returns incorrect results with where

An outer join of a const table (outer) and a normal table
(inner) with GROUP BY on a field from the outer table would
optimize away GROUP BY, and thus trigger the optimization to
do away with a temporary table if grouping was performed on
columns from the const table, hence executing the query with
filesort without temporary table. But this should not be
done if there is a non-indexed access to the inner table,
since filesort does not handle joins. It expects either ref
access, range ditto or table scan. The join condition will
thus not be applied.

Fixed by always forcing execution with temporary table in
the case of ROLLUP with a query involving an outer join. This
is a slightly broader class of queries than need fixing, but
it is hard to ascertain the position of a ROLLUP field wrt
outer join with current query representation.

Problem: inserting a record we don't set unused null bits in the
record buffer if no default field values used.
That may lead to wrong live checksum calculation.

Fix: set unused null bits in the record buffer in such cases.

The bug is caused by a race condition between the 
INSERT DELAYED thread and the client thread's FLUSH TABLE.  The 
FLUSH TABLE does not guarantee (as is (wrongly) suggested in the 
test case) that the INSERT DELAYED is ever executed.  The 
execution of the test case will thus not be deterministic.

The fix has been to do a deterministic verification that both
threads are complete by checking the content of the table.

This test case tests a circular replication of four hosts. 
A--->B--->C--->D--->A
The replicate is slow and needs more time to replicate all data in the circle.
The time it spends to replicate, sometimes, is longer than the time that 
wait_condition.inc spends to wait that all data has been replicated. This
cause sporadical failure of this test case.
  
This patch uses sync_slave_with_master to ensure that all data can be replicated
successfully in the circle.

Only relative log events are showed.

 int join_read_key(JOIN_TAB*)

The eq_ref access method TABLE_REF (accessed through 
JOIN_TAB) to save state and to track if this is the 
first row it finds or not.
This state was not reset on subquery re-execution
causing an assert.

Fixed by resetting the state before the subquery 
re-execution.

 int join_read_key(JOIN_TAB*)

The eq_ref access method TABLE_REF (accessed through 
JOIN_TAB) to save state and to track if this is the 
first row it finds or not.
This state was not reset on subquery re-execution
causing an assert.

Fixed by resetting the state before the subquery 
re-execution.

Problem: add_collation did not check that cs->number is smaller
than the number of elements in the array all_charsets[],
so server could crash when loading an Index.xml file with
a collation ID greater the number of elements 
(for example when downgrading from 5.5).

Fix: adding a condition to check that cs->number is not out of valid range.

check_key_in_view() had one code branch which returned with "return TRUE"
rather than "DBUG_RETURN(TRUE)". Only affected debug builds.

No test case added.

Problem is that purge_logs implementation in ndb (ndbcluster_binlog_index_purge_file)
calls mysql_parse (with (thd->options & OPTION_BIN_LOG) === 0)) 
but MYSQL_BIN_LOG first takes LOCK_log and then checks thd->options

Solution in this patch, changes so that rotate_and_purge does not hold
LOCK_log when calling purge_logs_before_date. I think this is safe
as other "purge"-function(s) is called wo/ holding LOCK_log, e.g purge_master_logs

'LOAD DATA CONCURRENT [LOCAL] INFILE ...' statment only is binlogged as
'LOAD DATA [LOCAL] INFILE ...' in SBR and MBR.  As a result, if replication is on, 
queries on slaves will be blocked by the replication SQL thread.

This patch write code to write 'CONCURRENT' into the log event if 'CONCURRENT' option
is in the original statement in SBR and MBR. 

All tests in the parts suite that use partitioning
on a timezone-dependent expression were commented
out, since it is not valid anymore.

Includes both patch from bug#48737 (without test,
which should go to next-mr) and test for
bug#49028.

When applying innodb snapshot 1.0.6 the storage engine name for innodb plugin
under windows was changed from INNODB_PLUGIN to INNOBASE.

This is a wrong and changing back the name to INNODB_PLUGIN.

5.0 buffer overflow for ER_UPDATE_INFO, or truncated info message in 5.1
      
5.0.86 has a buffer overflow/crash, and 5.1.40 has a truncated message.
      
errmsg.txt contains this:
      
ER_UPDATE_INFO
rum "Linii identificate (matched): %ld  Schimbate: %ld  Atentionari 
(warnings): %ld"
When that is sprintf'd into a buffer of STRING_BUFFER_USUAL_SIZE size,
a buffer overflow can happen.
      
The solution to this is to use MYSQL_ERRMSG_SIZE for the buffer size, 
instead of STRING_BUFFER_USUAL_SIZE. This will allow longer strings. 
To avoid potential crashes, we will also use my_snprintf instead of
sprintf.

            timestamp primary key 
 
Since TIMESTAMP values are adjusted by the current time zone  
settings in both numeric and string contexts, using any 
expressions involving TIMESTAMP values as a  
(sub)partitioning function leads to undeterministic behavior of  
partitioned tables. The effect may vary depending on a storage  
engine, it can be either incorrect data being retrieved or  
stored, or an assertion failure. The root cause of this is the  
fact that the calculated partition ID may differ from a  
previously calculated ID for the same data due to timezone  
adjustments of the partitioning expression value. 
 
Fixed by disabling any expressions involving TIMESTAMP values  
to be used in partitioning functions with the follwing two 
exceptions: 
 
1. Creating or altering into a partitioned table that violates 
the above rule is not allowed, but opening existing such tables 
results in a warning rather than an error so that such tables 
could be fixed. 
 
2. UNIX_TIMESTAMP() is the only way to get a 
timezone-independent value from a TIMESTAMP column, because it 
returns the internal representation (a time_t value) of a 
TIMESTAMP argument verbatim. So UNIX_TIMESTAMP(timestamp_column)
is allowed and should be used to fix existing tables if one 
wants to use TIMESTAMP columns with partitioning.

      
As documented in the bug report, the double checked locking
pattern has inherent issues, and cannot guarantee correct
initialization.

This patch replaces the logic in init_available_charsets()
with the use of pthread_once(3). A wrapper function,
my_pthread_once(), is introduced and is used in lieu of direct
calls to init_available_charsets(). Related defines
MY_PTHREAD_ONCE_* are also introduced.

For the Windows platform, the implementation in lp:sysbench is
ported. For single-thread use, a simple define calls the
function and sets the pthread_once control variable.

Charset initialization is modified to use my_pthread_once().

compatibility, not to change the -D_WIN32_WINNT=0x0501 in 5.1, XP
compatibility.

Windows 2000.
      
      Visual Studio 2003 and 2005 require
        _WIN32_WINNT >= 0x0500 (Win2000)  for TryEnterCriticalSection.

The fix inserts newline and comma characters as appropriate
into the constraint reporting code to match the formatting
required by SHOW CREATE TABLE. Additionally, a erroneously
duplicated copy of check_if_incompatible_data() was removed
from db2i_constraints.cc since the correct version is already
in ha_ibmdb2i.cc.

This fix changes the character set used within the
IBMDB2I handler to hash table names to information
about open tables. Previously, tables with names
that differed only in letter case would hash to the
same data structure. This caused incorrect behavior
or errors when two such tables were in use simultaneously.

      
The help text for --init-slave=name:
"Command(s) that are executed when a slave connects to this master".
This text indicate that the --init-slave option is set on a  master 
server, and the master server passes the option's argument to slave 
which connects to it. This is wrong. Actually the --init-slave option 
just can be set on a slave server, and then the slave server executes 
the argument each time the SQL thread starts.

Correct the help text for --init-slave option as following:
"Command(s) that are executed by a slave server each time the SQL thread starts."