sql/sql_parse.cc:
  ALTER TABLE should not be affected by DONT_ALLOW_SHOW_COMMANDS
  (a bug that's there since version 1.1)

sql/sql_table.cc:
  Remove unused code (it's also made obsolete by work in 5.1)

into  bodhi.local:/opt/local/work/mysql-5.0-runtime

into  moonlight.intranet:/home/tomash/src/mysql_ab/mysql-5.0-bug22584


mysql-test/r/view.result:
  Manual merge.
mysql-test/t/view.test:
  Manual merge.

a updatable view.

When there's a VIEW on a base table that have AUTO_INCREMENT column, and
this VIEW doesn't provide an access such column, after INSERT to such
VIEW LAST_INSERT_ID() did not return the value just generated.

This behaviour is intended and correct, because if the VIEW doesn't list
some columns then these columns are effectively hidden from the user,
and so any side effects of inserting default values to them.

However, there was a bug that such statement inserting into a view would
reset LAST_INSERT_ID() instead of leaving it unchanged.

This patch restores the original value of LAST_INSERT_ID() instead of
resetting it to zero.


mysql-test/r/view.result:
  Add result for bug#22584: last_insert_id not updated after inserting
  a record through a updatable view.
mysql-test/t/view.test:
  Add test case for bug#22584: last_insert_id not updated after inserting
  a record through a updatable view.
sql/sql_parse.cc:
  When we have inserted into a view, and AUTO_INCREMENT column is not
  accessed from this view, instead of setting LAST_INSERT_ID to zero set
  it to the value it had before this statement was executed.

into  moonlight.intranet:/home/tomash/src/mysql_ab/mysql-5.0-bug18819


mysql-test/r/innodb_mysql.result:
  Auto merged
mysql-test/t/innodb_mysql.test:
  Auto merged
sql/sql_delete.cc:
  Auto merged

into  moonlight.intranet:/home/tomash/src/mysql_ab/mysql-5.0-bug18819


mysql-test/r/innodb_mysql.result:
  Manual merge.
mysql-test/t/innodb_mysql.test:
  Manual merge.
sql/sql_delete.cc:
  Manual merge.

If the error happens during DELETE IGNORE, nothing could be send to the
client, thus leaving it frozen expecting the reply.

The problem was that if some error occurred, it wouldn't be reported to
the client because of IGNORE, but neither success would be reported.

MySQL 4.1 would not freeze the client, but will report

  ERROR 1105 (HY000): Unknown error

instead, which is also a bug.

The solution is to report success if we are in DELETE IGNORE and some
non-fatal error has happened.


mysql-test/r/innodb_mysql.result:
  Add result for bug#18819: DELETE IGNORE hangs on foreign key parent
  delete.
mysql-test/t/innodb_mysql.test:
  Add test case for bug#18819: DELETE IGNORE hangs on foreign key parent
  delete.
sql/sql_delete.cc:
  Report success if we have got an error, but we are in DELETE IGNORE, and
  the error is not fatal (if it is, it would be reported to the client).

into  bodhi.local:/opt/local/work/mysql-5.0-runtime-merge


mysql-test/t/func_gconcat.test:
  Auto merged
sql/item_func.cc:
  Auto merged
sql/sql_base.cc:
  Auto merged
sql/sql_insert.cc:
  Auto merged
sql/sql_lex.cc:
  Auto merged
sql/sql_lex.h:
  Auto merged
sql/sql_select.cc:
  Auto merged
sql/sql_update.cc:
  Auto merged
mysql-test/r/view.result:
  Manual merge.
mysql-test/t/view.test:
  Manual merge.

into  dl145s.mysql.com:/data/bk/team_tree_merge/MERGE/mysql-5.0-opt

  Raised version number to 5.0.28


configure.in:
  Raised version number to 5.0.28

into  mysql.com:/Users/kent/mysql/bk/mysql-5.0


configure.in:
  Auto merged

  Copy udf examples and raid.h
  Create target "include" directory before copying files to it
CMakeLists.txt:
  Only compile in bdb if configured
configure.in:
  Raised version number to 5.0.27


scripts/make_win_bin_dist:
  Copy udf examples and raid.h
  Create target "include" directory before copying files to it
CMakeLists.txt:
  Only compile in bdb if configured
configure.in:
  Raised version number to 5.0.27

Revert 1 June change enough to restore ABI compatibility with previous
versions.


include/mysql.h:
  Revert patch that breaks ABI compatibility
libmysqld/lib_sql.cc:
  Remove useless assignment.

server-tools/instance-manager/guardian.cc:
  1. Removed unused stop_instances_arg from request_shutdown() and
  stop_instances() methods.
  
  2. Changed log-output statements so that instance name is passed
  correctly (char *, not LEX_STRING)
server-tools/instance-manager/guardian.h:
  Removed unused stop_instances_arg from request_shutdown() and
  stop_instances() methods.
server-tools/instance-manager/instance.cc:
  Removed unused stop_instances_arg from request_shutdown() and
  stop_instances() methods.
server-tools/instance-manager/listener.cc:
  Be more verbose in log.
server-tools/instance-manager/manager.cc:
  Removed unused stop_instances argument.

into  mockturtle.local:/home/dlenev/src/mysql-5.0-bg15228-2


sql/sql_trigger.cc:
  Auto merged
sql/sql_view.cc:
  Auto merged

warnings in sql_trigger.cc and sql_view.cc".

According to the current version of C++ standard offsetof() macro
can't be used for non-POD types. So warnings were emitted when we
tried to use this macro for TABLE_LIST and Table_triggers_list
classes. Note that despite of these warnings it was probably safe
thing to do.

This fix tries to circumvent this limitation by implementing
custom version of offsetof() macro to be used with these
classes. This hack should go away once we will refactor
File_parser class.

Alternative approaches such as disabling this warning for
sql_trigger.cc/sql_view.cc or for the whole server were
considered less explicit. Also I was unable to find a way
to disable particular warning for particular _part_ of
file in GCC.


sql/parse_file.h:
  Introduced auxillary macro which can be used instead of offsetof()
  to get offsets of members in class for non-POD types without getting
  warnings (assuming that all instances of the class has same offsets
  for same members).
sql/sql_trigger.cc:
  Use my_offsetof() macro instead of standard offsetof() macro with
  Table_triggers_list class in order to avoid warnings (offsetof()
  cannot be used for non-POD types according to the standard).
sql/sql_view.cc:
  Use my_offsetof() macro instead of standard offsetof() macro with
  TABLE_LIST class in order to avoid warnings (offsetof() cannot
  be used for non-POD types according to the standard).

into  dl145s.mysql.com:/data/bk/team_tree_merge/MERGE/mysql-5.0-opt


sql/sql_base.cc:
  Auto merged
sql/sql_select.cc:
  Auto merged

into  dl145s.mysql.com:/data/bk/team_tree_merge/MERGE/mysql-5.0-opt


mysql-test/r/myisam.result:
  Auto merged
sql/mysql_priv.h:
  Auto merged
sql/sql_base.cc:
  Auto merged
sql/sql_select.cc:
  Auto merged

into  dl145s.mysql.com:/data/bk/team_tree_merge/MERGE/mysql-4.1-opt


sql/sql_base.cc:
  Auto merged
sql/sql_select.cc:
  Auto merged

This patch reverts a change introduced by Bug 6951, which incorrectly
set thd->abort_on_warning for stored procedures.

As per internal discussions about the SQL_MODE=TRADITIONAL,
the correct behavior is to *not* abort on warnings even inside an INSERT/UPDATE
trigger.

Tests for Stored Procedures, Stored Functions, Triggers involving SQL_MODE
have been included or revised, to reflect the intended behavior.

(reposting approved patch, to work around source control issues, no review needed)


mysql-test/include/sp-vars.inc:
  Tests for SQL_MODE='TRADITIONAL'
mysql-test/r/sp-vars.result:
  Tests for SQL_MODE='TRADITIONAL'
mysql-test/r/sp.result:
  Tests for SQL_MODE='TRADITIONAL'
mysql-test/r/trigger.result:
  Tests for SQL_MODE='TRADITIONAL'
mysql-test/t/sp-vars.test:
  Tests for SQL_MODE='TRADITIONAL'
mysql-test/t/sp.test:
  Tests for SQL_MODE='TRADITIONAL'
mysql-test/t/trigger.test:
  Tests for SQL_MODE='TRADITIONAL'
sql/sp_head.cc:
  For SQL_MODE='TRADITIONAL',
  thd->abort_on_warning should be set only when assigning a *column*

into  mysql.com:/home/svoj/devel/mysql/engines/mysql-5.0-engines


myisam/sort.c:
  Auto merged
mysql-test/r/repair.result:
  Auto merged
mysql-test/t/repair.test:
  Auto merged
sql/sql_base.cc:
  Use local.

into  dl145s.mysql.com:/data/bk/team_tree_merge/MERGE/mysql-5.0-opt


sql/sql_select.cc:
  Auto merged
mysql-test/r/olap.result:
  SCCS merged

into  dl145s.mysql.com:/data/bk/team_tree_merge/MERGE/mysql-5.0-opt


mysql-test/r/merge.result:
  Auto merged
mysql-test/r/myisam.result:
  Auto merged
mysql-test/r/select.result:
  Auto merged
mysql-test/r/view.result:
  Auto merged
sql/item_cmpfunc.cc:
  Auto merged
sql/item_cmpfunc.h:
  Auto merged
sql/mysql_priv.h:
  Auto merged
sql/opt_range.cc:
  Auto merged
sql/opt_range.h:
  Auto merged
sql/sql_select.cc:
  Auto merged
sql/sql_table.cc:
  Auto merged
sql/sql_update.cc:
  Auto merged
sql/table.cc:
  Auto merged

into  mysql.com:/home/svoj/devel/mysql/engines/mysql-4.1-engines


mysql-test/r/repair.result:
  Manual merge.
mysql-test/t/repair.test:
  Manual merge.

into  dl145s.mysql.com:/data/bk/team_tree_merge/MERGE/mysql-4.1-opt


sql/sql_select.cc:
  Auto merged

into  mysql.com:/home/svoj/devel/mysql/engines/mysql-4.1-engines

Backport from 5.1.
Raised STACK_MIN_SIZE for Debian GNU/Linux Sid,
Linux kernel 2.6.16,
gcc version 3.3.6 (Debian 1:3.3.6-13),
libc6-dbg 2.3.6.ds1-4,
Pentium4 (x86),
BUILD/compile-pentium-debug-max
Raised about 100 Bytes above the required minimum.

into  moonlight.intranet:/home/tomash/src/mysql_ab/mysql-5.0-bug21856


sql/sql_parse.cc:
  Auto merged
mysql-test/r/ps.result:
  Manual merge.
mysql-test/t/ps.test:
  Manual merge.

When statement to be prepared contained CREATE PROCEDURE, CREATE FUNCTION
or CREATE TRIGGER statements with a syntax error in it, the preparation
would fail with syntax error message, but the memory could be corrupted.

The problem occurred because we switch memroot when parse stored
routine or trigger definitions, and on parse error we restored the
original memroot only after performing some memory operations.  In more
detail:
 - prepared statement would activate its own memory root to parse
   the definition of the stored procedure.
 - SP would reset this memory root with its own memory root to
   parse SP statements
 - a syntax error would happen
 - prepared statement would restore the original memory root
 - stored procedure would restore what it thinks was the original
   memory root, but actually was the statement memory root.
That led to double free - in destruction of the statement and in
a next call to mysql_parse().

The solution is to restore memroot right after the failed parsing.


mysql-test/r/ps.result:
  Add result for bug#21856: Prepared Statements: crash if bad create.
mysql-test/t/ps.test:
  Add test case for bug#21856: Prepared Statements: crash if bad create.
sql/sql_parse.cc:
  On parse error if thd->lex->sphead is set we have to free sp_head object
  to restore statement memroot, if it was switched during parsing.
  
  The change here is for safety, currently query_cache_abort() and
  lex->unit.cleanup() calls do not use current memroot.
sql/sql_prepare.cc:
  On parse error if thd->lex->sphead is set we have to free sp_head object
  to restore statement memroot, if it was switched during parsing.

into  chilla.local:/home/mydev/mysql-5.0-merge


include/my_sys.h:
  Auto merged
sql/sql_select.cc:
  Auto merged

into  chilla.local:/home/mydev/mysql-5.0-merge


sql/sql_select.cc:
  Auto merged

into  chilla.local:/home/mydev/mysql-4.1-merge

into  mysql.com:/data0/bk/mysql-5.0-kt

Repair table could crash a server if there is not sufficient
memory (myisam_sort_buffer_size) to operate. Affects not only
repair, but also all statements that use create index by sort:
repair by sort, parallel repair, bulk insert.

Return an error if there is not sufficient memory to store at
least one key per BUFFPEK.

Also fixed memory leak if thr_find_all_keys returns an error.


myisam/sort.c:
  maxbuffer is number of BUFFPEK-s for repair. It is calculated
  as records / keys. keys is number of keys that can be stored
  in memory (myisam_sort_buffer_size). There must be sufficient
  memory to store both BUFFPEK-s and keys. It was checked
  correctly before this patch. However there is another
  requirement that wasn't checked: there must be sufficient
  memory for at least one key per BUFFPEK, otherwise repair
  by sort/parallel repair cannot operate.
  
  Return an error if there is not sufficient memory to store at
  least one key per BUFFPEK.
  
  Also fixed memory leak if thr_find_all_keys returns an error.
mysql-test/r/repair.result:
  A test case for BUG#23175.
mysql-test/t/repair.test:
  A test case for BUG#23175.