specifc command

Replaced "--exec rm" by "remove_file" which is a mysqltest command to
erase a file.

QUERY statement
      
Commit 55629 applied to 5.0-bugteam and 5.1-bugteam: 
Check for thd->killed in CHECKSUM loop.

init 'wc' variable


mysql-test/r/func_set.result:
  test result
mysql-test/t/func_set.test:
  test case
sql/item_func.cc:
  init 'wc' variable

replaced String->c_ptr() with String->c_ptr_safe()


mysql-test/r/func_encrypt.result:
  test result
mysql-test/t/func_encrypt.test:
  test case
sql/item_strfunc.cc:
  replaced String->c_ptr() with String->c_ptr_safe()

The warning happens because string argument is not zero ended.
The fix is to add new parameter 'length' to SQL_CRYPT() and
use ptr() instead of c_ptr().


mysql-test/r/func_str.result:
  test result
mysql-test/t/func_str.test:
  test case
sql/item_strfunc.cc:
  Added new parameter 'length' to SQL_CRYPT
sql/sql_crypt.cc:
  Added new parameter 'length' to SQL_CRYPT
sql/sql_crypt.h:
  Added new parameter 'length' to SQL_CRYPT

      
The rpl_binlog_corruption test case was inject failures, specifically,
incidents with invalid numbers to see if the replication was failing
gracefully. However, this test was causing the following warning message
in Valgrind: "Conditional jump or move depends on uninitialised value(s)"
      
The patch fixes the problem by correctly initializing the m_inicident 
number.

mysqldump.test is designed to run with concurrent inserts
disabled. It is disabling concurrent inserts at the very
beginning of the test case, and re-enables them at the
bottom of the test. But for some reason (likely incorrect
merge) we enable concurrent inserts in the middle of the test.

The problem is fixed by enabling concurrent inserts only
at the bottom of the test case.

1) BUG#27276 - InnoDB Error: ibuf cursor restoration fails

2) Follow up fix for BUG#27276 which fixes the bug introduced in
   the previous revision r2924

Detailed revision comments:

r2924 | marko | 2008-10-29 10:07:48 +0200 (Wed, 29 Oct 2008) | 7 lines
branches/5.1: Merge revision 2866 from branches/zip:

ibuf_delete_rec(): When the cursor to the insert buffer record cannot be
restored, do not complain if the tablespace does not exist. (Bug #27276)

Approved by Sunny Bains (rb://34)

r3598 | marko | 2008-12-22 15:28:03 +0200 (Mon, 22 Dec 2008) | 6 lines
branches/5.1: ibuf_delete_rec(): When the record cannot be found and
the tablespace has been dropped, commit the mini-transaction, so that
InnoDB will not hold the insert buffer tree latch in exclusive mode,
causing a potential deadlock.  This bug was introduced in the fix of
Bug #27276 in r2924.

to separate test file that doesn't permit mysqld embedded in 
mysqltest.

Also, fix different comment handling in a incorrect new-to-5.1 
test.

  to wrong results
      
3 problems found with DES_ENCRYPT/DES_DECRYPT :

1. The max length was not calculated properly. Fixed in fix_length_and_dec()
2. DES_ENCRYPT had a side effect of sometimes reallocating and changing 
the value of its argument. Fixed by explicitly pre-allocating the necessary
space to pad the argument with trailing '*' (stars) when calculating the 
DES digest.
3. in DES_ENCRYPT the string buffer for the result value was not 
reallocated to the correct size and only string length was assigned to it. 
Fixed by making sure there's enough space to hold the result.

information schema tables are based on internal tmp tables which are removed
after each statement execution. So HANDLER comands can not be used with
information schema.


mysql-test/r/handler.result:
  test result
mysql-test/t/handler.test:
  test case
sql/sql_handler.cc:
  information schema tables are based on internal tmp tables which are removed
  after each statement execution. So HANDLER comands can not be used with
  information schema.

        using it.
The crash was due to a null pointer present for select_lex while 
processing the view.
Adding a check while opening the view to see if its a child of a 
merge table fixed this problem.

mysql-test/r/merge.result:
  Updated result for the new test case.
mysql-test/t/merge.test:
  Added test case based on the bug description.
sql/sql_base.cc:
  Added a check to check if the view being opened is a child table of a
  merge table and return error if it is.

Streamlined how we increase the size of our test table.
The new method shows run time decreased by ~60%.
This is not a guarantee that we will not see test timeouts (the random failures noted in the bug),
but it should significantly reduce the chances of this occurring.

1) BUG#43660 - SHOW INDEXES/ANALYZE does NOT update cardinality 
               for indexes of InnoDB table

Detailed revision comments:

r4699 | vasil | 2009-04-09 14:01:52 +0300 (Thu, 09 Apr 2009) | 15 lines
branches/5.1:

Fix Bug#43660 SHOW INDEXES/ANALYZE does NOT update cardinality for indexes
of InnoDB table

by replacing the PRNG that is used to pick random pages with a better
one.

This is based on r4670 but also adds a new configuration option and
enables the fix only if this option is changed. Please skip the present
revision when merging.

Approved by:	Heikki (via email)

1) BUG#43309 - Test main.innodb can't be run twice

2) Follow up fix for BUG#43309, adds explanatory comments.

Detailed revision comments:

r4575 | vasil | 2009-03-30 15:55:31 +0300 (Mon, 30 Mar 2009) | 8 lines
branches/5.1:

Fix Bug#43309 Test main.innodb can't be run twice

Make the innodb mysql-test more flexible by inspecting how much a
variable of interest has changed since the start of the test. Do not
assume the variables have zero values at the start of the test.

r4659 | vasil | 2009-04-06 15:34:51 +0300 (Mon, 06 Apr 2009) | 6 lines
branches/5.1:

Followup to r4575 and the fix of Bug#43309 Test main.innodb can't be run twice:

Add an explanatory comment, as suggested by Patrick Crews in the bug report.

problems

1) BUG#39320 - innodb crash in file btr/btr0pcur.c line 217 with 
               innodb_locks_unsafe_for_binlog

2) Fixes bug in multi-table semi consistent reads.

3) Fixes email address from dev@innodb.com to innodb_dev_ww@oracle.com

4) Fixes warning message generated by main.innodb test


Detailed revision comments:

r4399 | marko | 2009-03-12 09:38:05 +0200 (Thu, 12 Mar 2009) | 5 lines
branches/5.1: row_sel_get_clust_rec_for_mysql(): Store the cursor position
also for unlock_row().  (Bug #39320)

rb://96 approved by Heikki Tuuri.

r4400 | marko | 2009-03-12 10:06:44 +0200 (Thu, 12 Mar 2009) | 8 lines
branches/5.1: Fix a bug in multi-table semi-consistent reads.
Remember the acquired record locks per table handle (row_prebuilt_t)
rather than per transaction (trx_t), so that unlock_row should successfully
unlock all non-matching rows in multi-table operations.
This deficiency was found while investigating Bug #39320.

rb://94 approved by Heikki Tuuri.

r4481 | marko | 2009-03-19 15:01:48 +0200 (Thu, 19 Mar 2009) | 6 lines
branches/5.1: row_unlock_for_mysql(): Do not unlock records that were
modified by the current transaction.  This bug was introduced or unmasked
in r4400.

rb://97 approved by Heikki Tuuri

r4573 | vasil | 2009-03-30 14:17:13 +0300 (Mon, 30 Mar 2009) | 4 lines
branches/5.1:

Fix email address from dev@innodb.com to innodb_dev_ww@oracle.com

r4574 | vasil | 2009-03-30 14:27:08 +0300 (Mon, 30 Mar 2009) | 38 lines
branches/5.1:

Restore the state of INNODB_THREAD_CONCURRENCY to silence this warning:

  TEST                                      RESULT   TIME (ms)
  ------------------------------------------------------------
  
  worker[1] Using MTR_BUILD_THREAD 250, with reserved ports 12500..12509
  main.innodb                              [ pass ]   8803
  
  MTR's internal check of the test case 'main.innodb' failed.
  This means that the test case does not preserve the state that existed
  before the test case was executed.  Most likely the test case did not
  do a proper clean-up.
  This is the diff of the states of the servers before and after the
  test case was executed:
  mysqltest: Logging to '/tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.log'.
  mysqltest: Results saved in '/tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result'.
  mysqltest: Connecting to server localhost:12500 (socket /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/mysqld.1.sock) as 'root', connection 'default', attempt 0 ...
  mysqltest: ... Connected.
  mysqltest: Start processing test commands from './include/check-testcase.test' ...
  mysqltest: ... Done processing test commands.
  --- /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result	2009-03-30 14:12:31.000000000 +0300
  +++ /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.reject	2009-03-30 14:12:41.000000000 +0300
  @@ -99,7 +99,7 @@
   INNODB_SUPPORT_XA	ON
   INNODB_SYNC_SPIN_LOOPS	20
   INNODB_TABLE_LOCKS	ON
  -INNODB_THREAD_CONCURRENCY	8
  +INNODB_THREAD_CONCURRENCY	16
   INNODB_THREAD_SLEEP_DELAY	10000
   INSERT_ID	0
   INTERACTIVE_TIMEOUT	28800
  
  mysqltest: Result content mismatch
  
  not ok

r4576 | vasil | 2009-03-30 16:25:10 +0300 (Mon, 30 Mar 2009) | 4 lines
branches/5.1:

Revert a change to Makefile.am that I committed accidentally in c4574.

The test case was missing "let $slave_sql_errno= 1594;".

fixed message for 'help' command


client/mysql.cc:
  fixed message for 'help' command

The problem was that new lock types were being added without a
corresponding description. Since the lock types (enum values)
are used as indices to the description array, the descriptions
could be shifted depending on the lock type. The solution is to
ensure that every lock type has a correspondent description.

include/thr_lock.h:
  Add warning.
sql/sql_test.cc:
  Update lock descriptions.

            Engine doesn't allow me to.

In case of incompatible changes between old and new table
versions, the mysqlcheck program prints error messages like
this:
  error: Table upgrade required. Please do
         "REPAIR TABLE `table_name`" to fix it!

However, InnoDB doesn't support REPAIR TABLE query, so the
message is confusing.


Error message text has been changed to:

  Table upgrade required. Please do "REPAIR TABLE `table_name`"
  or dump/reload to fix it!"


mysql-test/r/repair.result:
  Updated test case for bug #42563.
mysql-test/r/varbinary.result:
  Updated test case for bug #42563.
sql/share/errmsg.txt:
  Bug #42563: Message tells me to repair table though Storage
              Engine doesn't allow me to.
  
  The ER_TABLE_NEEDS_UPGRADE error message has been changed to:
  
    Table upgrade required. Please do "REPAIR TABLE ``%-.32s`"
    or dump/reload to fix it!"

The current patch

-- Adds the ibmdb2i suite
-- related include(.inc) files
-- tests for Bug#44020 and Bug#44025

mysql_rename_view can not rename view if database is not the same.
The fix is to add new argument 'new_db' to mysql_rename_view() and
allow rename with different databases
(only for ALTER DATABASE ... UPGRADE DATA DIRECTORY NAME).


mysql-test/t/upgrade.test:
  test fix
sql/parse_file.cc:
  mysql_rename_view can not rename view if database is not the same.
  The fix is to add new argument 'new_db' to mysql_rename_view() and
  allow rename with different databases
  (only for ALTER DATABASE ... UPGRADE DATA DIRECTORY NAME).
sql/parse_file.h:
  mysql_rename_view can not rename view if database is not the same.
  The fix is to add new argument 'new_db' to mysql_rename_view() and
  allow rename with different databases
  (only for ALTER DATABASE ... UPGRADE DATA DIRECTORY NAME).
sql/sql_rename.cc:
  mysql_rename_view can not rename view if database is not the same.
  The fix is to add new argument 'new_db' to mysql_rename_view() and
  allow rename with different databases
  (only for ALTER DATABASE ... UPGRADE DATA DIRECTORY NAME).
sql/sql_view.cc:
  mysql_rename_view can not rename view if database is not the same.
  The fix is to add new argument 'new_db' to mysql_rename_view() and
  allow rename with different databases
  (only for ALTER DATABASE ... UPGRADE DATA DIRECTORY NAME).
sql/sql_view.h:
  mysql_rename_view can not rename view if database is not the same.
  The fix is to add new argument 'new_db' to mysql_rename_view() and
  allow rename with different databases
  (only for ALTER DATABASE ... UPGRADE DATA DIRECTORY NAME).