into  gbichot3.local:/home/mysql_src/mysql-5.0

into  dsl-hkigw8-feb1fb00-100.dhcp.inet.fi:/usr_rh9/home/elkin.rh9/MySQL/TEAM/FIXES/5.0/20919_temp_nlog


sql/sql_base.cc:
  Manual merge

closing temp tables through end_thread
had a flaw in binlog-off branch of close_temporary_tables where
next table to close was reset via table->next
 for (table= thd->temporary_tables; table; table= table->next)
which was wrong since the current table instance got destoyed at
	close_temporary(table, 1);

The fix adapts binlog-on branch method to engage the loop's internal 'next' variable which holds table->next prior table's destoying.



sql/sql_base.cc:
  no-binlog branch is fixed: scanning across temporary_tables must be careful to save next table since the current is being destroyed inside of close_temporary. 
  binlog-is-open case is ok.

into  gbichot3.local:/home/mysql_src/mysql-5.0

into  gbichot3.local:/home/mysql_src/mysql-5.0


sql/handler.cc:
  Auto merged
sql/handler.h:
  Auto merged
sql/sql_insert.cc:
  Auto merged

a too large value": the bug was that if MySQL generated a value for an
auto_increment column, based on auto_increment_* variables, and this value
was bigger than the column's max possible value, then that max possible
value was inserted (after issuing a warning). But this didn't honour
auto_increment_* variables (and so could cause conflicts in a master-master
replication where one master is supposed to generated only even numbers,
and the other only odd numbers), so now we "round down" this max possible
value to honour auto_increment_* variables, before inserting it.


mysql-test/r/rpl_auto_increment.result:
  result update. Before the fix, the result was that master inserted 127 in t1
  (which didn't honour auto_increment_* variables!),
  instead of failing with "duplicate key 125" like now.
mysql-test/t/rpl_auto_increment.test:
  Test for BUG#20524 "auto_increment_* not observed when inserting
  a too large value".
  We also check the pathological case (table t2) where it's impossible to
  "round down".
  The fixer of BUG#20573 will be able to use table t2 for testing his fix.
sql/handler.cc:
  If handler::update_auto_increment() generates a value larger than the field's
  max possible value, we used to simply insert this max possible value
  (after pushing a warning). Now we "round down" this max possible value to
  honour auto_increment_* variables (if at all possible), before trying the
  insertion.

auto_increment breaks binlog":
if slave's table had a higher auto_increment counter than master's (even
though all rows of the two tables were identical), then in some cases,
REPLACE and INSERT ON DUPLICATE KEY UPDATE failed to replicate
statement-based (it inserted different values on slave from on master).
write_record() contained a "thd->next_insert_id=0" to force an adjustment
of thd->next_insert_id after the update or replacement. But it is this
assigment introduced indeterminism of the statement on the slave, thus
the bug. For ON DUPLICATE, we replace that assignment by a call to
handler::adjust_next_insert_id_after_explicit_value() which is deterministic
(does not depend on slave table's autoinc counter). For REPLACE, this
assignment can simply be removed (as REPLACE can't insert a number larger
than thd->next_insert_id).
We also move a too early restore_auto_increment() down to when we really know
that we can restore the value.


mysql-test/r/rpl_insert_id.result:
  result update, without the bugfix, slave's "3 350" were "4 350".
mysql-test/t/rpl_insert_id.test:
  test for BUG#20188 "REPLACE or ON DUPLICATE KEY UPDATE in
  auto_increment breaks binlog".
  There is, in this order:
  - a test of the bug for the case of REPLACE
  - a test of basic ON DUPLICATE KEY UPDATE functionality which was not
  tested before
  - a test of the bug for the case of ON DUPLICATE KEY UPDATE
sql/handler.cc:
  the adjustment of next_insert_id if inserting a big explicit value, is
  moved to a separate method to be used elsewhere.
sql/handler.h:
  see handler.cc
sql/sql_insert.cc:
  restore_auto_increment() means "I know I won't use this autogenerated
  autoincrement value, you are free to reuse it for next row". But we were
  calling restore_auto_increment() in the case of REPLACE: if write_row() fails
  inserting the row, we don't know that we won't use the value, as we are going to
  try again by doing internally an UPDATE of the existing row, or a DELETE
  of the existing row and then an INSERT. So I move restore_auto_increment()
  further down, when we know for sure we failed all possibilities for the row.
  Additionally, in case of REPLACE, we don't need to reset THD::next_insert_id:
  the value of thd->next_insert_id will be suitable for the next row.
  In case of ON DUPLICATE KEY UPDATE, resetting thd->next_insert_id is also
  wrong (breaks statement-based binlog), but cannot simply be removed, as
  thd->next_insert_id must be adjusted if the explicit value exceeds it.
  We now do the adjustment by calling
  handler::adjust_next_insert_id_after_explicit_value() (which, contrary to
  thd->next_insert_id=0, does not depend on the slave table's autoinc counter,
  and so is deterministic).

into  mysql.com:/users/lthalmann/bkroot/mysql-5.0-rpl

 Disabling 'rpl_openssl'.


mysql-test/t/rpl_openssl.test:
  Disabling 'rpl_openssl'.

 Enabling rpl_openssl.test for Windows to check that
 currently it still hangs (because I can't reproduce
 this on my machine).


mysql-test/t/rpl_openssl.test:
  Enabling rpl_openssl.test for Windows

into  mysql.com:/users/lthalmann/bk/MERGE/mysql-5.0-merge


sql/ha_ndbcluster.cc:
  Auto merged

into  poseidon.ndb.mysql.com:/home/tomas/mysql-5.0


sql/ha_ndbcluster.cc:
  manual merge

+ adopted signal to be as close as possible to 5.1...

into  mysql.com:/users/lthalmann/bk/MERGE/mysql-5.0-merge


sql/ha_ndbcluster.cc:
  Auto merged

In the Windows build files, the "Max nt" configuration for some reason
had the mysql_client_test project disabled. Enable it.


VC++Files/mysql.sln:
  The "Max nt" configuration for some reason had the mysql_client_test
  project disabled. Enable it.

Improved definition of mysys configuration for -nt builds.


VC++Files/mysql.sln:
  Use the name 'nt' instead of 'Release' for configuration.
VC++Files/mysys/mysys.vcproj:
  Use the name 'nt' instead of 'Release' for configuration.
  Use separate output files for NT and non-NT configurations.

Make sure for the mysys project that __NT__ is defined in *nt solution
configurations (but not in other configurations).


VC++Files/mysql.sln:
  Define __NT__ in mysys for *nt configurations.
VC++Files/mysys/mysys.vcproj:
  Add configurations with __NT__ defined.
mysql-test/mysql-test-run.pl:
  Also allow testing a "Max nt" build.

into  mysql.com:/home/alexi/bugs/mysql-5.0-19208

 and BUG#19208 "Test 'rpl000017' hangs on Windows".
 Both bugs are caused by attempting to delete an opened
 file and to create immediatedly a new one with the same
 name. On Windows it can be supported only on NT-platforms
 (by using FILE_SHARE_DELETE mode and with renaming the
 file before deletion). Because deleting not-closed files
 is not supported on all platforms (e.g. Win 98|ME) this
 is to be considered harmful and should be eliminated by
 a "code redesign".


VC++Files/mysys/mysys.vcproj:
  To be sure that __NT__ is defined for Win configurations.
   Temporary, to be changed in more appropriate way.
include/my_sys.h:
  Adding my_delete_allow_opened to be invoked to delete
   a (possibly) not closed file on Windows NT-platforms.
mysys/my_delete.c:
  Adding nt_share_delete() function implementing
   a (possibly) not closed file deletion on Windows NT.
sql/log.cc:
  MYSQL_LOG::reset_logs(): Deleting usually not
   closed binlog files.

- correction of previous patch

- make sure to allocate just enough pages in the fragments by using the actual
  row count from the backup, to avoid over allocation of pages to fragments, and
  thus avoid the bug


ndb/include/kernel/GlobalSignalNumbers.h:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - distribute fragment complete to all participants to update row count
ndb/include/kernel/signaldata/BackupContinueB.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - time slica writing of fragment info to ctl file
ndb/include/kernel/signaldata/BackupImpl.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - 32 -> 64 bit on bytes and records
  - new signal fragment complete to all participants
ndb/include/kernel/signaldata/BackupSignalData.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - 32 -> 64 bit on bytes and records
ndb/include/kernel/signaldata/DictTabInfo.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - add min and max rows to dict tab info
ndb/include/kernel/signaldata/LqhFrag.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - added min and max rows to add frag req
ndb/include/kernel/signaldata/TupFrag.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - added min and max rows to add frag req
ndb/include/ndbapi/NdbDictionary.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - added get/set of min max rows
ndb/src/common/debugger/signaldata/BackupImpl.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - 32 -> 64 bit on bytes and records
ndb/src/common/debugger/signaldata/BackupSignalData.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - 32 -> 64 bit on bytes and records
ndb/src/common/debugger/signaldata/DictTabInfo.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - added min and max rows to dict tab info
ndb/src/common/debugger/signaldata/LqhFrag.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - added min and max rows to frag req
ndb/src/kernel/blocks/backup/Backup.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - new section in backup with per fragment info in ctl file
  - 32 -> 64 bit on bytes and records
ndb/src/kernel/blocks/backup/Backup.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - new section in backup with per fragment info in ctl file
  - 32 -> 64 bit on bytes and records
ndb/src/kernel/blocks/backup/BackupFormat.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - new section in backup with per fragment info in ctl file
  - 32 -> 64 bit on bytes and records
ndb/src/kernel/blocks/backup/BackupInit.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - new signal fragment complete to all participants
ndb/src/kernel/blocks/dbdict/Dbdict.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - added max and min rows to dict table object
ndb/src/kernel/blocks/dbdict/Dbdict.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - added max and min rows to dict table object
ndb/src/kernel/blocks/dblqh/Dblqh.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - added min and max rows to frag req
ndb/src/kernel/blocks/dblqh/DblqhMain.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - added min and max rows to frag req
ndb/src/kernel/blocks/dbtup/Dbtup.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - added min and max rows to frag req
ndb/src/kernel/blocks/dbtup/DbtupMeta.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - added min and max rows to frag req
  - move memory allocation to fragment to after adding of attributes to get correct headsize
  - allocate pages to fragments according to min rows setting
ndb/src/kernel/blocks/dbtup/DbtupPageMap.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - grow page allocation starting from 2 irrespective of first page allocation
ndb/src/mgmsrv/MgmtSrvr.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - 32 -> 64 bits on bytes and records
ndb/src/mgmsrv/MgmtSrvr.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - 32 -> 64 bits on bytes and records
ndb/src/ndbapi/NdbDictionary.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - min and max rows in dict
ndb/src/ndbapi/NdbDictionaryImpl.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - min and max rows in dict
ndb/src/ndbapi/NdbDictionaryImpl.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - min and max rows in dict
ndb/tools/restore/Restore.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - add retrieval of fragment info
ndb/tools/restore/Restore.hpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - add retrieval of fragment info
ndb/tools/restore/consumer_restore.cpp:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - set min in restore to the actual row count (this is the actual bug fix)
sql/ha_ndbcluster.cc:
  Bug #19852  	Restoring backup made from cluster with full data memory fails
  - set min and max rows according to sql definition

into  mysql.com:/users/lthalmann/bk/MERGE/mysql-5.0-merge

Sometimes the helper connection (that is watching for the main connection
to time out) would itself time out first, causing the test to fail.


mysql-test/t/wait_timeout.test:
  Increase connection timeout in connection wait_con so we will not loose
  the connection that is watching for the real wait_timeout to trigger.

into  poseidon.ndb.mysql.com:/home/tomas/mysql-5.0-main


mysql-test/mysql-test-run.sh:
  Auto merged

into  mysql.com:/users/lthalmann/bk/MERGE/mysql-5.0-merge


sql/ha_ndbcluster.cc:
  Auto merged

into  poseidon.ndb.mysql.com:/home/tomas/mysql-5.0-main

into  poseidon.ndb.mysql.com:/home/tomas/mysql-5.0-main

into  mysql.com:/usr/home/ram/work/mysql-5.0


mysql-test/r/func_str.result:
  Auto merged
mysql-test/t/func_str.test:
  Auto merged
mysql-test/t/func_time.test:
  Auto merged
sql/item_strfunc.cc:
  Auto merged
sql/item_strfunc.h:
  Auto merged
mysql-test/r/func_time.result:
  SCCS merged

  Additional fix for #16377 for bigendian platforms
sql_select.cc, select.result, select.test:
  After merge fix


mysql-test/t/select.test:
  After merge fix
mysql-test/r/select.result:
  After merge fix
sql/sql_select.cc:
  After merge fix
sql/field.h:
  Additional fix for #16377 for bigendian platforms
sql/field.cc:
  Additional fix for #16377 for bigendian platforms

into moonbone.local:/work/tmp_merge-5.0-opt-mysql

into moonbone.local:/work/tmp_merge-4.1-opt-mysql

mysql-test/t/select.test:
  Auto merged
sql/item_cmpfunc.cc:
  Auto merged

  Added test case for bug#18759 Incorrect string to numeric conversion.  
select.test:
  Added test case for bug#18759 Incorrect string to numeric conversion.
item_cmpfunc.cc:
  Cleanup after fix for bug#18360 removal


sql/item_cmpfunc.cc:
  Cleanup after fix for bug#18360 removal
mysql-test/t/select.test:
  Added test case for bug#18759 Incorrect string to numeric conversion.
mysql-test/r/select.result:
  Added test case for bug#18759 Incorrect string to numeric conversion.

mysql-test/r/insert_select.result:
  Auto merged
mysql-test/t/insert_select.test:
  Auto merged