Skip to content

M
mariadb
Commit ea757126 authored by jcole@tetra.spaceapes.com's avatar jcole@tetra.spaceapes.com
Browse files
Options

Merge work.mysql.com:/home/bk/mysql 

into tetra.spaceapes.com:/usr/home/jcole/bk/mysql
parents 552561e2 9adb3ebe
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 357 additions and 129 deletions
BUILD/FINISH.sh
View file @ ea757126
cflags="$c_warnings $extra_flags" cflags="$c_warnings $extra_flags"
cxxflags="$cxx_warnings $base_cxxflags $extra_flags" cxxflags="$cxx_warnings $base_cxxflags $extra_flags"
configure="./configure $base_configs $extra_configs" configure="./configure $base_configs $extra_configs"
for arg in "$@"; do for arg
configure="$configure "`echo "$arg" | sed -e 's,\([^a-zA-Z0-9_.-]\),\\\\\1,g'` do
# Escape special characters so they don't confuse eval
configure="$configure "`echo "$arg" | \
sed -e 's,\([^a-zA-Z0-9_.=-]\),\\\\\1,g'`
done done
commands="\
$make -k clean || true
/bin/rm -f */.deps/*.P config.cache
eval "CFLAGS='$cflags' CXX=gcc CXXFLAGS='$cxxflags' $configure" aclocal; autoheader; aclocal; automake; autoconf
if [ "x$do_make" = "xno" ] ; then CFLAGS=\"$cflags\" CXX=gcc CXXFLAGS=\"$cxxflags\" $configure
exit 0
fi $make $AM_MAKEFLAGS"
if [ "x$strip" = "xyes" ]
then
commands="$commands
$make $AM_MAKEFLAGS mkdir tmp
if [ "x$strip" = "xyes" ]; then nm --numeric-sort sql/mysqld > tmp/mysqld.sym
mkdir -p tmp objdump -d sql/mysqld > tmp/mysqld.S
nm --numeric-sort sql/mysqld > tmp/mysqld.sym strip sql/mysqld"
objdump -d sql/mysqld > tmp/mysqld.S
strip sql/mysqld
fi fi
if test -z "$nonono"
then
eval "set -x; $commands"
else
echo "$commands"
fi
BUILD/SETUP.sh
View file @ ea757126
if ! test -f sql/mysqld.cc; then if ! test -f sql/mysqld.cc
then
echo "You must run this script from the MySQL top-level directory" echo "You must run this script from the MySQL top-level directory"
exit 1 exit 1
fi fi
set -e # exit on error nonono=
case "$1" in
-n | --just-print ) nonono=1; shift ;;
-h | --help ) cat <<EOF; exit 0 ;;
Usage: $0 [-h|-n] [configure-options]
-h, --help Show this help message.
-n, --just-print Don't actually run any commands; just print them.
export AM_MAKEFLAGS="-j 4" # XXX: auto-make uses this variable - export it??? Any other options will be passed directly to configure.
Note: this script is intended for internal use by MySQL developers.
EOF
esac
set -e
export AM_MAKEFLAGS
AM_MAKEFLAGS="-j 4"
# If you are not using codefusion add "-Wpointer-arith" to WARNINGS # If you are not using codefusion add "-Wpointer-arith" to WARNINGS
# The following warning flag will give too many warnings: # The following warning flag will give too many warnings:
...@@ -16,7 +32,7 @@ debug_extra_warnings="-Wuninitialized" ...@@ -16,7 +32,7 @@ debug_extra_warnings="-Wuninitialized"
c_warnings="$global_warnings -Wunused" c_warnings="$global_warnings -Wunused"
cxx_warnings="$global_warnings -Woverloaded-virtual -Wextern-inline -Wsign-promo -Wreorder -Wctor-dtor-privacy -Wnon-virtual-dtor" cxx_warnings="$global_warnings -Woverloaded-virtual -Wextern-inline -Wsign-promo -Wreorder -Wctor-dtor-privacy -Wnon-virtual-dtor"
alpha_cflags="-mcpu=ev6 -Wa,-mev6" # not used yet alpha_cflags="-mcpu=ev6 -Wa,-mev6" # Not used yet
pentium_cflags="-mpentiumpro" pentium_cflags="-mpentiumpro"
sparc_cflags="" sparc_cflags=""
...@@ -27,19 +43,15 @@ debug_cflags="-DEXTRA_DEBUG -DFORCE_INIT_OF_VARS -DSAFEMALLOC -DSAFE_MUTEX -O2" ...@@ -27,19 +43,15 @@ debug_cflags="-DEXTRA_DEBUG -DFORCE_INIT_OF_VARS -DSAFEMALLOC -DSAFE_MUTEX -O2"
base_cxxflags="-felide-constructors -fno-exceptions -fno-rtti" base_cxxflags="-felide-constructors -fno-exceptions -fno-rtti"
base_configs="--prefix=/usr/local/mysql --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-mysqld-ldflags=-all-static" base_configs="--prefix=/usr/local/mysql --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-mysqld-ldflags=-all-static"
alpha_configs="" # not used yet alpha_configs="" # Not used yet
pentium_configs="" pentium_configs=""
sparc_configs="" sparc_configs=""
debug_configs="--with-debug" debug_configs="--with-debug"
if gmake --version > /dev/null 2>&1; then if gmake --version > /dev/null 2>&1
then
make=gmake make=gmake
else else
make=make make=make
fi fi
$make -k clean || true
/bin/rm -f */.deps/*.P config.cache
aclocal; autoheader; aclocal; automake; autoconf
BitKeeper/etc/logging_ok
View file @ ea757126
...@@ -9,3 +9,4 @@ serg@donna.mysql.com ...@@ -9,3 +9,4 @@ serg@donna.mysql.com
serg@serg.mysql.com serg@serg.mysql.com
tim@cane.mysql.fi tim@cane.mysql.fi
tim@work.mysql.com tim@work.mysql.com
tim@threads.polyesthetic.msg
Docs/manual.texi
View file @ ea757126
...@@ -9952,7 +9952,7 @@ for this is that negative numbers caused problems when wrapping from -1 to 0. ...@@ -9952,7 +9952,7 @@ for this is that negative numbers caused problems when wrapping from -1 to 0.
@code{AUTO_INCREMENT} is now for MyISAM tables handled at a lower level and @code{AUTO_INCREMENT} is now for MyISAM tables handled at a lower level and
is much faster than before. For MyISAM tables old numbers are also not reused is much faster than before. For MyISAM tables old numbers are also not reused
anymore, even if you delete some rows from the table. anymore, even if you delete some rows from the table.
@item @code{INNER}, @code{DELAYED}, @code{RIGHT}, @code{CASE}, @code{THEN}, @code{WHEN}, @code{ELSE}, @code{END} and @code{WHEN} are now reserved words. @item @code{CASE}, @code{DELAYED}, @code{ELSE}, @code{END}, @code{FULLTEXT}, @code{INNER}, @code{RIGHT}, @code{THEN} and @code{WHEN} are now reserved words.
@item @code{FLOAT(X)} is now a true floating-point type and not a value with @item @code{FLOAT(X)} is now a true floating-point type and not a value with
a fixed number of decimals. a fixed number of decimals.
@item When declaring @code{DECIMAL(length,dec)} the length argument no @item When declaring @code{DECIMAL(length,dec)} the length argument no
...@@ -15814,6 +15814,10 @@ mysql> SELECT CASE BINARY "B" when "a" then 1 when "b" then 2 END; ...@@ -15814,6 +15814,10 @@ mysql> SELECT CASE BINARY "B" when "a" then 1 when "b" then 2 END;
@end example @end example
@end table @end table
The type of the return value (@code{INTEGER}, @code{DOUBLE} or
@code{STRING}) is the same as the type of the first returned value (the
expression after the first @code{THEN}).
@findex mathematical functions @findex mathematical functions
@findex functions, mathematical @findex functions, mathematical
@node Mathematical functions, String functions, Control flow functions, Functions @node Mathematical functions, String functions, Control flow functions, Functions
...@@ -30619,11 +30623,11 @@ utility. @xref{Table types}. ...@@ -30619,11 +30623,11 @@ utility. @xref{Table types}.
In the following text we will talk about @code{myisamchk}, but everything In the following text we will talk about @code{myisamchk}, but everything
also applies to the old @code{isamchk}. also applies to the old @code{isamchk}.
You can use the @code{myisamchk} utility to get information about your database You can use the @code{myisamchk} utility to get information about your
tables, check and repair them, or optimize them. The following sections database tables, check and repair them, or optimize them. The following
describe how to invoke @code{myisamchk} (including a description of its sections describe how to invoke @code{myisamchk} (including a
options), how to set up a table maintenance schedule, and how to use description of its options), how to set up a table maintenance schedule,
@code{myisamchk} to perform its various functions. and how to use @code{myisamchk} to perform its various functions.
You can, in most cases, also use the command @code{OPTIMIZE TABLES} to You can, in most cases, also use the command @code{OPTIMIZE TABLES} to
optimize and repair tables, but this is not as fast or reliable (in case optimize and repair tables, but this is not as fast or reliable (in case
...@@ -30713,9 +30717,9 @@ the file or that has died without closing the file properly. ...@@ -30713,9 +30717,9 @@ the file or that has died without closing the file properly.
If you @code{mysqld} is running, you must force a sync/close of all If you @code{mysqld} is running, you must force a sync/close of all
tables with @code{FLUSH TABLES} and ensure that no one is using the tables with @code{FLUSH TABLES} and ensure that no one is using the
tables while you are running @code{myisamchk}. In MySQL Version 3.23 the easiest tables while you are running @code{myisamchk}. In @strong{MySQL} Version 3.23
way to avoid this problem is to use @code{CHECK TABLE} instead of the easiest way to avoid this problem is to use @code{CHECK TABLE}
@code{myisamchk} to check tables. instead of @code{myisamchk} to check tables.
@cindex options, @code{myisamchk} @cindex options, @code{myisamchk}
@cindex @code{myisamchk}, options @cindex @code{myisamchk}, options
...@@ -30740,9 +30744,30 @@ for myisamchk can be examined with @code{myisamchk --help}: ...@@ -30740,9 +30744,30 @@ for myisamchk can be examined with @code{myisamchk --help}:
@item decode_bits @tab 9 @item decode_bits @tab 9
@end multitable @end multitable
@code{key_buffer_size} is only used when you check the table with @code{-e} or @code{sort_buffer_size} is used when the keys are reparied by sorting
repair it with @code{-o}. keys, which is the normal case when you use @code{--recover}.
@code{sort_buffer_size} is used when you repair the table with @code{-r}.
@code{key_buffer_size} is used when you are checking the table with
@code{--extended-check} or when the keys are repaired by inserting key
row by row in to the table (like when doing normal inserts). Repairing
through the key buffer is used in the following cases:
@itemize @bullet
@item
If you use @code{--safe-recover}.
@item
If you are using a @code{FULLTEXT} index.
@item
If the temporary files needed to sort the keys would be more than twice
as big as when creating the key file directly. This is often the case
when you have big @code{CHAR}, @code{VARCHAR} or @code{TEXT} keys as the
sort needs to store the whole keys during sorting. If you have lots
of temporary space and you can force @code{myisamchk} to repair by sorting
you can use the @code{--sort-recover} option.
@end itemize
Reparing through the key buffer takes much less disk space than using
sorting, but is also much slower.
If you want a faster repair, set the above variables to about 1/4 of your If you want a faster repair, set the above variables to about 1/4 of your
available memory. You can set both variables to big values, as only one available memory. You can set both variables to big values, as only one
...@@ -30851,6 +30876,11 @@ space than @code{-r}. Normally one should always first repair with ...@@ -30851,6 +30876,11 @@ space than @code{-r}. Normally one should always first repair with
If you have lots of memory, you should increase the size of If you have lots of memory, you should increase the size of
@code{key_buffer_size}! @code{key_buffer_size}!
@item -n or --sort-recover
Force @code{myisamchk} to use sorting to resolve the keys even if the
temporary files should be very big. This will not have any effect if you have
fulltext keys in the table.
@item --character-sets-dir=... @item --character-sets-dir=...
Directory where character sets are stored. Directory where character sets are stored.
@item --set-character-set=name @item --set-character-set=name
...@@ -30933,8 +30963,9 @@ Space for the new index file that replaces the old one. The old ...@@ -30933,8 +30963,9 @@ Space for the new index file that replaces the old one. The old
index file is truncated at start, so one usually ignore this space. index file is truncated at start, so one usually ignore this space.
This space is needed on the same disk as the original index file! This space is needed on the same disk as the original index file!
@item @item
When using @code{--repair} (but not when using @code{--safe-repair}, you When using @code{--recover} or @code{--sort-recover}
will need space for a sort buffer for: (but not when using @code{--safe-recover}, you will need space for a
sort buffer for:
@code{(largest_key + row_pointer_length)*number_of_rows * 2}. @code{(largest_key + row_pointer_length)*number_of_rows * 2}.
You can check the length of the keys and the row_pointer_length with You can check the length of the keys and the row_pointer_length with
@code{myisamchk -dv table}. @code{myisamchk -dv table}.
...@@ -30943,7 +30974,7 @@ This space is allocated on the temporary disk (specified by @code{TMPDIR} or ...@@ -30943,7 +30974,7 @@ This space is allocated on the temporary disk (specified by @code{TMPDIR} or
@end itemize @end itemize
If you have a problem with disk space during repair, you can try to use If you have a problem with disk space during repair, you can try to use
@code{--safe-repair} instead of @code{--repair}. @code{--safe-recover} instead of @code{--recover}.
@cindex maintaining, tables @cindex maintaining, tables
@cindex tables, maintenance regimen @cindex tables, maintenance regimen
...@@ -39486,6 +39517,8 @@ javascript, 2d/3d graphics, and PHP3/MySQL. All pages are generated from ...@@ -39486,6 +39517,8 @@ javascript, 2d/3d graphics, and PHP3/MySQL. All pages are generated from
a database. a database.
@c Added 990614; EMAIL: downey@image.dk (Rune Madsen) @c Added 990614; EMAIL: downey@image.dk (Rune Madsen)
@item @uref{http://www.softwarezrus.com/, Softwarezrus.com}
Ecommerce site that is selling computers.
@end itemize @end itemize
@cindex consultants, list of @cindex consultants, list of
...@@ -39782,6 +39815,10 @@ OLEDB handler for @code{MySQL}. By SWsoft. ...@@ -39782,6 +39815,10 @@ OLEDB handler for @code{MySQL}. By SWsoft.
Examples and documentation for MyOLEDB. By SWsoft. Examples and documentation for MyOLEDB. By SWsoft.
@item @uref{http://www.mysql.com/Downloads/Win32/Myoledb.zip, Myoledb.zip} @item @uref{http://www.mysql.com/Downloads/Win32/Myoledb.zip, Myoledb.zip}
Source for MyOLEDB. By SWsoft. Source for MyOLEDB. By SWsoft.
@item @uref{http://www.mysql.com/Downloads/Win32/MyOLEDB.chm, MyOLEDB.chm}
Help files for MyOLEDB.
@item @uref{http://www.mysql.com/Downloads/Win32/libmyodbc.zip, libmyodbc.zip}
Static MyODBC library used for build MyOLEDB. Based on MyODBC code.
@end itemize @end itemize
@cindex C++ @cindex C++
...@@ -40950,6 +40987,13 @@ not yet 100 % confident in this code. ...@@ -40950,6 +40987,13 @@ not yet 100 % confident in this code.
@appendixsubsec Changes in release 3.23.33 @appendixsubsec Changes in release 3.23.33
@itemize bullet @itemize bullet
@item @item
Fixed 'no found rows' bug in @code{MyISAM} tables when a @code{BLOB} was
first part of a multi-part key.
@item
Fixed bug where @code{CASE} didn't work with @code{GROUP BY}.
@item
Added option @code{--sort-recover} to @code{myisamchk}.
@item
@code{myisamchk -S} and @code{OPTIMIZE TABLE} now works on Windows. @code{myisamchk -S} and @code{OPTIMIZE TABLE} now works on Windows.
@item @item
Fixed bug when using @code{DISTINCT} on results from functions that refered to Fixed bug when using @code{DISTINCT} on results from functions that refered to
client/mysqladmin.c
View file @ ea757126
...@@ -28,7 +28,7 @@ ...@@ -28,7 +28,7 @@
#include <my_pthread.h> /* because of signal() */ #include <my_pthread.h> /* because of signal() */
#endif #endif
#define ADMIN_VERSION "8.14" #define ADMIN_VERSION "8.15"
#define MAX_MYSQL_VAR 64 #define MAX_MYSQL_VAR 64
#define MAX_TIME_TO_WAIT 3600 /* Wait for shutdown */ #define MAX_TIME_TO_WAIT 3600 /* Wait for shutdown */
#define MAX_TRUNC_LENGTH 3 #define MAX_TRUNC_LENGTH 3
...@@ -404,7 +404,11 @@ static my_bool execute_commands(MYSQL *mysql,int argc, char **argv) ...@@ -404,7 +404,11 @@ static my_bool execute_commands(MYSQL *mysql,int argc, char **argv)
} }
sprintf(buff,"create database %.*s",FN_REFLEN,argv[1]); sprintf(buff,"create database %.*s",FN_REFLEN,argv[1]);
if (mysql_query(mysql,buff)) if (mysql_query(mysql,buff))
{
my_printf_error(0,"Create failed; error: '%-.200s'",MYF(ME_BELL),
mysql_error(mysql));
return 1; return 1;
}
else else
{ {
argc--; argv++; argc--; argv++;
...@@ -762,7 +766,7 @@ static my_bool execute_commands(MYSQL *mysql,int argc, char **argv) ...@@ -762,7 +766,7 @@ static my_bool execute_commands(MYSQL *mysql,int argc, char **argv)
mysql->reconnect=1; /* Automatic reconnect is default */ mysql->reconnect=1; /* Automatic reconnect is default */
break; break;
default: default:
my_printf_error(0,"Unknown command: '%s'",MYF(ME_BELL),argv[0]); my_printf_error(0,"Unknown command: '%-.60s'",MYF(ME_BELL),argv[0]);
return 1; return 1;
} }
} }
......
include/myisam.h
View file @ ea757126
...@@ -324,7 +324,7 @@ typedef struct st_mi_check_param ...@@ -324,7 +324,7 @@ typedef struct st_mi_check_param
uint testflag; uint testflag;
uint8 language; uint8 language;
my_bool using_global_keycache, opt_lock_memory, opt_follow_links; my_bool using_global_keycache, opt_lock_memory, opt_follow_links;
my_bool retry_repair,retry_without_quick; my_bool retry_repair,retry_without_quick, force_sort;
char temp_filename[FN_REFLEN],*isam_file_name,*tmpdir; char temp_filename[FN_REFLEN],*isam_file_name,*tmpdir;
int tmpfile_createflag; int tmpfile_createflag;
myf myf_rw; myf myf_rw;
......
libmysql/libmysql.c
View file @ ea757126
...@@ -485,7 +485,7 @@ static void free_old_query(MYSQL *mysql) ...@@ -485,7 +485,7 @@ static void free_old_query(MYSQL *mysql)
DBUG_VOID_RETURN; DBUG_VOID_RETURN;
} }
#ifdef HAVE_GETPWUID #if defined(HAVE_GETPWUID) && defined(NO_GETPWUID_DECL)
struct passwd *getpwuid(uid_t); struct passwd *getpwuid(uid_t);
char* getlogin(void); char* getlogin(void);
#endif #endif
...@@ -501,14 +501,6 @@ static void read_user_name(char *name) ...@@ -501,14 +501,6 @@ static void read_user_name(char *name)
#ifdef HAVE_GETPWUID #ifdef HAVE_GETPWUID
struct passwd *skr; struct passwd *skr;
const char *str; const char *str;
/*#ifdef __cplusplus
extern "C" struct passwd *getpwuid(uid_t);
extern "C" { char* getlogin(void); }
#else
char * getlogin();
struct passwd *getpwuid(uid_t);
#endif
*/
if ((str=getlogin()) == NULL) if ((str=getlogin()) == NULL)
{ {
if ((skr=getpwuid(geteuid())) != NULL) if ((skr=getpwuid(geteuid())) != NULL)
......
myisam/mi_check.c
View file @ ea757126
...@@ -1464,6 +1464,7 @@ int mi_sort_index(MI_CHECK *param, register MI_INFO *info, my_string name) ...@@ -1464,6 +1464,7 @@ int mi_sort_index(MI_CHECK *param, register MI_INFO *info, my_string name)
my_off_t index_pos[MI_MAX_POSSIBLE_KEY]; my_off_t index_pos[MI_MAX_POSSIBLE_KEY];
uint r_locks,w_locks; uint r_locks,w_locks;
MYISAM_SHARE *share=info->s; MYISAM_SHARE *share=info->s;
MI_STATE_INFO old_state;
DBUG_ENTER("sort_index"); DBUG_ENTER("sort_index");
if (!(param->testflag & T_SILENT)) if (!(param->testflag & T_SILENT))
...@@ -1502,9 +1503,10 @@ int mi_sort_index(MI_CHECK *param, register MI_INFO *info, my_string name) ...@@ -1502,9 +1503,10 @@ int mi_sort_index(MI_CHECK *param, register MI_INFO *info, my_string name)
/* Flush key cache for this file if we are calling this outside myisamchk */ /* Flush key cache for this file if we are calling this outside myisamchk */
flush_key_blocks(share->kfile, FLUSH_IGNORE_CHANGED); flush_key_blocks(share->kfile, FLUSH_IGNORE_CHANGED);
/* Put same locks as old file */
share->state.version=(ulong) time((time_t*) 0); share->state.version=(ulong) time((time_t*) 0);
old_state=share->state; /* save state if not stored */
r_locks=share->r_locks; w_locks=share->w_locks; r_locks=share->r_locks; w_locks=share->w_locks;
/* Put same locks as old file */
share->r_locks=share->w_locks=0; share->r_locks=share->w_locks=0;
(void) _mi_writeinfo(info,WRITEINFO_UPDATE_KEYFILE); (void) _mi_writeinfo(info,WRITEINFO_UPDATE_KEYFILE);
VOID(my_close(share->kfile,MYF(MY_WME))); VOID(my_close(share->kfile,MYF(MY_WME)));
...@@ -1518,6 +1520,7 @@ int mi_sort_index(MI_CHECK *param, register MI_INFO *info, my_string name) ...@@ -1518,6 +1520,7 @@ int mi_sort_index(MI_CHECK *param, register MI_INFO *info, my_string name)
_mi_readinfo(info,F_WRLCK,0); /* Will lock the table */ _mi_readinfo(info,F_WRLCK,0); /* Will lock the table */
info->lock_type=F_WRLCK; info->lock_type=F_WRLCK;
share->r_locks=r_locks; share->w_locks=w_locks; share->r_locks=r_locks; share->w_locks=w_locks;
share->state=old_state; /* Restore old state */
info->state->key_file_length=param->new_file_pos; info->state->key_file_length=param->new_file_pos;
info->update= (short) (HA_STATE_CHANGED | HA_STATE_ROW_CHANGED); info->update= (short) (HA_STATE_CHANGED | HA_STATE_ROW_CHANGED);
...@@ -3144,7 +3147,7 @@ void mi_disable_non_unique_index(MI_INFO *info, ha_rows rows) ...@@ -3144,7 +3147,7 @@ void mi_disable_non_unique_index(MI_INFO *info, ha_rows rows)
*/ */
my_bool mi_test_if_sort_rep(MI_INFO *info, ha_rows rows, my_bool mi_test_if_sort_rep(MI_INFO *info, ha_rows rows,
my_bool force __attribute__((unused))) my_bool force)
{ {
MYISAM_SHARE *share=info->s; MYISAM_SHARE *share=info->s;
uint i; uint i;
...@@ -3160,7 +3163,8 @@ my_bool mi_test_if_sort_rep(MI_INFO *info, ha_rows rows, ...@@ -3160,7 +3163,8 @@ my_bool mi_test_if_sort_rep(MI_INFO *info, ha_rows rows,
is very time-consuming process, it's better to leave it to repair stage is very time-consuming process, it's better to leave it to repair stage
but this repair shouldn't be repair_by_sort (serg) but this repair shouldn't be repair_by_sort (serg)
*/ */
if (mi_too_big_key_for_sort(key,rows) || (key->flag & HA_FULLTEXT)) if (!force && mi_too_big_key_for_sort(key,rows) ||
(key->flag & HA_FULLTEXT))
return FALSE; return FALSE;
} }
return TRUE; return TRUE;
......
myisam/mi_delete_table.c
View file @ ea757126
...@@ -37,7 +37,8 @@ int mi_delete_table(const char *name) ...@@ -37,7 +37,8 @@ int mi_delete_table(const char *name)
#ifdef USE_RAID #ifdef USE_RAID
{ {
MI_INFO *info; MI_INFO *info;
if (!(info=mi_open(name, O_RDONLY, 0))) /* we use 'open_for_repair' to be able to delete a crashed table */
if (!(info=mi_open(name, O_RDONLY, HA_OPEN_FOR_REPAIR)))
DBUG_RETURN(my_errno); DBUG_RETURN(my_errno);
raid_type = info->s->base.raid_type; raid_type = info->s->base.raid_type;
raid_chunks = info->s->base.raid_chunks; raid_chunks = info->s->base.raid_chunks;
......
myisam/mi_key.c
View file @ ea757126
...@@ -184,8 +184,9 @@ uint _mi_pack_key(register MI_INFO *info, uint keynr, uchar *key, uchar *old, ...@@ -184,8 +184,9 @@ uint _mi_pack_key(register MI_INFO *info, uint keynr, uchar *key, uchar *old,
/* Length of key-part used with mi_rkey() always 2 */ /* Length of key-part used with mi_rkey() always 2 */
uint tmp_length=uint2korr(pos); uint tmp_length=uint2korr(pos);
k_length-= 2+length; k_length-= 2+length;
set_if_smaller(length,tmp_length); set_if_smaller(length,tmp_length); /* Safety */
store_key_length_inc(key,length); store_key_length_inc(key,length);
old+=2; /* Skipp length */
memcpy((byte*) key, pos+2,(size_t) length); memcpy((byte*) key, pos+2,(size_t) length);
key+= length; key+= length;
continue; continue;
......
myisam/myisamchk.c
View file @ ea757126
...@@ -189,6 +189,7 @@ static struct option long_options[] = ...@@ -189,6 +189,7 @@ static struct option long_options[] =
{"silent", no_argument, 0, 's'}, {"silent", no_argument, 0, 's'},
{"sort-index", no_argument, 0, 'S'}, {"sort-index", no_argument, 0, 'S'},
{"sort-records", required_argument, 0, 'R'}, {"sort-records", required_argument, 0, 'R'},
{"sort-recover", no_argument, 0, 'n'},
{"tmpdir", required_argument, 0, 't'}, {"tmpdir", required_argument, 0, 't'},
{"update-state", no_argument, 0, 'U'}, {"update-state", no_argument, 0, 'U'},
{"unpack", no_argument, 0, 'u'}, {"unpack", no_argument, 0, 'u'},
...@@ -200,7 +201,7 @@ static struct option long_options[] = ...@@ -200,7 +201,7 @@ static struct option long_options[] =
static void print_version(void) static void print_version(void)
{ {
printf("%s Ver 1.41 for %s at %s\n",my_progname,SYSTEM_TYPE, printf("%s Ver 1.42 for %s at %s\n",my_progname,SYSTEM_TYPE,
MACHINE_TYPE); MACHINE_TYPE);
} }
...@@ -255,9 +256,11 @@ static void usage(void) ...@@ -255,9 +256,11 @@ static void usage(void)
myisamchk repairs the table a symlink points at.\n\ myisamchk repairs the table a symlink points at.\n\
-r, --recover Can fix almost anything except unique keys that aren't\n\ -r, --recover Can fix almost anything except unique keys that aren't\n\
unique.\n\ unique.\n\
-n, --sort-recover Force recovering with sorting even if the temporary\n\
file would be very big.\n\
-o, --safe-recover Uses old recovery method; Slower than '-r' but can\n\ -o, --safe-recover Uses old recovery method; Slower than '-r' but can\n\
handle a couple of cases where '-r' reports that it can't\n\ handle a couple of cases where '-r' reports that it\n\
fix the data file.\n\ can't fix the data file.\n\
--character-sets-dir=...\n\ --character-sets-dir=...\n\
Directory where character sets are\n\ Directory where character sets are\n\
--set-character-set=name\n\ --set-character-set=name\n\
...@@ -306,7 +309,8 @@ static void get_options(register int *argc,register char ***argv) ...@@ -306,7 +309,8 @@ static void get_options(register int *argc,register char ***argv)
set_all_changeable_vars(changeable_vars); set_all_changeable_vars(changeable_vars);
if (isatty(fileno(stdout))) if (isatty(fileno(stdout)))
check_param.testflag|=T_WRITE_LOOP; check_param.testflag|=T_WRITE_LOOP;
while ((c=getopt_long(*argc,*argv,"aBcCdeifF?lqrmosSTuUvVw#:b:D:k:O:R:A::t:", while ((c=getopt_long(*argc,*argv,
"aBcCdeifF?lqrmnosSTuUvVw#:b:D:k:O:R:A::t:",
long_options, &option_index)) != EOF) long_options, &option_index)) != EOF)
{ {
switch(c) { switch(c) {
...@@ -374,8 +378,13 @@ static void get_options(register int *argc,register char ***argv) ...@@ -374,8 +378,13 @@ static void get_options(register int *argc,register char ***argv)
break; break;
case 'o': case 'o':
check_param.testflag= (check_param.testflag & ~T_REP_BY_SORT) | T_REP; check_param.testflag= (check_param.testflag & ~T_REP_BY_SORT) | T_REP;
check_param.force_sort=0;
my_disable_async_io=1; /* More safety */ my_disable_async_io=1; /* More safety */
break; break;
case 'n':
check_param.testflag= (check_param.testflag & ~T_REP) | T_REP_BY_SORT;
check_param.force_sort=1;
break;
case 'q': case 'q':
check_param.opt_rep_quick++; check_param.opt_rep_quick++;
break; break;
...@@ -683,7 +692,8 @@ static int myisamchk(MI_CHECK *param, my_string filename) ...@@ -683,7 +692,8 @@ static int myisamchk(MI_CHECK *param, my_string filename)
if ((param->testflag & T_REP_BY_SORT) && if ((param->testflag & T_REP_BY_SORT) &&
(share->state.key_map || (share->state.key_map ||
(rep_quick && !param->keys_in_use && !recreate)) && (rep_quick && !param->keys_in_use && !recreate)) &&
mi_test_if_sort_rep(info, info->state->records, 1)) mi_test_if_sort_rep(info, info->state->records,
check_param.force_sort))
{ {
error=mi_repair_by_sort(&check_param,info,fixed_name,rep_quick); error=mi_repair_by_sort(&check_param,info,fixed_name,rep_quick);
state_updated=1; state_updated=1;
......
mysql-test/mysql-test-run.sh
View file @ ea757126
...@@ -392,6 +392,7 @@ start_slave() ...@@ -392,6 +392,7 @@ start_slave()
master_info="--master-user=root \ master_info="--master-user=root \
--master-connect-retry=1 \ --master-connect-retry=1 \
--master-host=127.0.0.1 \ --master-host=127.0.0.1 \
--master-password= \
--master-port=$MASTER_MYPORT \ --master-port=$MASTER_MYPORT \
--server-id=2" --server-id=2"
else else
......
mysql-test/r/case.result
View file @ ea757126
...@@ -32,3 +32,11 @@ case when 1>0 then "TRUE" else "FALSE" END ...@@ -32,3 +32,11 @@ case when 1>0 then "TRUE" else "FALSE" END
TRUE TRUE
case when 1<0 then "TRUE" else "FALSE" END case when 1<0 then "TRUE" else "FALSE" END
FALSE FALSE
fcase count(*)
0 2
2 1
3 1
fcase count(*)
nothing 2
one 1
two 1
mysql-test/r/func_time.result
View file @ ea757126
...@@ -186,3 +186,9 @@ extract(SECOND FROM "1999-01-02 10:11:12") ...@@ -186,3 +186,9 @@ extract(SECOND FROM "1999-01-02 10:11:12")
12 12
ctime hour(ctime) ctime hour(ctime)
2001-01-12 12:23:40 12 2001-01-12 12:23:40 12
monthname(date)
NULL
January
monthname(date)
NULL
January
mysql-test/r/type_blob.result
View file @ ea757126
...@@ -257,3 +257,7 @@ hello ...@@ -257,3 +257,7 @@ hello
hello word hello word
count(*) count(*)
2 2
foobar boggle
fish 10
foobar boggle
fish 10
mysql-test/r/type_datetime.result
View file @ ea757126
...@@ -13,6 +13,8 @@ t ...@@ -13,6 +13,8 @@ t
9999-12-31 23:59:59 9999-12-31 23:59:59
Table Op Msg_type Msg_text Table Op Msg_type Msg_text
test.t1 optimize status OK test.t1 optimize status OK
Table Op Msg_type Msg_text
test.t1 check status OK
t t
2000-01-01 00:00:00 2000-01-01 00:00:00
2069-12-31 00:00:00 2069-12-31 00:00:00
......
mysql-test/t/case.test
View file @ ea757126
...@@ -2,6 +2,8 @@ ...@@ -2,6 +2,8 @@
# Testing of CASE # Testing of CASE
# #
drop table if exists t1;
select CASE "b" when "a" then 1 when "b" then 2 END; select CASE "b" when "a" then 1 when "b" then 2 END;
select CASE "c" when "a" then 1 when "b" then 2 END; select CASE "c" when "a" then 1 when "b" then 2 END;
select CASE "c" when "a" then 1 when "b" then 2 ELSE 3 END; select CASE "c" when "a" then 1 when "b" then 2 ELSE 3 END;
...@@ -19,3 +21,12 @@ select (case 1/0 when "a" then "true" END) | 0; ...@@ -19,3 +21,12 @@ select (case 1/0 when "a" then "true" END) | 0;
select (case 1/0 when "a" then "true" END) + 0.0; select (case 1/0 when "a" then "true" END) + 0.0;
select case when 1>0 then "TRUE" else "FALSE" END; select case when 1>0 then "TRUE" else "FALSE" END;
select case when 1<0 then "TRUE" else "FALSE" END; select case when 1<0 then "TRUE" else "FALSE" END;
#
# Test bug when using GROUP BY on CASE
#
create table t1 (a int);
insert into t1 values(1),(2),(3),(4);
select case a when 1 then 2 when 2 then 3 else 0 end as fcase, count(*) from t1 group by fcase;
select case a when 1 then "one" when 2 then "two" else "nothing" end as fcase, count(*) from t1 group by fcase;
drop table t1;
mysql-test/t/func_time.test
View file @ ea757126
# #
# time functions # time functions
# #
drop table if exists t1,t2;
select from_days(to_days("960101")),to_days(960201)-to_days("19960101"),to_days(date_add(curdate(), interval 1 day))-to_days(curdate()),weekday("1997-11-29"); select from_days(to_days("960101")),to_days(960201)-to_days("19960101"),to_days(date_add(curdate(), interval 1 day))-to_days(curdate()),weekday("1997-11-29");
select period_add("9602",-12),period_diff(199505,"9404") ; select period_add("9602",-12),period_diff(199505,"9404") ;
select now()-now(),weekday(curdate())-weekday(now()),unix_timestamp()-unix_timestamp(now()); select now()-now(),weekday(curdate())-weekday(now()),unix_timestamp()-unix_timestamp(now());
...@@ -99,9 +101,21 @@ select extract(MINUTE FROM "10:11:12"); ...@@ -99,9 +101,21 @@ select extract(MINUTE FROM "10:11:12");
select extract(MINUTE_SECOND FROM "10:11:12"); select extract(MINUTE_SECOND FROM "10:11:12");
select extract(SECOND FROM "1999-01-02 10:11:12"); select extract(SECOND FROM "1999-01-02 10:11:12");
drop table if exists t1;
create table t1 (ctime varchar(20)); create table t1 (ctime varchar(20));
insert into t1 values ('2001-01-12 12:23:40'); insert into t1 values ('2001-01-12 12:23:40');
select ctime, hour(ctime) from t1; select ctime, hour(ctime) from t1;
drop table t1; drop table t1;
#
# Test bug with monthname() and NULL
#
create table t1 (id int);
create table t2 (id int, date date);
insert into t1 values (1);
insert into t2 values (1, "0000-00-00");
insert into t1 values (2);
insert into t2 values (2, "2000-01-01");
select monthname(date) from t1 inner join t2 on t1.id = t2.id;
select monthname(date) from t1 inner join t2 on t1.id = t2.id order by t1.id;
drop table t1,t2;
mysql-test/t/rpl000017-slave.sh
View file @ ea757126
...@@ -2,8 +2,8 @@ cat > $MYSQL_TEST_DIR/var/slave-data/master.info <<EOF ...@@ -2,8 +2,8 @@ cat > $MYSQL_TEST_DIR/var/slave-data/master.info <<EOF
master-bin.001 master-bin.001
4 4
127.0.0.1 127.0.0.1
root replicate
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
9306 9306
1 1
EOF EOF
mysql-test/t/rpl000017.test
View file @ ea757126
...@@ -2,6 +2,8 @@ connect (master,localhost,root,,test,0,mysql-master.sock); ...@@ -2,6 +2,8 @@ connect (master,localhost,root,,test,0,mysql-master.sock);
connect (slave,localhost,root,,test,0,mysql-slave.sock); connect (slave,localhost,root,,test,0,mysql-slave.sock);
connection master; connection master;
reset master; reset master;
grant file on *.* to replicate@localhost identified by
'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa';
connection slave; connection slave;
slave start; slave start;
connection master; connection master;
......
mysql-test/t/type_blob.test
View file @ ea757126
...@@ -239,3 +239,13 @@ INSERT INTO t1 VALUES (0,'traktor','1111111111111'); ...@@ -239,3 +239,13 @@ INSERT INTO t1 VALUES (0,'traktor','1111111111111');
INSERT INTO t1 VALUES (1,'traktor','1111111111111111111111111'); INSERT INTO t1 VALUES (1,'traktor','1111111111111111111111111');
select count(*) from t1 where f2='traktor'; select count(*) from t1 where f2='traktor';
drop table t1; drop table t1;
#
# Test of found bug when blob is first key part
#
create table t1 (foobar tinyblob not null, boggle smallint not null, key (foobar(32), boggle));
insert into t1 values ('fish', 10),('bear', 20);
select foobar, boggle from t1 where foobar = 'fish';
select foobar, boggle from t1 where foobar = 'fish' and boggle = 10;
drop table t1;
mysql-test/t/type_datetime.test
View file @ ea757126
# #
# testing different DATETIME ranges # testing different DATETIME ranges
# #
drop table if exists t1;
create table t1 (t datetime); create table t1 (t datetime);
insert into t1 values(101),(691231),(700101),(991231),(10000101),(99991231),(101000000),(691231000000),(700101000000),(991231235959),(10000101000000),(99991231235959); insert into t1 values(101),(691231),(700101),(991231),(10000101),(99991231),(101000000),(691231000000),(700101000000),(991231235959),(10000101000000),(99991231235959);
select * from t1; select * from t1;
delete from t1 where t > 0; delete from t1 where t > 0;
optimize table t1; optimize table t1;
check table t1;
insert into t1 values("000101"),("691231"),("700101"),("991231"),("00000101"),("00010101"),("99991231"),("00101000000"),("691231000000"),("700101000000"),("991231235959"),("10000101000000"),("99991231235959"); insert into t1 values("000101"),("691231"),("700101"),("991231"),("00000101"),("00010101"),("99991231"),("00101000000"),("691231000000"),("700101000000"),("991231235959"),("10000101000000"),("99991231235959");
select * from t1; select * from t1;
drop table t1; drop table t1;
......
mysys/my_bitmap.c
View file @ ea757126
...@@ -17,6 +17,13 @@ ...@@ -17,6 +17,13 @@
/* /*
Handling of uchar arrays as large bitmaps. Handling of uchar arrays as large bitmaps.
We assume that the size of the used bitmap is less than ~(uint) 0
TODO:
create an unique structure for this that includes the mutex and bitmap size
make a init function that will allocate the bitmap and init the mutex
make an end function that will free everything
*/ */
#include "mysys_priv.h" #include "mysys_priv.h"
...@@ -24,37 +31,51 @@ ...@@ -24,37 +31,51 @@
pthread_mutex_t LOCK_bitmap; pthread_mutex_t LOCK_bitmap;
void bitmap_set_bit(uchar *bitmap, uint bitmap_size, uint bitmap_bit) { void bitmap_set_bit(uchar *bitmap, uint bitmap_size, uint bitmap_bit)
if((bitmap_bit != MY_BIT_NONE) && (bitmap_bit < bitmap_size*8)) { {
if (bitmap_bit < bitmap_size*8)
{
pthread_mutex_lock(&LOCK_bitmap); pthread_mutex_lock(&LOCK_bitmap);
bitmap[bitmap_bit / 8] |= (1 << bitmap_bit % 8); bitmap[bitmap_bit / 8] |= (1 << (bitmap_bit & 7));
pthread_mutex_unlock(&LOCK_bitmap); pthread_mutex_unlock(&LOCK_bitmap);
}; }
}; }
uint bitmap_set_next(uchar *bitmap, uint bitmap_size) { uint bitmap_set_next(uchar *bitmap, uint bitmap_size)
{
uint bit_found = MY_BIT_NONE; uint bit_found = MY_BIT_NONE;
int i, b; uint i;
pthread_mutex_lock(&LOCK_bitmap); pthread_mutex_lock(&LOCK_bitmap);
for(i=0; (i<bitmap_size) && (bit_found==MY_BIT_NONE); i++) { for (i=0; i < bitmap_size ; i++, bitmap++)
if(bitmap[i] == 0xff) continue; {
for(b=0; (b<8) && (bit_found==MY_BIT_NONE); b++) if (*bitmap != 0xff)
if((bitmap[i] & 1<<b) == 0) { { /* Found slot with free bit */
bit_found = (i*8)+b; uint b;
bitmap[i] |= 1<<b; for (b=0; ; b++)
}; {
}; if (!(*bitmap & (1 << b)))
{
*bitmap |= 1<<b;
bit_found = (i*8)+b;
break;
}
}
break; /* Found bit */
}
}
pthread_mutex_unlock(&LOCK_bitmap); pthread_mutex_unlock(&LOCK_bitmap);
return bit_found; return bit_found;
}; }
void bitmap_clear_bit(uchar *bitmap, uint bitmap_size, uint bitmap_bit) { void bitmap_clear_bit(uchar *bitmap, uint bitmap_size, uint bitmap_bit)
if((bitmap_bit != MY_BIT_NONE) && (bitmap_bit < bitmap_size*8)) { {
if (bitmap_bit < bitmap_size*8)
{
pthread_mutex_lock(&LOCK_bitmap); pthread_mutex_lock(&LOCK_bitmap);
bitmap[bitmap_bit / 8] &= ~(1 << bitmap_bit % 8); bitmap[bitmap_bit / 8] &= ~ (1 << (bitmap_bit & 7));
pthread_mutex_unlock(&LOCK_bitmap); pthread_mutex_unlock(&LOCK_bitmap);
}; }
}; }
sql-bench/limits/ms-sql.cfg
View file @ ea757126
This diff is collapsed.
sql/item_cmpfunc.cc
View file @ ea757126
...@@ -721,17 +721,41 @@ double Item_func_case::val() ...@@ -721,17 +721,41 @@ double Item_func_case::val()
bool bool
Item_func_case::fix_fields(THD *thd,TABLE_LIST *tables) Item_func_case::fix_fields(THD *thd,TABLE_LIST *tables)
{ {
if (first_expr && first_expr->fix_fields(thd,tables) || if (first_expr && first_expr->fix_fields(thd,tables) ||
else_expr && else_expr->fix_fields(thd,tables)) else_expr && else_expr->fix_fields(thd,tables))
return 1; return 1;
if (Item_func::fix_fields(thd,tables)) if (Item_func::fix_fields(thd,tables))
return 1; return 1;
if (first_expr)
{
used_tables_cache|=(first_expr)->used_tables();
const_item_cache&= (first_expr)->const_item();
}
if (else_expr)
{
used_tables_cache|=(else_expr)->used_tables();
const_item_cache&= (else_expr)->const_item();
}
if (!else_expr || else_expr->maybe_null) if (!else_expr || else_expr->maybe_null)
maybe_null=1; // The result may be NULL maybe_null=1; // The result may be NULL
return 0; return 0;
} }
void Item_func_case::update_used_tables()
{
Item_func::update_used_tables();
if (first_expr)
{
used_tables_cache|=(first_expr)->used_tables();
const_item_cache&= (first_expr)->const_item();
}
if (else_expr)
{
used_tables_cache|=(else_expr)->used_tables();
const_item_cache&= (else_expr)->const_item();
}
}
void Item_func_case::fix_length_and_dec() void Item_func_case::fix_length_and_dec()
{ {
...@@ -750,6 +774,7 @@ void Item_func_case::fix_length_and_dec() ...@@ -750,6 +774,7 @@ void Item_func_case::fix_length_and_dec()
} }
} }
/* TODO: Fix this so that it prints the whole CASE expression */
void Item_func_case::print(String *str) void Item_func_case::print(String *str)
{ {
......
sql/item_cmpfunc.h
View file @ ea757126
...@@ -254,6 +254,7 @@ public: ...@@ -254,6 +254,7 @@ public:
longlong val_int(); longlong val_int();
String *val_str(String *); String *val_str(String *);
void fix_length_and_dec(); void fix_length_and_dec();
void update_used_tables();
enum Item_result result_type () const { return cached_result_type; } enum Item_result result_type () const { return cached_result_type; }
const char *func_name() const { return "case"; } const char *func_name() const { return "case"; }
void print(String *str); void print(String *str);
......
sql/item_timefunc.cc
View file @ ea757126
...@@ -135,7 +135,11 @@ String* Item_func_monthname::val_str(String* str) ...@@ -135,7 +135,11 @@ String* Item_func_monthname::val_str(String* str)
{ {
uint month=(uint) Item_func_month::val_int(); uint month=(uint) Item_func_month::val_int();
if (!month) // This is also true for NULL if (!month) // This is also true for NULL
{
null_value=1;
return (String*) 0; return (String*) 0;
}
null_value=0;
return &month_names[month-1]; return &month_names[month-1];
} }
......
sql/sql_db.cc
View file @ ea757126
...@@ -28,6 +28,8 @@ ...@@ -28,6 +28,8 @@
static long mysql_rm_known_files(THD *thd, MY_DIR *dirp, const char *path, static long mysql_rm_known_files(THD *thd, MY_DIR *dirp, const char *path,
uint level); uint level);
/* db-name is already validated when we come here */
void mysql_create_db(THD *thd, char *db, uint create_options) void mysql_create_db(THD *thd, char *db, uint create_options)
{ {
char path[FN_REFLEN+16]; char path[FN_REFLEN+16];
...@@ -35,11 +37,6 @@ void mysql_create_db(THD *thd, char *db, uint create_options) ...@@ -35,11 +37,6 @@ void mysql_create_db(THD *thd, char *db, uint create_options)
long result=1; long result=1;
DBUG_ENTER("mysql_create_db"); DBUG_ENTER("mysql_create_db");
if (!stripp_sp(db) || check_db_name(db))
{
net_printf(&thd->net,ER_WRONG_DB_NAME, db);
DBUG_VOID_RETURN;
}
VOID(pthread_mutex_lock(&LOCK_mysql_create_db)); VOID(pthread_mutex_lock(&LOCK_mysql_create_db));
/* Check directory */ /* Check directory */
...@@ -96,6 +93,8 @@ static TYPELIB deletable_extentions= ...@@ -96,6 +93,8 @@ static TYPELIB deletable_extentions=
{array_elements(del_exts)-1,"del_exts", del_exts}; {array_elements(del_exts)-1,"del_exts", del_exts};
/* db-name is already validated when we come here */
void mysql_rm_db(THD *thd,char *db,bool if_exists) void mysql_rm_db(THD *thd,char *db,bool if_exists)
{ {
long deleted=0; long deleted=0;
...@@ -103,12 +102,6 @@ void mysql_rm_db(THD *thd,char *db,bool if_exists) ...@@ -103,12 +102,6 @@ void mysql_rm_db(THD *thd,char *db,bool if_exists)
MY_DIR *dirp; MY_DIR *dirp;
DBUG_ENTER("mysql_rm_db"); DBUG_ENTER("mysql_rm_db");
if (!stripp_sp(db) || check_db_name(db))
{
net_printf(&thd->net,ER_WRONG_DB_NAME, db);
DBUG_VOID_RETURN;
}
VOID(pthread_mutex_lock(&LOCK_mysql_create_db)); VOID(pthread_mutex_lock(&LOCK_mysql_create_db));
VOID(pthread_mutex_lock(&LOCK_open)); VOID(pthread_mutex_lock(&LOCK_open));
......
sql/sql_parse.cc
View file @ ea757126
...@@ -510,7 +510,7 @@ int mysql_table_dump(THD* thd, char* db, char* tbl_name, int fd) ...@@ -510,7 +510,7 @@ int mysql_table_dump(THD* thd, char* db, char* tbl_name, int fd)
int error = 0; int error = 0;
DBUG_ENTER("mysql_table_dump"); DBUG_ENTER("mysql_table_dump");
db = (db && db[0]) ? db : thd->db; db = (db && db[0]) ? db : thd->db;
if(!(table_list = (TABLE_LIST*) sql_calloc(sizeof(TABLE_LIST)))) if (!(table_list = (TABLE_LIST*) sql_calloc(sizeof(TABLE_LIST))))
DBUG_RETURN(1); // out of memory DBUG_RETURN(1); // out of memory
table_list->db = db; table_list->db = db;
table_list->real_name = table_list->name = tbl_name; table_list->real_name = table_list->name = tbl_name;
...@@ -518,9 +518,14 @@ int mysql_table_dump(THD* thd, char* db, char* tbl_name, int fd) ...@@ -518,9 +518,14 @@ int mysql_table_dump(THD* thd, char* db, char* tbl_name, int fd)
table_list->next = 0; table_list->next = 0;
remove_escape(table_list->real_name); remove_escape(table_list->real_name);
if(!(table=open_ltable(thd, table_list, TL_READ_NO_INSERT))) if (!(table=open_ltable(thd, table_list, TL_READ_NO_INSERT)))
DBUG_RETURN(1); DBUG_RETURN(1);
if (!db || check_db_name(db))
{
net_printf(&thd->net,ER_WRONG_DB_NAME, db ? db : "NULL");
goto err;
}
if (check_access(thd, SELECT_ACL, db, &table_list->grant.privilege)) if (check_access(thd, SELECT_ACL, db, &table_list->grant.privilege))
goto err; goto err;
if (grant_option && check_grant(thd, SELECT_ACL, table_list)) if (grant_option && check_grant(thd, SELECT_ACL, table_list))
...@@ -710,6 +715,12 @@ bool do_command(THD *thd) ...@@ -710,6 +715,12 @@ bool do_command(THD *thd)
case COM_CREATE_DB: case COM_CREATE_DB:
{ {
char *db=thd->strdup(packet+1); char *db=thd->strdup(packet+1);
// null test to handle EOM
if (!db || !stripp_sp(db) || check_db_name(db))
{
net_printf(&thd->net,ER_WRONG_DB_NAME, db ? db : "NULL");
break;
}
if (check_access(thd,CREATE_ACL,db,0,1)) if (check_access(thd,CREATE_ACL,db,0,1))
break; break;
mysql_log.write(thd,command,packet+1); mysql_log.write(thd,command,packet+1);
...@@ -719,6 +730,12 @@ bool do_command(THD *thd) ...@@ -719,6 +730,12 @@ bool do_command(THD *thd)
case COM_DROP_DB: case COM_DROP_DB:
{ {
char *db=thd->strdup(packet+1); char *db=thd->strdup(packet+1);
// null test to handle EOM
if (!db || !stripp_sp(db) || check_db_name(db))
{
net_printf(&thd->net,ER_WRONG_DB_NAME, db ? db : "NULL");
break;
}
if (check_access(thd,DROP_ACL,db,0,1) || end_active_trans(thd)) if (check_access(thd,DROP_ACL,db,0,1) || end_active_trans(thd))
break; break;
mysql_log.write(thd,command,db); mysql_log.write(thd,command,db);
...@@ -1503,10 +1520,10 @@ mysql_execute_command(void) ...@@ -1503,10 +1520,10 @@ mysql_execute_command(void)
goto error; /* purecov: inspected */ goto error; /* purecov: inspected */
} }
remove_escape(db); // Fix escaped '_' remove_escape(db); // Fix escaped '_'
if (strlen(db) > NAME_LEN) if (check_db_name(db))
{ {
net_printf(&thd->net,ER_WRONG_DB_NAME, db); net_printf(&thd->net,ER_WRONG_DB_NAME, db);
goto error; goto error;
} }
if (check_access(thd,SELECT_ACL,db,&thd->col_access)) if (check_access(thd,SELECT_ACL,db,&thd->col_access))
goto error; /* purecov: inspected */ goto error; /* purecov: inspected */
...@@ -1666,6 +1683,11 @@ mysql_execute_command(void) ...@@ -1666,6 +1683,11 @@ mysql_execute_command(void)
break; break;
case SQLCOM_CREATE_DB: case SQLCOM_CREATE_DB:
{ {
if (!stripp_sp(lex->name) || check_db_name(lex->name))
{
net_printf(&thd->net,ER_WRONG_DB_NAME, lex->name);
break;
}
if (check_access(thd,CREATE_ACL,lex->name,0,1)) if (check_access(thd,CREATE_ACL,lex->name,0,1))
break; break;
mysql_create_db(thd,lex->name,lex->create_info.options); mysql_create_db(thd,lex->name,lex->create_info.options);
...@@ -1673,6 +1695,11 @@ mysql_execute_command(void) ...@@ -1673,6 +1695,11 @@ mysql_execute_command(void)
} }
case SQLCOM_DROP_DB: case SQLCOM_DROP_DB:
{ {
if (!stripp_sp(lex->name) || check_db_name(lex->name))
{
net_printf(&thd->net,ER_WRONG_DB_NAME, lex->name);
break;
}
if (check_access(thd,DROP_ACL,lex->name,0,1) || if (check_access(thd,DROP_ACL,lex->name,0,1) ||
end_active_trans(thd)) end_active_trans(thd))
break; break;
...@@ -1887,12 +1914,6 @@ check_access(THD *thd,uint want_access,const char *db, uint *save_priv, ...@@ -1887,12 +1914,6 @@ check_access(THD *thd,uint want_access,const char *db, uint *save_priv,
if (db == any_db) if (db == any_db)
return FALSE; // Allow select on anything return FALSE; // Allow select on anything
if (strlen(db) > NAME_LEN || check_db_name(db))
{
net_printf(&thd->net,ER_WRONG_DB_NAME, db);
return TRUE;
}
if (db && (!thd->db || strcmp(db,thd->db))) if (db && (!thd->db || strcmp(db,thd->db)))
db_access=acl_get(thd->host, thd->ip, (char*) &thd->remote.sin_addr, db_access=acl_get(thd->host, thd->ip, (char*) &thd->remote.sin_addr,
thd->priv_user, db); /* purecov: inspected */ thd->priv_user, db); /* purecov: inspected */
...@@ -1970,7 +1991,8 @@ static bool check_db_used(THD *thd,TABLE_LIST *tables) ...@@ -1970,7 +1991,8 @@ static bool check_db_used(THD *thd,TABLE_LIST *tables)
} }
static bool check_merge_table_access(THD *thd, char *db, TABLE_LIST *table_list) static bool check_merge_table_access(THD *thd, char *db,
TABLE_LIST *table_list)
{ {
int error=0; int error=0;
if (table_list) if (table_list)
...@@ -2463,8 +2485,8 @@ TABLE_LIST *add_table_to_list(Table_ident *table, LEX_STRING *alias, ...@@ -2463,8 +2485,8 @@ TABLE_LIST *add_table_to_list(Table_ident *table, LEX_STRING *alias,
DBUG_RETURN(0); // End of memory DBUG_RETURN(0); // End of memory
alias_str= alias ? alias->str : table->table.str; alias_str= alias ? alias->str : table->table.str;
if (table->table.length > NAME_LEN || if (table->table.length > NAME_LEN ||
table->db.str && table->db.length > NAME_LEN || check_table_name(table->table.str,table->table.length) ||
check_table_name(table->table.str,table->table.length)) table->db.str && check_db_name(table->db.str))
{ {
net_printf(&thd->net,ER_WRONG_TABLE_NAME,table->table.str); net_printf(&thd->net,ER_WRONG_TABLE_NAME,table->table.str);
DBUG_RETURN(0); DBUG_RETURN(0);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7