3321 Magnus Blåudd    2010-01-05
     BUG#44840 - ndbapi compiler warning - type qualifier ignored for function return type
      - Remove the "const"
      - NOTE! This is an ABI incompatible change for some C++ compilers, NdbApi applications
        using any of the four changed functions may need a recompile if it's using dynamic linking.

It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables in statement and mixed modes.

In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.

In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.

So, in this patch we introduce the option
    - "--binlog-direct-non-transactional-updates" that can be used to bypass
    the current behavior in order to write directly to binary log statements
    that change non-transactional tables.

Missing ha_rnd_end in copy_partitions, found due to a
DBUG_ASSERT in mysql-pe

  subselect_single_select_engine::exec()

When a subquery doesn't need to be evaluated because
it returns only aggregate functions and these aggregates
can be calculated from the metadata about the table it
was not updating all the relevant members of the JOIN 
structure to reflect that this is a constant query.
This caused problems to the enclosing subquery 
('<> SOME' in the test case above) trying to read some
data about the tables.

Fixed by setting const_tables to the number of tables 
when the SELECT is optimized away.

added check_length optimization for I_S_NAME comparison

PB2 run uncovered issue that needs further analysis.

           REORGANIZE PARTITION

There were several problems which lead to this this,
all related to bad error handling.

1) There was several bugs preventing the ddl-log to be used for
   cleaning up created files on error.

2) The error handling after the copy partition rows did not close
   and unlock the tables, resulting in deletion of partitions
   which were in use, which lead InnoDB to put the partition to
   drop in a background queue.

error in the query.

Fixes a leak after materializing a GROUP BY subquery to a 
temp table when the subquery has a blob column in the SELECT
list.
Fixed by correctly destructing temporary buffers after doing
the conversion.

'CREATE TABLE IF NOT EXISTS ... SELECT' statement were causing 'CREATE
TEMPORARY TABLE ...' to be written to the binary log in row-based 
mode (a.k.a. RBR), when there was a temporary table with the same name.
Because the 'CREATE TABLE ... SELECT' statement was executed as 
'INSERT ... SELECT' into the temporary table. Since in RBR mode no 
other statements related to temporary tables are written into binary log,
this sometimes broke replication.

This patch changes behavior of 'CREATE TABLE [IF NOT EXISTS] ... SELECT ...'.
it ignores existence of temporary table with the 
same name as table being created and is interpreted
as attempt to create/insert into base table. This makes behavior of
'CREATE TABLE [IF NOT EXISTS] ... SELECT' consistent with
how ordinary 'CREATE TABLE' and 'CREATE TABLE ... LIKE' behave.

The optimizer must not continue executing the current query
if e.g. the storage engine reports an error.
This is somewhat hard to implement with Item::val_xxx()
because they do not have means to return error code.
This is why we need to check the thread's error state after
a call to one of the Item::val_xxx() methods.

Fixed store_key_item::copy_inner() to return an error state 
if an error happened during the call to Item::save_in_field() 
because it calls Item::val_xxx().
Also added similar checks to related places.

Added not_embedded to the new dbug_sync test file.

BUG#49481: RBR: MyISAM and bit fields may cause slave to stop on delete: 
cant find record
      
BUG#49482: RBR: Replication may break on deletes when MyISAM tables + 
char field are used

When using MyISAM tables, despite the fact that the null bit is
set for some fields, their old value is still in the row. This
can cause the comparison of records to fail when the slave is
doing an index or range scan.

We fix this by avoiding memcmp for MyISAM tables when comparing
records. Additionally, when comparing field by field, we first
check if both fields are not null and if so, then we compare
them. If just one field is null we return failure immediately. If
both fields are null, we move on to the next field.

Small fix in the test case. Changed the UNLOCK tables 
to happen after each insert.

In certain rare cases when a process was interrupted
during a FLUSH PRIVILEGES operation the diagnostic
area would be set to an error state but the function
responsible for the operation would still signal
success. This would lead to a debug assertion error
later on when the server would attempt to reset the
DA before sending the error message.

This patch fixes the issue by assuring that
reload_acl_and_cache() always fails if an error
condition is raised.

The second issue was that a KILL could cause
a console error message which referred to a DA
state without first making sure that such a
state existed.

This patch fixes this issue in two different
palces by first checking DA state before
fetching the error message.

 

Problem: When RAND() is binlogged in statement mode, the seed is
binlogged too, so the replication slave generates the same
sequence of random numbers. This makes replication work in many
cases, but not in all cases: the order of rows is not guaranteed
for, e.g., UPDATE or INSERT...SELECT statements, so the row data
will be different if master and slave retrieve the rows in
different orders.
Fix: Mark RAND() as unsafe. It will generate a warning if
binlog_format=STATEMENT and switch to row-logging if
binlog_format=ROW.

Problem: copying issuer's (or subject's) name tags into an internal
buffer from incoming stream we didn't check the buffer overflow. 
That may lead to memory overrun, crash etc.

Fix: ensure we don't overrun the buffer.

Note: there's no simple test case (exploit needed).

Selecting of the CONCAT_WS(...<PS parameter>...) result into
a user variable may return wrong data.

Item_func_concat_ws::val_str contains a number of memory
allocation-saving optimization tricks. After the fix
for bug 46815 the control flow has been changed to a
branch that is commented as "This is quite uncommon!":
one of places where we are trying to concatenate
strings inplace. However, that "uncommon" place
didn't care about PS parameters, that have another
trick in Item_sp_variable::val_str(): they use the
intermediate Item_sp_variable::str_value field,
where they may store a reference to an external
argument's buffer.

The Item_func_concat_ws::val_str function has been
modified to take into account val_str functions
(such as Item_sp_variable::val_str) that return a
pointer to an internal Item member variable that
may reference to a buffer provided.

MySQL handles the join syntax "JOIN ... USING( field1,
... )" and natural joins by building the same parse tree as
a corresponding join with an "ON t1.field1 = t2.field1 ..."
expression would produce. This parse tree was not cleaned up
properly in the following scenario. If a thread tries to
lock some tables and finds that the tables were dropped and
re-created while waiting for the lock, it cleans up column
references in the statement by means a per-statement free
list. But if the statement was part of a stored procedure,
column references on the stored procedure's free list weren't
cleaned up and thus contained pointers to freed objects.

Fixed by adding a call to clean up the current prepared
statement's free list.

This includes "MYSQL_U_SCORE_VERSION" in "configure.in".

- "release" starts from 1
- "level" ("m2", "rc", ...) is included in the RPM version.

but don't take the "tree name" change.

- "release" starts from 1
- "level" ("m2", "rc", ...) is included in the RPM version.

32bit builds with the --enable-assembler flag (enabled by default)
fail with an error message: undefined reference to `strmov_overlapp'.

Since the fix for bug 48866 we use a home-grown strmov function
instead of the ctpcpy function, but the source file for this
function was missed in the Makefile.am.

The strings/Makefile.am file has been modified to include strmov.c
file into ASSEMBLER_x86 and ASSEMBLER_sparc32 sections.