- Mis-matched SAFEMALLOC defines caused misleading error message.


client/mysqlbinlog.cc:
  Bug#23736 Pointer free error in mysqlbinlog
  - Re-worked the Load_log_processor so that it frees it's resources before 
  my_end is called.  This is necessary because SAFEMALLOC's _my_free calls
  pthread_mutex_lock() using THR_LOCK_malloc which is cleaned up in my_end().
include/my_sys.h:
  Bug#23736 Pointer free error in mysqlbinlog
  - Define DYNAMIC_ARRAY beofore MY_TMPDIR
  - Add DYNAMIC_ARRAY to MY_TMP_DIR
mysys/array.c:
  Bug#23736 Pointer free error in mysqlbinlog
  - SAFEMALLOC should not be unconditionally undef'd.
mysys/mf_tempdir.c:
  Bug#23736 Pointer free error in mysqlbinlog
  - Use struct's DYNAMIC_ARRAY.
  - Use DYNAMIC_ARRAY:delete_dynamic function instead of my_free

- SAFEMALLOC should be defined for each project in debug Windows builds.
SAFEMALLOC was not defined for the innodb project. Debug asserts caused 
due to mixed SAFEMALLOC defines.


innobase/CMakeLists.txt:
  Bug#25765 too many dbg heap assertions on windows
  - Make sure that *_DEBUG defaults are not overwritten.
  - Define SAFEMALLOC and SAFE_MUTEX for debug innodb builds.

into  quadxeon.mysql.com:/benchmarks/ext3/TOSAVE/tsmith/bk/maint/50

into  quadxeon.mysql.com:/benchmarks/ext3/TOSAVE/tsmith/bk/maint/50

  Removed wrong fix for the bug#27006.
  The bug was added by the fix for the bug#19978 and fixed by Monty on 2007/02/21.
trigger.test, trigger.result:
  Corrected test case for the bug#27006.


sql/sql_insert.cc:
  Removed wrong fix for the bug#27006.
  The bug was added by the fix for the bug#19978 and fixed by Monty on 2007/02/21.
mysql-test/t/trigger.test:
  Corrected test case for the bug#27006.
mysql-test/r/trigger.result:
  Corrected test case for the bug#27006.

UPDATE if the row wasn't actually changed.

This bug was caused by fix for bug#19978. It causes AFTER UPDATE triggers
not firing if a row wasn't actually changed by the update part of the
INSERT .. ON DUPLICATE KEY UPDATE.

Now triggers are always fired if a row is touched by the INSERT ... ON
DUPLICATE KEY UPDATE.


sql/sql_insert.cc:
  Bug#27006: AFTER UPDATE triggers not fired with INSERT ... ON DUPLICATE KEY
  UPDATE if the row wasn't actually changed.
  Now triggers are always fired if a row is touched by the INSERT ... ON
  DUPLICATE KEY UPDATE.
mysql-test/r/trigger.result:
  Added a test case for the bug#27006: AFTER UPDATE triggers not fired with INSERT ... ON DUPLICATE KEY
  UPDATE if the row wasn't actually changed.
mysql-test/t/trigger.test:
  Added a test case for the bug#27006: AFTER UPDATE triggers not fired with INSERT ... ON DUPLICATE KEY
  UPDATE if the row wasn't actually changed.

into  magare.gmz:/home/kgeorge/mysql/autopush/B26261-5.0-opt


sql/mysql_priv.h:
  Auto merged
sql/sql_insert.cc:
  Auto merged
sql/sql_prepare.cc:
  Auto merged
mysql-test/r/insert_update.result:
  SCCS merged
mysql-test/t/insert_update.test:
  SCCS merged

 INSERT uses query_id to verify what fields are
 mentioned in the fields list of the INSERT command.
 However the check for that is made after the 
 ON DUPLICATE KEY is processed. This causes all
 the fields mentioned in ON DUPLICATE KEY to be 
 considered as mentioned in the fields list of 
 INSERT.
 Moved the check up, right after processing the
 fields list.


mysql-test/r/insert_update.result:
  Bug #26261: test case
mysql-test/t/insert_update.test:
  Bug #26261: test case
sql/mysql_priv.h:
  Bug #26261: moved the check inside mysql_prepare_insert
sql/sql_insert.cc:
  Bug #26261: move the check inside mysql_prepare_insert
  before setting up the ON DUPLICATE KEY part
sql/sql_prepare.cc:
  Bug #26261: moved the check inside mysql_prepare_insert

into  mysql.com:/home/gluh/MySQL/Merge/5.0-opt

The crash happens when 'skip-grant-tables' is enabled.
We skip the filling of I_S privilege tables 
if acl_cache is not initialized.


mysql-test/r/skip_grants.result:
  test result
mysql-test/t/skip_grants.test:
  test case
sql/sql_acl.cc:
  skip filling of I_S privilege tables
  if acl_cache is not initialized

into  mysql.com:/home/hf/work/mrg/mysql-5.0-opt

into  mysql.com:/home/hf/work/mrg/mysql-5.0-opt


sql/sql_parse.cc:
  Auto merged

into  mysql.com:/home/svoj/devel/bk/mysql-5.0-engines

into  moonbone.local:/mnt/gentoo64/work/27033-bug-5.0-opt-mysql

touched but not actually changed.

The LAST_INSERT_ID() is reset to 0 if no rows were inserted or changed.
This is the case when an INSERT ... ON DUPLICATE KEY UPDATE updates a row
with the same values as the row contains.

Now the LAST_INSERT_ID() values is reset to 0 only if there were no rows
successfully inserted or touched.
The new 'touched' field is added to the COPY_INFO structure. It holds the
number of rows that were touched no matter whether they were actually
changed or not.


sql/sql_class.h:
  Bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
  touched but not actually changed.
  
  The new 'touched' field is added to the COPY_INFO structure. It holds the
  number of rows that were touched no matter whether they were actually
  changed or not.
mysql-test/r/insert_update.result:
  Added a test case for the bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
  touched but not actually changed.
mysql-test/t/insert_update.test:
  Added a test case for the bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
  touched but not actually changed.
sql/sql_insert.cc:
  Bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
  touched but not actually changed.
  
  Now the LAST_INSERT_ID() values is reset to 0 only if there were no rows
  successfully inserted or touched.

into  mysql.com:/home/hf/work/mrg/mysql-5.0-opt


sql/sql_parse.cc:
  Auto merged

into  mysql.com:/home/hf/work/mrg/mysql-5.0-opt


mysql-test/r/gis-rtree.result:
  Auto merged

into  mockturtle.local:/home/dlenev/src/mysql-4.1-merge

into  mockturtle.local:/home/dlenev/src/mysql-5.0-merge

into  mysql.com:/home/ram/work/b24558/b24558.5.0

into  mockturtle.local:/home/dlenev/src/mysql-5.0-bg25966-2


sql/mysqld.cc:
  Auto merged

TABLE ... WRITE".

Memory and CPU hogging occured when connection which had to wait for table
lock was serviced by thread which previously serviced connection that was
killed (note that connections can reuse threads if thread cache is enabled).
One possible scenario which exposed this problem was when thread which
provided binlog dump to replication slave was implicitly/automatically
killed when the same slave reconnected and started pulling data through
different thread/connection.
The problem also occured when one killed particular query in connection
(using KILL QUERY) and later this connection had to wait for some table
lock.

This problem was caused by the fact that thread-specific mysys_var::abort
variable, which indicates that waiting operations on mysys layer should
be aborted (this includes waiting for table locks), was set by kill
operation but was never reset back. So this value was "inherited" by the
following statements or even other connections (which reused the same
physical thread). Such discrepancy between this variable and THD::killed
flag broke logic on SQL-layer and caused CPU and memory hogging.

This patch tries to fix this problem by properly resetting this member.

There is no test-case associated with this patch since it is hard to test
for memory/CPU hogging conditions in our test-suite.


sql/mysqld.cc:
  We should not forget to reset THD::mysys_var::abort after kill operation
  if we are going to use thread to which this operation was applied for
  handling of other connections.
sql/sp_head.cc:
  We should not forget to reset THD::mysys_var::abort after kill operation
  if we are going to use thread to which this operation was applied for
  handling of further statements.
sql/sql_parse.cc:
  We should not forget to reset THD::mysys_var::abort after kill operation
  if we are going to use thread to which this operation was applied for
  handling of further statements.

TABLE ... WRITE".

CPU hogging occured when connection which had to wait for table lock was
serviced by thread which previously serviced connection that was killed
(note that connections can reuse threads if thread cache is enabled).
One possible scenario which exposed this problem was when thread which
provided binlog dump to replication slave was implicitly/automatically
killed when the same slave reconnected and started pulling data through
different thread/connection.
In 5.* versions memory hogging was added to CPU hogging. Moreover in
those versions the problem also occured when one killed particular query
in connection (using KILL QUERY) and later this connection had to wait for
some table lock.

This problem was caused by the fact that thread-specific mysys_var::abort
variable, which indicates that waiting operations on mysys layer should
be aborted (this includes waiting for table locks), was set by kill
operation but was never reset back. So this value was "inherited" by the
following statements or even other connections (which reused the same
physical thread). Such discrepancy between this variable and THD::killed
flag broke logic on SQL-layer and caused CPU and memory hogging.

This patch tries to fix this problem by properly resetting this member.

There is no test-case associated with this patch since it is hard to test
for memory/CPU hogging conditions in our test-suite.


sql/mysqld.cc:
  We should not forget to reset THD::mysys_var::abort after kill operation
  if we are going to use thread to which this operation was applied for
  handling of other connections.

Altering to a decimal field we get double value then store it 
that may cause data loss. 
Fix: use store_decimal() instead.



mysql-test/r/type_newdecimal.result:
  Fix for bug #24558: Increasing decimal column length causes data loss
    - test result.
mysql-test/t/type_newdecimal.test:
  Fix for bug #24558: Increasing decimal column length causes data loss
    - test case.
sql/field_conv.cc:
  Fix for bug #24558: Increasing decimal column length causes data loss
    - if target field's result type is DECIMAL_RESULT
      use store_decimal(val_decimal()) in order not to loss data.

into  mysql.com:/home/kent/bk/tmp/mysql-5.0-build

into  mysql.com:/home/kent/bk/tmp/mysql-4.1-build

  Updated to version 0.6 of the text


EXCEPTIONS-CLIENT:
  Updated to version 0.6 of the text

into  mysql.com:/home/kent/bk/tmp/mysql-5.0-build


configure.in:
  Auto merged

into  mysql.com:/home/kent/bk/tmp/mysql-5.0-build

into  mysql.com:/home/kent/bk/tmp/mysql-4.1-build

into  mysql.com:/home/kent/bk/tmp/mysql-4.1-build


configure.in:
  SCCS merged

  Added test for sched_yield() possibly in -lposix4 on Solaris


configure.in:
  Added test for sched_yield() possibly in -lposix4 on Solaris

into  magare.gmz:/home/kgeorge/mysql/autopush/B26794-5.0-opt


sql/field.cc:
  Auto merged

Different set of conditions is used to verify
the validity of index definitions over a GEOMETRY
column in ALTER TABLE and CREATE TABLE. 
The difference was on how sub-keys notion validity
is checked.
Fixed by extending the CREATE TABLE condition to
support the cases allowed in ALTER TABLE.
Made the SHOW CREATE TABLE not to display spatial
indexes using the sub-key notion.


mysql-test/r/alter_table.result:
  Bug #26794: test case
mysql-test/r/gis-rtree.result:
  Bug #26794: fixed SHOW CREATE TABLE output.
mysql-test/t/alter_table.test:
  Bug #26794: test case
sql/field.cc:
  Bug #26794: Allow sub-keys for GEOMETRY
sql/sql_show.cc:
  Bug #26794: Don't show sub-key notion 
   in SHOW CREATE TABLE for SPATIAL indexes.
sql/sql_table.cc:
  Bug #26794: Allow sub-keys for GEOMETRY

into  magare.gmz:/home/kgeorge/mysql/autopush/B26672-5.0-opt


mysql-test/r/order_by.result:
  Auto merged
mysql-test/t/order_by.test:
  Auto merged

into  mysql.com:/home/svoj/devel/mysql/BUG26881/mysql-5.0-engines


myisam/mi_create.c:
  Auto merged
mysql-test/t/merge.test:
  Auto merged
sql/ha_myisam.cc:
  Auto merged
sql/sql_parse.cc:
  Use local.
mysql-test/r/merge.result:
  SCCS merged

            differences in tables
Certain merge tables were wrongly reported as having incorrect definition:
- Some fields that are 1 byte long (e.g. TINYINT, CHAR(1)), might
  be internally casted (in certain cases) to a different type on a
  storage engine layer. (affects 4.1 and up)
- If tables in a merge (and a MERGE table itself) had short VARCHAR column (less
  than 4 bytes) and at least one (but not all) tables were ALTER'ed (even to an
  identical table: ALTER TABLE xxx ENGINE=yyy), table definitions went ouf of
  sync. (affects 4.1 only)

This is fixed by relaxing a check for underlying conformance and setting
field type to FIELD_TYPE_STRING in case varchar is shorter than 4
when a table is created.


myisam/mi_create.c:
  Added a comment.
mysql-test/r/merge.result:
  A test case for bug#26881.
mysql-test/t/merge.test:
  A test case for bug#26881.
sql/ha_myisam.cc:
  Relaxed some checks performed by check_definition():
  As comparing of fulltext keys (and key segments) is not yet implemented,
  only return an error in case one of keys is fulltext and other is not.
  Otherwise, if both keys are fulltext, accept them as is.
  
  As comparing of spatial keys (and key segments) is not yet implemented,
  only return an error in case one of keys is spatial and other is not.
  Otherwise, if both keys are spatial, accept them as is.
  
  A workaround to handle situation when field is casted from FIELD_SKIP_ZERO
  to FIELD_NORMAL. This could happen only in case field length is 1 and row
  format is fixed.
sql/sql_parse.cc:
  When a table that has varchar field shorter than 4 is created, field type is
  set to FIELD_TYPE_VAR_STRING. Later, when a table is modified using alter
  table, field type is changed to FIELD_TYPE_STRING (see Field_string::type).
  That means HA_OPTION_PACK_RECORD flag might be lost and thus null_bit might
  be shifted by alter table, in other words alter table doesn't create 100%
  equal table definition.
  
  This is usually not a problem, since when a table is created/altered,
  definition on a storage engine layer is based on one that is passed from
  sql layer. But it is a problem for merge engine - null_bit is shifted when
  a table (merge or underlying) is altered.
  
  Set field type to FIELD_TYPE_STRING in case FIELD_TYPE_VAR_STRING is shorter
  than 4 when a table is created as it is done in Field::type.