Bug#20028 (Function with select return no data)

This patch reverts a change introduced by Bug 6951, which incorrectly
set thd->abort_on_warning for stored procedures.

As per internal discussions about the SQL_MODE=TRADITIONAL,
the correct behavior is to *not* abort on warnings even inside an INSERT/UPDATE
trigger.

Tests for Stored Procedures, Stored Functions, Triggers involving SQL_MODE
have been included or revised, to reflect the intended behavior.

(reposting approved patch, to work around source control issues, no review needed)

mysql-test/include/sp-vars.inc

@@ -119,4 +119,13 @@ END|
 
 ---------------------------------------------------------------------------
 
+CREATE FUNCTION sp_vars_div_zero() RETURNS INTEGER
+BEGIN
+  DECLARE div_zero INTEGER;
+  SELECT 1/0 INTO div_zero;
+  RETURN div_zero;
+END|
+
+---------------------------------------------------------------------------
+
 delimiter ;|

mysql-test/r/sp-vars.result

@@ -4,6 +4,7 @@ DROP FUNCTION IF EXISTS sp_vars_check_ret1;
 DROP FUNCTION IF EXISTS sp_vars_check_ret2;
 DROP FUNCTION IF EXISTS sp_vars_check_ret3;
 DROP FUNCTION IF EXISTS sp_vars_check_ret4;
+DROP FUNCTION IF EXISTS sp_vars_div_zero;
 SET @@sql_mode = 'ansi';
 CREATE PROCEDURE sp_vars_check_dflt()
 BEGIN
@@ -88,6 +89,12 @@ CREATE FUNCTION sp_vars_check_ret4() RETURNS DECIMAL(64, 2)
 BEGIN
 RETURN 12 * 10 + 34 + 0.1234;
 END|
+CREATE FUNCTION sp_vars_div_zero() RETURNS INTEGER
+BEGIN
+DECLARE div_zero INTEGER;
+SELECT 1/0 INTO div_zero;
+RETURN div_zero;
+END|
 
 ---------------------------------------------------------------
 Calling the routines, created in ANSI mode.
@@ -172,6 +179,9 @@ sp_vars_check_ret4()
 154.12
 Warnings:
 Note	1265	Data truncated for column 'sp_vars_check_ret4()' at row 1
+SELECT sp_vars_div_zero();
+sp_vars_div_zero()
+NULL
 SET @@sql_mode = 'traditional';
 
 ---------------------------------------------------------------
@@ -257,12 +267,16 @@ sp_vars_check_ret4()
 154.12
 Warnings:
 Note	1265	Data truncated for column 'sp_vars_check_ret4()' at row 1
+SELECT sp_vars_div_zero();
+sp_vars_div_zero()
+NULL
 DROP PROCEDURE sp_vars_check_dflt;
 DROP PROCEDURE sp_vars_check_assignment;
 DROP FUNCTION sp_vars_check_ret1;
 DROP FUNCTION sp_vars_check_ret2;
 DROP FUNCTION sp_vars_check_ret3;
 DROP FUNCTION sp_vars_check_ret4;
+DROP FUNCTION sp_vars_div_zero;
 CREATE PROCEDURE sp_vars_check_dflt()
 BEGIN
 DECLARE v1 TINYINT DEFAULT 1e200;
@@ -346,6 +360,12 @@ CREATE FUNCTION sp_vars_check_ret4() RETURNS DECIMAL(64, 2)
 BEGIN
 RETURN 12 * 10 + 34 + 0.1234;
 END|
+CREATE FUNCTION sp_vars_div_zero() RETURNS INTEGER
+BEGIN
+DECLARE div_zero INTEGER;
+SELECT 1/0 INTO div_zero;
+RETURN div_zero;
+END|
 
 ---------------------------------------------------------------
 Calling the routines, created in TRADITIONAL mode.
@@ -366,6 +386,8 @@ sp_vars_check_ret4()
 154.12
 Warnings:
 Note	1265	Data truncated for column 'sp_vars_check_ret4()' at row 1
+SELECT sp_vars_div_zero();
+ERROR 22012: Division by 0
 SET @@sql_mode = 'ansi';
 DROP PROCEDURE sp_vars_check_dflt;
 DROP PROCEDURE sp_vars_check_assignment;
@@ -373,6 +395,7 @@ DROP FUNCTION sp_vars_check_ret1;
 DROP FUNCTION sp_vars_check_ret2;
 DROP FUNCTION sp_vars_check_ret3;
 DROP FUNCTION sp_vars_check_ret4;
+DROP FUNCTION sp_vars_div_zero;
 
 ---------------------------------------------------------------
 BIT data type tests

mysql-test/r/sp.result

@@ -5470,6 +5470,135 @@ CAD
 CHF
 DROP FUNCTION bug21493|
 DROP TABLE t3,t4|
+drop function if exists func_20028_a|
+drop function if exists func_20028_b|
+drop function if exists func_20028_c|
+drop procedure if exists proc_20028_a|
+drop procedure if exists proc_20028_b|
+drop procedure if exists proc_20028_c|
+drop table if exists table_20028|
+create table table_20028 (i int)|
+SET @save_sql_mode=@@sql_mode|
+SET sql_mode=''|
+create function func_20028_a() returns integer
+begin
+declare temp integer;
+select i into temp from table_20028 limit 1;
+return ifnull(temp, 0);
+end|
+create function func_20028_b() returns integer
+begin
+return func_20028_a();
+end|
+create function func_20028_c() returns integer
+begin
+declare div_zero integer;
+set SQL_MODE='TRADITIONAL';
+select 1/0 into div_zero;
+return div_zero;
+end|
+create procedure proc_20028_a()
+begin
+declare temp integer;
+select i into temp from table_20028 limit 1;
+end|
+create procedure proc_20028_b()
+begin
+call proc_20028_a();
+end|
+create procedure proc_20028_c()
+begin
+declare div_zero integer;
+set SQL_MODE='TRADITIONAL';
+select 1/0 into div_zero;
+end|
+select func_20028_a()|
+func_20028_a()
+0
+Warnings:
+Warning	1329	No data - zero rows fetched, selected, or processed
+select func_20028_b()|
+func_20028_b()
+0
+Warnings:
+Warning	1329	No data - zero rows fetched, selected, or processed
+select func_20028_c()|
+ERROR 22012: Division by 0
+call proc_20028_a()|
+Warnings:
+Warning	1329	No data - zero rows fetched, selected, or processed
+call proc_20028_b()|
+Warnings:
+Warning	1329	No data - zero rows fetched, selected, or processed
+call proc_20028_c()|
+ERROR 22012: Division by 0
+SET sql_mode='TRADITIONAL'|
+drop function func_20028_a|
+drop function func_20028_b|
+drop function func_20028_c|
+drop procedure proc_20028_a|
+drop procedure proc_20028_b|
+drop procedure proc_20028_c|
+create function func_20028_a() returns integer
+begin
+declare temp integer;
+select i into temp from table_20028 limit 1;
+return ifnull(temp, 0);
+end|
+create function func_20028_b() returns integer
+begin
+return func_20028_a();
+end|
+create function func_20028_c() returns integer
+begin
+declare div_zero integer;
+set SQL_MODE='';
+select 1/0 into div_zero;
+return div_zero;
+end|
+create procedure proc_20028_a()
+begin
+declare temp integer;
+select i into temp from table_20028 limit 1;
+end|
+create procedure proc_20028_b()
+begin
+call proc_20028_a();
+end|
+create procedure proc_20028_c()
+begin
+declare div_zero integer;
+set SQL_MODE='';
+select 1/0 into div_zero;
+end|
+select func_20028_a()|
+func_20028_a()
+0
+Warnings:
+Warning	1329	No data - zero rows fetched, selected, or processed
+select func_20028_b()|
+func_20028_b()
+0
+Warnings:
+Warning	1329	No data - zero rows fetched, selected, or processed
+select func_20028_c()|
+func_20028_c()
+NULL
+call proc_20028_a()|
+Warnings:
+Warning	1329	No data - zero rows fetched, selected, or processed
+call proc_20028_b()|
+Warnings:
+Warning	1329	No data - zero rows fetched, selected, or processed
+call proc_20028_c()|
+SET @@sql_mode=@save_sql_mode|
+drop function func_20028_a|
+drop function func_20028_b|
+drop function func_20028_c|
+drop procedure proc_20028_a|
+drop procedure proc_20028_b|
+drop procedure proc_20028_c|
+drop table table_20028|
 drop procedure if exists proc_21462_a|
 drop procedure if exists proc_21462_b|
 create procedure proc_21462_a()

mysql-test/r/trigger.result

@@ -1073,10 +1073,11 @@ SELECT @x;
 NULL
 SET @x=2;
 UPDATE t1 SET i1 = @x;
-ERROR 22012: Division by 0
+Warnings:
+Error	1365	Division by 0
 SELECT @x;
 @x
-2
+NULL
 SET SQL_MODE='';
 SET @x=3;
 INSERT INTO t1 VALUES (@x);
@@ -1085,10 +1086,12 @@ SELECT @x;
 NULL
 SET @x=4;
 UPDATE t1 SET i1 = @x;
-ERROR 22012: Division by 0
+Warnings:
+Error	1365	Division by 0
+Error	1365	Division by 0
 SELECT @x;
 @x
-4
+NULL
 SET @@sql_mode=@save_sql_mode;
 DROP TRIGGER t1_ai;
 DROP TRIGGER t1_au;
@@ -1174,6 +1177,59 @@ ERROR HY000: String '1234567890abcdefghij1234567890abcdefghij1234567890abcdefghi
 DROP TABLE t1;
 DROP TABLE t2;
 drop table if exists t1;
+drop table if exists t2;
+drop table if exists t3;
+drop table if exists t4;
+SET @save_sql_mode=@@sql_mode;
+SET sql_mode='TRADITIONAL'|
+create table t1 (id int(10) not null primary key, v int(10) )|
+create table t2 (id int(10) not null primary key, v int(10) )|
+create table t3 (id int(10) not null primary key, v int(10) )|
+create table t4 (c int)|
+create trigger t4_bi before insert on t4 for each row set @t4_bi_called:=1|
+create trigger t4_bu before update on t4 for each row set @t4_bu_called:=1|
+insert into t1 values(10, 10)|
+set @a:=1/0|
+Warnings:
+Error	1365	Division by 0
+select 1/0 from t1|
+1/0
+NULL
+Warnings:
+Error	1365	Division by 0
+create trigger t1_bi before insert on t1 for each row set @a:=1/0|
+insert into t1 values(20, 20)|
+Warnings:
+Error	1365	Division by 0
+drop trigger t1_bi|
+create trigger t1_bi before insert on t1 for each row
+begin
+insert into t2 values (new.id, new.v);
+update t2 set v=v+1 where id= new.id;
+replace t3 values (new.id, 0);
+update t2, t3 set t2.v=new.v, t3.v=new.v where t2.id=t3.id;
+create temporary table t5 select * from t1;
+delete from t5;
+insert into t5 select * from t1;
+insert into t4 values (0);
+set @check= (select count(*) from t5);
+update t4 set c= @check;
+drop temporary table t5;
+set @a:=1/0;
+end|
+set @check=0, @t4_bi_called=0, @t4_bu_called=0|
+insert into t1 values(30, 30)|
+Warnings:
+Error	1365	Division by 0
+select @check, @t4_bi_called, @t4_bu_called|
+@check	@t4_bi_called	@t4_bu_called
+2	1	1
+SET @@sql_mode=@save_sql_mode;
+drop table t1;
+drop table t2;
+drop table t3;
+drop table t4;
+drop table if exists t1;
 create table t1 (i int, j int key);
 insert into t1 values (1,1), (2,2), (3,3);
 create trigger t1_bu before update on t1 for each row

mysql-test/t/sp-vars.test

@@ -15,6 +15,7 @@ DROP FUNCTION IF EXISTS sp_vars_check_ret1;
 DROP FUNCTION IF EXISTS sp_vars_check_ret2;
 DROP FUNCTION IF EXISTS sp_vars_check_ret3;
 DROP FUNCTION IF EXISTS sp_vars_check_ret4;
+DROP FUNCTION IF EXISTS sp_vars_div_zero;
 
 --enable_warnings
 
@@ -49,6 +50,8 @@ SELECT sp_vars_check_ret3();
 
 SELECT sp_vars_check_ret4();
 
+SELECT sp_vars_div_zero();
+
 # Check that changing sql_mode after creating a store procedure does not
 # matter.
 
@@ -72,6 +75,8 @@ SELECT sp_vars_check_ret3();
 
 SELECT sp_vars_check_ret4();
 
+SELECT sp_vars_div_zero();
+
 # Create the procedure in TRADITIONAL mode. Check that error will be thrown on
 # execution.
 
@@ -81,6 +86,7 @@ DROP FUNCTION sp_vars_check_ret1;
 DROP FUNCTION sp_vars_check_ret2;
 DROP FUNCTION sp_vars_check_ret3;
 DROP FUNCTION sp_vars_check_ret4;
+DROP FUNCTION sp_vars_div_zero;
 
 --source include/sp-vars.inc
 
@@ -110,6 +116,9 @@ SELECT sp_vars_check_ret3();
 
 SELECT sp_vars_check_ret4();
 
+--error ER_DIVISION_BY_ZERO
+SELECT sp_vars_div_zero();
+
 SET @@sql_mode = 'ansi';
 
 #
@@ -122,6 +131,7 @@ DROP FUNCTION sp_vars_check_ret1;
 DROP FUNCTION sp_vars_check_ret2;
 DROP FUNCTION sp_vars_check_ret3;
 DROP FUNCTION sp_vars_check_ret4;
+DROP FUNCTION sp_vars_div_zero;
 
 ###########################################################################
 #

mysql-test/t/sp.test

@@ -6420,6 +6420,137 @@ SELECT bug21493(Member_ID) FROM t3|
 DROP FUNCTION bug21493|
 DROP TABLE t3,t4|
 
+#
+# Bug#20028 Function with select return no data
+#
+
+--disable_warnings
+drop function if exists func_20028_a|
+drop function if exists func_20028_b|
+drop function if exists func_20028_c|
+drop procedure if exists proc_20028_a|
+drop procedure if exists proc_20028_b|
+drop procedure if exists proc_20028_c|
+drop table if exists table_20028|
+--enable_warnings
+
+create table table_20028 (i int)|
+
+SET @save_sql_mode=@@sql_mode|
+
+SET sql_mode=''|
+
+create function func_20028_a() returns integer
+begin
+  declare temp integer;
+  select i into temp from table_20028 limit 1;
+  return ifnull(temp, 0);
+end|
+
+create function func_20028_b() returns integer
+begin
+  return func_20028_a();
+end|
+
+create function func_20028_c() returns integer
+begin
+  declare div_zero integer;
+  set SQL_MODE='TRADITIONAL';
+  select 1/0 into div_zero;
+  return div_zero;
+end|
+
+create procedure proc_20028_a()
+begin
+  declare temp integer;
+  select i into temp from table_20028 limit 1;
+end|
+
+create procedure proc_20028_b()
+begin
+  call proc_20028_a();
+end|
+
+create procedure proc_20028_c()
+begin
+  declare div_zero integer;
+  set SQL_MODE='TRADITIONAL';
+  select 1/0 into div_zero;
+end|
+
+select func_20028_a()|
+select func_20028_b()|
+--error ER_DIVISION_BY_ZERO
+select func_20028_c()|
+call proc_20028_a()|
+call proc_20028_b()|
+--error ER_DIVISION_BY_ZERO
+call proc_20028_c()|
+
+SET sql_mode='TRADITIONAL'|
+
+drop function func_20028_a|
+drop function func_20028_b|
+drop function func_20028_c|
+drop procedure proc_20028_a|
+drop procedure proc_20028_b|
+drop procedure proc_20028_c|
+
+create function func_20028_a() returns integer
+begin
+  declare temp integer;
+  select i into temp from table_20028 limit 1;
+  return ifnull(temp, 0);
+end|
+
+create function func_20028_b() returns integer
+begin
+  return func_20028_a();
+end|
+
+create function func_20028_c() returns integer
+begin
+  declare div_zero integer;
+  set SQL_MODE='';
+  select 1/0 into div_zero;
+  return div_zero;
+end|
+
+create procedure proc_20028_a()
+begin
+  declare temp integer;
+  select i into temp from table_20028 limit 1;
+end|
+
+create procedure proc_20028_b()
+begin
+  call proc_20028_a();
+end|
+
+create procedure proc_20028_c()
+begin
+  declare div_zero integer;
+  set SQL_MODE='';
+  select 1/0 into div_zero;
+end|
+
+select func_20028_a()|
+select func_20028_b()|
+select func_20028_c()|
+call proc_20028_a()|
+call proc_20028_b()|
+call proc_20028_c()|
+
+SET @@sql_mode=@save_sql_mode|
+
+drop function func_20028_a|
+drop function func_20028_b|
+drop function func_20028_c|
+drop procedure proc_20028_a|
+drop procedure proc_20028_b|
+drop procedure proc_20028_c|
+drop table table_20028|
+
 #
 # Bug#21462 Stored procedures with no arguments require parenthesis
 #

mysql-test/t/trigger.test

@@ -1274,7 +1274,6 @@ INSERT INTO t1 VALUES (@x);
 SELECT @x;
 
 SET @x=2;
---error ER_DIVISION_BY_ZERO
 UPDATE t1 SET i1 = @x;
 SELECT @x;
 
@@ -1285,7 +1284,6 @@ INSERT INTO t1 VALUES (@x);
 SELECT @x;
 
 SET @x=4;
---error ER_DIVISION_BY_ZERO
 UPDATE t1 SET i1 = @x;
 SELECT @x;
 
@@ -1420,6 +1418,67 @@ CREATE DEFINER=some_user_name@1234567890abcdefghij1234567890abcdefghij1234567890
 DROP TABLE t1;
 DROP TABLE t2;
 
+#
+# Bug#20028 Function with select return no data
+# 
+
+--disable_warnings
+drop table if exists t1;
+drop table if exists t2;
+drop table if exists t3;
+drop table if exists t4;
+--enable_warnings
+
+SET @save_sql_mode=@@sql_mode;
+
+delimiter |;
+SET sql_mode='TRADITIONAL'|
+create table t1 (id int(10) not null primary key, v int(10) )|
+create table t2 (id int(10) not null primary key, v int(10) )|
+create table t3 (id int(10) not null primary key, v int(10) )|
+create table t4 (c int)|
+
+create trigger t4_bi before insert on t4 for each row set @t4_bi_called:=1|
+create trigger t4_bu before update on t4 for each row set @t4_bu_called:=1|
+
+insert into t1 values(10, 10)|
+set @a:=1/0|
+select 1/0 from t1|
+
+create trigger t1_bi before insert on t1 for each row set @a:=1/0|
+
+insert into t1 values(20, 20)|
+
+drop trigger t1_bi|
+create trigger t1_bi before insert on t1 for each row
+begin
+  insert into t2 values (new.id, new.v);
+  update t2 set v=v+1 where id= new.id;
+  replace t3 values (new.id, 0);
+  update t2, t3 set t2.v=new.v, t3.v=new.v where t2.id=t3.id;
+  create temporary table t5 select * from t1;
+  delete from t5;
+  insert into t5 select * from t1;
+  insert into t4 values (0);
+  set @check= (select count(*) from t5);
+  update t4 set c= @check;
+  drop temporary table t5;
+
+  set @a:=1/0;
+end|
+
+set @check=0, @t4_bi_called=0, @t4_bu_called=0|
+insert into t1 values(30, 30)|
+select @check, @t4_bi_called, @t4_bu_called|
+
+delimiter ;|
+
+SET @@sql_mode=@save_sql_mode;
+
+drop table t1;
+drop table t2;
+drop table t3;
+drop table t4;
 
 #
 # Bug#20670 "UPDATE using key and invoking trigger that modifies

sql/sp_head.cc

@@ -991,8 +991,7 @@ sp_head::execute(THD *thd)
   save_sql_mode= thd->variables.sql_mode;
   thd->variables.sql_mode= m_sql_mode;
   save_abort_on_warning= thd->abort_on_warning;
-  thd->abort_on_warning=
-    (m_sql_mode & (MODE_STRICT_TRANS_TABLES | MODE_STRICT_ALL_TABLES));
+  thd->abort_on_warning= 0;
 
   /*
     It is also more efficient to save/restore current thd->lex once when