The problem is that Item_direct_view_ref which is inherited
from Item_ident updates orig_table_name and table_name with
the same values. The fix is introduction of new constructor
into Item_ident and up which updates orig_table_name and
table_name separately.


mysql-test/r/metadata.result:
  test case
mysql-test/t/metadata.test:
  test case
sql/item.cc:
  new constructor which updates
  orig_table_name and table_name
  separately.
sql/item.h:
  new constructor which updates
  orig_table_name and table_name
  separately.
sql/table.cc:
  used new constructor

      
Applied a path from Jim Winstead : Added a GPL notice.
Added the missing '(c)' and 'v2'. 

join view in sql_safe_updates mode. 

This bug was unexpectedly fixed along with bug 
number 49534. This patch contains only the test
case.

BUG#51342 - more xid crashing

Restore autocommit variable by supplying explicit value.

mysql-test/r/xa.result:
  Restore autocommit variable by supplying explicit value.
mysql-test/t/xa.test:
  Restore autocommit variable by supplying explicit value.

SET autocommit=1 while XA transaction is active may
cause various side effects, including memory corruption
and server crash.

The problem is that SET autocommit=1 and further queries
attempt to commit local transaction, whereas XA transaction
is still active.

As local and XA transactions are mutually exclusive, this
patch forbids enabling autocommit mode while XA transaction
is active.

mysql-test/r/xa.result:
  A test case for BUG#51342.
mysql-test/t/xa.test:
  A test case for BUG#51342.
sql/set_var.cc:
  Forbid enabling autocommit mode while XA transaction is
  active.

MySQL uses two source layouts when building : the bzr 
layout and the source package layout.
The previous fix for bug 35250 contained 1 change that is
valid for both modes and a number of changes that are valid
only for the bzr source layout.
The important thing was to fix the source package layout.
And for this the change in configure.in was sufficient.
It's not trivial (and not requested by this bug) to support 
VPATH builds from the bzr trees.
This is why the other changes are reverted and the change to
fix the VPATH build for source distributions is left intact.

The test case added in previous patch missed a RESET MASTER on
test start up. Without it, showing binary log contents can
sometimes show spurious entries from previously executed tests,
ultimately causing test failure - result mismatch.

The test file was added in:
revid:luis.soares@sun.com-20100224190153-k0bpdx9abe88uoo2

This patch also moves the test case into binlog_innodb_row.test
file. This way we avoid having yet another test file,
binlog_row_innodb_truncate.test, whose only purpose is to host
one test case. This had been actually suggested during original
patch review, but somehow the binlog_innodb_row was missed when
searching for a file to host the test case.

mysql_upgrade was passing an non-initialized non-null tmpdir to create_temp_file() if no 
--tmpdir was specified. This prevents create_temp_file() from taking the system 
temporary file path and as a result mysql_upgrade was trying to open a file in a 
directory that it may not have write access to.
Fixed by making sure mysql_upgrade will pass a zero length temp dir string to 
create_temp_file() if no --tmpdir is specified.

output from HANDLER ... READ .. NEXT ...

The problem was that mysqltest could attempt to execute a
SHOW WARNINGS statement through a connection that was not
properly reaped, thus violating its own rules.

The solution is to skip SHOW WARNINGS if a connection has
not been properly repeaed.

client/mysqltest.cc:
  Skip SHOW WARNINGS if connection hasn't been reaped.

The problem is that not all column names retrieved from a SELECT
statement can be used as view column names due to length and format
restrictions. The server failed to properly check the conformity
of those automatically generated column names before storing the
final view definition on disk.

Since columns retrieved from a SELECT statement can be anything
ranging from functions to constants values of any format and length,
the solution is to rewrite to a pre-defined format any names that
are not acceptable as a view column name.

The name is rewritten to "Name_exp_%u" where %u translates to the
position of the column. To avoid this conversion scheme, define
explict names for the view columns via the column_list clause.
Also, aliases are now only generated for top level statements.

mysql-test/include/view_alias.inc:
  Add test case for Bug#40277
mysql-test/r/compare.result:
  Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/group_by.result:
  Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/ps.result:
  Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/subselect.result:
  Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/subselect3.result:
  Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/type_datetime.result:
  Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/union.result:
  Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/view.result:
  Add test case result for Bug#40277
mysql-test/r/view_alias.result:
  Add test case result for Bug#40277
mysql-test/t/view_alias.test:
  Add test case for Bug#40277
sql/sql_view.cc:
  Check if auto generated column names are conforming. Also, the
  make_unique_view_field_name function is not used as it uses the
  original name to construct a new one, which does not work if the
  name is invalid.

The problem was that bits of the destructive equality propagation
optimization weren't being undone after the execution of a stored
program. Modifications to the parse tree that are based on transient
properties must be undone to enable the re-execution of stored
programs.

The solution is to cleanup any references to predicates generated
by the equality propagation during the execution of a stored program.

mysql-test/r/trigger.result:
  Add test case result for Bug#51650.
mysql-test/t/trigger.test:
  Add test case for Bug#51650.
sql/item.cc:
  Remove reference to a equality predicate.

Spatial indexes were not checking for out-of-record condition in
the handler next command when the previous command didn't found
rows.

Fixed by making the rtree index to check for end of rows condition
before re-using the key from the previous search.

Fixed another crash if the tree has changed since the last search.
Added a test case for the other error.

Spatial indexes were not checking for out-of-record condition in
the handler next command when the previous command didn't found
rows.

Fixed by making the rtree index to check for end of rows condition
before re-using the key from the previous search.

Fixed another crash if the tree has changed since the last search.
Added a test case for the other error.

            consider clustered primary keys

Choosing a shortest index for the covering index scan,
the optimizer ignored the fact, that the clustered primary
key read involves whole table data.

The find_shortest_key function has been modified to
take into account that fact that a clustered PK has a
longest key of possible covering indices.


mysql-test/r/innodb_mysql.result:
  Test case for bug #39653.
mysql-test/t/innodb_mysql.test:
  Test case for bug #39653.
sql/sql_select.cc:
  Bug #39653: find_shortest_key in sql_select.cc does not
              consider clustered primary keys
  
  The find_shortest_key function has been modified to
  take into account that fact that a clustered PK has a
  longest key of possible covering indices.

 for ORDER BY on a TEXT or VARCHAR field" backported to 5.1.

This is *no* change in contents, the differences are formatting only
and an address update of the FSF. It continues to be Version 2, June 1991.

           + failing statements

Implicit DROP event for temporary table is not getting
LOG_EVENT_THREAD_SPECIFIC_F flag, because, in the previous
executed statement in the same thread, which might even be a
failed statement, the thread_specific_used flag is set to
FALSE (in mysql_reset_thd_for_next_command) and not set to TRUE
before connection is shutdown. This means that implicit DROP
event will take the FALSE value from thread_specific_used and
will not set LOG_EVENT_THREAD_SPECIFIC_F in the event header. As
a consequence, mysqlbinlog will not print the pseudo_thread_id
from the DROP event, because one of the requirements for the
printout is that this flag is set to TRUE.

We fix this by setting thread_specific_used whenever we are
binlogging a DROP in close_temporary_tables, and resetting it to
its previous value afterward.

            work in 5.1.40)

MERGE engine fails to open child table from a different
database if child table/database name contains characters
that are subject for table name to filename encoding
(WL1324).

Another problem is that MERGE engine didn't properly open
child table from the same database if child table name
contains characters like '/', '#'.

The problem was that table name to file name encoding was
applied inconsistently:
* On CREATE: encode table name + database name if child
  table is in different database; do not encode table
  name if child table is in the same database;
* No decoding on open.

With this fix child table/database names are always
encoded on CREATE and decoded on open. Compatibility
with older tables preserved.

Along with this patch comes fix for SHOW CREATE TABLE,
which used to show child table/database path instead
of child table/database names.

mysql-test/r/merge.result:
  A test case for BUG#48265.
mysql-test/std_data/bug48265.frm:
  MERGE table from 5.0 to test fix for BUG#48265 compatibility.
mysql-test/t/merge.test:
  A test case for BUG#48265.
storage/myisammrg/ha_myisammrg.cc:
  On CREATE always write child table/database name encoded
  by table name to filename encoding to dot-MRG file.
  
  On open decode child table/database name.
  Compatibilty with previous versions preserved.
  
  Fixed ::append_create_info() to return child
  table/database name instead of path.
storage/myisammrg/myrg_open.c:
  Move if (has_path) branch from myrg_parent_open() to
  myisammrg_parent_open_callback. The callback function
  needs to know if child table was written along with
  database name to dot-MRG file. Needed for compatibility
  reasons.