MDEV-4473: mysql_binlog_send() starts sending events from wrong GTID position in some master failover scenarios

Suppose binlog file X has in its Gtid_list_event: 0-1-3,0-2-5, and suppose the
slave requests to start replicating after 0-1-3.

In this case the bug was that master would start sending events from the start
of X. This is wrong, because 0-2-4 and 0-2-5 are contained in X-1, and are
needed by the slave. So these events were lost.

On the other hand, if the slave requested 0-2-5, then it _is_ correct to start
sending from the beginning of binlog file X, because 0-2-5 is the last GTID
logged in earlier binlogs. The difference is that 0-2-5 is the last of the
GTIDs in the Gtid_list_event. The problem was that the code did not check that
the matched GTID was the last one in the list.

Fixed by checking if the gtid requested by slave that matches a gtid in the
Gtid_list_event is the last event for that domain in the list. If not, go back
to a prior binlog to ensure all needed events are sent to slave.

mysql-test/include/show_events.inc:
  Backport --let $binlog_file=LAST, used by MDEV-4473 test case.

This makes it clear that the error code has nothing to do with errno.


mysql-test/include/mtr_warnings.sql:
  Fixed suppression for new slave error messages
mysql-test/lib/My/Test.pm:
  Use 'send' instead of 'print' to avoid errors about "wrong class ... back attempt"
mysql-test/lib/v1/mtr_report.pl:
  Fixed suppression for new slave error messages
mysql-test/mysql-test-run.pl:
  Fixed suppression for new slave error messages
  Removed warning from perl 5.16.2 about arrays
mysql-test/r/flush_read_lock.result:
  Fixed suppression for new slave error messages
sql/rpl_reporting.cc:
  Instead of writing "Errcode" to the log for Slave errors, use "Internal MariaDB error code"

- Calls to cleanup_load_tmpdir() could delete temporary files for another master connection
- Concurrent LOAD DATA commands from two master connections could use the same file name

Other bug fixes:
- Enlarge buffer for connection names with 'special characters' one can't store in filenames

Optimization:
- Don't do 'lower case' of connection names. We can use cmp_connection_name, where we already have the connection name in lower case.


mysql-test/suite/multi_source/load_data.result:
  Test case for MDEV-4352
mysql-test/suite/multi_source/load_data.test:
  Test case for MDEV-4352
sql/log_event.cc:
  Fixed: MDEV-4352
  - Calls to cleanup_load_tmpdir() could delete temporary files for another master connection
  - Concurrent LOAD DATA commands from two master connections could use the same file name
  
  The fix was to add the connection name (if one exists) to all slave temporary files used by LOAD DATA
sql/rpl_mi.cc:
  Enlarge buffer for connection names with 'special characters' one can't store in filenames
  Use mi->cmp_connection_name for connection file names.
sql/rpl_rli.cc:
  Use mi->cmp_connection_name for connection file names.
sql/slave.cc:
  Removed not needed empty line
sql/sql_const.h:
  Added MAX_FILENAME_MBWIDTH to be able to calculate buffer length for connection_names stored in file names
sql/sql_repl.cc:
  Use mi->cmp_connection_name for connection file names.

When the slave connects, the master skips binlog event groups
until it reaches the position requested by the slave. To
identify event groups, it needs to detect COMMIT events. But
this detection did not correctly handle binlog checksums, so
could incorrectly skip extra groups due to not detecting the
end of an event group.

    set(CMAKE_REQUIRED_INCLUDES ${ODBC_INCLUDE_DIR})

was missing before the recently added CHECK_CXX_SOURCE_COMPILES()

modified:
  storage/connect/CMakeLists.txt

on the build machine. So put them into the deb packages optionally.
     
Additionally, fixing cassandra/CMakeLists.txt to work with thrift
installed in /opt/local and /opt. It was supposed to work, but did
not work actually. Only thrift installed in /usr or /usr/local worked.


renamed:
  debian/dist/Debian/mariadb-server-10.0.files => debian/dist/Debian/mariadb-server-10.0.files.in
  debian/dist/Ubuntu/mariadb-server-10.0.files => debian/dist/Ubuntu/mariadb-server-10.0.files.in
modified:
  .bzrignore
  CMakeLists.txt
  storage/cassandra/CMakeLists.txt
  storage/cassandra/cassandra_se.cc
  storage/cassandra/gen-cpp/Cassandra.h
  storage/cassandra/gen-cpp/cassandra_types.h
  storage/oqgraph/CMakeLists.txt
  debian/dist/Debian/mariadb-server-10.0.files.in
  debian/dist/Ubuntu/mariadb-server-10.0.files.in

Server shutdown timeout of 10 seconds in test cases is too little for heavily
loaded test servers.

Fix innodb_bug12902967 to not fail with wrong error log output if we have
warnings about too few AIO handles for InnoDB.

Fix typo which could lead to unnecessarily replacing GTID event with dummy
event.

packages (they were unintentionally removed while moving ha_connect.so
into a separate package).

modified:
  debian/dist/Debian/mariadb-server-10.0.files
  debian/dist/Ubuntu/mariadb-server-10.0.files

The slave dump thread running on the master only checked thd->killed whenever
it reached the end of a binlog file, not between events. This could
unnecessarily delay server shutdown.

This was found by code inspection while tracking down some occasional "forcing
close of thread..." errors in Buildbot. Hopefully this will fix the failures,
but the fix is correct in any case.

Also increase the wait during server shutdown, 2 seconds is a bit tight in
case of heavy I/O stall, and it seems better to delay shutdown a bit than
force-kill threads unnecessarily.

Also fix some races in test cases that restart the mysqld server. The .expect
file should be changed with --append_file, --remove_file + --write_file
creates a short window where mysqld can error out due to .expect file missing.

who has two different incompatible copies of zlib installed:
(in /usr and in /usr/local).
cmake errorneously chose *.h file from /usr/local/include,
while zlib.a/zlib.so from /usr/lib/. Compilation failed
because of a missing symbol gzopen64.

modified:
  @ cmake/zlib.cmake
  Removing the line (as suggested by Vlad) which made cmake choose
  the wrong library.
  Note: this line used to be a hack for old HP machines,
  it's not needed anymore.

modified:
  @ storage/cassandra/CMakeLists.txt
    Renaming the package "CassandraSE" to "cassandra-engine",
    as agreed during Lisbon meeting.

  @ storage/connect/CMakeLists.txt
    Removing an unused line

increase the version.

error: too many initializers for `tm'

modified:
  storage/connect/ha_connect.cc

(e.g. sol10-64 in build bot).

modified:
  storage/connect/CMakeLists.txt

(the format changed during Sergei's merge of the connect engine and discovery)

modified:
  storage/connect/mysql-test/connect/r/odbc_xls.result

added:
  debian/mariadb-connect-engine-10.0.files
modified:
  cmake/build_configurations/mysql_release.cmake
  debian/dist/Debian/control
  debian/dist/Debian/mariadb-server-10.0.files
  debian/dist/Ubuntu/control
  debian/dist/Ubuntu/mariadb-server-10.0.files
pending merges:
  Alexander Barkov 2013-04-20 Adding mariadb-connect-engine-10.0 deb packa...
    Alexander Barkov 2013-04-19 Removing the connect engine from mariadb...

added:
  debian/mariadb-connect-engine-10.0.files
modified:
  debian/dist/Debian/control
  debian/dist/Ubuntu/control

modified:
  @ mysql-test/r/mysqld--help.result
  @ mysql-test/t/mysqld--help.test
  Supressing information about "--connect" in "mysqld --help" output,
  as it depends on the build parameters.
  As a side effect information about --connect-timeout is now also suppressed :(

  @ storage/connect/CMakeLists.txt
  Removing gcc warning switches that do not exists in some older gcc versions.

  @ storage/connect/ha_connect.cc
  Adding a quick fix: cast from "const char *" to "char *".
  Olivier should do a better fix eventually.

Fixed a wrong result from mysqld--help.test.

This bug in the code of get_column_range_cardinality() could lead to
wrong estimates of number of records in ranges for non-nullable columns.  

odbc_sqlite3 failed. Fixed.

modified:
  storage/connect/ha_connect.cc
  storage/connect/mysql-test/connect/r/odbc_sqlite3.result
  storage/connect/mysql-test/connect/t/odbc_sqlite3.test

as it needs unixODBC and libxml2 as dependencies

modified:
  cmake/build_configurations/mysql_release.cmake
  debian/dist/Debian/mariadb-server-10.0.files
  debian/dist/Ubuntu/mariadb-server-10.0.files

Adaptation to new API, small simplifications and bug fixes

just like other String::append() methods do

field options from SELECT clause to CREATE