Details:
  - Limit the queries to character sets and collations
    which are most probably available in all build types.
    But try to preserve the intention of the tests.
  - Remove the variants adjusted to some build types.

  Note:
  1. The results of the review by Bar are included.
  2. I am not able to check the correctness of this patch
     on any existing build type and any MySQL version.
     So it could happen that the new test fails somewhere.

Bug #40925: Equality propagation takes non indexed attribute

Query execution plans and execution time of queries like

  select a, b, c from t1
    where a > '2008-11-21' and b = a limit 10

depended on the order of equality operator parameters:
"b = a" and "a = b" are not same. 


An equality propagation algorithm has been fixed:
the substitute_for_best_equal_field function should not
substitute a field for an equal field if both fields belong
to the same table.


mysql-test/r/select.result:
  Added test case for bug #40925.
mysql-test/t/select.test:
  Added test case for bug #40925.
sql/item.cc:
  Bug #40925: Equality propagation takes non indexed attribute
  
  An equality propagation algorithm has been fixed:
  the substitute_for_best_equal_field function should not 
  substitute a field for an equal field if both fields belong
  to the same table.

Turned off autocommit at the start of this test per Innobase recommendation.
Noted significant reduction in run time for this test w/ a minor increase in other tests' run-times.

1) BUG#43309 - Test main.innodb can't be run twice

Detailed revision comments:

r4701 | vasil | 2009-04-13 17:03:46 +0300 (Mon, 13 Apr 2009) | 6 lines
branches/5.0:

Fix Bug#43309 Test main.innodb can't be run twice

by making the innodb.test reentrant.

1) BUG#42279 - Race condition in btr_search_drop_page_hash_when_freed()

Detailed revision comments:

r4031 | marko | 2009-01-23 15:33:46 +0200 (Fri, 23 Jan 2009) | 8 lines
branches/5.0: btr_search_drop_page_hash_when_freed(): Check if
buf_page_get_gen() returns NULL.  The page may have been evicted
from the buffer pool between buf_page_peek_if_search_hashed() and
buf_page_get_gen(), because the buffer pool mutex will be released
between these two calls. (Bug #42279)

rb://82 approved by Heikki Tuuri

                   for indexes of InnoDB table

Fixes by replacing the PRNG that is used to pick random pages with a 
better one. 

Also adds a configuration option "innodb_use_legacy_cardinality_algorithm"
to enable the fix only when the option is set.

This patch is from http://bugs.mysql.com/file.php?id=11789

QUERY statement
      
Commit 55629 applied to 5.0-bugteam and 5.1-bugteam: 
Check for thd->killed in CHECKSUM loop.

mysqldump.test is designed to run with concurrent inserts
disabled. It is disabling concurrent inserts at the very
beginning of the test case, and re-enables them at the
bottom of the test. But for some reason (likely incorrect
merge) we enable concurrent inserts in the middle of the test.

The problem is fixed by enabling concurrent inserts only
at the bottom of the test case.

  to wrong results
      
3 problems found with DES_ENCRYPT/DES_DECRYPT :

1. The max length was not calculated properly. Fixed in fix_length_and_dec()
2. DES_ENCRYPT had a side effect of sometimes reallocating and changing 
the value of its argument. Fixed by explicitly pre-allocating the necessary
space to pad the argument with trailing '*' (stars) when calculating the 
DES digest.
3. in DES_ENCRYPT the string buffer for the result value was not 
reallocated to the correct size and only string length was assigned to it. 
Fixed by making sure there's enough space to hold the result.

information schema tables are based on internal tmp tables which are removed
after each statement execution. So HANDLER comands can not be used with
information schema.


mysql-test/r/handler.result:
  test result
mysql-test/t/handler.test:
  test case
sql/sql_handler.cc:
  information schema tables are based on internal tmp tables which are removed
  after each statement execution. So HANDLER comands can not be used with
  information schema.

Streamlined how we increase the size of our test table.
The new method shows run time decreased by ~60%.
This is not a guarantee that we will not see test timeouts (the random failures noted in the bug),
but it should significantly reduce the chances of this occurring.

fixed message for 'help' command


client/mysql.cc:
  fixed message for 'help' command

routine does not exist 
      
There is an inconsistency with DROP DATABASE IF EXISTS, DROP TABLE IF
EXISTS and DROP VIEW IF EXISTS: those are binlogged even if the DB or
TABLE does not exist, whereas DROP PROCEDURE IF EXISTS does not. It
would be nice or at least consistent if DROP PROCEDURE/STATEMENT
worked the same too.
      
Fixed DROP PROCEDURE|FUNCTION IF EXISTS by adding a call to
mysql_bin_log.write in mysql_execute_command. Checked also if all 
documented "DROP (...) IF EXISTS" get binlogged.
      
NOTE: This is a 5.0 backport patch as requested by support.

mysql-test/r/rpl_drop_if_exists.result:
  Result file for test case added.
mysql-test/r/rpl_sp.result:
  Updated result file for existing test case that has now extra events in
  binary log (the ones from drop if exists procedure/function).
mysql-test/t/rpl_drop_if_exists.test:
  Added test case for asserting validity of proposed patch.
sql/sql_parse.cc:
  Added call mysql_bin_log.write when lex has drop_if_exists enabled for 
  stored procedures.

The crash happens due to wrong 'digits' variable value(0),
'digits' can not be 0, so the fix is use 1 as min allowed value.


mysql-test/r/insert.result:
  test result
mysql-test/t/insert.test:
  test case
sql/field.cc:
  The crash happens due to wrong 'digits' variable value(0),
  'digits' can not be 0, so the fix is use 1 as min allowed value.

While printing the Max keyfile length 'llstr' call was used which 
was treating the max_key_file_length as negative.

Changing this to ullstr fixes the problem. 
myisamchk output will differ in 32 bit and 64 bit Operating systems 
so its not possible to have test case for this bug.


myisam/myisamchk.c:
  Replaced llstr by ullstr, while converting 
  share->base.max_key_file_length-1 to string.

      
The test started failing following the push for BUG#41541.
Some of the algorithms access bytes beyond the input data
and this can affect up to one byte less than "word size"
which is BITS_SAVED / 8. 
      
Fixed by adding (BITS_SAVED / 8) -1 bytes to buffer size
(i.e. Memory Segment #2) to avoid accessing un-allocated data.

myisam/mi_packrec.c:
  Fixed _mi_read_pack_info() method to allocate (BITS_SAVED/8) - 1 
  bytes to the Memory Segment #2
mysql-test/r/myisampack.result:
  Result file for BUG#43973
mysql-test/t/myisampack.test:
  Testcase for BUG#43973

The problem is that a SELECT .. FOR UPDATE statement might open
a table and later wait for a impeding global read lock without
noticing whether it is holding a table that is being waited upon
the the flush phase of the process that took the global read
lock.

The same problem also affected the following statements:

LOCK TABLES .. WRITE
UPDATE .. SET (update and multi-table update)
TRUNCATE TABLE ..
LOAD DATA ..

The solution is to make the above statements wait for a impending
global read lock before opening the tables. If there is no
impending global read lock, the statement raises a temporary
protection against global read locks and progresses smoothly
towards completion.

Important notice: the patch does not try to address all possible
cases, only those which are common and can be fixed unintrusively
enough for 5.0.

mysql-test/r/lock_multi.result:
  Add test case result for Bug#43230
mysql-test/t/lock_multi.test:
  Add test case for Bug#43230
sql/sql_lex.cc:
  Initialize flag.
sql/sql_lex.h:
  Add a flag to the lexer.
sql/sql_parse.cc:
  Wait for the global read lock is a write lock is going to be
  taken. The wait is done before opening tables.
sql/sql_yacc.yy:
  Protect against the GRL if its a SELECT .. FOR UPDATE or LOCK TABLES
  .. WRITE statement.

Bug#32136: mysqld_multi --defaults-file not respected while using \
	--mysqld=mysqld_safe

Revert change that adds "--no-defaults" to mysqld_multi.

This closes Bug#43508 and re-opens Bug#32136.

- Link against setargv.obj for wild-card expansion.

Original commentary:

Bug #37348: Crash in or immediately after JOIN::make_sum_func_list
            
The optimizer pulls up aggregate functions which should be aggregated in
an outer select. At some point it may substitute such a function for a field
in the temporary table. The setup_copy_fields function doesn't take this
into account and may overrun the copy_field buffer.
            
Fixed by filtering out the fields referenced through the specialized
reference for aggregates (Item_aggregate_ref).
Added an assertion to make sure bugs that cause similar discrepancy 
don't go undetected.


mysql-test/r/func_group.result:
  Backport bug #37348 fix 5.1 --> 5.0.
mysql-test/t/func_group.test:
  Backport bug #37348 fix 5.1 --> 5.0.
sql/item.cc:
  Backport bug #37348 fix 5.1 --> 5.0.
sql/item.h:
  Backport bug #37348 fix 5.1 --> 5.0.
sql/sql_select.cc:
  Backport bug #37348 fix 5.1 --> 5.0.

- Link against setargv.obj for wild-card expansion.

more for completeness than for relevance.

Also, update copyright notices.

support-files/mysql.spec.sh:
  Using the occasion of the (late) merge,
  correct the copyright notices.
  
  Note the merge is in 2009, but the code changes were all done in 2008.