to install system tables directly from the source tree (useful for
testing purposes).  This helps clean the script up a lot and clarify
the three possible ways the script can be called (using compiled-in
paths, passing --basedir pointing to alternative install location,
or --srcdir).  Include further tidying as well.
  
This fixes bug#30759.


scripts/mysql_install_db.sh:
  Re-order the logic in printing messages at the end of the
  script, to make it clearer which paths are taken depending
  on tests or outcome of command status.  Tidy some output.

The following bugs are fixed:

Bug #31860: Server crashes after inserting into InnoDB table with auto_increment column
  In the Bug 16979 fix there was an erroneous assertion that
  autoincrement columns can't contain negative values. With the fix, the
  autoincrement table counter is set to 0 if the maximum value read from
  the autoinc column index is negative.


mysql-test/r/innodb.result:
  Apply snapshot innodb-5.1-ss2034
  
  Revision r2034:
  Fix for Bug# 31860, in the Bug 16979 fix there was an erroneous assertion that
  autoincrement columns can't contain negative values. With the fix, the
  autoincrement table counter is set to 0 if the maximum value read from
  the autoinc column index is negative.
  
  Add test for the bug fix but the test is not really useful as the server
  needs to be restarted half way through the test. It has been added for 
  reference only.
mysql-test/t/innodb.test:
  Apply snapshot innodb-5.1-ss2034
  
  Revision r2034:
  Fix for Bug# 31860, in the Bug 16979 fix there was an erroneous assertion that
  autoincrement columns can't contain negative values. With the fix, the
  autoincrement table counter is set to 0 if the maximum value read from
  the autoinc column index is negative.
  
  Add test for the bug fix but the test is not really useful as the server
  needs to be restarted half way through the test. It has been added for 
  reference only.
storage/innobase/handler/ha_innodb.cc:
  Apply snapshot innodb-5.1-ss2034
  
  Revision r2017:
  Use "InnoDB:" prefix in error messages.
  
  
  Revision r2018:
  Remove ut_print_timestamp(), this should have been removed when the following
  changes were made by MySQL.
  
  	ChangeSet@1.1810.467.1  2005-08-11 19:19:20+03:00  jani@omakaista.fi
  
  Fix error message so that it conforms to "  InnoDB: Error: ...".
storage/innobase/include/univ.i:
  Apply snapshot innodb-5.1-ss2034
  
  Revision r2015:
  UNIV_MEM_ASSERT_RW(), UNIV_MEM_ASSERT_W(): Remove warnings on 64-bit systems.
storage/innobase/row/row0sel.c:
  Apply snapshot innodb-5.1-ss2034
  
  Revision r2034:
  Fix for Bug# 31860, in the Bug 16979 fix there was an erroneous assertion that
  autoincrement columns can't contain negative values. With the fix, the
  autoincrement table counter is set to 0 if the maximum value read from
  the autoinc column index is negative.
  
  Add test for the bug fix but the test is not really useful as the server
  needs to be restarted half way through the test. It has been added for 
  reference only.
storage/innobase/sync/sync0sync.c:
  Apply snapshot innodb-5.1-ss2034
  
  Revision r2017:
  Use "InnoDB:" prefix in error messages.

Fixes the following bugs:

Bug #30706: SQL thread on slave is allowed to block client queries when slave load is high
  Add (innodb|innobase|srv)_replication_delay MySQL config parameter.

Bug #30888: Innodb table + stored procedure + row deletion = server crash
  While adding code for the low level read of the AUTOINC value from the index,
  the case for MEDIUM ints which are 3 bytes was missed triggering an
  assertion.

Bug #30907: Regression: "--innodb_autoinc_lock_mode=0" (off) not same as older releases
  We don't rely on *first_value to be 0 when checking whether
  get_auto_increment() has been invoked for the first time in a multi-row
  INSERT. We instead use trx_t::n_autoinc_rows. Initialize trx::n_autoinc_rows
  inside ha_innobase::start_stmt() too.

Bug #31444: "InnoDB: Error: MySQL is freeing a thd" in innodb_mysql.test
  ha_innobase::external_lock(): Update prebuilt->mysql_has_locked and
  trx->n_mysql_tables_in_use only after row_lock_table_for_mysql() returns
  DB_SUCCESS.  A timeout on LOCK TABLES would lead to an inconsistent state,
  which would cause trx_free() to print a warning.

Bug #31494: innodb + 5.1 + read committed crash, assertion
  Set an error code when a deadlock occurs in semi-consistent read.


mysql-test/r/innodb.result:
  Apply snapshot innodb-5.1-ss1989
  
  Also, a test is moved into the new innodb_autoinc_lock_mode_zero
  test, because it depends on a non-default setting for a read-only
  variable.
  
  Revision r1821:
  Merge a change from MySQL AB:
  
  ChangeSet@1.2536.50.1  2007-08-02 12:45:56-07:00  igor@mysql.com
  
  Fixed bug#28404.
  This patch adds cost estimation for the queries with ORDER BY / GROUP BY
  and LIMIT.
  If there was a ref/range access to the table whose rows were required
  to be ordered in the result set the optimizer always employed this access
  though a scan by a different index that was compatible with the required
  order could be cheaper to produce the first L rows of the result set.
  Now for such queries the optimizer makes a choice between the cheapest
  ref/range accesses not compatible with the given order and index scans
  compatible with it.
  
  innodb.result: Adjusted results for test cases affected fy the fix for
  bug #28404.
  
  
  Revision r1781:
  Fix a test case that was broken after Bug#16979 fix. See r1645 and r1735.
  The variable used in the tests below was introduced in r1735.
  
  
  Revision r1792:
  innodb.result: Revert r1655, which should have been reverted as part of r1781.
  
  
  Revision r1843:
  Add test for Bug# 21409, the actual bug was fixed in r1334.
mysql-test/t/innodb.test:
  Apply snapshot innodb-5.1-ss1989
  
  Also, a test is moved into the new innodb_autoinc_lock_mode_zero
  test, because it depends on a non-default setting for a read-only
  variable.
  
  Revision r1781:
  Fix a test case that was broken after Bug#16979 fix. See r1645 and r1735.
  The variable used in the tests below was introduced in r1735.
  
  
  Revision r1843:
  Add test for Bug# 21409, the actual bug was fixed in r1334.
storage/innobase/buf/buf0lru.c:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1819:
  Merge r1815:1817 from branches/zip: Improve Valgrind instrumentation.
  
  UNIV_MEM_ASSERT_RW(): New macro, to check that the contents of a memory
  area is defined.
  
  UNIV_MEM_ASSERT_W(): New macro, to check that a memory area is writable.
  
  UNIV_MEM_ASSERT_AND_FREE(): New macro, to check that the memory is
  writable before declaring it free (unwritable).  This replaces UNIV_MEM_FREE()
  in many places.
  
  mem_init_buf(): Check that the memory is writable, and declare it undefined.
  
  mem_erase_buf(): Check that the memory is writable, and declare it freed.
storage/innobase/dict/dict0dict.c:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1894:
  Add debug lock checks to autoinc functions. Add lock guards around an
  invocation of dict_table_autoinc_initialize().
storage/innobase/dict/dict0load.c:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1974:
  Prevent loading of tables that have unsupported features most notably
  FTS indexes.
storage/innobase/handler/ha_innodb.cc:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1850:
  Implement this feature request:
  http://bugs.mysql.com/30706
  
  * Add a function that returns the number of microseconds since
    epoch - ut_time_us().
  
  * Add (innodb|innobase|srv)_replication_delay MySQL config parameter.
  
  * Add UT_WAIT_FOR() macro that waits for a specified condition to occur
    until a timeout elapses.
  
  * Using all of the above, handle the replication thread specially in
    srv_conc_enter_innodb().
  
  Approved by:	Heikki
  
  
  
  Revision r1887:
  Merge changes from MySQL AB:
  
  ChangeSet@1.2528.115.25  2007-08-27 18:18:14-06:00  tsmith@hindu.god
  
  Fix some Windows compiler warnings.
  
  dict0mem.c: Fix compiler warning with a cast.
  
  ha_innodb.cc: Change type to fix a compiler warning.
  
  
  Revision r1809:
  ha_innobase::external_lock(): Update prebuilt->mysql_has_locked and
  trx->n_mysql_tables_in_use only after row_lock_table_for_mysql()
  returns DB_SUCCESS.  A timeout on LOCK TABLES would lead to an
  inconsistent state, which would cause trx_free() to print a warning.
  
  This was later reported as Bug #31444.
  
  
  Revision r1833:
  Add /*== ... === */ decoration that was missing around some auto-inc functions.
  Add a missing comment, fix the length of a decoration.  Initialize the *value
  out parameter in ha_innobase::innobase_get_auto_increment().
  
  
  Revision r1866:
  Revert r1850 as MySQL did not approve the addition.
  
  log for r1850:
  
  Implement this feature request:
  http://bugs.mysql.com/30706
  
  * Add a function that returns the number of microseconds since
    epoch - ut_time_us().
  
  * Add (innodb|innobase|srv)_replication_delay MySQL config parameter.
  
  * Add UT_WAIT_FOR() macro that waits for a specified condition to occur
    until a timeout elapses.
  
  * Using all of the above, handle the replication thread specially in
    srv_conc_enter_innodb().
  
  
  Revision r1846:
  Add config option innodb_use_adaptive_hash_indexes to enable/disable
  adaptive hash indexes. It is enabled by default (no change in default
  behavior).
  
  Approved by:	Marko
  
  
  Revision r1974:
  Prevent loading of tables that have unsupported features most notably
  FTS indexes.
  
  
  Revision r1829:
  Add assertion to enforce check of an implicit invariant and add comment about
  retry of autoinc read semantics. We always reread the table's autoinc counter
  after attempting to initialize it i.e., we want to guarantee that a read of
  autoinc valus that is returned to the caller is always covered by the
  AUTOINC locking mechanism.
  
  
  Revision r1787:
  Move the prototype of innobase_print_identifier() from ut0ut.c to
  ha_prototypes.h.  Enclose the definitions in ha_prototypes.h in
  #ifndef UNIV_HOTBACKUP.
  
  
  Revision r1888:
  Merge a change from MySQL AB:
  
  ChangeSet@1.2528.115.30  2007-08-28 10:17:15-06:00  tsmith@hindu.god
  
  Fix another compiler warning on Windows in InnoDB.
  
  ha_innodb.cc:
  
  Fix compiler warning: ::get_auto_increment takes a ulonglong
  for nb_desired_values, but InnoDB's trx struct stores it as
  a ulint (unsigned long).  Probably harmless, as a single
  statement won't be asking for more than 2^32 rows.
  
  
  Revision r1987:
  Bug fix: The problem was that when write_row() attempted to update the max
  autoinc value, and if it was rolled back because of a deadlock, the 
  deadlock error (transaction rollback) was not being propagated back to MySQL.
  
  
  Revision r1889:
  Merge a change from MySQL AB:
  
  ChangeSet@1.2560  2007-09-21 10:15:16+02:00  gkodinov@local
  
  ha_innodb.cc: fixed type conversion warnings revealed by bug 30639 
  
  
  Revision r1989:
  Suppress printing of deadlock errors while reading the autoinc value.
  DB_DEADLOCK errors are part of normal processing and excessive printing
  of these error messages could be disconcerting for users. 
  
  
  Revision r1828:
  Fix two bugs:
  
  Bug# 30907: We don't rely on *first_value to be 0 when checking whether
  get_auto_increment() has been invoked for the first time in a multi-row
  INSERT. We instead use trx_t::n_autoinc_rows. Initialize trx::n_autoinc_rows
  inside ha_innobase::start_stmt() too.
  
  Bug# 30888: While adding code for the low level read of the AUTOINC value
  from the index, the case for MEDIUM ints which are 3 bytes was missed
  triggering an assertion.
storage/innobase/handler/ha_innodb.h:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1844:
  Remove the prototypes of some functions inside #if 0.
  The function definitions were removed in r1746.
storage/innobase/ibuf/ibuf0ibuf.c:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1965:
  ibuf_insert_to_index_page(): Fix typos in diagnostic output.
storage/innobase/include/db0err.h:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1974:
  Prevent loading of tables that have unsupported features most notably
  FTS indexes.
storage/innobase/include/ha_prototypes.h:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1787:
  Move the prototype of innobase_print_identifier() from ut0ut.c to
  ha_prototypes.h.  Enclose the definitions in ha_prototypes.h in
  #ifndef UNIV_HOTBACKUP.
storage/innobase/include/mach0data.h:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1779:
  Fix a bug that handles the case where the host specific byte order matches
  the InnoDB storage byte order, which is big-endian.
storage/innobase/include/mach0data.ic:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1779:
  Fix a bug that handles the case where the host specific byte order matches
  the InnoDB storage byte order, which is big-endian.
storage/innobase/include/mem0dbg.h:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1830:
  Improve memory debugging.  This is follow-up to r1819.
  
  mem_heap_validate(): Compile this function also if UNIV_MEM_DEBUG is
  defined.  Previously, this function was only compiled with UNIV_DEBUG.
  
  mem_heap_free_heap_top(): Flag the memory allocated, not freed, for
  Valgrind.  Otherwise, Valgrind would complain on the second call of
  mem_heap_empty().
  
  UNIV_MEM_ASSERT_RW(), UNIV_MEM_ASSERT_W(): Display additional diagnostics
  for failed Valgrind checks.
storage/innobase/include/mem0mem.ic:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1830:
  Improve memory debugging.  This is follow-up to r1819.
  
  mem_heap_validate(): Compile this function also if UNIV_MEM_DEBUG is
  defined.  Previously, this function was only compiled with UNIV_DEBUG.
  
  mem_heap_free_heap_top(): Flag the memory allocated, not freed, for
  Valgrind.  Otherwise, Valgrind would complain on the second call of
  mem_heap_empty().
  
  UNIV_MEM_ASSERT_RW(), UNIV_MEM_ASSERT_W(): Display additional diagnostics
  for failed Valgrind checks.
  
  
  Revision r1937:
  mem_heap_free_top(): Remove a bogus Valgrind warning.
  
  
  Revision r1819:
  Merge r1815:1817 from branches/zip: Improve Valgrind instrumentation.
  
  UNIV_MEM_ASSERT_RW(): New macro, to check that the contents of a memory
  area is defined.
  
  UNIV_MEM_ASSERT_W(): New macro, to check that a memory area is writable.
  
  UNIV_MEM_ASSERT_AND_FREE(): New macro, to check that the memory is
  writable before declaring it free (unwritable).  This replaces UNIV_MEM_FREE()
  in many places.
  
  mem_init_buf(): Check that the memory is writable, and declare it undefined.
  
  mem_erase_buf(): Check that the memory is writable, and declare it freed.
storage/innobase/include/rem0rec.ic:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1918:
  Improve Valgrind instrumentation.
  
  rec_offs_set_n_alloc(): Use UNIV_MEM_ASSERT_AND_ALLOC().
  
  UNIV_MEM_ASSERT_AND_ALLOC(): New directive, similar to
  UNIV_MEM_ASSERT_AND_FREE().
storage/innobase/include/row0mysql.h:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1783:
  Correct the function comments of row_create_table_for_mysql() and
  row_drop_table_for_mysql().
storage/innobase/include/sync0rw.h:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1757:
  Enclose rw_lock_validate() in #ifdef UNIV_DEBUG.  It is only called by
  debug assertions.
storage/innobase/include/univ.i:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1827:
  Merge r1826 from branches/zip: UNIV_MEM_ASSERT_AND_FREE():
  Use UNIV_MEM_ASSERT_W() instead of UNIV_MEM_ASSERT_RW().
  The memory area need not be initialized.
  This mistake was made in r1815.
  
  
  Revision r1918:
  Improve Valgrind instrumentation.
  
  rec_offs_set_n_alloc(): Use UNIV_MEM_ASSERT_AND_ALLOC().
  
  UNIV_MEM_ASSERT_AND_ALLOC(): New directive, similar to
  UNIV_MEM_ASSERT_AND_FREE().
  
  
  Revision r1830:
  Improve memory debugging.  This is follow-up to r1819.
  
  mem_heap_validate(): Compile this function also if UNIV_MEM_DEBUG is
  defined.  Previously, this function was only compiled with UNIV_DEBUG.
  
  mem_heap_free_heap_top(): Flag the memory allocated, not freed, for
  Valgrind.  Otherwise, Valgrind would complain on the second call of
  mem_heap_empty().
  
  UNIV_MEM_ASSERT_RW(), UNIV_MEM_ASSERT_W(): Display additional diagnostics
  for failed Valgrind checks.
  
  
  Revision r1819:
  Merge r1815:1817 from branches/zip: Improve Valgrind instrumentation.
  
  UNIV_MEM_ASSERT_RW(): New macro, to check that the contents of a memory
  area is defined.
  
  UNIV_MEM_ASSERT_W(): New macro, to check that a memory area is writable.
  
  UNIV_MEM_ASSERT_AND_FREE(): New macro, to check that the memory is
  writable before declaring it free (unwritable).  This replaces UNIV_MEM_FREE()
  in many places.
  
  mem_init_buf(): Check that the memory is writable, and declare it undefined.
  
  mem_erase_buf(): Check that the memory is writable, and declare it freed.
  
  
  Revision r1948:
  UNIV_MEM_ASSERT_RW(), UNIV_MEM_ASSERT_W(): Display also __FILE__ and __LINE__
  when these Valgrind checks fail.
storage/innobase/include/ut0ut.h:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1850:
  Implement this feature request:
  http://bugs.mysql.com/30706
  
  * Add a function that returns the number of microseconds since
    epoch - ut_time_us().
  
  * Add (innodb|innobase|srv)_replication_delay MySQL config parameter.
  
  * Add UT_WAIT_FOR() macro that waits for a specified condition to occur
    until a timeout elapses.
  
  * Using all of the above, handle the replication thread specially in
    srv_conc_enter_innodb().
  
  Approved by:	Heikki
  
  
  
  Revision r1862:
  Add ut_snprintf() function. On Windows this needs to be implemented
  using auxiliary functions because there is no snprintf-variant on
  Windows that behaves exactly as specified in the standard:
  
  * Always return the number of characters that would have been printed
    if the size were unlimited (not including the final `\0').
  * Always '\0'-terminate the result
  * Do not touch the buffer if size=0, only return the number of characters
    that would have been printed. Can be used to estimate the size needed
    and to allocate it dynamically.
  
  See http://www.freebsd.org/cgi/query-pr.cgi?pr=87260 for the reason why
  2 ap variables are used.
  
  Approved by:	Heikki
  
  
  Revision r1866:
  Revert r1850 as MySQL did not approve the addition.
  
  log for r1850:
  
  Implement this feature request:
  http://bugs.mysql.com/30706
  
  * Add a function that returns the number of microseconds since
    epoch - ut_time_us().
  
  * Add (innodb|innobase|srv)_replication_delay MySQL config parameter.
  
  * Add UT_WAIT_FOR() macro that waits for a specified condition to occur
    until a timeout elapses.
  
  * Using all of the above, handle the replication thread specially in
    srv_conc_enter_innodb().
storage/innobase/mem/mem0dbg.c:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1830:
  Improve memory debugging.  This is follow-up to r1819.
  
  mem_heap_validate(): Compile this function also if UNIV_MEM_DEBUG is
  defined.  Previously, this function was only compiled with UNIV_DEBUG.
  
  mem_heap_free_heap_top(): Flag the memory allocated, not freed, for
  Valgrind.  Otherwise, Valgrind would complain on the second call of
  mem_heap_empty().
  
  UNIV_MEM_ASSERT_RW(), UNIV_MEM_ASSERT_W(): Display additional diagnostics
  for failed Valgrind checks.
  
  
  Revision r1819:
  Merge r1815:1817 from branches/zip: Improve Valgrind instrumentation.
  
  UNIV_MEM_ASSERT_RW(): New macro, to check that the contents of a memory
  area is defined.
  
  UNIV_MEM_ASSERT_W(): New macro, to check that a memory area is writable.
  
  UNIV_MEM_ASSERT_AND_FREE(): New macro, to check that the memory is
  writable before declaring it free (unwritable).  This replaces UNIV_MEM_FREE()
  in many places.
  
  mem_init_buf(): Check that the memory is writable, and declare it undefined.
  
  mem_erase_buf(): Check that the memory is writable, and declare it freed.
storage/innobase/mem/mem0mem.c:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1819:
  Merge r1815:1817 from branches/zip: Improve Valgrind instrumentation.
  
  UNIV_MEM_ASSERT_RW(): New macro, to check that the contents of a memory
  area is defined.
  
  UNIV_MEM_ASSERT_W(): New macro, to check that a memory area is writable.
  
  UNIV_MEM_ASSERT_AND_FREE(): New macro, to check that the memory is
  writable before declaring it free (unwritable).  This replaces UNIV_MEM_FREE()
  in many places.
  
  mem_init_buf(): Check that the memory is writable, and declare it undefined.
  
  mem_erase_buf(): Check that the memory is writable, and declare it freed.
storage/innobase/row/row0mysql.c:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1786:
  row_create_table_for_mysql(), row_truncate_table_for_mysql(),
  row_drop_table_for_mysql(): Do not mention innodb_force_recovery
  when newraw is set.
  
  
  Revision r1790:
  row_drop_table_for_mysql(): Before calling
  dict_table_remove_from_cache(table) and thus freeing the memory
  allocated for the table, copy the table name.  This avoids reading
  freed memory when name == table->name.
  
  Approved by Sunny.
  
  
  Revision r1783:
  Correct the function comments of row_create_table_for_mysql() and
  row_drop_table_for_mysql().
  
  
  Revision r1894:
  Add debug lock checks to autoinc functions. Add lock guards around an
  invocation of dict_table_autoinc_initialize().
storage/innobase/row/row0sel.c:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1782:
  Add comment that the variable dest should be word aligned. After discussion
  on IM with Heikki.
  
  
  Revision r1988:
  Set an error code when a deadlock occurs in semi-consistent read.  (Bug #31494)
  
  innodb-semi-consistent: New tests for InnoDB semi-consistent reads.
  Unfortunately, these will not trigger Bug #31494, because there merely
  occur lock wait timeouts, not deadlocks.
  
  
  Revision r1820:
  Use the clustered index and not the one selected by the optimizer in the plan,
  when building a previous version of the row. This bug is triggered when
  running queries via InnoDB's internal SQL parser; when InnoDB's optimizer
  selects a secondary index for the plan.
  
  
  Revision r1828:
  Fix two bugs:
  
  Bug# 30907: We don't rely on *first_value to be 0 when checking whether
  get_auto_increment() has been invoked for the first time in a multi-row
  INSERT. We instead use trx_t::n_autoinc_rows. Initialize trx::n_autoinc_rows
  inside ha_innobase::start_stmt() too.
  
  Bug# 30888: While adding code for the low level read of the AUTOINC value
  from the index, the case for MEDIUM ints which are 3 bytes was missed
  triggering an assertion.
  
  
  Revision r1779:
  Fix a bug that handles the case where the host specific byte order matches
  the InnoDB storage byte order, which is big-endian.
storage/innobase/sync/sync0rw.c:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1757:
  Enclose rw_lock_validate() in #ifdef UNIV_DEBUG.  It is only called by
  debug assertions.
storage/innobase/ut/ut0ut.c:
  Apply snapshot innodb-5.1-ss1989
  
  Revision r1850:
  Implement this feature request:
  http://bugs.mysql.com/30706
  
  * Add a function that returns the number of microseconds since
    epoch - ut_time_us().
  
  * Add (innodb|innobase|srv)_replication_delay MySQL config parameter.
  
  * Add UT_WAIT_FOR() macro that waits for a specified condition to occur
    until a timeout elapses.
  
  * Using all of the above, handle the replication thread specially in
    srv_conc_enter_innodb().
  
  Approved by:	Heikki
  
  
  
  Revision r1873:
  snprintf() should always return non-negative result. According to
  Microsoft documentation about _vscprintf():
  
    If format is a null pointer, the invalid parameter handler is invoked,
    as described in Parameter Validation. If execution is allowed to
    continue, the functions return -1 and set errno to EINVAL.
  
  The UNIX variant of snprintf() segfaults if format is a NULL pointer
  (similar to strlen(NULL) for example), so it is better to conform to
  this behavior and crash our custom Windows version instead of
  returning -1. Noone would expect -1 to be returned from snprintf().
  
  Cosmetic: Add a space after typecast.
  
  Approved by:	Marko
  
  
  Revision r1862:
  Add ut_snprintf() function. On Windows this needs to be implemented
  using auxiliary functions because there is no snprintf-variant on
  Windows that behaves exactly as specified in the standard:
  
  * Always return the number of characters that would have been printed
    if the size were unlimited (not including the final `\0').
  * Always '\0'-terminate the result
  * Do not touch the buffer if size=0, only return the number of characters
    that would have been printed. Can be used to estimate the size needed
    and to allocate it dynamically.
  
  See http://www.freebsd.org/cgi/query-pr.cgi?pr=87260 for the reason why
  2 ap variables are used.
  
  Approved by:	Heikki
  
  
  Revision r1866:
  Revert r1850 as MySQL did not approve the addition.
  
  log for r1850:
  
  Implement this feature request:
  http://bugs.mysql.com/30706
  
  * Add a function that returns the number of microseconds since
    epoch - ut_time_us().
  
  * Add (innodb|innobase|srv)_replication_delay MySQL config parameter.
  
  * Add UT_WAIT_FOR() macro that waits for a specified condition to occur
    until a timeout elapses.
  
  * Using all of the above, handle the replication thread specially in
    srv_conc_enter_innodb().
  
  
  Revision r1787:
  Move the prototype of innobase_print_identifier() from ut0ut.c to
  ha_prototypes.h.  Enclose the definitions in ha_prototypes.h in
  #ifndef UNIV_HOTBACKUP.
  
  
  Revision r1789:
  ut_print_namel(): Do not assume that all '/' are separators between
  database and table names.
  
  Approved by Heikki.
  
  
  Revision r1936:
  ut_print_buf(): Add a Valgrind check that the buffer is wholly defined.
mysql-test/r/innodb-semi-consistent.result:
  Apply snapshot innodb-5.1-ss1989
  
  
  Revision r1988:
  Set an error code when a deadlock occurs in semi-consistent read.  (Bug #31494)
  
  innodb-semi-consistent: New tests for InnoDB semi-consistent reads.
  Unfortunately, these will not trigger Bug #31494, because there merely
  occur lock wait timeouts, not deadlocks.
mysql-test/r/innodb_autoinc_lock_mode_zero.result:
  New test, using read-only setting --innodb-autoinc-lock-mode=0
mysql-test/t/innodb-semi-consistent-master.opt:
  Apply snapshot innodb-5.1-ss1989
  
  
  Revision r1988:
  Set an error code when a deadlock occurs in semi-consistent read.  (Bug #31494)
  
  innodb-semi-consistent: New tests for InnoDB semi-consistent reads.
  Unfortunately, these will not trigger Bug #31494, because there merely
  occur lock wait timeouts, not deadlocks.
mysql-test/t/innodb-semi-consistent.test:
  Apply snapshot innodb-5.1-ss1989
  
  
  Revision r1988:
  Set an error code when a deadlock occurs in semi-consistent read.  (Bug #31494)
  
  innodb-semi-consistent: New tests for InnoDB semi-consistent reads.
  Unfortunately, these will not trigger Bug #31494, because there merely
  occur lock wait timeouts, not deadlocks.
mysql-test/t/innodb_autoinc_lock_mode_zero-master.opt:
  New test, using read-only setting --innodb-autoinc-lock-mode=0
mysql-test/t/innodb_autoinc_lock_mode_zero.test:
  New test, using read-only setting --innodb-autoinc-lock-mode=0

into  production.mysql.com:/usersnfs/jperkin/bk/build/5.1


support-files/mysql.server.sh:
  Auto merged

usually caused by a bad basedir setting.


support-files/mysql.server.sh:
  Be more verbose in error message.

- This workaround is no longer necessary with cmake 2.4.7.


sql/CMakeLists.txt:
  Bug#31217 C1033 compilation error on Windows
  - Remove workaround no longer needed.

into  alf.(none):/src/bug31319/my51-bug31319


CMakeLists.txt:
  Auto merged

- Add check

into  four.local.lan:/WORK/mysql-5.1-build/src-clean


mysql-test/t/type_datetime.test:
  Auto merged

into  four.local.lan:/WORK/mysql-5.0-build/src-clean


mysql-test/t/type_datetime.test:
  Auto merged

into  four.local.lan:/WORK2/merge/mysql-5.1-31408


mysql-test/t/type_datetime.test:
  Auto merged

   Bug#29290 type_datetime.test failure in 5.1


mysql-test/t/type_datetime.test:
  - If we are too close to midnight sleep till we reach 
    at least midnight + 1 second.
  - Replace error numbers with error names.

into  mysql.com:/home/kent/bk/bug24809/mysql-5.1-build


cmd-line-utils/libedit/Makefile.am:
  Auto merged

  Ensure use of libedit "config.h" by adding "-I. -I$(srcdir)" to DEFS,
  work around for problem with automake 1.10 (bug#24809)


cmd-line-utils/libedit/Makefile.am:
  Ensure use of libedit "config.h" by adding "-I. -I$(srcdir)" to DEFS,
  work around for problem with automake 1.10 (bug#24809)

1) Add a new top level "Makefile.am" target "make embedded-test".

2) Fix a syntax error (bad merge) in "netware/Makefile.am".


Makefile.am:
  Add a new "make" target "embedded-test" so that it is easier 
  to test the "embedded server" ("libmyslqd").
  Make it "phony".
  
  Use it via a sub-make within "test-bt" to avoid code duplication.
netware/Makefile.am:
  Cleanup: Macros "BUILT_SOURCES" and "CLEANFILES" should be defined only once.

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.1-build

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.1-build


mysql-test/mysql-test-run.pl:
  Auto merged

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.0-build

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.1-build

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.1-build-work


mysql-test/mysql-test-run.pl:
  Auto merged

into  trift2.:/MySQL/M51/push-5.1

  After review changes


BUILD/autorun.sh:
  After review changes

  Removed innobase from compile-dist, and let it use autorun.sh to avoid
  code duplication. Also corrected a problem when searching for one of
  "libtoolize" and "glibtoolize", now it honors the PATH setting (Bug#31405)


BUILD/autorun.sh:
  Removed innobase from compile-dist, and let it use autorun.sh to avoid
  code duplication. Also corrected a problem when searching for one of
  "libtoolize" and "glibtoolize", now it honors the PATH setting (Bug#31405)

into  trift2.:/MySQL/M51/push-5.1


mysql-test/r/derived.result:
  Auto merged
mysql-test/r/ps_2myisam.result:
  Auto merged
mysql-test/r/ps_3innodb.result:
  Auto merged
mysql-test/r/ps_4heap.result:
  Auto merged
mysql-test/r/ps_5merge.result:
  Auto merged
BitKeeper/deleted/.del-ps_6bdb.result:
  Auto merged
mysql-test/r/sp.result:
  Auto merged
mysql-test/r/type_date.result:
  Auto merged
mysql-test/r/type_datetime.result:
  Auto merged
mysql-test/suite/ndb/r/ps_7ndb.result:
  Auto merged
mysql-test/t/sp.test:
  Auto merged
mysql-test/t/type_date.test:
  Auto merged
sql/field.cc:
  Auto merged
sql/item_func.cc:
  Auto merged
sql/item_timefunc.cc:
  Auto merged
sql/sql_cache.cc:
  Null merge of a 5.0 patch, by order of the original author via IRC.

into  trift2.:/MySQL/M51/push-5.1


configure.in:
  Auto merged
mysql-test/suite/funcs_1/r/innodb__datadict.result:
  Auto merged
mysql-test/suite/funcs_1/r/memory__datadict.result:
  Auto merged
mysql-test/suite/funcs_1/r/myisam__datadict.result:
  Auto merged
mysql-test/r/partition.result:
  Ensure test for bug number 27816 is in the merged tree.
mysql-test/t/partition.test:
  Ensure test for bug number 27816 is in the merged tree.

into  trift2.:/MySQL/M50/push-5.0

into  trift2.:/MySQL/M50/push-5.0


mysql-test/r/derived.result:
  Auto merged
mysql-test/r/ps_2myisam.result:
  Auto merged
mysql-test/r/ps_3innodb.result:
  Auto merged
mysql-test/r/ps_4heap.result:
  Auto merged
mysql-test/r/ps_5merge.result:
  Auto merged
mysql-test/r/ps_6bdb.result:
  Auto merged
mysql-test/r/ps_7ndb.result:
  Auto merged
mysql-test/r/sp.result:
  Auto merged
mysql-test/r/type_datetime.result:
  Auto merged
mysql-test/t/derived.test:
  Auto merged
mysql-test/t/sp.test:
  Auto merged
sql/field.cc:
  Auto merged
sql/item_func.cc:
  Auto merged
sql/item_timefunc.cc:
  Auto merged
mysql-test/r/type_date.result:
  Null-merge 5.0.50 build clone:
  The test for bug#31221 is already in the receiving tree.
mysql-test/t/type_date.test:
  Null-merge 5.0.50 build clone:
  The test for bug#31221 is already in the receiving tree.

into  trift2.:/MySQL/M50/push-5.0

into  trift2.:/MySQL/M41/push-4.1

into  mysql.com:/home/gluh/MySQL/Merge/5.1-opt

  Bug#31857 funcs_1: a_processlist_priv_no_prot and b_processlist_priv_ps fail
  
Reason for the changes is:
  WL4007 Deprecate RENAME DATABASE: replace with ALTER DATABASE <name> UPGRADE


mysql-test/suite/funcs_1/datadict/datadict_priv.inc:
  1. Adjustment to new server response (ER_PARSE_ERROR instead of ER_DBACCESS_DENIED_ERROR)
  2. Add missing subtest with ALTER DATABASE ... UPGRADE ...
mysql-test/suite/funcs_1/r/a_processlist_priv_no_prot.result:
  Updated results
mysql-test/suite/funcs_1/r/b_processlist_priv_ps.result:
  Updated results

   Bug#31408 funcs_1: <engine>_trig_03e test fail
Modification:
   The TRIGGER PRIVILEGE is now needed for getting informations about TRIGGERs.
   Therefore after REVOKE TRIGGER privilege the 
   - SHOW TRIGGERS
   - SELECT * FROM INFORMATION_SCHEMA.TRIGGERS
   result sets are now empty.


mysql-test/suite/funcs_1/r/innodb_trig_03e.result:
  Updated results
mysql-test/suite/funcs_1/r/memory_trig_03e.result:
  Updated results
mysql-test/suite/funcs_1/r/myisam_trig_03e.result:
  Updated results
mysql-test/suite/funcs_1/r/ndb_trig_03e.result:
  Updated results

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.1-build

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.0-build

BitKeeper/triggers/pre-commit.check-case.pl:
  catch duplicate file names, ignoring capitalisation, mostly to avoid changesets where a deleted file foobar and a deleted file FooBar break a tree on case insensitive file systems

to get rid of a name clash among *deleted* files on case-insignificant file systems.


BitKeeper/deleted/.del-changelog-bleh:
  Rename: BitKeeper/deleted/.del-changelog -> BitKeeper/deleted/.del-changelog-bleh