Provide routines to convert selected types to string and also for
UUID and Address <-> string  encoding/decoding.

Start NEO/go code with protocol package that defines message that NEO
nodes exchange in between each other. The definition is based on
neo/lib/protocol.py and is kept in sync with that file.

This commit brings only messages definition. Messages serialization will
come in the follow-up patch.

We will need to use BE16 and BE32 in the next patch.

See nexedi/zodbtools@b1163449 for details.

Tomáš Peterka noticed that gotos in dump.go are not actually needed because
the same functionality could be achieved with defer in more clean and
structured way.

Do it.

This brings ~ 5% performance hit

	name        old time/op  new time/op  delta
	ZodbDump-4   148µs ± 1%   155µs ± 2%  +4.69%  (p=0.000 n=9+10)

because defer implementation is currently not great
(https://github.com/golang/go/issues/14939)

If we absolutely need those 5% back it could be worked around similar to
e.g. FileStorage.Load:

https://lab.nexedi.com/kirr/neo/blob/6faed528/go/zodb/storage/fs1/filestorage.go#L133
https://lab.nexedi.com/kirr/neo/blob/6faed528/go/zodb/storage/fs1/filestorage.go#L141

/suggested-by @katomaso

Before, it waited for upstream activity until all partitions are touched.
However, when upstream is idle the backup cluster could remain stuck forever
if it was interrupted whereas some cells were still late.

The 'min_tid < new_tid' assertion failed when jumping to the past.

Given that:
- read locks are only taken by transactions (not replication)
- in backup mode, storage nodes stay in UP_TO_DATE state, even if partitions
  are synchronized up to different tids

there was a race condition with the master node replying to LastTransaction
with a TID that may not be replicated yet by all replicas, potentially causing
such replicas to reply OidDoesNotExist or OidNotFound if a client asks it data
too early.

IOW, even if the cluster does contain the data up to `getBackupTid(max)`,
it is only readable by NEO clients up to `getBackupTid(min)` as long as the
cluster is in BACKINGUP state.

Usage of supportsTransactionalUndo() was removed from ZODB in 2007 - see
e.g. the following commits:

https://github.com/zopefoundation/ZODB/commit/a06bfc03
https://github.com/zopefoundation/ZODB/commit/e667b022
https://github.com/zopefoundation/ZODB/commit/f595f7e7
...

/reviewed-by @vpelletier
/reviewed-on !8

`zodb catobj` command to dump content of an object - similarly to `git
cat-file`. Two modes: raw and verbose with `zodb dump` like headers for
the object present.

There is no such command currently in zodbtools/py.

Command to print general information about a ZODB database.
Same as `zodb info` in zodbtools/py.

Add `zodb dump` command to dump arbitrary ZODB database in generic
format. The actual dump protocol being used here is the same as in
zodbtools/py with

	https://lab.nexedi.com/zodbtools/merge_requests/3

applied. (the MR there is OK and is just waiting for upstream ZODB to
negotiate a way to retrieve transaction extension data in raw form).

Add zodbtools which is generic (contrast to fs1tools) set of ZODB
managing utilities. Only package and command infrastructure here -
actual commands will follow up in the next patches.

Add commands for FileStorage index maintainance: manually rebuild the
index and to performe index verification.

Add various FileStorage-specific dump commands with output being
bit-to-bit exact with the following ZODB/py FileStorage tools:

- fsdump.py
- fsdump.py (verbose dumper)
- fstail.py

Please see the patch for links about this dump formats.

Build FileStorage ZODB driver out of format record loading/decoding
and index routines we just added in previous patches.

The driver supports only read-only mode so far.

Promised tests for data format interoperability with ZODB/py are added.

Build index type on top of fsb.Tree introduced in the previous patch and
add routines to save and load it to/from disk.

We ensure ZODB/py compatibility via generating test FileStorage database
+ its index and checking we can load index from it and also that if we
save an index ZODB/py can load it back. FileStorage index is hard to get
bit-to-bit identical since this index uses python pickles which can
encode the same objects in several different ways.

FileStorage index maps oid to file position storing latest data record
for this oid. This index is naturally to implement via BTree as e.g.
ZODB/py does.

In Go world there is github.com/cznic/b BTree library but without
specialization and working via interface{} it is slower than it could be
and allocates a lot. So generate specialized version of that code with
key and value types exactly suitable for FileStorage indexing.

We use a bit patched b version with speed ups for bulk-loading data via
regular point-ingestion BTree entry point:

	https://lab.nexedi.com/kirr/b x/refill

The patches has not been upstreamed because it slows down general case a
bit (only a bit, but still this is a "no" to me), and because with
dedicated bulk-loading API it could be possible to still load data
several times faster. Still current version is enough for not very-huge
indices.

Btw ZODB/py does the same (see fsBucket + friends).

Start implementing FileStorage support by adding code to load/decode
FileStorage records and way to iterate a FileStorage.

Tests will come in a later patch together with ZODB-level loading
support.

Storage drivers can register themselves via zodb.RegisterDriver.

Later cliens can request to open a storage by URL via zodb.OpenStorage.
The opener will lookup driver registry and wrap created driver instance
with common layer with cache etc to turn an IStorageDriver into fully
working IStorage.

The cache is needed so that we can provide IStorage.Prefetch
functionality generally wrapped on top of a storage driver: when an
object is loaded, the loading itself consists of steps:

1. start loading object into cache,
2. wait for the loading to complete.

This way Prefetch is naturally only "1" - start loading object into
cache but do not wait for the loading to be complete. Go's goroutines
naturally help here where we can spawn every such loading into its own
goroutine instead of explicitly programming loading in terms of a state
machine.

Since this cache is mainly needed for Prefetch to work, not to actually
cache data (though it works as cache for repeating access too), the goal
when writing it was to add minimal overhead for "data-not-yet-in-cache"
case. Current state we are not completely there yet but the latency is
acceptable - depending on the workload the cache layer adds ~

	0.5 - 1 - 3µs

to loading times.

ZODB/py serializes data using python pickles. Basically every serialized
object has two parts: class description and object state. Here we
start by providing minimal functionality to extract class-name from
serialized data.

The library used for pickle decoding (and in later patches encoding) is

	github.com/kisielk/og-rek

It was audited by me for security flaws to some extent.

Contrary to Python pickle module it does not run arbitrary code on
decoding.

Since in ZODB TIDs are corresponding to time, provide functionality to
convert a tid to timestamp. Do so in exactly the same way as ZODB/py
does for interoperability.

Our path of implementing NEO in Go will be not only for server-side, but
also for client-side, since it is needed by Wendelin.core. On
server-side we'll also need to work with types and data model Python
ZODB implementation uses, so here it goes: Start of ZODB in Go.

Here we define ZODB data types, data model and operational interfaces
for IStorage + friends.

The interfaces are currently read-only with stubs for write mode.

Ignore files commonly produced while profiling Go programs and running
tests.

We want to make sure the code can be used by all projects without a
problem. This way the license is GPLv3+ with wide exception for all Free
Software / Open Source projects + Business options.

Nexedi stack is licensed under Free Software licenses with various exceptions
that cover three business cases:

- Free Software
- Proprietary Software
- Rebranding

As long as one intends to develop Free Software based on Nexedi stack, no
license cost is involved. Developing proprietary software based on Nexedi stack
may require a proprietary exception license. Rebranding Nexedi stack is
prohibited unless rebranding license is acquired.

Through this licensing approach, Nexedi expects to encourage Free Software
development without restrictions and at the same time create a framework for
proprietary software to contribute to the long term sustainability of the
Nexedi stack.

Please see https://www.nexedi.com/licensing for details, rationale and options.

( NEO/py for now stays at the old terms but it will be upgraded to the same
  terms as NEO/go eventually )

Sync with current NEO in Python implementation as the first step.

We'll be using some common bits and in particular on-the-wire protocol
must be the same and for py/go interoperability testing we'll also need
python parts.

The issue was that at startup, or after nodes are back, the previous code
prevented full load balancing until some data are written.

It was like this to limit the number of connections, which does not matter
anymore (see commit 77132157).

# Previous status

The issue was that we had extreme storage fragmentation from the point of view
of the replication algorithm, which processes one partition at a time.

By using an autoincrement for the 'data' table, rows were ordered by the time
at which they were added:
- parts may be the result of replication -> ordered by partition, tid, oid
- other rows are globally sorted by tid

Which means that when scanning a given partition, many rows were skipped all
the time:
- if readahead is bigger enough, the efficiency is 1/N for a node with N
  partitions assigned
- else, it is worse because it seeks all the time

For huge databases, the replication was horribly slow, in particular from HDD.

# Chosen solution

This commit changes how ids are generated to somehow split 'data'
per partition. The backend tracks 1 last id per assigned partition, where the
16 higher bits contains the partition. Keep in mind that the value of id has no
meaning and it's only chosen for performance reasons. IOW, a row can be
referred by an oid of a partition different than the 16 higher bits of id:
- there's no migration needed and the 16 higher bits of all existing rows are 0
- in case of deduplication, a row can still be shared by different partitions

Due to https://jira.mariadb.org/browse/MDEV-12836, we leave the autoincrement
on existing databases.

## Downsides

On insertion, increasing the number of partitions now slows down significantly:
for 2 nodes using TokuDB, 4% for 180 partitions, 40% for 2000. For 12
partitions, the difference remains negligible. The solution for this issue will
be to enable to increase the number of partitions efficiently, so that nodes
can keep a small number of them, even for DB that are expected to grow so much
that many nodes are added over time: such feature was already considered so
that users don't have to worry anymore about this obscure setting at database
creation.

Read performance is only slowed down for applications that read a lot of data
that were written contiguously, but split in small blocks. A solution is to
extend ZODB so that the application tells it to chose new oids that will end up
in the same partition. Like for insertion, there should not be too many
partitions.

With RocksDB (MariaDB 10.2.10), it takes a significant amount of time to
collect all last ids at startup when there are many partitions.

## Other advantages

- The storage layout of data is now always the same and does not depend on
  whether rows came from replication or commits.
- Efficient deletion of partition to free space in-place will be possible.

# Considered alternative

The only serious alternative was to replicate as many partitions as possible at
the same time, ideally all assigned partitions, but it's not always possible.
For best performance, it would often require to synchronize new nodes, or even
all of them, so that thesource nodes don't have to scan 'data' several times.

If existing nodes are kept, all data that aren't copied to the newly added
nodes have to be skipped. If the number of nodes is multiplied by N, the
efficiency is 1-1/N at best (synchronized nodes), else it's even worse
because partitions are somehow shuffled.

Checking/replacing a single node would remain slow when there are several
source nodes.

At last, such an algorithm would be much more complex and we would not have the
other advantages listed above.

For existing DB, altering the table may be doable with schema editing and
clean up of sqlite_sequence.