Merge bk-internal:/home/bk/mysql-4.1-build

into  sergbook.mysql.com:/usr/home/serg/Abk/mysql-4.1

Docs/.cvsignore

-COPYING
-COPYING.LIB
+INSTALL-SOURCE
 INSTALL-BINARY
 Makefile
 Makefile.in
-Manual-updates
-before-gpl-changes-manual.texi
-include.texi
-manual-before-gpl.texi
-manual-tmp.aux
-manual-tmp.cp
-manual-tmp.fn
-manual-tmp.ky
-manual-tmp.log
-manual-tmp.pdf
-manual-tmp.pg
-manual-tmp.texi
-manual-tmp.toc
-manual-tmp.tp
-manual-tmp.vr
-manual.aux
-manual.cp
-manual.cps
-manual.fn
-manual.fns
-manual.html
-manual.ky
-manual.log
-manual.pdf
-manual.pg
-manual.toc
-manual.tp
-manual.txt
-manual.vr
-manual_a4.ps
-manual_a4.ps.gz
-manual_letter.ps
-manual_letter.ps.gz
-manual_toc.html
 mysql.info

Docs/Support/.cvsignore

-manual.html
-manual_toc.html

Docs/Support/colspec-fix.pl

-#!/usr/bin/perl -w
-
-#
-# Script to rewrite colspecs from relative values to absolute values
-#
-
-# arjen 2002-03-14 append "cm" specifier to colwidth field.
-
-use strict;
-
-my $table_width  = 12.75; # Specify the max width of the table in cm
-my $gutter_width =  0.55; # Specify the width of the gutters in cm
-
-my $str = join '', <>; # Push stdin (or file)
-
-$str =~ s{([\t ]*(<colspec colwidth=\".+?\" />\s*)+)}
-         {&rel2abs($1)}ges;
-
-print STDOUT $str;
-exit;
-
-#
-# Definitions for helper sub-routines
-#
-
-sub msg {
-    print STDERR shift, "\n";
-}
-
-sub rel2abs {
-    my $str           = shift;
-    my $colnum        = 1;
-    
-    my @widths        = ();
-    my $total         = 0;
-    my $output        = '';
-    
-    my $gutters;
-    my $content_width;
-    my $total_width;
-    my @num_cache;
-    
-    $str =~ /^(\s+)/;
-    my $ws = $1;
-    
-    while ($str =~ m/<colspec colwidth="(\d+)\*" \/>/g) {
-        $total += $1;
-        push @widths, $1;
-    }
-
-    msg("!!! WARNING: Total Percent > 100%: $total%") if $total > 100;
-
-    if (! $total) {
-        die 'Something bad has happened - the script believes that there are no columns';
-    }
-
-    $gutters = $#widths * $gutter_width;
-    $content_width = $table_width - $gutters;
-    # Don't forget that $#... is the last offset not the count
-
-    foreach (@widths) {
-        my $temp = sprintf ("%0.2f", $_/100 * $content_width);
-        $total_width += $temp;
-
-        if ($total_width > $content_width) {
-            $temp -= $total_width - $content_width;
-            msg("!!! WARNING: Column width reduced from " .
-                ($temp + ($total_width - $content_width)) . " to $temp !!!");
-            $total_width -= $total_width - $content_width;
-        }
-        
-        $output .= $ws . '<colspec colnum="'. $colnum .'" colwidth="'. $temp .'cm" />' . "\n";
-        ++$colnum;
-        push @num_cache, $temp;
-    }
-   
-    return $output . "\n$ws";
-}

Docs/Support/docbook-fixup.pl

-#!/usr/bin/perl -w
-
-# Fix the output of `makeinfo --docbook` version 4.0c
-# Convert the broken docbook output to well-formed XML that conforms to the O'Reilly idiom
-# See code for detailed comments
-# Authors: Arjen Lentz and Zak Greant (original code by Jeremy Cole)
-
-use strict;
-
-my $data  = '';
-my @apx   = ();
-my $apx   = '';
-my @nodes = ();
-my $nodes = '';
-
-msg ("-- Post-processing `makeinfo --docbook` output --");
-msg ("** Written to work with makeinfo version 4.0c **\n");
-
-msg ("Discarding DTD - not required by subsequent scripts");
-# <> is a magic filehandle - either reading lines from stdin or from file(s) specified on the command line
-<>;
-
-msg ("Create an XML PI with ISO-8859-1 character encoding");
-$data = "<?xml version='1.0' encoding='ISO-8859-1'?>";
-
-msg ("Get the rest of the data");
-$data = $data . join "", <>;
-
-msg ("Add missing <bookinfo> and <abstract> opening tags");
-# Note the absence of the g (global) pattern modified. This situation can only happen once.
-# ...as soon as we find the first instance, we can stop looking.
-$data =~ s/<book lang="en">/<book lang="en"><bookinfo><abstract>/;
-
-
-# arjen 2002-05-01
-msg ("Processing docbook-prefix special strings");
-$data =~ s/FIXUPmdashFIXUP/\&mdash\;/g;
-
-$data =~ s/FIXUPdoubledashFIXUP/--/g;
-
-$data =~ s/FIXUPstrongFIXUP/<emphasis\ role\=\"bold\">/g;
-$data =~ s/FIXUPendstrongFIXUP/<\/emphasis>/g;
-
-$data =~ s/FIXUPemphFIXUP/<emphasis>/g;
-$data =~ s/FIXUPendemphFIXUP/<\/emphasis>/g;
-
-$data =~ s/FIXUPfileFIXUP/<filename>/g;
-$data =~ s/FIXUPendfileFIXUP/<\/filename>/g;
-
-$data =~ s/FIXUPsampFIXUP/<literal>/g;
-$data =~ s/FIXUPendsampFIXUP/<\/literal>/g;
-
-
-msg ("Removing mailto: from email addresses...");
-$data =~ s/mailto://g;
-
-msg ("Removing INFORMALFIGURE...");
-$data =~ s{<informalfigure>.+?</informalfigure>}
-          {}gs;
-
-msg ("Convert ampersand to XML escape sequence...");
-$data =~ s/&(?!\w+;)/&amp;/g;
-
-# arjen 2002-05-01
-msg ("Changing (TM) to XML escape sequence...");
-$data =~ s/MySQL \(TM\)/MySQL&trade;/g;
-$data =~ s{<command>TM</command>}
-          {&trade;}g;
-
-# arjen 2002-05-01
-msg ("Changing ' -- ' to XML escape sequence...");
-$data =~ s/ -- /&mdash;/g;
-
-msg ("Changing @@ to @...");
-$data =~ s/@@/@/g;
-
-msg ("Rework references of the notation '<n>'");
-# Need to talk to Arjen about what the <n> bits are for
-$data =~ s/<(\d)>/[$1]/g;
-
-msg ("Changing '_' to '-' in references...");
-$data =~ s{((?:id|linkend)=\".+?\")}
-          {&underscore2hyphen($1)}gex;
-
-msg ("Changing ULINK to SYSTEMITEM...");
-$data =~ s{<ulink url=\"(.+?)\">\s*</ulink>}
-          {<systemitem role=\"url\">$1</systemitem>}gs;
-
-msg ("Adding PARA inside ENTRY...");
-$data =~ s{<entry>(.*?)</entry>}
-          {<entry><para>$1</para></entry>}gs;
-
-msg ("Fixing spacing problem with titles...");
-$data =~ s{(</\w+>)(\w{2,})}
-          {$1 $2}gs;
-
-msg ("Adding closing / to XREF and COLSPEC tags...");
-$data =~ s{<(xref|colspec) (.+?)>}
-          {<$1 $2 />}gs;
-
-# arjen 2002-04-26
-msg ("Removing separate target titles from LINKs and make them XREFs...");
-$data =~ s{<link (linkend=.+?)>.+?</link>}
-          {<xref $1 />}gs;
-
-# Probably need to strip these
-msg ('Adding "See " to XREFs that used to be @xref...');
-$data =~ s{([.'!)])\s*<xref }
-          {$1 See <xref }gs;
-
-msg ('Adding "see " to (XREFs) that used to be (@pxref)...');
-$data =~ s{([([,;])(\s*)<xref }
-          {$1$2see <xref }gs;
-
-msg ("Making first row in table THEAD...");
-$data =~ s{( *)<tbody>(\s*<row>.+?</row>)}
-          {$1<thead>$2\n$1</thead>\n$1<tbody>}gs;
-
-msg ("Removing EMPHASIS inside THEAD...");
-$data =~ s{<thead>(.+?)</thead>}
-          {"<thead>".&strip_tag($1, 'emphasis')."</thead>"}gsex;
-
-msg ("Removing empty PARA...");
-$data =~ s{<para>\s*</para>}
-          {}gs;
-
-msg ("Removing lf before /PARA in ENTRY...");
-$data =~ s{\n(</para></entry>)}
-          {$1}gs;
-
-msg ("Removing whitespace before /PARA if not on separate line...");
-$data =~ s{(\S+)[\t ]+</para>}
-          {$1</para>}g;
-
-msg ("Removing PARA around INDEXTERM if no text in PARA...");
-$data =~ s{<para>((?:<indexterm role=\"[^"]+\">(?:<(primary|secondary)>[^>]+</\2>)+?</indexterm>)+?)\s*</para>}
-          {$1}gs;
-
-@apx = ("Users", "MySQL Testimonials", "News", "GPL-license", "LGPL-license");
-
-foreach $apx (@apx) {
-    msg ("Removing appendix $apx...");
-    $data =~ s{<appendix id=\"$apx\">(.+?)</appendix>}
-              {}gs;
-
-    # Skip to next appendix regex if the regex did not match anything
-    next unless (defined $&);
-    
-    msg ("...Building list of removed nodes...");
-    
-    # Split the last bracketed regex match into an array
-    # Extract the node names from the tags and push them into an array
-    foreach (split "\n", $&) {
-        push @nodes, $1 if /<\w+ id=\"(.+?)\">/
-    }
-}
-
-# 2002-02-22 arjen@mysql.com (added fix " /" to end of regex, to make it match)
-msg ("Fixing references to removed nodes...");
-# Merge the list of node names into a set of regex alternations
-$nodes = join "|", @nodes;
-
-# Find all references to removed nodes and convert them to absolute URLs
-$data =~ s{<\w+ linkend="($nodes)" />}
-          {&xref2link($1)}ges;
-
-print STDOUT $data;
-exit;
-
-#
-# Definitions for helper sub-routines
-#
-
-sub msg {
-    print STDERR "docbook-fixup:", shift, "\n";
-}
-
-sub strip_tag($$) {
-    (my $str, my $tag) = @_;
-    $str =~ s{<$tag>(.+?)</$tag>}{$1}gs;
-    return $str;
-}
-
-sub underscore2hyphen($) {
-    my $str = shift;
-    $str =~ tr/_/-/;
-    return $str;
-}
-
-sub xref2link {
-    my $ref = shift;
-    $ref =~ tr/ /_/;
-    $ref =~ s{^((.)(.).+)$}{$2/$3/$1.html};
-    return "http://www.mysql.com/doc/" . $ref;
-}
-
-# We might need to encode the high-bit characters to ensure proper representation
-# msg ("Converting high-bit characters to entities");
-# $data =~ s/([\200-\400])/&get_entity($1)>/gs;
-# There is no get_entity function yet - no point writing it til we need it :)

Docs/Support/docbook-prefix.pl

-#!/usr/bin/perl -w
-
-# Preprocess the input of `makeinfo --docbook` version 4.0c
-# Authors: Arjen Lentz and Zak Greant (started by arjen 2002-05-01)
-
-use strict;
-
-my $data  = '';
-
-msg ("-- Pre-processing `makeinfo --docbook` input --");
-msg ("** Written to work with makeinfo version 4.0c **\n");
-
-# <> is a magic filehandle - either reading lines from stdin or from file(s) specified on the command line
-msg ("Get the data");
-$data = join "", <>;
-
-msg ("Replacing '\@-' with FIXUPmdashFIXUP");
-$data =~ s/\@-/FIXUPmdashFIXUP/g;
-
-msg ("Replacing '--' with FIXUPdoubledashFIXUP");
-$data =~ s/--/FIXUPdoubledashFIXUP/g;
-
-msg ("Turning \@strong{} into LITERAL blocks");
-$data =~ s/\@strong\{(.*?)\}/FIXUPstrongFIXUP$1FIXUPendstrongFIXUP/gs;
-
-msg ("Turning \@emph{} into LITERAL blocks");
-$data =~ s/\@emph\{(.*?)\}/FIXUPemphFIXUP$1FIXUPendemphFIXUP/gs;
-
-msg ("Turning \@file{} into LITERAL blocks");
-$data =~ s/\@file\{(.*?)\}/FIXUPfileFIXUP$1FIXUPendfileFIXUP/gs;
-
-msg ("Turning \@samp{} into LITERAL blocks");
-$data =~ s/\@samp\{\@\{\}/FIXUPsampFIXUP\@\{FIXUPendsampFIXUP/g;
-$data =~ s/\@samp\{\@\}\}/FIXUPsampFIXUP\@\}FIXUPendsampFIXUP/g;
-$data =~ s/\@samp\{\@\{n\@\}\}/FIXUPsampFIXUP\@\{n\@\}FIXUPendsampFIXUP/g;
-$data =~ s/\@samp\{(.*?)\}/FIXUPsampFIXUP$1FIXUPendsampFIXUP/gs;
-
-
-msg ("Write the data");
-print STDOUT $data;
-exit;
-
-#
-# Definitions for helper sub-routines
-#
-
-sub msg {
-    print STDERR "docbook-prefix: ", shift, "\n";
-}
-

Docs/Support/docbook-split

-#! /usr/bin/perl -w
-# O'Reilly's Perl script to chop mysql.xml into separate ch/apps/index files.
-# The indexes are actually not used, they're created straight from the xrefs.
-# Breaks the MySQL reference manual into chapters, appendices, and indexes.
-
-use strict;
-
-my $app_letter      = "a";                                  # Start appendix letters at "a"
-my $chap_num        = 1;                                    # Start chapter numbers at one (there is no preface)
-my $directory       = "mysql_refman_" . time;
-my $ext             = ".xml";
-my $line            = "";
-my $output_name     = "";
-my $start_text      = "";
-
-mkdir $directory unless -d $directory;
-
-while (defined $line) {
-    if ($line =~ /(<chapter.+)/i ) {
-        $start_text = $1;
-        $output_name = sprintf("ch%02d%s", $chap_num, $ext);
-        ++$chap_num;
-        &process_file("chapter");
-    }
-    elsif ($line =~ /(<appendix.+)/i ) {
-        $start_text = $1 ;
-        $output_name = "app$app_letter$ext";
-        ++$app_letter;
-        &process_file("appendix");
-    }
-    elsif ($line =~ /(<index\s+id=")(.*?)(">.*)/i ) {
-        $start_text = $1 . $2 . $3;
-        $output_name = lc($2) . $ext;
-        &process_file("index");
-    }
-    else {
-        # Skip junk in between chapters, appendices and indexes.
-        $line = <>;
-    }
-}
-
-sub process_file {
-    my $marker  = shift;
-    my $path    = "$directory/$output_name";
-
-    open (OUTPUT_FILE, ">$path") or die "Cannot open $path";
-
-    print STDERR "Creating $path\n";
-
-    # Print out XML PI
-    print OUTPUT_FILE "<?xml version='1.0' encoding='ISO-8859-1'?>\n";
-   
-    # Print whatever happened to appear at the end of the previous chapter.
-    print OUTPUT_FILE "$start_text\n" if $start_text;
-    
-    while (defined $line) {
-        $line = <>;
-
-        # Note: Anything after the terminating marker is lost, just like
-        # lines in between chapters.
-        if ($line =~ /(.*<\/\s*$marker\s*>)/i ) {
-            print OUTPUT_FILE "$1\n" if $1;
-            close OUTPUT_FILE;
-            return;
-        }
-        print OUTPUT_FILE $line;
-    }
-}
-
-exit 0;

Docs/Support/make-docbook

-#!/bin/sh
-# 2002-01-30 arjen@mysql.com
-# Use this to create mysql.xml (the DocBook XML format output of manual.texi)
-# Requires makeinfo 4.0c
-
-#create include.texi with version/port #
-        echo "@c This file is autogenerated by the Makefile" > include.texi
-        echo -n "@set mysql_version " >> include.texi
-#        grep "AM_INIT_AUTOMAKE(mysql, " ../configure.in | \
-#         sed -e 's;AM_INIT_AUTOMAKE(mysql, ;;' -e 's;);;' >> include.texi
-# 2002-04-26 arjen - the below just picks #.# instead of #.#.#-alpha
-# (code by mwagner - tnx)
-        grep "AM_INIT_AUTOMAKE(mysql, " ../configure.in | \
-         perl -p -e 's/AM_INIT_AUTOMAKE\(mysql,\s(\d+\.\d+)\..+/$1/' >> include.texi
-        echo -n "@set default_port " >> include.texi
-        grep "MYSQL_TCP_PORT_DEFAULT=" ../configure.in | \
-         sed -e 's;MYSQL_TCP_PORT_DEFAULT=;;' >> include.texi
-
-# produce DocBook XML
-        Support/docbook-prefix.pl < manual.texi |\
-         makeinfo --force --no-ifinfo --docbook -o - |\
-         Support/docbook-fixup.pl > mysql.xml
-    
-        # See if the XML output is well-formed
-        xmlwf mysql.xml
-
-        # If all is well, keep processing
-        cat mysql.xml | Support/colspec-fix.pl | Support/docbook-split;
-

Docs/Support/make-makefile

-#!/bin/sh
-# Use this when you have deleted Makefile and do not want to do a full
-# build to get it back
-
-cd ..
-automake --gnu Docs/Makefile
-CONFIG_FILES=Docs/Makefile CONFIG_HEADERS= sh ./config.status

Docs/Support/test-make-manual

-#!/bin/sh
-
-needed_flags=0
-needed_texi2html=0
-needed_texinfo_tex=0
-needed_include_texi=0
-
-if [ -z $BROWSER ]; then
-    BROWSER=netscape 
-    echo "BROWSER not set, using $BROWSER"
-fi
-
-die ()
-{
-    echo
-    echo $1
-    cleanup
-    exit 1
-}
-
-cleanup ()
-{
-    echo "Cleaning up..."
-    if [ $needed_flags ]; then
-        bk clean Flags
-    fi
-
-    if [ $needed_texi2html ]; then
-        bk clean Support/texi2html
-    fi
-
-    if [ $needed_texinfo_tex ]; then
-        bk clean Support/texinfo.tex
-    fi
-
-    if [ $needed_include_texi ]; then
-        rm -f include.texi
-    fi
-
-    for file in \
-        manual.aux manual.cp  manual.cps manual.dvi  \
-        manual.fn  manual.fns manual.ky  manual.html \
-        manual.pg  manual.toc manual.tp  manual.vr   \
-        mysql.info manual_toc.html                   ;
-    do
-        rm -f $file
-    done
-        
-}
-
-
-if [ -e Flags/usa.txt ]; then
-    echo "Good, Flags are there."
-else
-    echo -n "Checking out Flags..."
-    bk edit Flags >/dev/null 2>&1
-    echo " Done."
-    needed_flags=1
-fi
-
-if [ -e Support/texi2html ]; then
-    echo "Good, texi2html is there."
-else
-    echo -n "Checking out texi2html..."
-    bk edit Support/texi2html >/dev/null 2>&1
-    echo " Done."
-    needed_texi2html=1
-fi
-
-if [ -e Support/texinfo.tex ]; then
-    echo "Good, texinfo.tex is there."
-else
-    echo -n "Checking out texinfo.tex..."
-    bk edit Support/texinfo.tex >/dev/null 2>&1
-    echo " Done."
-    needed_texinfo_tex=1
-fi
-
-if [ -e include.texi ]; then
-    echo "Good, include.texi is there."
-else
-    echo -n "Creating include.texi..."
-    bk edit ../configure.in >/dev/null 2>&1
-    echo "@c This file was generated by test-make-manual" > include.texi
-    echo -n "@set mysql_version " >> include.texi
-    grep "AM_INIT_AUTOMAKE(mysql, " ../configure.in | \
-    sed -e 's;AM_INIT_AUTOMAKE(mysql, ;;' -e 's;);;' >> include.texi
-    echo -n "@set default_port " >> include.texi
-    grep "MYSQL_TCP_PORT_DEFAULT=" ../configure.in | \
-    sed -e 's;MYSQL_TCP_PORT_DEFAULT=;;' >> include.texi
-    echo " Done."
-    needed_include_texi=1
-fi
-
-echo -n "Running makeinfo..."
-makeinfo --no-split -I . manual.texi
-
-if [ $? != 0 ]; then
-    die "Manual has errors - fix before you commit"
-else
-    echo " Looks good."
-fi
-
-
-echo -n "Running texi2html..."
-/usr/bin/perl ./Support/texi2html -iso -number manual.texi
-
-if [ $? != 0 ]; then
-    die "Manual has errors - fix before you commit"
-else
-    echo " Looks good."
-fi
-
-
-echo -n "Running texi2dvi..."
-texi2dvi --batch manual.texi > texi2dvi.out
-
-if [ $? != 0 ]; then
-    die "Manual has errors - fix before you commit (saved in texi2dvi.out)"
-else
-    rm texi2dvi.out
-    echo " Looks good."
-fi
-
-echo
-echo
-echo "Please examine your modifications in \`manual.html'."
-echo
-echo "If you would like to use a different browser, set the 'BROWSER' environment"
-echo "variable." 
-echo
-
-$BROWSER file:`pwd`/manual_toc.html
-
-echo "-- Press Enter to Continue --"
-read junk
-cleanup

Docs/Support/test-make-manual-de

-#!/bin/sh
-
-needed_flags=0
-needed_texi2html=0
-needed_texinfo_tex=0
-needed_include_texi=0
-
-if [ -z $BROWSER ]; then
-    BROWSER=netscape 
-    echo "BROWSER not set, using $BROWSER"
-fi
-
-die ()
-{
-    echo
-    echo $1
-    cleanup
-    exit 1
-}
-
-cleanup ()
-{
-    echo "Cleaning up..."
-    if [ $needed_flags ]; then
-        bk clean Flags
-    fi
-
-    if [ $needed_texi2html ]; then
-        bk clean Support/texi2html
-    fi
-
-    if [ $needed_texinfo_tex ]; then
-        bk clean Support/texinfo.tex
-    fi
-
-    if [ $needed_include_texi ]; then
-        rm -f include.texi
-    fi
-
-    for file in \
-        manual.de.aux manual.de.cp  manual.de.cps manual.de.dvi  \
-        manual.de.fn  manual.de.fns manual.de.ky  manual.de.html \
-        manual.de.pg  manual.de.toc manual.de.tp  manual.de.vr   \
-        mysql.de.info manual.de_toc.html                   ;
-    do
-        rm -f $file
-    done
-        
-}
-
-
-if [ -e Flags/usa.txt ]; then
-    echo "Good, Flags are there."
-else
-    echo -n "Checking out Flags..."
-    bk edit Flags >/dev/null 2>&1
-    echo " Done."
-    needed_flags=1
-fi
-
-if [ -e Support/texi2html ]; then
-    echo "Good, texi2html is there."
-else
-    echo -n "Checking out texi2html..."
-    bk edit Support/texi2html >/dev/null 2>&1
-    echo " Done."
-    needed_texi2html=1
-fi
-
-if [ -e Support/texinfo.tex ]; then
-    echo "Good, texinfo.tex is there."
-else
-    echo -n "Checking out texinfo.tex..."
-    bk edit Support/texinfo.tex >/dev/null 2>&1
-    echo " Done."
-    needed_texinfo_tex=1
-fi
-
-if [ -e include.texi ]; then
-    echo "Good, include.texi is there."
-else
-    echo -n "Creating include.texi..."
-    bk edit ../configure.in >/dev/null 2>&1
-    echo "@c This file was generated by test-make-manual" > include.texi
-    echo -n "@set mysql_version " >> include.texi
-    grep "AM_INIT_AUTOMAKE(mysql, " ../configure.in | \
-    sed -e 's;AM_INIT_AUTOMAKE(mysql, ;;' -e 's;);;' >> include.texi
-    echo -n "@set default_port " >> include.texi
-    grep "MYSQL_TCP_PORT_DEFAULT=" ../configure.in | \
-    sed -e 's;MYSQL_TCP_PORT_DEFAULT=;;' >> include.texi
-    echo " Done."
-    needed_include_texi=1
-fi
-
-echo -n "Running makeinfo..."
-makeinfo --no-split -I . manual.de.texi
-
-if [ $? != 0 ]; then
-    die "Manual has errors - fix before you commit"
-else
-    echo " Looks good."
-fi
-
-
-echo -n "Running texi2html..."
-/usr/bin/perl ./Support/texi2html -iso -number manual.de.texi
-
-if [ $? != 0 ]; then
-    die "Manual has errors - fix before you commit"
-else
-    echo " Looks good."
-fi
-
-
-echo -n "Running texi2dvi..."
-texi2dvi --batch manual.de.texi > texi2dvi.out
-
-if [ $? != 0 ]; then
-    die "Manual has errors - fix before you commit (saved in texi2dvi.out)"
-else
-    rm texi2dvi.out
-    echo " Looks good."
-fi
-
-echo
-echo
-echo "Please examine your modifications in \`manual.de.html'."
-echo
-echo "If you would like to use a different browser, set the 'BROWSER' environment"
-echo "variable." 
-echo
-
-$BROWSER file:`pwd`/manual.de_toc.html
-
-echo "-- Press Enter to Continue --"
-read junk
-cleanup

Docs/Support/trivial-makeinfo-4.0c.patch

---- alt-multi.c	Sun Apr 14 10:03:19 2002
-+++ multi.c	Tue May 22 20:52:33 2001
-@@ -287,7 +287,7 @@
-                  && *params != '\n' && *params != '@')
-             params++;
-           setup_output_environment (i,
--                     (int) ((columnfrac * 100.00) + 0.49));
-+                     (int) (columnfrac * (fill_column - current_indent) + .5));
-         }
-       }
- 

Docs/Support/xwf

-#!/usr/bin/perl -w
-#
-# Parse document and report first syntax (well-formedness) error found.
-#
-
-use strict;
-use XML::Parser;
-use Getopt::Std;
-
-my %opts;
-getopts('e', \%opts);
-my $ENTREFS = exists( $opts{'e'} );                 # flag: check ent refs
-
-my $parser = XML::Parser->new( 
-                               ErrorContext => 2,   # output error context
-                               );
-
-# get input from files
-if( @ARGV ) {
-    foreach( @ARGV ) {
-        my $file = $_;
-        unless( -r $file ) {
-            print STDERR "ERROR: Can't open '$file'.\n";
-            return;
-        }
-        my $input = '';
-        open( F, $file );
-        while( <F> ) { $input .= $_; }
-        close F;
-
-        # parse and report errors
-        if( &parse_string( $input )) {
-            print STDERR "ERROR in $file:\n$@\n";
-        } else {
-            print STDERR "'$file' is well-formed.\n";
-        }
-    }
-    print "All files checked.\n";
-
-# get input from STDIN
-} else {
-    my $input = "";
-    while( <STDIN> ) { $input .= $_; }
-    if( &parse_string( $input )) {
-        print STDERR "ERROR in stream:\n$@\n";
-    } else {
-        print STDERR "No syntax errors found in XML stream.\n";
-    }
-}
-
-
-# parse the string and return error message
-#
-# NOTE: By default, entity refs are not expanded.  XML::Parser can be
-# told not to expand entity refs, but will still try to find
-# replacement text just in case, which we don't want.  Therefore, we
-# need to do a stupid regexp replacement, removing entities from input.
-#
-sub parse_string {
-    my $string = shift;
-    unless( $ENTREFS ) {
-        $string =~ s/\&[^\s;]+;//g;         # remove entity references
-    }
-    eval { $parser->parse( $string ); };
-    $@ =~ s/at \/.*?$//s;               # remove module line number
-    return $@;
-}

Docs/bk.txt

-Mail by sasha, should be rewritten as a HOWTO sometimes
-vva added point C) for Windows-project
------------
-
-I have set up a repository with BitKeeper on work. There are still some things
-about it that I would like to learn, but I have gotten far enough with it to
-replace CVS functionality were are currently using, so let's just go ahead and
-get started on it. Please follow the instructions below (make sure to save the
-message for future reference):
-
-a) http://www.bitmover.com/download
-        user: beta
-        password: get bitkeeper
-
-  get the version appropriate for your platform - download it to a temp
-directory, chmod +x  and then run it. You will have to tell it which directory
-to install, for consistency, let's use /usr/local/bin
-
-b) we will take advantage of bk capablity of working with master/slave
-repositories. The master will be on work.mysql.com, the slaves will be our
-individual machines. The master repository has already been set up on work, so
-you will need just to set up a slave repository on your machine:
-
-  mkdir bk
-  cd bk
-  bk clone yourusername@work:/home/bk/mysql mysql
-  cd mysql
-  bk -r edit
-
-Now you have the entire source tree in the current directory. Let's compile it:
-
- BUILD/compile-pentium-debug
- 
-C) Windows project. 
-   - Compile Linux-project (see points above)
-   - run VC++Files/prepare
-   - make repository accessible for Windows (using samba)
-   - open VC++Files/mysql.dsw in Microsoft Visual Stidio (5.0 or above)
-
-After you edit a file, you need to check it in using bk citool or bk ci
-filename. Note that ci is different than commit - you ci a file, but you commit
-a change set. This is a very nice concept - instead of thinking of each
-individual file as CVS does, bk groups the changes you are making and allows you
-to document what you actually did between the commits as a whole, rather than
-just commenting on every file. When you commit, bk will ask you to comment on
-the change set.
-
-Commit is done just to your local repository. To make your changes global, you
-will need to run bk push. Be careful with that - it is a good idea to run bk
-push -l -n first too see what you are just about to push to the master
-repository.
-
-When somebody does a push, you will be getting a email ( I will set this up to
-day). You will then need to execute bk pull to update your sources. If there are
-any conflicts, bk will force you to resolve them by asking you questions on what
-to do with each conflict.
-
-To learn more about bk, use bk helptool - I will be doing this a lot in the next
-couple of days :-) If you find bugs or have questions/feature
-suggestions/comments for developers, feel free to e-mail dev@bitmover.com .
-Their developers, and especially the president of the company Larry McVoy really
-like MySQL and are very anxious to help us. Make sure it is obvious that you
-work for MySQL, of course. And, of course, do not bug them with little things
-that you can figure out on your own or with my help - they were nice to offer us
-support, but we should not abuse it.
\ No newline at end of file

Docs/internals.texi

-\input texinfo  @c -*-texinfo-*-
-@c
-@c *********************************************************
-@c
-@c This is a dummy placeholder file for internals.texi in the
-@c MySQL source trees.
-@c
-@c Note, that the internals documentation has been moved into a separate
-@c BitKeeper source tree named "mysqldoc" - do not attempt to edit this
-@c file! All changes to internals.texi should be done in the mysqldoc tree.
-@c
-@c See http://www.mysql.com/doc/en/Installing_source_tree.html
-@c for information about how to work with BitKeeper source trees.
-@c
-@c This dummy file is being replaced with the actual file from the
-@c mysqldoc tree when building the official source distribution.
-@c
-@c Please e-mail docs@mysql.com for more information or if
-@c you are interested in doing a translation.
-@c
-@c *********************************************************
-@c
-@c %**start of header
-
-@setfilename internals.info
-
-@c We want the types in the same index
-@syncodeindex tp fn
-
-@ifclear tex-debug
-@c This removes the black squares in the right margin
-@finalout
-@end ifclear
-
-@c Set background for HTML
-@set _body_tags BGCOLOR=silver TEXT=#000000 LINK=#101090 VLINK=#7030B0
-@c Set some style elements for the manual in HTML form. 'suggested'
-@c natural language colors: aqua, black, blue, fuchsia, gray, green,
-@c lime, maroon, navy, olive, purple, red, silver, teal, white, and
-@c yellow. From Steeve Buehler <ahr@YogElements.com>
-@set _extra_head <style> code {color:purple} tt {color:green} samp {color:navy} pre {color:maroon} </style>
-
-@settitle Dummy MySQL internals documentation for version @value{mysql_version}.
-
-@c We want single-sided heading format, with chapters on new pages. To
-@c get double-sided format change 'on' below to 'odd'
-@setchapternewpage on
-
-@paragraphindent 0
-
-@c %**end of header
-
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* mysql: (mysql).               MySQL documentation.
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-
-@titlepage
-@sp 10
-@center @titlefont{Empty placeholder for the MySQL Internals Documentation}
-@sp 10
-@center Copyright @copyright{} 1995-2003 MySQL AB
-@c blank page after title page makes page 1 be a page front.
-@c also makes the back of the title page blank.
-@page
-@end titlepage
-
-@c This should be added. The HTML conversion also needs a MySQL version
-@c number somewhere.
-
-@iftex
-@c change this to double if you want formatting for double-sided
-@c printing
-@headings single
-
-@oddheading @thischapter @| @| @thispage
-@evenheading @thispage @| @| MySQL Internal Reference for Version @value{mysql_version}
-
-@end iftex
-
-@node Top, (dir), (dir), (dir)
-
-@ifinfo
-This is an empty placeholder file for the MySQL internals documentation.
-
-The real version of this file is now maintained in a separate BitKeeper
-source tree!  Please see
-@url{http://www.mysql.com/doc/en/Installing_source_tree.html} for more info
-on how to work with BitKeeper.
-
-Please do not attempt to edit this file directly - use the one in the
-@code{mysqldoc} BK tree instead.
-
-This file will be replaced with the current @code{internals.texi} when
-building the official source distribution.
-@end ifinfo
-
-@bye

Docs/linuxthreads.txt

+[Note this information is obsolete]
+
 Notes on compiling glibc for the standard MySQL binary:
 
  - make sure you have gcc 2.95 and gmake 3.79 or newer