into  polly.(none):/home/kaa/src/maint/bug5731/my50-bug5731


include/my_global.h:
  Auto merged
sql/mysqld.cc:
  Auto merged

into  polly.(none):/home/kaa/src/maint/bug5731/my50-bug5731

  
The patch limits read_buffer_size and read_rnd_buffer_size by 2 GB on all platforms for the following reasons:
  
- I/O code in mysys, code in mf_iocache.c and in some storage engines do not currently work with sizes > 2 GB for those buffers
- even if the above had been fixed, Windows POSIX read() and write() calls are not 2GB-safe, so setting those buffer to sizes > 2GB would not work correctly on 64-bit Windows.


include/my_global.h:
  Removed SSIZE_MAX definition because it's not neeeded anymore.
sql/mysqld.cc:
  Limit read_buffer_size and read_rnd_buffer_size by 2 GB on all platforms.

Backport of the keycache changes from http://lists.mysql.com/commits/31517 to make keycache 64-bit safe in 5.0. This is for bug #5731.


include/keycache.h:
  Backport of the keycache changes from http://lists.mysql.com/commits/31517 to make keycache 64-bit safe in 5.0.
mysys/mf_keycache.c:
  Backport of the keycache changes from http://lists.mysql.com/commits/31517 to make keycache 64-bit safe in 5.0.

This is required to allow key_buffer_size > 4 GB (bug #5731).


include/my_sys.h:
  Backport of my_malloc() changes from 5.1 to make it 64-bit safe on Unix platforms.
mysys/my_largepage.c:
  Backport of my_malloc() changes from 5.1 to make it 64-bit safe on Unix platforms.
mysys/my_malloc.c:
  Backport of my_malloc() changes from 5.1 to make it 64-bit safe on Unix platforms.
mysys/safemalloc.c:
  Backport of my_malloc() changes from 5.1 to make it 64-bit safe on Unix platforms.

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50

into  pilot.(none):/data/msvensson/mysql/mysql-5.0-maint

into  pilot.(none):/data/msvensson/mysql/bug28812/my50-bug28812

 - Merge sslaccept and sslconnect.
 - Atomically "reset" vio to VIO_TYPE_SSL when the SSL connection has
   succeeded, this avoids having to revert anything and thus protects
   against "close_active_vio" in the middle.
 - Add some variance to the testcase


mysql-test/t/rpl_ssl.test:
  Add some variance by running two selects before stopping the slave
  Check that number of records in t1 are equal on master and slave
vio/viossl.c:
  Rewrite sslconnect and sslaccept to automically "reset" the vio
  to VIO_TYPE_SSL. Also use the fd from 'SSL_get_fd' to avoid
  setting vio->sd to -1, that previously occured when "close_active_vio"
  was called during connect/accept.
  
  Merge the two function since they were exactly the same except for one line.
  
  Update the DBUG printouts to be generic(i.e use peer instead of client/server).

- Fix bug#27265
- Support for fixing bug#18441


extra/yassl/include/openssl/crypto.h:
  Import patch yassl.diff
extra/yassl/include/openssl/ssl.h:
  Import patch yassl.diff
extra/yassl/include/yassl_int.hpp:
  Import patch yassl.diff
extra/yassl/src/handshake.cpp:
  Import patch yassl.diff
extra/yassl/src/socket_wrapper.cpp:
  Import patch yassl.diff
extra/yassl/src/ssl.cpp:
  Import patch yassl.diff
extra/yassl/src/yassl_int.cpp:
  Import patch yassl.diff
extra/yassl/taocrypt/src/coding.cpp:
  Import patch yassl.diff
extra/yassl/taocrypt/src/crypto.cpp:
  Import patch yassl.diff
extra/yassl/include/openssl/des_old.h:
  Import patch yassl.diff
extra/yassl/include/openssl/evp.h:
  Import patch yassl.diff
extra/yassl/include/openssl/hmac.h:
  Import patch yassl.diff
extra/yassl/include/openssl/objects.h:
  Import patch yassl.diff
extra/yassl/include/openssl/sha.h:
  Import patch yassl.diff
extra/yassl/include/openssl/prefix_ssl.h:
  Update prefixes

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


sql/sql_show.cc:
  Auto merged

configure.in:
  adjust version number after 5.0.48 clone-off

 - "mysql" and "mysqlcheck" should not read defaults file


client/mysql_upgrade.c:
  Instruct "mysql" and "mysqlcheck" that is invoked by "mysql_upgrade" not
  to read defaults file, they should get all the parameters they need from
  mysql_upgrade(that read the default file)

into  mysql.com:/data0/mysqldev/my/build-200708231546-5.0.48/mysql-5.0-release

 - Chop off .libs/ part of path if running in non installed builddir
   using libtool


client/mysql_upgrade.c:
  Chop off .libs part of path to avoid executing "non relinked" binaries
  that would use the system installed dynamic libraries instead of the
  newly built ones.

into  a88-113-38-195.elisa-laajakaista.fi:/home/my/bk/mysql-5.0-marvel

into  trift2.:/MySQL/M50/push-5.0


netware/Makefile.am:
  Auto merged

1) Ensure "init_db.sql" and "test_db-sql" really get built.

2) Ensure the "*.def" files with NetWare linker options get distributed to the proper directories.


netware/BUILD/compile-netware-END:
  Ensure the "*.def" files are built for NetWare.
  
  This is a backport of a 5.1 fix which may not be needed in 5.0 but cannot do any harm:
  the general "link_sources" step might fall victim to a cleanup which would be fatal
  just for NetWare, because of problems in the ordering of SUBDIR entries.
netware/Makefile.am:
  1) The scripts "init_db.sql" and "test_db.sql" must be built in the NetWare phase.
  
  2) Use "basename", not sed.

'mtr_short_hostname' and 'mtr_full_hostname'

into  mysql.com:/data0/mysqldev/my/build-200708231546-5.0.48/mysql-5.0-release

into  a88-113-38-195.elisa-laajakaista.fi:/home/my/bk/mysql-5.0-marvel

into  mysql.com:/data0/mysqldev/my/build-200708231546-5.0.48/mysql-5.0-release


sql/sql_base.cc:
  Auto merged
sql/sql_cache.cc:
  Auto merged

into  pilot.(none):/data/msvensson/mysql/mysql-5.0-maint

into  trift2.:/MySQL/M50/push-5.0

into  trift2.:/MySQL/M50/push-5.0

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.0-build

into  bk-internal.mysql.com:/users/gshchepa/mysql-5.0-opt


sql/sql_base.cc:
  Auto merged
sql/sql_cache.cc:
  Auto merged

 - Move increment of "i" to "increment section" of for loop
 - Protect against writing after end of "buff"(backport from 5.1)


sql/sql_show.cc:
  - Move the increment of i to "increment" section of for loop. Since "i"
  was initially 0 the for loop exited immediately
  - Add protection for writing after end of "buff"

into  trift2.:/MySQL/M50/push-5.0

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.0.48


sql/sql_base.cc:
  Auto merged
sql/sql_cache.cc:
  Auto merged

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.0.48

1) We do not provide the "isam" table handler in 5.0 and up (different from "myisam" !),
   so we do not need the ".def" files for the "isam"-specific tools.

2) Use "basename" to get the base name of a file, not a harder-to-read sed expression.


BitKeeper/deleted/.del-isamchk.def:
  Delete: netware/isamchk.def
BitKeeper/deleted/.del-isamlog.def:
  Delete: netware/isamlog.def
BitKeeper/deleted/.del-pack_isam.def:
  Delete: netware/pack_isam.def
netware/Makefile.am:
  Use a plain "basename" showing the purpose, not a sed command which is harder to read.

into  gleb.loc:/home/uchum/work/bk/5.0-opt

into  hynda.mysql.fi:/home/my/mysql-5.0-marvel

Killing a SELECT query with KILL QUERY or KILL CONNECTION
causes a server crash if the query cache is enabled.

Normal evaluation of a query may be interrupted by the
KILL QUERY/CONNECTION statement, in this case the mysql_execute_command
function returns TRUE, and the thd->killed flag has true value.
In this case the result of the query may
be cached incompletely (omitting call to query_cache_insert inside
the net_real_write function), and next call to query_cache_end_of_result
may lead to server crash.
Thus, the query_cache_end_of_result function has been modified to abort
query cache in the case of killed thread.



sql/sql_cache.cc:
  Fixed bug #30201.
  The  query_cache_end_of_result function has been modified to abort query
  cache in the case of query execution failure. Also this function has been
  modified to remove incomplete query block.

into  trift2.:/MySQL/M50/push-5.0

into  hynda.mysql.fi:/home/my/mysql-5.0-marvel

into  gleb.loc:/home/uchum/work/bk/5.0-opt