mysql-test/include/have_local_infile.inc:
  BitKeeper file /data0/mkindahl/mysql-5.0-rpl-merge/mysql-test/include/have_local_infile.inc
mysql-test/r/have_local_infile.require:
  BitKeeper file /data0/mkindahl/mysql-5.0-rpl-merge/mysql-test/r/have_local_infile.require
mysql-test/t/binlog_start_comment.test:
  Test requires that local_infile is on, so added require for that.
mysql-test/t/rpl_sp.test:
  Adding missing sync_slave_with_master causing following tests to fail.

sql/sql_repl.cc:
  Adding cast to remove compile error on Windows platform.

mysql-test/t/rpl_transaction.test:
  Test only works for debug build.

mysql-test/r/bdb_notembedded.result:
  Result change.
mysql-test/r/rpl_loaddata_map.result:
  Result change.
mysql-test/t/rpl_loaddata_map.test:
  Blanking out file id as well.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl-merge


include/my_sys.h:
  Auto merged
mysql-test/r/blackhole.result:
  Auto merged
mysql-test/r/case.result:
  Auto merged
mysql-test/r/mysqlbinlog2.result:
  Auto merged
mysql-test/t/blackhole.test:
  Auto merged
mysql-test/t/case.test:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_acl.cc:
  Auto merged
sql/sql_parse.cc:
  Auto merged

into  mail.hezx.com:/media/sda3/work/mysql/bkwork/bug26489_corruption_in_relay_log/5.0

mysql-test/r/rpl_grant.result:
  update result

Here is the scenario that causes the failure.(by Mats)

1. The to-be corrupt log event (let's call it X), is split into two
   packets B and C on the network level (net_write_buff()). The parts
   are X = (x',x''). The part x' ends up in packet B and part x''
   ends up in packet C. Prior to the corrupt event X, the event Y has
   been written successfully, but has been split into two packets as
   well, which we call (y',y'').
2. The master sends packet A = (y'',x') to the slave, increases the
   packet sequence number, the slave receives the packet, but fails
   to reply before the master gets a timeout.
3. Since the master got a timeout, it reports failure, and aborts
   sending the binary log by exiting mysql_binlog_send(). However, it
   leaves the buffer intact, still holding y'' (but not x', since the
   write_pos is not increased).
4. After exiting mysql_binlog_send(), the master does a
   disconnection of the client thread, which involves sending an
   error message e to the client (i.e., the slave).
5. In this case, net_write_buff() is used again, but this time the
   old contents of the packet is used so that the new packet is
   D = (y'',e). Note that this will use a new packet sequence number,
   since the packet number was increased in step 2.
6. The slave receives the tail y'' of the Y log event, concatenates
   this with x' (which it already received), and writes the event
   (x',y'') it to the relay log since it hasn't noticed anything is
   amiss.
7. It then tries to read more bytes, which is either e (if the length
   given for X just happened to match the length given for Y, or just
   plain garbage because the slave is out of sync with what is
   actually sent.
8. After a while, the SQL thread tries to execute the event (x',y''),
   which is very likely to be just nonsense.

The problem can be fixed by not resetting net->error after the call of 
mysql_binlog_send, so the error message will not be sent and the connection
will be closed.


sql/sql_parse.cc:
  Do not reset net->error, if net->error == 2, we should not try to use the connection again

The problem is when create/rename/drop users, the statement was logged regardless of error, even if no data has been changed, the statement was logged.

After this patch, create/rename/drop users don't write the binlog if the statement makes no changes, if the statement does make any changes, log the statement with possible error code.

This patch is based on the patch for BUG#29749, which is not pushed


sql/sql_acl.cc:
  when create/rename/drop users, don't write the binlog if the statement make no changes
mysql-test/r/rpl_user.result:
  New BitKeeper file ``mysql-test/r/rpl_user.result''
mysql-test/t/rpl_user.test:
  New BitKeeper file ``mysql-test/t/rpl_user.test''

mysql-test/r/blackhole.result:
  Result change.
mysql-test/r/mysqlbinlog2.result:
  Result change.
mysql-test/t/blackhole.test:
  Fixing test to ignore file_id for exec_load_file events.

into  mail.hezx.com:/media/sda3/work/mysql/bkwork/bug#32205/mysql-5.0-rpl

mysql-test/r/binlog_start_comment.result:
  Drop tables used in the test case when done
mysql-test/r/blackhole.result:
  Mask out file_id in show binlog events output
mysql-test/r/case.result:
  Drop table t2 too if it exists at the start of the test
mysql-test/t/blackhole.test:
  Mask out file_id in show binlog events output
mysql-test/t/case.test:
  Drop table t2 too if it exists at the start of the test

into  mail.hezx.com:/media/sda3/work/mysql/bkwork/bug#32205/mysql-5.0-rpl

mysql-test/include/show_binlog_events2.inc:
  New BitKeeper file ``mysql-test/include/show_binlog_events2.inc''

into  mail.hezx.com:/media/sda3/work/mysql/bkwork/bug#32205/mysql-5.0-rpl

into  riska.(none):/home/sven/bk/b26395-autocommit-xa/5.0-rpl

into  mail.hezx.com:/media/sda3/work/mysql/bkwork/bug#28908/mysql-5.0-rpl

changes due to non-determinism in value of read_buffer_size.


mysql-test/r/rpl_loaddata_map.result:
  results changed
mysql-test/t/rpl_loaddata_map.test:
  showing only the fact that the buffer size is larger than the packet size.
mysql-test/std_data/bug30435_10k_items.txt:
  data for bug#30435 regression testing
mysql-test/std_data/bug30435_5k.txt:
  data for bug#30435 regression testing

refining the test after it failed on pb.


mysql-test/r/rpl_loaddata_map.result:
  results changed
mysql-test/t/rpl_loaddata_map.test:
  refining the test

into  koti.dsl.inet.fi:/home/elkin/MySQL/TEAM/FIXES/5.0/bug33435-load_data_read_buffer_size


sql/sql_repl.cc:
  Auto merged

          read_buffer_size set on master
BUG#33413 show binlog events fails if binlog has event size of close
          to max_allowed_packet


The size of Append_block replication event was determined solely by
read_buffer_size whereas the rest of replication code deals with
max_allowed_packet.
When the former parameter was set to larger than the latter there were
two artifacts: the master could not read events from binlog;
show master events did not show.

Fixed with 
- fragmenting the used io-cached buffer into pieces each size of less
  than max_allowed_packet (bug#30435)
- incrementing show-binlog-events handling thread's max_allowed_packet
  with the max estimated for the replication header size


include/my_sys.h:
  accessor-macros added in order not to mess with the io cache's implementation
  details in code that merely exploits the io-cache.
sql/sql_repl.cc:
  BUG#33413: incrementing thd->variables.max_allowed_packet with 
  the max estimation for the replication header size (from bug#19402);
  refactoring log_loaded_block() to fragment the io_cache buffer in case
   read_buffer_size > max_allowed_packet.
mysql-test/r/rpl_loaddata_map.result:
  New BitKeeper file ``mysql-test/r/rpl_loaddata_map.result''
mysql-test/t/rpl_loaddata_map-master.opt:
  specific options to trigger  BUG#30435,  BUG#33413 situations
mysql-test/t/rpl_loaddata_map-slave.opt:
  max_allowed_packet to be compatible with the master's version.
mysql-test/t/rpl_loaddata_map.test:
  regression tests for two bugs.

Now, every transaction (including autocommit transactions) start with
a BEGIN and end with a COMMIT/ROLLBACK in the binlog.
Added a test case, and updated lots of test case result files.


mysql-test/t/rpl_transaction-master.opt:
  BitKeeper file /home/sven/bk/b26395-autocommit-xa/5.0-rpl/mysql-test/t/rpl_transaction-master.opt
mysql-test/t/rpl_transaction-slave.opt:
  BitKeeper file /home/sven/bk/b26395-autocommit-xa/5.0-rpl/mysql-test/t/rpl_transaction-slave.opt
mysql-test/r/mix_innodb_myisam_binlog.result:
  Updated result file
mysql-test/r/multi_update.result:
  Updated result file
mysql-test/r/rpl_transaction.result:
  New result file for new test case.
mysql-test/r/sp_trans_log.result:
  Updated result file
mysql-test/r/variables-big.result:
  Updated result file
mysql-test/t/rpl_transaction.test:
  New test case.
sql/log.cc:
   - Always write BEGIN and COMMIT around statements, even in autocommit
     mode.
   - Added comments for binlog_commit and binlog_rollback.
sql/log_event.cc:
  Added debug trigger to avoid writing xid events to the binlog.

into  koti.dsl.inet.fi:/home/elkin/MySQL/TEAM/FIXES/5.0/bug31359-future_gpos

into  mail.hezx.com:/media/sda3/work/mysql/bkwork/bug#28908/5.0

            ignores future_group_master_log_p

There was a redundant assignement. However, that's the only artifact.
Wrt to future_group_master_log_position, there is no issue.
The counter is supposed to be set at Log_event::exec_event().
It's used only by Innodb for recovery purposes.


sql/sql_repl.cc:
  removing a redundant line which arrived with the revision 1.102.1.7.

into  capulet.kindahl.net:/home/mats/devel/fix-mysql-5.0-rpl

When set the server-id dynamically, the server_id member of current thread is not updated.

Update the server_id member of current thread after updated the global variable value.


sql/set_var.cc:
  Update server_id of current thread
mysql-test/r/rpl_server_id.result:
  Add test for BUG#28908
mysql-test/t/rpl_server_id.test:
  Add test for BUG#28908

Complementary patch since LOAD DATA INFILE was not covered in
the previous patch.

This patch adds a check so that the slave skip counter is not
decreased to zero if seeing a BEGIN_LOAD_QUERY_EVENT,
APPEND_BLOCK_EVENT, or CREATE_FILE_EVENT since these cannot
end a group. The group is terminated by an EXECUTE_LOAD_QUERY_
EVENT or DELETE_FILE_EVENT.


mysql-test/r/rpl_slave_skip.result:
  Result change.
mysql-test/t/rpl_slave_skip.test:
  Adding tests to test that the first event of a LOAD DATA INFILE
  can be skipped safely for both transactional and non-transactional
  tables. Also include a case that will generate a DELETE_FILE event
  last in the group, and this should be properly skipped as well.
sql/slave.cc:
  Not decrementing slave skip counter to zero when seeing a
  BEGIN_LOAD_QUERY_EVENT, APPEND_BLOCK_EVENT, or CREATE_FILE_EVENT
  since these cannot end a group.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl-merge


sql/sql_string.cc:
  Auto merged

mysql-test/r/binlog_start_comment.result:
  update result
mysql-test/r/mysqlbinlog2.result:
  Update result for BUG#32205
mysql-test/t/binlog_start_comment.test:
  Reset master at the start of test, use a file instead of a pipe, do clean up

into  bodhi.(none):/opt/local/work/mysql-5.0-runtime

The reason of this bug is that when mysqlbinlog dumps a query, the query is written to
output with a delimeter appended right after it, if the query string ends with a '--'
comment, then the delimeter would be considered as part of the comment, if there are any
statements after this query, then it will cause a syntax error.

Start a newline before appending delimiter after a query string


mysql-test/r/ctype_ucs_binlog.result:
  Update test result for BUG#32205
mysql-test/r/mix_innodb_myisam_binlog.result:
  Update test result for BUG#32205
mysql-test/r/mysqlbinlog.result:
  Update test result for BUG#32205
mysql-test/r/rpl_charset.result:
  Update test result for BUG#32205
mysql-test/r/rpl_timezone.result:
  Update test result for BUG#32205
mysql-test/r/user_var-binlog.result:
  Update test result for BUG#32205
mysql-test/t/mix_innodb_myisam_binlog.test:
  Fixed for BUG#32205
sql/log_event.cc:
  Start a newline before appending delimiter after a query string
mysql-test/r/binlog_start_comment.result:
  Add test for BUG#32205
mysql-test/t/binlog_start_comment.test:
  Add test for BUG#32205

into  whalegate.ndb.mysql.com:/home/tomas/mysql-5.0-ndb-merge

into  station.:/mnt/raid/alik/MySQL/devel/5.0-rt

into  whalegate.ndb.mysql.com:/home/tomas/mysql-5.0-ndb-merge


sql/mysqld.cc:
  Auto merged

into  whalegate.ndb.mysql.com:/home/tomas/mysql-5.0-ndb-merge

- during commit deadlock timeout needs to be at least 5 times db hearbeat