into  weblab.(none):/home/marcsql/TREE/mysql-5.1-rt50-merge

into  weblab.(none):/home/marcsql/TREE/mysql-5.1-rt50-merge

into  moksha.local:/Users/davi/mysql/push/bugs/28587-5.1

The problem is that a SELECT on one thread is blocked by INSERT ... ON
DUPLICATE KEY UPDATE on another thread even when low_priority_updates is
activated.

The solution is to possibly downgrade the lock type to the setting of
low_priority_updates if the INSERT cannot be concurrent.

into  weblab.(none):/home/marcsql/TREE/mysql-5.1-rt50-merge

comments)

This change set is for 5.1 (manually merged)

Before this fix, the server would accept queries that contained comments,
even when the comments were not properly closed with a '*' '/' marker.

For example,
  select 1 /* + 2 <EOF>
would be accepted as
  select 1 /* + 2 */ <EOF>
and executed as
  select 1

With this fix, the server now rejects queries with unclosed comments
as syntax errors.
Both regular comments ('/' '*') and special comments ('/' '*' '!') must be
closed with '*' '/' to be parsed correctly.

generated so many warnings that the mode was unusable.

into  weblab.(none):/home/marcsql/TREE/mysql-5.1-rt50-merge

into  weblab.(none):/home/marcsql/TREE/mysql-5.0-28779-b

PREPARE and EXECUTE of statement breaks binlog.

into  polly.(none):/home/kaa/src/bug30164/my51-bug30164

Use double quotes instead of single ones which make the test fail on Windows. This is for bug #30164.

into  polly.(none):/home/kaa/src/bug30164/my51-bug30164

  
Problem:
  
In cases when a client-side macro appears inside a server-side comment, the add_line() function in mysql.cc discarded all characters until the next delimiter to remove macro arguments from the query string. This resulted in broken queries being sent to the server when the next delimiter character appeared past the comment's boundaries, because the comment closing sequence ('*/') was discarded.
  
Fix:
  
If a client-side macro appears inside a server-side comment, discard all characters in the comment after the macro (that is, until the end of the comment rather than the next delimiter).
This is a minimal fix to allow only simple cases used by the mysqlbinlog utility. Limitations that are worth documenting:
  
- Nested server-side and/or client-side comments are not supported by mysql.cc
- Using client-side macros in multi-line server-side comments is not supported
- All characters after a client-side macro in a server-side comment will be omitted from the query string (and thus, will not be sent to server).

into  weblab.(none):/home/marcsql/TREE/mysql-5.1-rt50-merge

into  moksha.local:/Users/davi/mysql/push/bugs/30632-5.1

comments)

Before this fix, the server would accept queries that contained comments,
even when the comments were not properly closed with a '*' '/' marker.

For example,
  select 1 /* + 2 <EOF>
would be accepted as
  select 1 /* + 2 */ <EOF>
and executed as
  select 1

With this fix, the server now rejects queries with unclosed comments
as syntax errors.
Both regular comments ('/' '*') and special comments ('/' '*' '!') must be
closed with '*' '/' to be parsed correctly.

Bug#21422 GRANT/REVOKE possible inside stored function, probably in a trigger
Bug#17244 GRANT gives strange error message when used in a stored function

GRANT/REVOKE statements are non-transactional (no explicit transaction
boundaries) in nature and hence are forbidden inside stored functions and
triggers, but they weren't being effectively forbidden. Furthermore, the
absence of implict commits makes changes made by GRANT/REVOKE statements to
not be rolled back.

The implemented fix is to issue a implicit commit with every GRANT/REVOKE
statement, effectively prohibiting these statements in stored functions
and triggers. The implicit commit also fixes the replication bug, and looks
like being in concert with the behavior of DDL and administrative statements.

Since this is a incompatible change, the following sentence should be
added to the Manual in the very end of the 3rd paragraph, subclause
13.4.3 "Statements That Cause an Implicit Commit": "Beginning with
MySQL 5.0.??, the GRANT and REVOKE statements cause an implicit commit."

Patch contributed by Vladimir Shebordaev

seems to be converted as varbinary.

The bug has been already fixed. This CS just adds a test case for it.

into  weblab.(none):/home/marcsql/TREE/mysql-5.1-rt50-merge

into  moksha.local:/Users/davi/mysql/push/mysql-5.0-runtime

into  weblab.(none):/home/marcsql/TREE/mysql-5.1-rt50-merge

This is a performance bug, affecting in particular the bison generated code
for the parser.

Prior to this fix, the grammar used a long chain of reduces to parse an
expression, like:
  bit_expr -> bit_term
  bit_term -> bit_factor
  bit_factor -> value_expr
  value_expr -> term
  term -> factor
etc

This chain of reduces cause the internal state automaton in the generated
parser to execute more state transitions and more reduces, so that the
generated MySQLParse() function would spend a lot of time looping to execute
all the grammar reductions.

With this patch, the grammar has been reorganized so that rules are more
"flat", limiting the depth of reduces needed to parse <expr>.

Tests have been written to enforce that relative priorities and properties
of operators have not changed while changing the grammar.

See the bug report for performance data.

into  bk-internal.mysql.com:/data0/bk/mysql-5.1-arch

If, after the tables are locked, one of the conditions to read from a
HANDLER table is not met, the handler code wrongly jumps to a error path
that won't unlock the tables.

The user-visible effect is that after a error in a handler read command,
all subsequent handler operations on the same table will hang.

The fix is simply to correct the code to jump to the (same) error path that
unlocks the tables.

into  moksha.local:/Users/davi/mysql/push/bugs/29936-5.1

into  moksha.local:/Users/davi/mysql/push/bugs/25164-5.1

The problem from a user's perspective: user creates table A, and then tries
to CREATE TABLE a SELECT from A - and this causes a deadlock error, a hang,
or fails with a debug assert, but only if the storage engine is InnoDB.

The origin of the problem: InnoDB uses case-insensitive collation
(system_charset_info) when looking up the internal table share, thus returning
the same share for 'a' and 'A'.

Cause of the user-visible behavior: since the same share is returned to SQL
locking subsystem, it assumes that the same table is first locked (within the
same session) for WRITE, and then for READ, and returns a deadlock error.
However, the code is wrong in not properly cleaning up upon an error, leaving
external locks in place, which leads to assertion failures and hangs.

Fix that has been implemented: the SQL layer should properly propagate the
deadlock error, cleaning up and freeing all resources.

Further work towards a more complete solution: InnoDB should not use case
insensitive collation for table share hash if table names on disk honor the case.

into  pippilotta.erinye.com:/shared/home/df/mysql/build/mysql-5.1-build

into  mysql.com:/data0/mysqldev/my/build-200708231546-5.0.48/mysql-5.0-release

into  a88-113-38-195.elisa-laajakaista.fi:/home/my/bk/mysql-5.1-marvel

into  a88-113-38-195.elisa-laajakaista.fi:/home/my/bk/mysql-5.1-marvel

into  a88-113-38-195.elisa-laajakaista.fi:/home/my/bk/mysql-5.0-marvel

This test case uses the wait_condition helper (only available in 5.1) in order to wait till the select/update opens and locks the table.