No commit message

Delete-mark change buffer records when resorting to a pessimistic
delete from the change buffer B-tree. Skip delete-marked records in
the change buffer merge and when estimating whether an operation can
be buffered. Without this fix, we could try to apply the same buffered
changes multiple times if the server was killed at the right moment.

In MySQL 5.5 and later: ibuf_get_volume_buffered_count_func(): Ignore
delete-marked (already processed) records.

ibuf_delete_rec(): Add a crash point before optimistic delete. If the
optimistic delete fails, flag the record processed before
mtr_commit().

ibuf_merge_or_delete_for_page(): Ignore delete-marked (already
processed) records.

Backport to 5.1: Rename btr_cur_del_unmark_for_ibuf() to
btr_cur_set_deleted_flag_for_ibuf() and add a parameter.

rb:1307 approved by Jimmy Yang

              INC_HOST_ERRORS() IS CALLED.

Issue       : Sequence of calling inc_host_errors()
              and reset_host_errors() required some
              changes in order to maintain correct
              connection error count.

Solution    : Call to reset_host_errors() is shifted
              to a location after which no calls to
              inc_host_errors() are made.

page_zip_validate(), page_zip_validate_low(): Add a parameter for the
B-tree index.

page_zip_validate_low(): If the page contents does not match, check
that the record link chains match. Furthermore, if dict_index_t is
passed, check that the records match. (This reduces coverage a bit: if
index=NULL, we will ignore differences in record contents, that is,
the page payload.)

rb:1264 approved by Inaam Rana

Problem:
=======

trx_data->empty() assert happens at `binlog_close_connection'

Analysis:
========

trx_data->empty() function checks for no pending events
and the transaction cache to be empty.This function returns
"true" if no pending events are present and cache is empty.
Otherwise it returns false. `binlog_close_connection' call
expects the above function to return true. But if the
return value is false then assert is raised.

This bug was reproducible in a diskfull scenario. In this
disk full scenario try to do an insert operation so that
a new pending event is created and flushing this pending
event fails. Due to this failure the server goes down
and invokes `binlog_close_connection' for clean closure.
Since the pending event still remains the assert is caused.
This assert is caused only in non transactional databases.


Fix:
===

In a disk full scenario when the insertion fails the
transaction is rolled back and `binlog_end_trans`
is called to flush the pending events. But flush operation
fails as the disk is full and the function simply returns
`1' without taking any action to delete the pending event.

This leaves the event to remain till the closure of
connection.  `delete pending' statement has been added to 
do the required clean up action.

No commit message

An "orthographic" typo in User_var::set_deferred() was made in fixes for
bug@14275000. While editing the signature of the initial patch to remove
the only argument, the assigned value of the argument remained in the body ... 
to be successfully compiled (!) thanks to names coincidence:
the arg to User_var method and its member.

Fixed with correcting the typo.

In fill_schema_table_by_open(): free item list before restoring active arena.

No commit message

THOUGH IT IS NOT.

The following error message is misleading because it claims 
that the BLOB space is not counted.  

"ERROR 1118 (42000): Row size too large. The maximum row size for 
the used table type, not counting BLOBs, is 8126. You have to 
change some columns to TEXT or BLOBs"

When the ROW_FORMAT=compact or ROW_FORMAT=REDUNDANT is used,
the BLOB prefix is stored inline along with the row.  So 
the above error message is changed as follows depending on
the row format used:

For ROW_FORMAT=COMPRESSED or ROW_FORMAT=DYNAMIC, the error
message is as follows:

"ERROR 42000: Row size too large (> 8126). Changing some
columns to TEXT or BLOB may help. In current row format, 
BLOB prefix of 0 bytes is stored inline."

For ROW_FORMAT=COMPACT or ROW_FORMAT=REDUNDANT, the error
message is as follows:

"ERROR 42000: Row size too large (> 8126). Changing some
columns to TEXT or BLOB or using ROW_FORMAT=DYNAMIC or 
ROW_FORMAT=COMPRESSED may help. In current row
format, BLOB prefix of 768 bytes is stored inline."

rb://1252 approved by Marko Makela

No commit message

PAGE SPLIT

page_rec_get_nth_const(): Map nth==0 to the page infimum.

btr_compress(adjust=TRUE): Add a debug assertion for nth>0. The cursor
should never be positioned on the page infimum.

btr_index_page_validate(): Add test instrumentation for checking the
return values of page_rec_get_nth_const() during CHECK TABLE, and for
checking that the page directory slot 0 always contains only one
record, the predefined page infimum record.

page_cur_delete_rec(), page_delete_rec_list_end(): Add debug
assertions guarding against accessing the page slot 0.

page_copy_rec_list_start(): Clarify a comment about ret_pos==0.

rb:1248 approved by Jimmy Yang

ha_innodb::records_in_range(): Remove a debug assertion
that prohibits an open range (full table).

The patch by Jorgen Loland only removed the assertion from the
built-in InnoDB, not from the InnoDB Plugin.

ha_innobase::records_in_range(): Remove a debug assertion
that prohibits an open range (full table).
This assertion catches unnecessary calls to this method, 
but such calls are not harming correctness.

HEURISTICS FOR COMPRESSED PAGE SIZE

The fix of Bug#12845774 was supposed to skip known-to-fail
btr_cur_optimistic_insert() calls. There was only one such call, in
btr_cur_pessimistic_update(). All other callers of
btr_cur_pessimistic_insert() would release and reacquire the B-tree
page latch before attempting the pessimistic insert. This would allow
other threads to restructure the B-tree, allowing (and requiring) the
insert to succeed as an optimistic (single-page) operation.

Failure to attempt an optimistic insert before a pessimistic one would
trigger an attempt to split an empty page.

rb:1234 approved by Sunny Bains

pre-push fix, removed unused variable.

Additional patch to remove the part_id -> ref_buffer offset.

The partitioning id and the associate record buffer can
be found without having to calculate it.

By initializing it for each used partition, and then reuse
the key-buffer from the queue, it is not needed to have
such map.

Facebook got a case where the page compresses really well so that
btr_cur_optimistic_update() returns DB_UNDERFLOW, but when a record
gets updated, the compression rate radically changes so that
btr_cur_insert_if_possible() can not insert in place despite
reorganizing/recompressing the page, leading to the assertion failing.

rb:1220 approved by Sunny Bains

COMPRESSED PAGE SIZE

This was submitted as MySQL Bug 61456 and a patch provided by
Facebook. This patch follows the same idea, but instead of adding a
parameter to btr_cur_pessimistic_insert(), we simply remove the
btr_cur_optimistic_insert() call there and add it to the only caller
that needs it.

btr_cur_pessimistic_insert(): Do not try btr_cur_optimistic_insert().

btr_insert_on_non_leaf_level_func(): Invoke btr_cur_optimistic_insert()
before invoking btr_cur_pessimistic_insert().

btr_cur_pessimistic_update(): Clarify in a comment why it is not
necessary to invoke btr_cur_optimistic_insert().

btr_root_raise_and_insert(): Assert that the root page is not empty.
This could happen if a pessimistic insert (involving a split or merge)
is performed without first attempting an optimistic (intra-page) insert.

rb:1219 approved by Sunny Bains

btr_cur_optimistic_insert(): Remove a bogus assertion. The insert may
fail after reorganizing the page.

btr_cur_optimistic_update(): Do not attempt to reorganize compressed pages,
because compression may fail after reorganization.

page_copy_rec_list_start(): Use page_rec_get_nth() to restore to the
ret_pos, which may also be the page infimum.

rb:1221

The buffer for the current read row from each partition
(m_ordered_rec_buffer) used for sorted reads was
allocated on open and freed when the ha_partition handler
was closed or destroyed.

For tables with many partitions and big records this could
take up too much valuable memory.

Solution is to only allocate the memory when it is needed
and free it when nolonger needed. I.e. allocate it in
index_init and free it in index_end (and to handle failures
also free it on reset, close etc.)

Also only allocating needed memory, according to
partitioning pruning.

Manually tested that it does not use as much memory and
releases it after queries.

MASTER-MASTER AND USING SET USE

Problem:
=======
In a master-master set-up, a master can show a wrong
'SHOW SLAVE STATUS' output.

Requirements:
- master-master
- log_slave_updates

This is caused when using SET user-variables and then using
it to perform writes. From then on the master that performed
the insert will have a SHOW SLAVE STATUS that is wrong and  
it will never get updated until a write happens on the other
master. On"Master A" the "exec_master_log_pos" is not
getting updated.

Analysis:
========
Slave receives a "User_var" event from the master and after
applying the event, when "log_slave_updates" option is
enabled the slave tries to write this applied event into
its own binary log. At the time of writing this event the
slave should use the "originating server-id". But in the
above case the sever always logs the  "user var events"
by using its global server-id. Due to this in a
"master-master" replication when the event comes back to the
originating server the "User_var_event" doesn't get skipped.
"User_var_events" are context based events and they always
follow with a query event which marks their end of group.
Due to the above mentioned problem with "User_var_event"
logging the "User_var_event" never gets skipped where as
its corresponding "query_event" gets skipped. Hence the
"User_var" event always waits for the next "query event"
and the "Exec_master_log_position" does not get updated
properly.

Fix:
===
`MYSQL_BIN_LOG::write' function is used to write events
into binary log. Within this function a new object for
"User_var_log_event" is created and this new object is used
to write the "User_var" event in the binlog. "User var"
event is inherited from "Log_event". This "Log_event" has
different overloaded constructors. When a "THD" object
is present "Log_event(thd,...)" constructor should be used
to initialise the objects and in the absence of a valid
"THD" object "Log_event()" minimal constructor should be
used. In the above mentioned problem always default minimal
constructor was used which is incorrect. This minimal
constructor is replaced with "Log_event(thd,...)".

               CONNECTIONS IF SPE

Problem description: -ssl-key value is not validated, you can assign any bogus 
text to --ssl-key and it is not verified that it exists, and more importantly, 
it allows the client to connect to mysqld.

Fix: Added proper validations checks for --ssl-key.

Note:
1) Documentation changes require for 5.1, 5.5, 5.6 and trunk in the sections
   listed below and the details are :

 http://dev.mysql.com/doc/refman/5.6/en/ssl-options.html#option_general_ssl
    and
 REQUIRE SSL section of
 http://dev.mysql.com/doc/refman/5.6/en/grant.html

2) Client having with option '--ssl', should able to get ssl connection. This 
will be implemented as part of separate fix in 5.6 and trunk.

When resolving outer fields, Item_field::fix_outer_fields()
creates new Item_refs for each execution of a prepared statement, so
these must be allocated in the runtime memroot. The memroot switching
before resolving JOIN::having causes these to be allocated in the
statement root, leaking memory for each PS execution.

IN QUERIES

This bug was caused by an incorrect fix of
Bug#13807811 BTR_PCUR_RESTORE_POSITION() CAN SKIP A RECORD

There was nothing wrong with btr_pcur_restore_position(), but with the
use of it in the table scan during index creation.

rb:1206 approved by Jimmy Yang

WHEN STDIN IS A PIPE
            
Problem: Mysqlbinlog does not accept the input from STDIN when 
STDIN is a pipe. This prevents the users from passing the input file
through a shell pipe.    

Background: The my_seek() function does not check if the file descriptor
passed to it is regular (seekable) file. The check_header() function in
mysqlbinlog calls the my_b_seek() unconditionally and it fails when
the underlying file is a PIPE.  
            
Resolution: We resolve this problem by checking if the underlying file
is a regular file by using my_fstat() before calling my_b_seek(). 
If the underlying file is not seekable we skip the call to my_b_seek()
in check_header().

             SHOW 2012 INSTEAD OF 2011

* Added a new macro to hold the current year :
  COPYRIGHT_NOTICE_CURRENT_YEAR
* Modified ORACLE_WELCOME_COPYRIGHT_NOTICE macro
  to take the initial year as parameter and pick
  current year from the above mentioned macro.

              AND LIBCRYPTO

Problem: libmysqlclient_r exports symbols from yaSSL library which
         conflict with openSSL symbols. This issue is related to symbols
         used by CURL library and are defined in taocrypt. Taocrypt has
         dummy implementation of these functions. Due to this when a
         program which uses libcurl library functions is compiled using
         libmysqlclient_r and libcurl, it hits segmentation fault in
         execution phase.

Solution: MySQL should not be exporting such symbols. However, these
          functions are not used by MySQL code at all. So avoid compiling
          them in the first place.

Backport the fix from 5.6 to 5.1
Base bug number : 11765562

Space available for merging was calculated incorrectly.

Fixed the missing of federated/include folder at the time 
of preparing package distribution, issue happens only in 5.1