The problem is the async binlog checkpointing; this could on rare
occasions occur too late, causing SHOW BINLOG EVENTS to show the
wrong events and cause .result file difference.

Replication caches the character sets used in a query, to be able to quickly
reuse them for the next query in the common case of them not having changed.

In parallel replication, this caching needs to be per-worker-thread. The
code was not modified to handle this correctly, so the caching in one worker
could cause another worker to run a query using the wrong character set,
causing replication corruption.

Added a new system variable:
default_regex_flags='DOTALL,DUPNAMES,EXTENDED,EXTRA,MULTILINE,UNGREEDY'

Back-ported from the mysql 5.6 code line the patch with
the following comment:

  Fix for Bug#11757108 CHANGE IN EXECUTION PLAN FOR COUNT_DISTINCT_GROUP_ON_KEY
                       CAUSES PEFORMANCE REGRESSION

  The cause for the performance regression is that the access strategy for the
  GROUP BY query is changed form using "index scan" in mysql-5.1 to use "loose
  index scan" in mysql-5.5. The index used for group by is unique and thus each
  "loose scan" group will only contain one record. Since loose scan needs to
  re-position on each "loose scan" group this query will do a re-position for
  each index entry. Compared to just reading the next index entry as a normal
  index scan does, the use of loose scan for this query becomes more expensive.

  The cause for selecting to use loose scan for this query is that in the current
  code when the size of the "loose scan" group is one, the formula for
  calculating the cost estimates becomes almost identical to the cost of using
  normal index scan. Differences in use of integer versus floating point arithmetic
  can cause one or the other access strategy to be selected.

  The main issue with the formula for estimating the cost of using loose scan is
  that it does not take into account that it is more costly to do a re-position
  for each "loose scan" group compared to just reading the next index entry.
  Both index scan and loose scan estimates the cpu cost as:

    "number of entries needed too read/scan" * ROW_EVALUATE_COST

  The results from testing with the query in this bug indicates that the real
  cost for doing re-position four to eight times higher than just reading the
  next index entry. Thus, the cpu cost estimate for loose scan should be increased.
  To account for the extra work to re-position in the index we increase the
  cost for loose index scan to include the cost of navigating the index.
  This is modelled as a function of the height of the b-tree:

    navigation cost= ceil(log(records in table)/log(indexes per block))
                   * ROWID_COMPARE_COST;

  This will avoid loose index scan being used for indexes where the "loose scan"
  group contains very few index entries.

  Not yet done for ODBC tables.
modified:
  storage/connect/connect.cc
  storage/connect/ha_connect.cc
  storage/connect/ha_connect.h
  storage/connect/mycat.cc
  storage/connect/plgdbsem.h
  storage/connect/reldef.h
  storage/connect/tabdos.h
  storage/connect/tabmysql.cpp
  storage/connect/tabmysql.h
  storage/connect/tabodbc.cpp
  storage/connect/tabodbc.h
  storage/connect/xindex.cpp
  storage/connect/xtable.h

- Return error in "info" on Cardinality error.
modified:
  storage/connect/ha_connect.cc

- Backport the fix for MySQL Bug#13947868
- Add our testcase (they don't publish theirs)

back-ported the patch for bug #13256831 from mysql-5.6 code line.

  Here's the comment this patch was provided with:

  Fixed bug#13256831 - ERROR 1032 (HY000): CAN'T FIND RECORD.

  This bug only occurs if a user tries to update a base table using
  an updatable view and this view was created as a join for which
  the clause 'WITH CHECK OPTION' was specified.

  The reason for the bug was that when such an update was
  executed, row positions were not properly handled for tables
  that were not updated but had constraints that had to be
  checked due to the 'WITH CHECK OPTION' clause.

  The reason for the bug was that when such update is executed
  then for tables specified in the view definition and
  also listed in the 'WITH CHECK OPTION' clause the positioning to
  row being updated is not performed.

Removed unused result files.

  catalog data path had not been set. This was added into ha_connect::info.
modified:
  storage/connect/ha_connect.cc

- All the functions querying table options could return information from the wrong
  table when several CONNECT tables were used in the same query (for instance joined
  together) This was because they belonged to the catalog class that is shared between
  all tables in the same query. They have been moved from the catalog class to the
  TABDEF/RELDEF class that is attached to each table. This was a major potential bug.
modified:
  storage/connect/catalog.h
  storage/connect/filamvct.cpp
  storage/connect/filamzip.cpp
  storage/connect/mycat.cc
  storage/connect/mycat.h
  storage/connect/reldef.cpp
  storage/connect/reldef.h
  storage/connect/tabdos.cpp
  storage/connect/tabfmt.cpp
  storage/connect/tabmul.cpp
  storage/connect/tabmysql.cpp
  storage/connect/taboccur.cpp
  storage/connect/tabodbc.cpp
  storage/connect/tabpivot.cpp
  storage/connect/tabsys.cpp
  storage/connect/tabtbl.cpp
  storage/connect/tabutil.cpp
  storage/connect/tabvct.cpp
  storage/connect/tabwmi.cpp
  storage/connect/tabxcl.cpp
  storage/connect/tabxml.cpp
  storage/connect/xindex.cpp

- Prepare indexing of MYSQL/ODBC tables (as does FEDERATED) (Not implemented yet)
modified:
  storage/connect/ha_connect.cc
  storage/connect/ha_connect.h
  storage/connect/mycat.cc
  storage/connect/mycat.h

- Typo
modified:
  storage/connect/plgdbutl.cpp

Add a testcase and backport this fix:

Bug#14338686: MYSQL IS GENERATING DIFFERENT AND SLOWER
              (IN NEWER VERSIONS) EXECUTION PLAN
PROBLEM:
While checking for an index to sort for the order by clause
in this query
"SELECT datestamp FROM contractStatusHistory WHERE
contract_id = contracts.id ORDER BY datestamp asc limit 1;"

we do not calculate the number of rows to be examined correctly.
As a result we choose index 'idx_contractStatusHistory_datestamp'
defined on the 'datestamp' field, rather than choosing index
'contract_id'. And hence the lower performance.

ANALYSIS:
While checking if an index is present to give the records in
sorted order(datestamp), we consider the selectivity of the
'ref_key'(contract_id here) using 'table->quick_condition_rows'.
'ref_key' here can be an index from 'REF_ACCESS' or from 'RANGE'.

As this is a 'REF_ACCESS', 'table->quick_condition_rows' is not
set to the actual value which is 2. Instead is set to the number
of tuples present in the table indicating that every row that
is selected would be satisfying the condition present in the query.

Hence, the selectivity becomes 1 even when we choose the index
on the order by column instead of the join_condition.

But, in reality as only 2 rows satisy the condition, we need to
examine half of the entire data set to get one tuple when we
choose index on the order by column.
Had we chosen the 'REF_ACCESS' we would have examined only 2 tuples.
Hence the delay in executing the query specified.
  
FIX:
While calculating the selectivity of the ref_key:
For REF_ACCESS consider quick_rows[ref_key] if range 
optimizer has an estimate for this key. Else consider 
'rec_per_key' statistic.
For RANGE ACCESS consider 'table->quick_condition_rows'.

modified:
  storage/connect/ha_connect.cc
  storage/connect/tabpivot.cpp
  storage/connect/tabpivot.h

modified:
  storage/connect/ha_connect.cc
  storage/connect/ha_connect.h
  storage/connect/xindex.cpp

- Optimize retrieving numeric values in scan_record. Was previously
  translating numeric values to character representation back and forth.
modified:
  storage/connect/ha_connect.cc
  storage/connect/mysql-test/connect/r/xml.result

- Modify Pivot table creation to avoid reading the entire source table
  when making columns from Discovery. MDEV-6024
modified:
  storage/connect/tabpivot.cpp

- Make JOIN::const_key_parts include keyparts for which 
  the WHERE clause has an equality in form 
  "t.key_part=reference_outside_this_select"
- This allows to avoid filesort'ing in some cases (and also 
  avoid a difficult choice between using filesort or using an index)

10.0 variation of the problem was that system tables were altered
during mysql_upgrade process using old (smaller) column lengths. 
At the end the tables were altered again, so the structure was restored,
but if there were long values before the upgrade, they were truncated.
Fixed by using correct column length in alter statements.

MDEV-5401: Wrong result (missing row) on a 2nd execution of PS with exists_to_in=on, MERGE view or a SELECT SQ

The problem was that the view substitute its fields (on prepare) with reverting the change after execution. After prepare on optimization exists2in convertion substituted arguments of '=' with constsnt '1', but then one of the arguments of '=' was reverted to the view field reference.This lead to incorrect WHERE condition on the second execution.

To fix the problem we replace whole '=' with '1' permannently.

We need to use mysql_cond_broadcast() rather than _signal for
COND_thread_count, as there can be multiple waiters.

Thanks to Pavel Ivanov for reporting both the problem and the
solution.

The code did not correctly handle the update of position for Rotate events in the
binlog/relaylog when using parallel replication.

  normally when too big to be suballocated) to handle big results.
modified:
  storage/connect/valblk.cpp
  storage/connect/valblk.h

- Add system variable connect_work_size giving the size of the CONNECT
  work area used for memory allocation.
modified:
  storage/connect/ha_connect.cc
  storage/connect/plugutil.c
  storage/connect/user_connect.cc

  Exhausted memory cause un-prepared long jump
  Issue proper message when PIVOT column is nullable
modified:
  storage/connect/mysql-test/connect/r/pivot.result
  storage/connect/mysql-test/connect/t/pivot.test
  storage/connect/plgdbsem.h
  storage/connect/tabpivot.cpp

- Prepare adding index_prev (not used yet)
modified:
  storage/connect/plgdbsem.h
  storage/connect/xindex.cpp
  storage/connect/xindex.h

MDEV-5984: EITS: Incorrect filtered% value for single-table select with range access
- Fix calculate_cond_selectivity_for_table() to work correctly with range accesses 
  over multi-component keys:
  = First, take selectivity of all possible range scans into account. Remember which 
    fields were used bt the range scans.
  = Then, calculate selectivity produced by sargable predicates on fields. If a 
    field was used in a possible range access, assume its selectivity is already
    taken into account.
- Fix table_cond_selectivity(): when quick select is used, selectivity of
  COND(table) is taken into account in matching_candidates_in_table(). In
  table_cond_selectivity() we should not apply it for the second time.

  By implementing index_last
modified:
  storage/connect/ha_connect.cc
  storage/connect/ha_connect.h
  storage/connect/xindex.cpp

- Adding the TYPE_BIN Connect internal type
  (not tested and not used yet)
modified:
  storage/connect/global.h
  storage/connect/value.cpp
  storage/connect/value.h

modified:
  storage/connect/osutil.c
  storage/connect/plugutil.c
  
- Fix using fmt uninitialized in Tabcolumns
modified:
  storage/connect/tabutil.cpp

- Suppress gcc warning
modified:
  storage/connect/ha_connect.cc

  conversion from TEXT to VARCHAR  in PROXY and MYSQL tables.
modified:
  storage/connect/ha_connect.cc
  storage/connect/myconn.cpp
  storage/connect/myconn.h
  storage/connect/myutil.cpp
  storage/connect/tabmysql.cpp
  storage/connect/tabutil.cpp

- Add the xmap system variable addressing whether file mapping should be used
  to handle indexing.
modified:
  storage/connect/CMakeLists.txt
  storage/connect/ha_connect.cc
  storage/connect/xindex.cpp
  storage/connect/xindex.h

- Do take care of ~ in Linux version of _fullpath (not tested yet)
modified:
  storage/connect/osutil.c

asserts can be conditionally compiled out.

see MDEV-5981

another post-fix patch for MDEV-5850: MySQL Bug#21317: SHOW CREATE DATABASE does not obey to lower_case_table_names
(for case-insensitive filesystems)

sql/events.cc:
  for "SHOW EVENTS IN db_name"
sql/sp_head.h:
  for "CREATE EVENT", and everything SP-related
sql/sql_acl.cc:
  privilege check for mysql_change_db()
sql/sql_db.cc:
  for metadata locking of db names
sql/sql_parse.cc:
  any_db is a constant, it is not writable
sql/sql_show.cc:
  for SHOW CREATE TRIGGER and other trigger-related statements

MDEV-5971 Asymmetry between CAST(DATE'2001-00-00') to INT and TO CHAR in prepared statements

Consistently set maybe_null flag, even not-NULL temporal literal may become NULL
in the restrictive sql_mode.

fix uninit variable