLE test.t1 (num INT,PRIMARY KEY(num))ENGINE=NDBCLUSTER;
START TRANSACTION;
INSERT INTO test.t1 VALUES(i);
savepoint t1_save;
INSERT INTO test.t1 VALUES (14);
ROLLBACK to savepoint t1_save;
COMMIT;
END|
< ---- Master selects-- >
-------------------------
CALL test.p1(12);
Warnings:
Note 1051 Unknown table 't1'
SELECT * FROM test.t1;
num
12
< ---- Slave selects-- >
------------------------
SELECT * FROM test.t1;
num
12
< ---- Master selects-- >
-------------------------
CALL test.p1(13);
SELECT * FROM test.t1;
num
13
< ---- Slave selects-- >
------------------------
SELECT * FROM test.t1;
num
13
DROP PROCEDURE IF EXISTS test.p1;
DROP TABLE IF EXISTS test.t1;
......@@ -25,11 +25,13 @@ hex(c2) hex(c3) c1
0 1 BCDEF
1 0 CD
0 0 DEFGHIJKL
CREATE TEMPORARY TABLE cluster_replication.backup_info (id INT, backup_id INT) ENGINE=HEAP;
CREATE TEMPORARY TABLE IF NOT EXISTS cluster_replication.backup_info (id INT, backup_id INT)ENGINE=HEAP;
DELETE FROM cluster_replication.backup_info;
LOAD DATA INFILE '../../var/tmp.dat' INTO TABLE cluster_replication.backup_info FIELDS TERMINATED BY ',';
SELECT @the_backup_id:=backup_id FROM cluster_replication.backup_info;
@the_backup_id:=backup_id
<the_backup_id>
DROP TABLE cluster_replication.backup_info;
UPDATE t1 SET c2=0 WHERE c3="row2";
SELECT hex(c1),hex(c2),c3 FROM t1 ORDER BY c3;
hex(c1) hex(c2) c3
......
stop slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
reset master;
reset slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
start slave;
DROP TRIGGER test.t1_bi_t2;
DROP TABLE IF EXISTS test.t1;
DROP TABLE IF EXISTS test.t2;
CREATE TABLE test.t1 (n MEDIUMINT NOT NULL AUTO_INCREMENT, d FLOAT, PRIMARY KEY(n))ENGINE=NDB;
CREATE TABLE test.t2 (n MEDIUMINT NOT NULL, f FLOAT, PRIMARY KEY(n))ENGINE=NDB;
CREATE TRIGGER test.t1_bi_t2 BEFORE INSERT ON test.t2 FOR EACH ROW INSERT INTO test.t1 VALUES (NULL, 1.234)//
INSERT INTO test.t2 VALUES (1, 0.0);
INSERT INTO test.t2 VALUES (1, 0.0);
Got one of the listed errors
select * from test.t1;
n d
1 1.234
select * from test.t2;
n f
1 0
select * from test.t1;
n d
1 1.234
select * from test.t2;
n f
1 0
DROP TRIGGER test.t1_bi_t2;
DROP TABLE test.t1;
DROP TABLE test.t2;
......@@ -11,7 +11,7 @@ set @var1= "from-master-1";
execute stmt1 using @var1;
set @var1= "from-master-2-'',";
execute stmt1 using @var1;
select * from t1;
SELECT * FROM t1 ORDER BY n;
n
from-master-1
from-master-2-'',
......@@ -19,7 +19,7 @@ set @var2= 'insert into t1 values (concat("from-var-", ?))';
prepare stmt2 from @var2;
set @var1='from-master-3';
execute stmt2 using @var1;
select * from t1;
SELECT * FROM t1 ORDER BY n;
n
from-master-1
from-master-2-'',
......
......@@ -12,6 +12,7 @@ CREATE TABLE test.t2 (n MEDIUMINT NOT NULL, f FLOAT, PRIMARY KEY(n))ENGINE=INNOD
CREATE TRIGGER test.t1_bi_t2 BEFORE INSERT ON test.t2 FOR EACH ROW INSERT INTO test.t1 VALUES (NULL, 1.234)//
INSERT INTO test.t2 VALUES (1, 0.0);
INSERT INTO test.t2 VALUES (1, 0.0);
Got one of the listed errors
select * from test.t1;
n d
1 1.234
......
......@@ -4,6 +4,9 @@ reset master;
reset slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
start slave;
DROP TABLE IF EXISTS t1;
DROP TABLE IF EXISTS t2;
DROP TABLE IF EXISTS t3;
create table t1 (a int auto_increment, primary key (a), b int, rand_value double not null);
create table t2 (a int auto_increment, primary key (a), b int);
create table t3 (a int auto_increment, primary key (a), name varchar(64) not null, old_a int, old_b int, rand_value double not null);
......
......@@ -9,7 +9,6 @@
# Do not use any TAB characters for whitespace.
#
##############################################################################
events : Test case instability - infinite locking. To be fixed.
func_group : Bug#15448
func_math : Bug#15448
......@@ -19,6 +18,7 @@ ndb_autodiscover : Needs to be fixed w.r.t binlog
ndb_autodiscover2 : Needs to be fixed w.r.t binlog
ndb_binlog_basic : Results are not deterministic, Tomas will fix
ndb_binlog_ddl_multi : Bug#17038 [PATCH PENDING]
ndb_dd_backuprestore : Bug#17045 NdbDictionaryImpl::fix_blob_events causes core
ndb_gis : garbled msgs from corrupt THD*
ndb_load : Bug#17233
partition_03ndb : Bug#16385
......@@ -27,7 +27,9 @@ rpl_bit_npk : Bug#13418
rpl_ddl : Bug#15963 SBR does not show "Definer" correctly
rpl_ndb_auto_inc : Bug#17086
rpl_ndb_basic : Bug#16228 [IN REVIEW]
rpl_ndb_delete_nowhere : Bug#17400: Cluster Replication: delete of rows in table without pk fails
rpl_ndb_relay_space : Bug#16993
rpl_ndb_sp007 : Bug #17290
rpl_sp : Bug#16456
rpl_until : Unstable test case, bug#15886
sp-goto : GOTO is currently is disabled - will be fixed in the future
......
This diff is collapsed.
########################################################
# By JBM 2006-02-14 Wrapped to share test code between #
# engines. Added to skip test when NDB is default #
########################################################
-- source include/not_ndb_default.inc
let $engine_type=myisam;
-- source extra/rpl_tests/rpl_EE_err.test
###################################################
# By JBM 2006-02-14 added to skip test when NDB #
##################################################
-- source include/not_ndb_default.inc
let $engine_type=myisam;
-- source extra/rpl_tests/rpl_delete_no_where.test
......@@ -36,6 +36,9 @@ delimiter ;|
CALL test.p1();
SELECT * FROM test.t1 ORDER BY blob_column;
save_master_pos;
# Need to allow some time when NDB engine is used for
# the injector thread to have time to populate binlog
sleep 10;
sync_slave_with_master;
connection slave;
SELECT * FROM test.t1 ORDER BY blob_column;
......
source include/master-slave.inc;
create table t1 (a int);
create table t1 (a int primary key);
create table t2 (a int);
insert into t1 values (1);
insert into t2 values (1);
delete t1.* from t1, t2 where t1.a = t2.a;
save_master_pos;
......
......@@ -36,7 +36,7 @@ select * from a;
# BUG#3461
connection master;
create table t1 (a int);
create table t1 (a int primary key);
create table t2 (a int);
insert into t1 values (1);
......
--auto-increment-increment=10 --auto-increment-offset=2
#
# Test of auto_increment in CRBR
#
#####################################
# Wrapper for rpl_auto_increment.test#
# By: JBM
# Date: 2006-02-10
# Change: Augmented test to use with cluster
#####################################
-- source include/have_innodb.inc
let $engine_type=NDB;
let $engine_type2=myisam;
-- source extra/rpl_tests/rpl_auto_increment.test
-- source include/master-slave.inc
--echo ***************** Test 1 ************************
--echo
CREATE TABLE t1 (a INT NOT NULL auto_increment,b INT, PRIMARY KEY (a)) ENGINE=NDB auto_increment=3;
insert into t1 values (NULL,1),(NULL,2),(NULL,3);
--echo ******* Select from Master *************
--echo
select * from t1 ORDER BY a;
sync_slave_with_master;
--echo ******* Select from Slave *************
--echo
select * from t1 ORDER BY a;
connection master;
drop table t1;
create table t1 (a int not null auto_increment,b int, primary key (a)) engine=NDB;
insert into t1 values (1,1),(NULL,2),(3,3),(NULL,4);
delete from t1 where b=4;
insert into t1 values (NULL,5),(NULL,6);
--echo ******* Select from Master *************
--echo
select * from t1 ORDER BY a;
sync_slave_with_master;
--echo ******* Select from Slave *************
--echo
select * from t1 ORDER BY a;
connection master;
drop table t1;
create table t1 (a int not null auto_increment, primary key (a)) engine=NDB;
# Insert with 2 insert statements to get better testing of logging
insert into t1 values (NULL),(5),(NULL);
insert into t1 values (250),(NULL);
--echo ******* Select from Master *************
--echo
select * from t1 ORDER BY a;
insert into t1 values (1000);
set @@insert_id=400;
insert into t1 values(NULL),(NULL);
--echo ******* Select from Master *************
--echo
select * from t1 ORDER BY a;
sync_slave_with_master;
--echo ******* Select from Slave *************
--echo
select * from t1 ORDER BY a;
connection master;
drop table t1;
create table t1 (a int not null auto_increment, primary key (a)) engine=NDB;
# Insert with 2 insert statements to get better testing of logging
insert into t1 values (NULL),(5),(NULL),(NULL);
insert into t1 values (500),(NULL),(502),(NULL),(600);
--echo ******* Select from Master *************
--echo
select * from t1 ORDER BY a;
set @@insert_id=600;
# We expect a duplicate key error that we will ignore below
--error 1022
insert into t1 values(600),(NULL),(NULL);
set @@insert_id=600;
insert ignore into t1 values(600),(NULL),(NULL),(610),(NULL);
--echo ******* Select from Master *************
--echo
select * from t1 ORDER BY a;
sync_slave_with_master;
--echo ******* Select from Slave *************
--echo
select * from t1 ORDER BY a;
connection master;
drop table t1;
#
# Test that auto-increment works when slave has rows in the table
#
create table t1 (a int not null auto_increment, primary key (a)) engine=NDB;
sync_slave_with_master;
insert into t1 values(2),(12),(22),(32),(42);
connection master;
insert into t1 values (NULL),(NULL);
insert into t1 values (3),(NULL),(NULL);
--echo ******* Select from Master *************
--echo
select * from t1 ORDER BY a;
sync_slave_with_master;
--echo ******* Select from Slave *************
--echo
--echo ** Slave should have 2, 12, 22, 32, 42 **
--echo ** Master will have 2 but not 12, 22, 32, 42 **
--echo
select * from t1 ORDER BY a;
connection master;
drop table t1;
# End cleanup
sync_slave_with_master;
#################################
# Wrapper for rpl_row_blob.test #
# Using wrapper to share test #
# code between engine tests #
#################################
-- source include/have_ndb.inc
let $engine_type=NDBCLUSTER;
-- source extra/rpl_tests/rpl_row_blob.test
#########################################
# By JBM 2006-02-14 Test wrapping to #
# Share test code between engine tests #
#########################################
let $engine_type=NDB;
-- source extra/rpl_tests/rpl_delete_no_where.test
......@@ -109,3 +109,8 @@ SELECT * FROM t1;
--replace_result $MASTER_MYPORT MASTER_PORT
--replace_column 1 <Slave_IO_State> 7 <Read_Master_Log_Pos> 8 <Relay_Log_File> 9 <Relay_Log_Pos> 16 <Replicate_Ignore_Table> 22 <Exec_Master_Log_Pos> 23 <Relay_Log_Space> 33 <Seconds_Behind_Master>
SHOW SLAVE STATUS;
connection master;
DROP TABLE IF EXISTS t1;
# End of 5.1 Test
#################################
# Wrapper for rpl_row_sp003.test#
# These tests have been wrapped #
# so the same code can be used #
# For different engines #
#################################
-- source include/have_ndb.inc
let $engine_type=NDBCLUSTER;
-- source extra/rpl_tests/rpl_row_sp003.test
#################################
# Wrapper for rpl_row_sp006.test#
# These tests have been wrapped #
# so the same code can be used #
# For different engines #
#################################
-- source include/have_ndb.inc
let $engine_type=NDBCLUSTER;
-- source extra/rpl_tests/rpl_row_sp006.test
#################################
# Wrapper for rpl_row_sp007.test#
# These tests have been wrapped #
# so the same code can be used #
# For different engines #
#################################
-- source include/have_ndb.inc
let $engine_type=NDBCLUSTER;
-- source extra/rpl_tests/rpl_row_sp007.test
......@@ -27,12 +27,13 @@ SELECT hex(c2),hex(c3),c1 FROM t2 ORDER BY c1;
# take a backup on master
--exec $NDB_MGM --no-defaults --ndb-connectstring="localhost:$NDBCLUSTER_PORT" -e "start backup" >> $NDB_TOOLS_OUTPUT
--exec $NDB_TOOLS_DIR/ndb_select_all --no-defaults --ndb-connectstring="localhost:$NDBCLUSTER_PORT" -d sys --delimiter=',' SYSTAB_0 | grep 520093696 > var/tmp.dat
CREATE TEMPORARY TABLE cluster_replication.backup_info (id INT, backup_id INT) ENGINE=HEAP;
CREATE TEMPORARY TABLE IF NOT EXISTS cluster_replication.backup_info (id INT, backup_id INT)ENGINE=HEAP;
DELETE FROM cluster_replication.backup_info;
LOAD DATA INFILE '../../var/tmp.dat' INTO TABLE cluster_replication.backup_info FIELDS TERMINATED BY ',';
--replace_column 1 <the_backup_id>
SELECT @the_backup_id:=backup_id FROM cluster_replication.backup_info;
let the_backup_id=`select @the_backup_id` ;
DROP TABLE cluster_replication.backup_info;
# update a row
UPDATE t1 SET c2=0 WHERE c3="row2";
SELECT hex(c1),hex(c2),c3 FROM t1 ORDER BY c3;
......@@ -129,3 +130,5 @@ connection slave;
reset slave;
# should now contain nothing
select * from cluster_replication.apply_status;
# End 5.1 Test
#############################################################################
# Original Author: JBM #
# Original Date: 2006-02-14 #
#############################################################################
# TEST: Use before insert triggers and has the second insert fail #
# Test is wrapped to save code and share between engines #
#############################################################################
# Includes
-- source include/have_binlog_format_row.inc
-- source include/have_ndb.inc
-- source include/master-slave.inc
let $engine_type=NDB;
-- source extra/rpl_tests/rpl_trig004.test
......@@ -3,9 +3,14 @@
# You can replace OPTIMIZE by REPAIR.
#####################################
# Change Author: JBM
# Change Date: 2006-01-17
# Change:
# Change Date: 2006-02-09
# Change: NDB does not and will not support
# OPTIMIZE for memory tables. If and when
# it does support for Disk Data, a new
# version of this test will be need.
# Skipping this test if default engine = ndb
#####################################
-- source include/not_ndb_default.inc
-- source include/master-slave.inc
create table t1 (a int not null auto_increment primary key, b int, key(b));
......
#
# Test of replicating user variables
#
###########################################################
# 2006-02-08 By JBM added order by for use w/ NDB engine
###########################################################
source include/master-slave.inc;
#save_master_pos;
......@@ -20,7 +23,7 @@ set @var1= "from-master-1";
execute stmt1 using @var1;
set @var1= "from-master-2-'',";
execute stmt1 using @var1;
select * from t1;
SELECT * FROM t1 ORDER BY n;
set @var2= 'insert into t1 values (concat("from-var-", ?))';
prepare stmt2 from @var2;
......@@ -30,7 +33,7 @@ execute stmt2 using @var1;
save_master_pos;
connection slave;
sync_with_master;
select * from t1;
SELECT * FROM t1 ORDER BY n;
connection master;
......
......@@ -4,8 +4,12 @@
#############################################################################
# TEST: Use before insert triggers and has the second insert fail #
#############################################################################
# Change by JBM 2006-02-14 added to skip when NDB default engine #
# This test has been wrapped to allow multipal engines to use same code #
#############################################################################
# Includes
-- source include/not_ndb_default.inc
-- source include/have_binlog_format_row.inc
-- source include/have_innodb.inc
-- source include/master-slave.inc
......
......@@ -3,7 +3,14 @@
# Adding statement include due to Bug 12574
# TODO: Remove statement include once 12574 is patched
--source include/have_binlog_format_statement.inc
source include/master-slave.inc;
--source include/master-slave.inc
--disable_warnings
DROP TABLE IF EXISTS t1;
DROP TABLE IF EXISTS t2;
DROP TABLE IF EXISTS t3;
--enable_warnings
#
# #12482: Triggers has side effects with auto_increment values
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment