(RHBZ #579854, Debian #561161)

original patch from Sami Farin

Steps to Reproduce:
/sbin/nameif eth1 00:00:10:10:11:11; echo $?

Actual Results:
interface 'eth1' not found
0

Expected Results:
interface 'eth1' not found
1

de.po: warning: Charset "iso8859-1" is not a portable encoding name.
                Message conversion to user's charset might not work.

http://www.gnu.org/licenses/gpl-2.0.html

On a system with a gigabit NIC attached to a 100mbit switch:
	# mii-tool -v eth0
	capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
	advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
	link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control

Clearly the last two fields are swapped, and reading the code supports
this hypothesis.

URL: https://bugs.gentoo.org/393107
URL: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=511395Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Bernd Eckenfels <bernd@eckenfels.net>

These tools provide quite a bit of good information which is available
to non-root users, so let's move them to /bin for people to use.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The tcp/udp/raw protocols duplicate the logic for looking up addresses and
their ports, and then formatting them nicely.  They also duplicate this for
local and remote addresses.  They also encode a few assumptions about the
length of the strings they get back which can cause buffer over and under
flows.

Add a new helper called addr_do_one that unifies all of this duplicate
logic in one place, and handles any string size correctly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

On 64bit systems where sizeof(void *) != sizeof(int), we get a warning
when trying to assign the return of atoi().  So insert a cast to avoid.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Some of these are unused, so drop them.  Others are only used in debug
code, so refactor those so things are always compiled.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

This was causing the %.o rule to get ignored which meant most of the
dependencies were ignored.

Once that gets fixed, we see that the %.o rule doesn't properly use
$(CPPFLAGS).  So add that while we're here.

Gentoo bug 379715

path (in order to make argv[0]="sshd pty/0" display as sshd, and not as /0.

According to the manual the option "--numeric-ports" should not
affect host resolution, but it does. All connected hosts are displayed
with numeric values instead of their FQDN.

patch by Mads Martin Joergensen in Gentoo bug 76756

The kernel really only treats sockets with a value of -1 as an error.
The rest are an unsigned quantity.  So tweak the nestat lookup to use
an unsigned value.

patch based on Antonio Galea's work in Debian bug 345331

patch by pasi.valminen@hut.fi

Gentoo bug 42650

Reported by Toralf

Thanks jwm

newer versions of glibc (like 2.12) have cleaned up headers so you need
to include sys/stat.h explicitly for S_XXX macros

Gentoo bug 332853

Thanks Marco Steinacher for reporting.

patch from Dave Johnson <djohnson@sw.starentnetworks.com> via Debian #433543

When running 'ifconfig' it will not show any IPv6 addresses for
interfaces that have an ifindex > 255.

Because the kernel will increment the ifindex every time an interface
is added or removed, it is not necessary to have 256 interfaces at
once, just creating 256 interfaces since system boot and they will no
longer show IPv6 addresses.

This is due to an improper fscanf() maximum range argument.  Patch to
fix the problem is below.

Example:

st34:~# ip addr list dev eth1.110
268: eth1.110@eth1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
    link/ether 00:e0:81:2a:0d:2d brd ff:ff:ff:ff:ff:ff
    inet6 fd4d:5643:2886:6e::ea:0/64 scope global
       valid_lft forever preferred_lft forever
    inet6 fe80::2e0:81ff:fe2a:d2d/64 scope link
       valid_lft forever preferred_lft forever
st34:~# ifconfig eth1.110
eth1.110  Link encap:Ethernet  HWaddr 00:E0:81:2A:0D:2D
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:676 (676.0 b)

st34:~# grep eth1.110 /proc/net/if_inet6
fd4d56432886006e0000000000ea0000 10c 40 00 80 eth1.110
fe8000000000000002e081fffe2a0d2d 10c 40 20 80 eth1.110
st34:~#

improve dist target: include compiled gettext files, exclude scm files, and always prefix the paths in the tarball with the full versioned name