Detailed revision comments:

r6718 | marko | 2010-02-16 15:06:16 +0200 (Tue, 16 Feb 2010) | 1 line
branches/zip: Fix a comment.

Detailed revision comments:

r6717 | marko | 2010-02-16 14:53:20 +0200 (Tue, 16 Feb 2010) | 2 lines
branches/zip: log_reserve_and_write_fast(): Correct a race condition
in UNIV_LOG_LSN_DEBUG.  This could have caused Issue #440.

Detailed revision comments:

r6715 | sunny | 2010-02-16 10:14:21 +0200 (Tue, 16 Feb 2010) | 1 line
branches/zip: Fix comment. Non functional change.

Detailed revision comments:

r6714 | sunny | 2010-02-16 10:12:25 +0200 (Tue, 16 Feb 2010) | 2 lines
branches/zip: Update the comments and fix the whitespace issues.
See rb://255 Approved by: Marko

Detailed revision comments:

r6713 | sunny | 2010-02-16 10:12:17 +0200 (Tue, 16 Feb 2010) | 7 lines
branches/zip: Change the bit fields back to ulint. Bit fields were causing
problems with concurrency on SMP systems because of word packing issues.
The number of trx_t's in a system is not sufficient enough to require that
we try and save a few bytes in the data structure.

See rb://255 for details.

Detailed revision comments:

r6712 | marko | 2010-02-16 10:05:36 +0200 (Tue, 16 Feb 2010) | 2 lines
branches/zip: trx_lists_init_at_db_start(): Assert that the kernel_mutex
is held by the caller.

Detailed revision comments:

r6707 | inaam | 2010-02-12 19:22:35 +0200 (Fri, 12 Feb 2010) | 4 lines
branches/zip

ChangeLog entry for r6674.

Detailed revision comments:

r6675 | marko | 2010-02-11 22:41:11 +0200 (Thu, 11 Feb 2010) | 1 line
branches/zip: Remove bogus debug assertions introduced in r6660.

Detailed revision comments:

r6674 | inaam | 2010-02-11 17:54:44 +0200 (Thu, 11 Feb 2010) | 16 lines
branches/zip bug# 49535

This is a backport of r4924.
mem_heap_get_size() scans all allocated blocks to calculate the total
size of the heap. This patch introduces a new, total_size, field in
mem_block_info_struct. This field is valid only for base block 
(i.e.: the first block allocated for the heap) and is set to
ULINT_UNDEFINED in other blocks.
This considerably improves the performance of redo scan during recovery.

rb://108 issue#216

Approved by: Heikki

Detailed revision comments:

r6673 | marko | 2010-02-11 13:09:48 +0200 (Thu, 11 Feb 2010) | 9 lines
branches/zip: Relax a debug assertion about a missing BLOB. (Issue #452)
When rolling back an incomplete transaction in purge, tolerate missing
BLOBs also in update undo, when undoing an INSERT by updating a delete-marked
record, and the delete-marked record is no longer needed.
Previously, we only tolerated missing BLOBs in insert undo.
This merely fixes a debug assertion; the code performed correctly
without UNIV_DEBUG.

rb://249 approved by Sunny Bains.

Detailed revision comments:

r6672 | marko | 2010-02-11 13:01:18 +0200 (Thu, 11 Feb 2010) | 1 line
branches/zip: Introduce thr_is_recv().

Detailed revision comments:

r6660 | marko | 2010-02-11 11:21:11 +0200 (Thu, 11 Feb 2010) | 7 lines
branches/zip: Clarify the rollback of INSERT by UPDATE of delete-marked rec.

row_undo_mod_remove_clust_low(): Augment the function comment.

row_undo_mod_remove_clust_low(), row_undo_mod_del_mark_or_remove_sec_low(),
row_undo_mod_del_mark_or_remove_sec(), row_undo_mod_upd_del_sec():
Add ut_ad(node->rec_type == TRX_UNDO_UPD_DEL_REC);

Detailed revision comments:

r6639 | marko | 2010-02-10 13:11:04 +0200 (Wed, 10 Feb 2010) | 1 line
branches/zip: trx_rseg_create(): Unused function, remove.

Detailed revision comments:

r6635 | marko | 2010-02-10 11:07:05 +0200 (Wed, 10 Feb 2010) | 4 lines
branches/zip: Clean up after r6559.  Now that
btr_pcur_open_with_no_init() is a macro, do not mix preprocessor
directives in the macro invocation, because it is implementation-defined
whether that is going to work.

Detailed revision comments:

r6633 | marko | 2010-02-10 10:40:55 +0200 (Wed, 10 Feb 2010) | 31 lines
branches/zip: Merge revisions 6538:6613 from branches/5.1:

  ------------------------------------------------------------------------
  r6545 | jyang | 2010-02-03 03:57:32 +0200 (Wed, 03 Feb 2010) | 8 lines
  Changed paths:
     M /branches/5.1/lock/lock0lock.c

  branches/5.1: Fix bug #49001, "SHOW INNODB STATUS deadlock info
  incorrect when deadlock detection aborts". Print the correct
  lock owner when recursive function lock_deadlock_recursive()
  exceeds its maximum depth LOCK_MAX_DEPTH_IN_DEADLOCK_CHECK.

  rb://217, approved by Marko.
  ------------------------------------------------------------------------
  r6613 | inaam | 2010-02-09 20:23:09 +0200 (Tue, 09 Feb 2010) | 11 lines
  Changed paths:
     M /branches/5.1/buf/buf0buf.c
     M /branches/5.1/buf/buf0rea.c
     M /branches/5.1/include/buf0rea.h

  branches/5.1: Fix Bug #38901
  InnoDB logs error repeatedly when trying to load page into buffer pool

  In buf_page_get_gen() if we are unable to read a page (because of
  corruption or some other reason) we keep on retrying. This fills up
  error log with millions of entries in no time and we'd eventually run
  out of disk space. This patch limits the number of attempts that we
  make (currently set to 100) and after that we abort with a message.

  rb://241 Approved by: Heikki
  ------------------------------------------------------------------------

Detailed revision comments:

r6631 | marko | 2010-02-10 09:19:52 +0200 (Wed, 10 Feb 2010) | 1 line
branches/zip: Document r6614 in ChangeLog.

Detailed revision comments:

r6614 | inaam | 2010-02-09 20:26:23 +0200 (Tue, 09 Feb 2010) | 7 lines
branches/plugin rb://242

Let the master thread sleep if the amount of work to be done is
calibrated as taking less than a second.

Approved by: Heikki

Detailed revision comments:

r6612 | marko | 2010-02-09 14:32:39 +0200 (Tue, 09 Feb 2010) | 3 lines
branches/zip: recv_recovery_rollback_active():
Drop the temporary tables and indexes after enabling sync order checks.
This should not make any difference. This could have been done in r6611.

Detailed revision comments:

r6611 | marko | 2010-02-09 14:28:25 +0200 (Tue, 09 Feb 2010) | 11 lines
branches/zip: Roll back dictionary transaction(s) before scanning *.ibd files

innobase_start_or_create_for_mysql(): Roll back data dictionary
transactions before scanning the *.ibd files. Then, data dictionary
records can be loaded to the cache before opening the *.ibd files.

recv_recovery_rollback_active(): Refactored from
recv_recovery_from_checkpoint_finish().

rb://235, committing without review, because this is needed for
TablespaceDictionary.

Detailed revision comments:

r6610 | marko | 2010-02-09 13:53:59 +0200 (Tue, 09 Feb 2010) | 17 lines
branches/zip: When dropping temporary indexes and tables at startup,
first load them to the data dictionary cache and use the normal
routines for dropping tables or indexes.  This should reduce the
risk of bugs and also make the code compatible with the upcoming
TablespaceDictionary implementation.

DICT_SYS_INDEXES_NAME_FIELD: The clustered index position of SYS_INDEXES.NAME.

row_merge_drop_temp_indexes(): Scan SYS_INDEXES for tables containing
temporary indexes, and load the tables as needed. Invoke
row_merge_drop_index() to drop the indexes.

row_mysql_drop_temp_tables(): Scan SYS_TABLES for temporary tables,
load them with dict_load_table() and drop them with
row_drop_table_for_mysql().

rb://251, not yet reviewed

Detailed revision comments:

r6609 | marko | 2010-02-09 13:45:40 +0200 (Tue, 09 Feb 2010) | 1 line
branches/zip: dict_field_print_low(): Add const qualifier.

Detailed revision comments:

r6608 | marko | 2010-02-09 11:02:37 +0200 (Tue, 09 Feb 2010) | 1 line
branches/zip: ha_innobase::add_index(): Check for !innodb_table.

Detailed revision comments:

r6595 | marko | 2010-02-08 13:53:02 +0200 (Mon, 08 Feb 2010) | 1 line
branches/zip: btr_pcur_commit(): Unused function, remove.

Detailed revision comments:

r6594 | marko | 2010-02-08 12:55:04 +0200 (Mon, 08 Feb 2010) | 2 lines
branches/zip: rec_get_nth_field_offs_old():
Replace if (!cond) ut_error; tests with ut_a(cond).

Detailed revision comments:

r6591 | marko | 2010-02-08 10:06:39 +0200 (Mon, 08 Feb 2010) | 3 lines
branches/zip: row_merge_drop_index(): Remove redundant condition
on SYS_INDEXES.TABLE_ID.  INDEX_ID must be instance-widely unique,
because SYS_FIELDS is not indexed by TABLE_ID.

Detailed revision comments:

r6560 | sunny | 2010-02-04 16:11:23 +0200 (Thu, 04 Feb 2010) | 7 lines
branches/zip: Remove the additional check introduced in r6534 which tries
to check if the joining transaction has any other transactions waiting on
its locks. This optimization results in excessive deadlocks when running
Sysbench with a large number of threads. The function seems to return
FALSE positives.

rb://250

Detailed revision comments:

r6559 | marko | 2010-02-04 13:21:18 +0200 (Thu, 04 Feb 2010) | 14 lines
branches/zip: Pass the file name and line number of the caller of the
b-tree cursor functions to the buffer pool requests, in order to make
the latch diagnostics more accurate.

buf_page_optimistic_get_func(): Renamed to buf_page_optimistic_get().

btr_page_get_father_node_ptr(), btr_insert_on_non_leaf_level(),
btr_pcur_open(), btr_pcur_open_with_no_init(), btr_pcur_open_on_user_rec(),
btr_pcur_open_at_rnd_pos(), btr_pcur_restore_position(),
btr_cur_open_at_index_side(), btr_cur_open_at_rnd_pos():
Rename the function to _func and add the parameters file, line.
Define wrapper macros with __FILE__, __LINE__.

btr_cur_search_to_nth_level(): Add the parameters file, line.

Detailed revision comments:

r6548 | marko | 2010-02-03 15:01:39 +0200 (Wed, 03 Feb 2010) | 11 lines
branches/zip: buf_LRU_invalidate_tablespace(): Ensure that prev_bpage
is not relocated when freeing a compressed block.  This avoids the
costly rescan of the LRU list.  (Bug #35077, Issue #449)

At most one buffer-fix will be active at a time, affecting two blocks:
the buf_page_t and the compressed page frame. This should not block
the memory defragmentation in buf0buddy.c too much.  In fact, it may
avoid unnecessary copying if also prev_bpage belongs to the tablespace
that is being invalidated.

rb://240

Detailed revision comments:

r6547 | marko | 2010-02-03 14:43:38 +0200 (Wed, 03 Feb 2010) | 14 lines
branches/zip: Clean up CHECK TABLE error handling. (Issue #220)

ha_innobase::change_active_index(): Clean up code formatting.

ha_innobase::check(): Incorporate the code from
row_check_table_for_mysql().  Report errors to the client connection
instead of writing them to the error log.

row_check_table_for_mysql(): Remove.

row_check_index_for_mysql(): Renamed from row_scan_and_check_index().
Let the caller initialize prebuilt, and assume that the index is usable.

rb://178 approved by Sunny Bains

Detailed revision comments:

r6546 | jyang | 2010-02-03 11:05:24 +0200 (Wed, 03 Feb 2010) | 9 lines
branches/zip: Relax assertion on the number of index defined
in InnoDB must be comparable with that of MySQL to tolerate
possible dictionary inconsistency. Fix Mantis issue #455,
"UNIV_DEBUG+ assert ha_innodb.cc:3152 ib_num_index >= 
mysql_num_index".

rb://248 Approved by Marko.

Detailed revision comments:

r6540 | marko | 2010-02-01 11:35:13 +0200 (Mon, 01 Feb 2010) | 1 line
branches/zip: ChangeLog: Document the merge of 6471:6538 from branches/5.1.

Detailed revision comments:

r6539 | marko | 2010-02-01 11:31:12 +0200 (Mon, 01 Feb 2010) | 75 lines
branches/zip: Merge revisions 6471:6538 from branches/5.1:

  ------------------------------------------------------------------------
  r6488 | sunny | 2010-01-21 02:55:08 +0200 (Thu, 21 Jan 2010) | 2 lines
  Changed paths:
     M /branches/5.1/mysql-test/innodb-autoinc.result
     M /branches/5.1/mysql-test/innodb-autoinc.test

  branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test
  into a separate test/result files.
  ------------------------------------------------------------------------
  r6489 | sunny | 2010-01-21 02:57:50 +0200 (Thu, 21 Jan 2010) | 2 lines
  Changed paths:
     A /branches/5.1/mysql-test/innodb-autoinc-44030.result
     A /branches/5.1/mysql-test/innodb-autoinc-44030.test

  branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test
  into a separate test/result files.
  ------------------------------------------------------------------------
  r6492 | sunny | 2010-01-21 09:38:35 +0200 (Thu, 21 Jan 2010) | 1 line
  Changed paths:
     M /branches/5.1/mysql-test/innodb-autoinc-44030.test

  branches/5.1: Add reference to bug#47621 in the comment.
  ------------------------------------------------------------------------
  r6535 | sunny | 2010-01-30 00:08:40 +0200 (Sat, 30 Jan 2010) | 11 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc

  branches/5.1: Undo the change from r6424. We need to return DB_SUCCESS even
  if we were unable to initialize the tabe autoinc value. This is required for
  the open to succeed. The only condition we currently treat as a hard error
  is if the autoinc field instance passed in by MySQL is NULL.

  Previously if the table autoinc value was 0 and the next value was requested
  we had an assertion that would fail. Change that assertion and treat a value
  of 0 to mean that the autoinc system is unavailable. Generation of next
  value will now return failure.

  rb://237
  ------------------------------------------------------------------------
  r6536 | sunny | 2010-01-30 00:13:42 +0200 (Sat, 30 Jan 2010) | 6 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/mysql-test/innodb-autoinc.result
     M /branches/5.1/mysql-test/innodb-autoinc.test

  branches/5.1: Check *first_value everytime against the column max
  value and  set *first_value to next autoinc if it's > col max value.
  ie.  not rely on what is passed in from MySQL.

  [49497] Error 1467 (ER_AUTOINC_READ_FAILED) on inserting a negative value
  rb://236
  ------------------------------------------------------------------------
  r6537 | sunny | 2010-01-30 00:35:00 +0200 (Sat, 30 Jan 2010) | 2 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/mysql-test/innodb-autoinc.result
     M /branches/5.1/mysql-test/innodb-autoinc.test

  branches/5.1: Undo r6536.
  ------------------------------------------------------------------------
  r6538 | sunny | 2010-01-30 00:43:06 +0200 (Sat, 30 Jan 2010) | 6 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/mysql-test/innodb-autoinc.result
     M /branches/5.1/mysql-test/innodb-autoinc.test

  branches/5.1: Check *first_value every time against the column max
  value and  set *first_value to next autoinc if it's > col max value.
  ie.  not rely on what is passed in from MySQL.

  [49497] Error 1467 (ER_AUTOINC_READ_FAILED) on inserting a negative value
  rb://236
  ------------------------------------------------------------------------

Detailed revision comments:

r6534 | sunny | 2010-01-29 23:42:49 +0200 (Fri, 29 Jan 2010) | 15 lines
branches/zip: Two changes to fix the problem:

1. First scan the joining transaction's locks and check if no other
transaction is waiting for a lock held by the joining transaction.
If no other transaction is waiting then  no deadlock an occur and
we avoid doing an exhaustive search.

2. Change the direction of the lock traversal from backward to forward.
Previously we traversed backward from the lock that has to wait, the function
to that fetched the previous node was very inefficient resulting in O(n^2)
access to the rec lock list.

Fix Bug #49047 InnoDB deadlock detection is CPU intensive with many locks on a single row.

rb://218

Detailed revision comments:

r6533 | calvin | 2010-01-29 23:31:59 +0200 (Fri, 29 Jan 2010) | 4 lines
branches/zip: remove duplicated copyright and license info.

Detailed revision comments:

r6527 | vasil | 2010-01-29 14:39:48 +0200 (Fri, 29 Jan 2010) | 6 lines
branches/zip:

Extend the comment about row_mysql_handle_errors().

Suggested by:	Heikki

Detailed revision comments:

r6526 | jyang | 2010-01-28 18:12:40 +0200 (Thu, 28 Jan 2010) | 8 lines
branches/zip: Add index translation table to map mysql index
number to InnoDB index structure directly. Fix Bug #47622:
"the new index is added before the existing ones in MySQL,
but after one in SE".

rb://215, approved by Marko

Detailed revision comments:

r6525 | marko | 2010-01-28 16:23:15 +0200 (Thu, 28 Jan 2010) | 11 lines
branches/zip: buf_LRU_invalidate_tablespace(): Do not unnecessarily
acquire the block_mutex for every block in the LRU list. Only acquire
it when holding buf_pool_mutex is not sufficient. This should speed up
the function and considerably reduce traffic on the memory bus and
caches.

I noticed this deficiency when working on Issue #157.
This deficiency popped up again in Issue #449 (Bug #35077),
which this fix does not fully address.

rb://78 revision 1 approved by Heikki Tuuri.

Detailed revision comments:

r6521 | marko | 2010-01-27 10:49:01 +0200 (Wed, 27 Jan 2010) | 17 lines
branches/zip: Drop temporary tables at startup.
This addresses the third aspect of Bug #41609.

row_mysql_drop_temp_tables(): New function, to drop all temporary
tables. These can be distinguished by the least significant bit of
MIX_LEN. However, we will skip ROW_FORMAT=REDUNDANT tables, because in
the records for those tables, that bit may be garbage.

recv_recovery_from_checkpoint_finish(): Invoke
row_mysql_drop_temp_tables().  Normally, if the .frm files for the
temporary tables exist at startup, MySQL will ask InnoDB to drop the
temporary tables.  However, if the files are deleted, for instance, by
the boot scripts of the operating system, the tables would remain in
the InnoDB data dictionary unless someone digs them up by
innodb_table_monitor and creates .frm files for dropping the tables.

rb://221 approved by Sunny Bains.

Detailed revision comments:

r6498 | marko | 2010-01-21 11:22:52 +0200 (Thu, 21 Jan 2010) | 15 lines
branches/zip: buf_page_get_gen(): Obey recv_no_ibuf_operations
and do not call ibuf_merge_or_delete_for_page() in crash recovery,
before the redo log has been applied.
This could cure some hard-to-repeat, hard-to-explain bugs
related to secondary indexes.

A possible recipe to repeat the bug:

1. update a secondary index leaf page on a compressed table
2. evict the page from the buffer pool while it is still dirty
3. ibuf_insert() something for the page
4. crash
5. crash recovery; ibuf merge would be done too early,
before applying redo log to the sec index page or the ibuf pages

Detailed revision comments:

r6472 | calvin | 2010-01-16 01:53:47 +0200 (Sat, 16 Jan 2010) | 12 lines
branches/zip: Merge revisions 6425:6471 from branches/5.1
to pick up the first part fix of bug49396.

    ------------------------------------------------------------------------
    r6471 | calvin | 2010-01-15 17:43:27 -0600 (Fri, 15 Jan 2010) | 4 lines

    branches/5.1: fix bug#49396: main.innodb test fails in embedded mode

    Change replace_result by using $MYSQLD_DATADIR. Tested in both embedded
    mode and normal server mode.
    ------------------------------------------------------------------------

r6473 | calvin | 2010-01-16 01:58:16 +0200 (Sat, 16 Jan 2010) | 6 lines
branches/zip: fix bug#49396: innodb.innodb-index test fails in
embedded mode

This is 2nd part of the fix for bug#49396. The 1st part is
innodb.test. Tested in both embedded mode and normal server mode.