table corruption


Moved the testcase from the file myisam.test to the new testfile 
mysiam_debug.test
 

mysql-test/r/myisam.result:
  Removed result file for BUG#40827
mysql-test/r/myisam_debug.result:
  Result file for BUG#40827
mysql-test/t/myisam.test:
  Removed testcase for BUG#40827
mysql-test/t/myisam_debug.test:
  TestCase for BUG#40827

                       
Killing the insert-select statement corrupts the MyISAM table only
when the destination table is empty and when it has indexes. When 
we bulk insert huge data and if the destination table is empty we 
disable the indexes for fast inserts, data is then inserted and 
indexes are re-enabled after bulk_insert operation
                        
Killing the query, aborts the repair table operation during enable
indexes phase leading to table corruption.
                      
We now truncate the table when we detect that enable indexes is
killed for bulk insert query.As we have an empty table before the 
operation, we can fix by truncating the table.

mysql-test/r/myisam.result:
  Result file for BUG#40827
mysql-test/t/myisam.test:
  Testcase for BUG#40827
storage/myisam/ha_myisam.cc:
  Fixed end_bulk_insert() method to truncate the table when we detect enable 
  index operation is killed.

      
A bug in the initialization of key segment information made it point
to the wrong bit, since a bit index was used when its int value
was needed. This lead to misinterpretation of bit columns
read from MyISAM record format when a NULL bit pushed them over
a byte boundary.
Fixed by using the int value of the bit instead.


mysql-test/r/myisam.result:
  Bug#43737: Test result.
mysql-test/t/myisam.test:
  Bug#43737: Test case.
storage/myisam/mi_open.c:
  Bug#43737: fix.

key_buffer_size.

The cause of corruption was number overflow when multiplying 
two ulong values, number of used keycache blocks with size
of a single block. The result of multiplication exceeded ulong 
range (4G) and this lead to incorrectly calculated  buffer offset
in the key cache.

The fix is to use size_t for multiplication result.

This patch also fixes pointless cast in safemalloc 
(size of allocated block to uint), that creates lot of false
alarm warnings when using big keycache (> 4GB) in debug mode.

The storage engine was not correctly handling the case in 
which rnd_pos is executed for a handler without a preceding
rnd_next or index read operation. As a result, an unitialized
file handle was sometimes being passed to the QMY_READ API.

The fix clears the rrnAssocHandle at the beginning of each
read operation and then checks to see whether it has been
set to a valid handle value before attempting to use it
in rnd_pos. If rrnAssocHandle has not been set by a previous
read operation, rnd_pos instead falls back to the use of the
currently active handle.

storage/ibmdb2i/ha_ibmdb2i.cc:
  Bug#44337 Select query using index merge fails with MCH3601
  
  - clear the rrnAssocHandle at the beginning of each
    read operation 
  - checks to see whether it has been set to a valid
    handle value before attempting to use it in rnd_pos

no conflicts

no conflicts

      Several 5.0 tests do not pass MTR's --check option (moved from Bug 42308)

                  (moved from Bug 42308)

Details:
- insert_update
  Add DROP TABLE which was missing, error numbers -> names
- varbinary
  Add DROP TABLE which was missing
- sp_trans_log
  Add missing DROP function, improved formatting

      
Fixed a number of typos, and made punctuation and
capitalization more consistent in documentation
and help.

   the Point() and Linestring() functions create WKB representation of an
   object instead of an real geometry object.
   That produced bugs when these were inserted into tables.

   GIS tests fixed accordingly.
            
per-file messages:
  mysql-test/r/gis-rtree.result
Bug#38990 Arbitrary data input plus GIS functions causes mysql server crash 
    test result
  mysql-test/r/gis.result
Bug#38990 Arbitrary data input plus GIS functions causes mysql server crash 
    test result
  mysql-test/t/gis-rtree.test
Bug#38990 Arbitrary data input plus GIS functions causes mysql server crash 
    test fixed - GeomFromWKB invocations removed
  mysql-test/t/gis.test
Bug#38990 Arbitrary data input plus GIS functions causes mysql server crash 
    test fixed - AsWKB invocations added
  sql/item_geofunc.cc
Bug#38990 Arbitrary data input plus GIS functions causes mysql server crash 
     Point() and similar functions to create a proper object

Bug #40925: Equality propagation takes non indexed attribute

Query execution plans and execution time of queries like

  select a, b, c from t1
    where a > '2008-11-21' and b = a limit 10

depended on the order of equality operator parameters:
"b = a" and "a = b" are not same. 


An equality propagation algorithm has been fixed:
the substitute_for_best_equal_field function should not
substitute a field for an equal field if both fields belong
to the same table.


mysql-test/r/select.result:
  Added test case for bug #40925.
mysql-test/t/select.test:
  Added test case for bug #40925.
sql/item.cc:
  Bug #40925: Equality propagation takes non indexed attribute
  
  An equality propagation algorithm has been fixed:
  the substitute_for_best_equal_field function should not 
  substitute a field for an equal field if both fields belong
  to the same table.

The fix is to disable result log as we need to
test valgrind error only.

Respectively, replaced "--exec diff" by "--diff_files" which is a mysqltest command to run a
non-operating system specific diff. Removed the file rpl_000015-slave.sh as it is not
necessary in the new MTR.

Turned off autocommit at the start of this test per Innobase recommendation.
Noted significant reduction in run time for this test w/ a minor increase in other tests' run-times.

is pushed along with BUG#43309.

Forgot to add BUG#4229 in the first paragraph in the commit 
message

1) BUG#43309 - Test main.innodb can't be run twice

Detailed revision comments:

r4701 | vasil | 2009-04-13 17:03:46 +0300 (Mon, 13 Apr 2009) | 6 lines
branches/5.0:

Fix Bug#43309 Test main.innodb can't be run twice

by making the innodb.test reentrant.

1) BUG#42279 - Race condition in btr_search_drop_page_hash_when_freed()

Detailed revision comments:

r4031 | marko | 2009-01-23 15:33:46 +0200 (Fri, 23 Jan 2009) | 8 lines
branches/5.0: btr_search_drop_page_hash_when_freed(): Check if
buf_page_get_gen() returns NULL.  The page may have been evicted
from the buffer pool between buf_page_peek_if_search_hashed() and
buf_page_get_gen(), because the buffer pool mutex will be released
between these two calls. (Bug #42279)

rb://82 approved by Heikki Tuuri

NULL merge fix for BUG#43660 into 5.1 as the fix for this bug
is already applied in 5.1

                   for indexes of InnoDB table

Fixes by replacing the PRNG that is used to pick random pages with a 
better one. 

Also adds a configuration option "innodb_use_legacy_cardinality_algorithm"
to enable the fix only when the option is set.

This patch is from http://bugs.mysql.com/file.php?id=11789

Entry for build-vs9.bat and build-vs9_x64.bat was missing in
win/Makefile.am. Added the entries to fix the problem.

win/Makefile.am:
  Added entry for build-vs9.bat and build-vs9_x64.bat in EXTRA_DIST.

          specifc command

Replaced "--exec rm" by "remove_file" which is a mysqltest command to
erase a file.

QUERY statement
      
Commit 55629 applied to 5.0-bugteam and 5.1-bugteam: 
Check for thd->killed in CHECKSUM loop.

init 'wc' variable


mysql-test/r/func_set.result:
  test result
mysql-test/t/func_set.test:
  test case
sql/item_func.cc:
  init 'wc' variable

replaced String->c_ptr() with String->c_ptr_safe()


mysql-test/r/func_encrypt.result:
  test result
mysql-test/t/func_encrypt.test:
  test case
sql/item_strfunc.cc:
  replaced String->c_ptr() with String->c_ptr_safe()

The warning happens because string argument is not zero ended.
The fix is to add new parameter 'length' to SQL_CRYPT() and
use ptr() instead of c_ptr().


mysql-test/r/func_str.result:
  test result
mysql-test/t/func_str.test:
  test case
sql/item_strfunc.cc:
  Added new parameter 'length' to SQL_CRYPT
sql/sql_crypt.cc:
  Added new parameter 'length' to SQL_CRYPT
sql/sql_crypt.h:
  Added new parameter 'length' to SQL_CRYPT