into  olga.mysql.com:/home/igor/dev-opt/mysql-5.1-opt

into  olga.mysql.com:/home/igor/mysql-5.0-opt

into  magare.gmz:/home/kgeorge/mysql/autopush/B29157-5.1-opt

into  gleb.loc:/home/uchum/work/bk/5.0-opt

When a UNION statement forced conversion of an UTF8
charset value to a binary charset value, the byte
length of the result values was truncated to the
CHAR_LENGTH of the original UTF8 value.

into  moonbone.local:/mnt/gentoo64/work/29261-bug-5.0-opt-mysql

spaces.

When the my_strnncollsp_simple function compares two strings and one is a prefix
of another then this function compares characters in the rest of longer key
with the space character to find whether the longer key is greater or less.
But the sort order of the collation isn't used in this comparison. This may
lead to a wrong comparison result, wrongly created index or wrong order of the
result set of a query with the ORDER BY clause.

Now the my_strnncollsp_simple function uses collation sort order to compare
the characters in the rest of longer key with the space character.

into  magare.gmz:/home/kgeorge/mysql/autopush/B27333-gcov-5.0-opt

query / no aggregate of subquery
 The optimizer counts the aggregate functions that 
 appear as top level expressions (in all_fields) in 
 the current subquery. Later it makes a list of these
 that it uses to actually execute the aggregates in
 end_send_group().
 That count is used in several places as a flag whether
 there are aggregates functions.
 While collecting the above info it must not consider
 aggregates that are not aggregated in the current 
 context. It must treat them as normal expressions 
 instead. Not doing that leads to incorrect data about
 the query, e.g. running a query that actually has no
 aggregate functions as if it has some (and hence is
 expected to return only one row).
 Fixed by ignoring the aggregates that are not aggregated
 in the current context. 
 One other smaller omission discovered and fixed in the 
 process : the place of aggregation was not calculated for
 user defined functions. Fixed by calling 
 Item_sum::init_sum_func_check() and 
 Item_sum::check_sum_func() as it's done for the rest of 
 the aggregate functions.

into  mysql.com:/home/hf/work/29247/my51-29247

into  mysql.com:/home/hf/work/29247/my50-29247

into  mysql.com:/home/hf/work/29247/my51-29247

into  mysql.com:/home/hf/work/29247/my51-29247

Sometimes the number of really updated rows (with changed
column values) cannot be determined at the server level
alone (e.g. if the storage engine does not return enough
column values to verify that). So the only dependable way
in such cases is to let the storage engine return that
information if possible.
Fixed the bug at server level by providing a way for the 
storage engine to return information about wether it 
actually updated the row or the old and the new column 
values are the same. It can do that by returning 
HA_ERR_RECORD_IS_THE_SAME in ha_update_row().
Note that each storage engine may choose not to try to
return this status code, so this behaviour remains 
storage engine specific.

into  magare.gmz:/home/kgeorge/mysql/autopush/B26564-5.1-opt

what caused some consequitive tests failures

into  magare.gmz:/home/kgeorge/mysql/autopush/B26642-5.0-opt

into  mysql.com:/home/hf/work/29156/my51-29156

into  dl145s.mysql.com:/dev/shm/mhansson/my50-bug28677

  
  Thanks to Martin Friebe for finding and submitting a fix for this bug!
  
  A table with maximum number of key segments and maximum length key name
  would have a corrupted .frm file, due to an incorrect calculation of the
  complete key length.  Now the key length is computed correctly (I hope) :-)
  
  MyISAM would reject a table with the maximum number of keys and the maximum
  number of key segments in all keys.  It would allow one less than this total
  maximum.  Now MyISAM accepts a table defined with the maximum.  (This is a
  very minor issue.)

don't free thd->lex->sphead if we didn't do lex_start(),
as we can have garbage there

into  olga.mysql.com:/home/igor/dev-opt/mysql-5.0-opt-bug29087

Sometimes special 0 ENUM values was ALTERed to normal
empty string ENUM values.

Special 0 ENUM value has the same string representation
as normal ENUM value defined as '' (empty string).
The do_field_string function was used to convert
ENUM data at an ALTER TABLE request, but this
function doesn't care about numerical "indices" of
ENUM values, i.e. do_field_string doesn't distinguish
a special 0 value from an empty string value.

A new copy function called do_field_enum has been added to
copy special 0 ENUM values without conversion to an empty
string.

into  mysql.com:/home/hf/work/28430/my51-28430

In the ha_partition::position we don't calculate the number of
the partition of the record. We use m_last_part_value instead relying on
that it is set in other place like previous calls of ::write_row().
In replication we do neither of these calls before ::position().
Delete_row_log_event::do_exec_row calls find_and_fetch_row() where
we used position() & rnd_pos() calls to find the record for the
PARTITION/INNODB table as it posesses InnoDB table flags.
Fixed by removing HA_PRIMARY_KEY_REQUIRED_FOR_POSITION flag from PARTITION

into  magare.gmz:/home/kgeorge/mysql/autopush/B29154-5.0-opt

into  dl145s.mysql.com:/dev/shm/mhansson/my51-bug28677

a lookup into a BINARY index by a key ended with spaces. It caused
an assertion abort for a debug version and wrong results for non-debug
versions.

The problem occurred because the function _mi_pack_key stripped off 
the trailing spaces from binary search keys while the function _mi_make_key
did not do it when keys were inserted into the index.

Now the function _mi_pack_key does not remove the trailing spaces from
search keys if they are of the binary type.

MySQL uses _beginthread()/_endthread() instead of 
_beginthreadex()/_endthreadex() to create/end its threads
on Windows.
According to MSDN  _endthread() does close the thread handle.
So there's no need the handle to be closed explicitly.
Besides : WaitForSingleObject(, INFINITE) != WAIT_OBJECT_0) is
true for all practical cases as the other two possible return 
codes (according to MSDN) cannot happen in that case the 
CloseHandle() was actually a dead code.
Fixed by removing the CloseHandle() call. No test case added
because it's not possible to test for absence of dead code. 

into  gleb.loc:/home/uchum/work/bk/5.1-opt

into  gleb.loc:/home/uchum/work/bk/5.1-opt

If one sets MYSQL_READ_DEFAULTS_FILE and MYSQL_READ_DEFAULT_GROUP options
after mysql_real_connect() called with that MYSQL instance,
these options will affect next mysql_reconnect then.
As we use a copy of the original MYSQL object inside mysql_reconnect,
and mysql_real_connect frees options.my_cnf_file and _group strings,
we will free these twice when we execute mysql_reconnect with the
same MYSQL for the second time.

I don't think we should ever read defaults files handling mysql_reconnect.
So i just set them to 0 for the temporary MYSQL object there/

into  dl145s.mysql.com:/dev/shm/mhansson/my51-bug28677

into  mysql.com:/home/hf/work/27084/my51-27084

into  gleb.loc:/home/uchum/work/bk/5.1-opt

into  gleb.loc:/home/uchum/work/bk/5.0-opt

into  gleb.loc:/home/uchum/work/bk/5.0-opt

into  gleb.loc:/home/uchum/work/bk/5.1-opt