into  rakia.(none):/home/kgeorge/mysql/autopush/B20792-4.1-opt

into  rakia.(none):/home/kgeorge/mysql/autopush/B20792-4.1-opt

When processing aggregate functions all tables values are reset
to NULLs at the end of each group. 
When doing that if there are no rows found for a group
the const tables must not be reset as they are not recalculated 
by do_select()/sub_select() for each group.

into  rakia.(none):/home/kgeorge/mysql/autopush/B21019-4.1-opt

 When optimizing conditions like 'a = <some_val> OR a IS NULL' so that they're
 united into a single condition on the key and checked together the server must 
 check which value is the NULL value in a correct way : not only using ->is_null 
 but also check if the expression doesn't depend on any tables referenced in the 
 current statement. 
 This additional check must be performed because that optimization takes place 
 before the actual execution of the statement, so if the field was initialized 
 to NULL from a previous statement the optimization would be applied incorrectly.

into  lamia.home:/home/tkatchaounov/autopush/4.1-bug-20954

The problem was in that opt_sum_query() replaced MIN/MAX functions
with the corresponding constant found in a key, but due to imprecise
representation of float numbers, when evaluating the where clause,
this comparison failed.

When MIN/MAX optimization detects that all tables can be removed,
also remove all conjuncts in a where clause that refer to these
tables. As a result of this fix, these conditions are not evaluated
twice, and in the case of float number comparisons we do not discard
result rows due to imprecise float representation.

As a side-effect this fix also corrects an unnoticed problem in
bug 12882.

  Add implementations of Item_func_{nop,not}_all::neg_transformer

for class Item_func_trim. 
For 4.1 it caused wrong output for EXPLAIN EXTENDED commands
if expressions with the TRIM function of two arguments were used.
For 5.0 it caused an error message when trying to select
from a view with the TRIM function of two arguments.
This unexpected error message was due to the fact that the
print method for the class Item_func_trim was inherited from
the class Item_func. Yet the TRIM function does not take a list
of its arguments. Rather it takes the arguments in the form:
  [{BOTH | LEADING | TRAILING} [remstr] FROM] str) |
  [remstr FROM] str

into  moonbone.local:/work/tmp_merge-4.1-opt-mysql

into  rakia.(none):/home/kgeorge/mysql/autopush/B17212-4.1-opt

do not look for client-specific commands while inside a multi-line comment.
we will allow multi-comments pretty much anywhere within SQL-statements,
but client-specific commands (help, use, print, ...) must be the first token
in the input.

  * don't use join cache when the incoming data set is already ordered
    for ORDER BY
    This choice must be made because join cache will effectively
    reverse the join order and the results will be sorted by the index
    of the table that uses join cache.

into  moonbone.local:/work/16302-bug-4.1-opt-mysql

into  moonbone.local:/work/18503-bug-4.1-mysql

may return a wrong result.

An Item_sum_hybrid object has the was_values flag which indicates whether any
values were added to the sum function. By default it is set to true and reset
to false on any no_rows_in_result() call. This method is called only in
return_zero_rows() function. An ALL/ANY subquery can be optimized by MIN/MAX
optimization. The was_values flag is used to indicate whether the subquery
has returned at least one row. This bug occurs because return_zero_rows() is
called only when we know that the select will return zero rows before
starting any scans but often such information is not known.
In the reported case the return_zero_rows() function is not called and
the was_values flag is not reset to false and yet the subquery return no rows
Item_func_not_all and Item_func_nop_all functions return a wrong
comparison result.

The end_send_group() function now calls no_rows_in_result() for each item
in the fields_list if there is no rows were found for the (sub)query.

    
The problem is that the author used the wrong function to send a warning to the 
user about truncation of data.  push_warning() takes a constant string and 
push_warning_printf() takes a format and variable arguments to fill it.

Since the string we were complaining about contains percent characters, the 
printf() code interprets the "%Y" et c. that the user sends.  That's wrong, and
often causes a crash, especially if the date mentions seconds, "%s".

A alternate fix would be to use  push_warning_printf(..., "%s", warn_buff) .

into  moonbone.local:/work/16302-bug-4.1-opt-mysql

into  moonbone.local:/home/evgen/bk-trees/mysql-4.1-opt

into  moonbone.local:/work/allany-4.1-mysql

The ALL/ANY subqueries are the subject of MIN/MAX optimization. The matter
of this optimization is to embed MIN() or MAX() function into the subquery
in order to get only one row by which we can tell whether the expression
with ALL/ANY subquery is true or false.
But when it is applied to a subquery like 'select a_constant' the reported bug
occurs. As no tables are specified in the subquery the do_select() function 
isn't called for the optimized subquery and thus no values have been added 
to a MIN()/MAX() function and it returns NULL instead of a_constant.
This leads to a wrong query result.

For the subquery like 'select a_constant' there is no reason to apply
MIN/MAX optimization because the subquery anyway will return at most one row.
Thus the Item_maxmin_subselect class is more appropriate for handling such
subqueries.

The Item_in_subselect::single_value_transformer() function now checks
whether tables are specified for the subquery. If no then this subselect is
handled like a UNION using an Item_maxmin_subselect object.

into  macbook.gmz:/Users/kgeorge/mysql/work/B14553-4.1-opt

To make MySQL compatible with some ODBC applications, you can find
the AUTO_INCREMENT value for the last inserted row with the following query:
 SELECT * FROM tbl_name WHERE auto_col IS NULL.
This is done with a special code that replaces 'auto_col IS NULL' with
'auto_col = LAST_INSERT_ID'.
However this also resets the LAST_INSERT_ID to 0 as it uses it for a flag
so as to ensure that only the first SELECT ... WHERE auto_col IS NULL
after an INSERT has this special behaviour.
In order to avoid resetting the LAST_INSERT_ID a special flag is introduced
in the THD class. This flag is used to restrict the second and subsequent
SELECTs instead of LAST_INSERT_ID.

into  olga.mysql.com:/home/igor/mysql-4.1-opt

The implementation of the method Item_func_reverse::val_str
for the REVERSE function modified the argument of the function.
This led to wrong results for expressions that contained
REVERSE(ref) if ref occurred somewhere else in the expressions.

into mysql.com:/M41/bug20216-4.1

(implemented by by Josh Chamas)

into  mysql.com:/home/psergey/mysql-4.1-bug16168-push

into  mysql.com:/home/my/mysql-4.1

into  mysql.com:/home/my/mysql-4.1

into  poseidon.ndb.mysql.com:/home/tomas/mysql-4.1-main

into  mysql.com:/home/my/mysql-4.1

into  poseidon.ndb.mysql.com:/home/tomas/mysql-4.1-main

- added missing retrieval of hidden primary key

into  mysql.com:/home/tomash/src/mysql_ab/mysql-4.1-bug20152

When using a parameter bind MYSQL_TYPE_DATE in a prepared statement,
the time part of the MYSQL_TIME buffer was written to zero in
mysql_stmt_execute(). The param_store_date() function in libmysql.c
worked directly on the provided buffer.
Changed to use a copy of the buffer.

 - Added comments.
 - Make SEL_ARG::clone() set SEL_ARG::elements in the created copy.