Initial setuptools / buildout hair for persistent.

CHANGES.txt

+Changes
+=======
+
+1.0 (unreleased)
+----------------
+
+* Initial release, branched from ZODB trunk on 2009-09-18 (aka
+  "3.9.0dev").

COPYRIGHT.txt

+Copyright (c) 2008 Zope Corporation and Contributors.
+All Rights Reserved.

LICENSE.txt

+Zope Public License (ZPL) Version 2.1
+-------------------------------------
+
+A copyright notice accompanies this license document that
+identifies the copyright holders.
+
+This license has been certified as open source. It has also
+been designated as GPL compatible by the Free Software
+Foundation (FSF).
+
+Redistribution and use in source and binary forms, with or
+without modification, are permitted provided that the
+following conditions are met:
+
+1. Redistributions in source code must retain the
+   accompanying copyright notice, this list of conditions,
+   and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the accompanying
+   copyright notice, this list of conditions, and the
+   following disclaimer in the documentation and/or other
+   materials provided with the distribution.
+
+3. Names of the copyright holders must not be used to
+   endorse or promote products derived from this software
+   without prior written permission from the copyright
+   holders.
+
+4. The right to distribute this software or to use it for
+   any purpose does not give you the right to use
+   Servicemarks (sm) or Trademarks (tm) of the copyright
+   holders. Use of them is covered by separate agreement
+   with the copyright holders.
+
+5. If any files are modified, you must cause the modified
+   files to carry prominent notices stating that you changed
+   the files and the date of any change.
+
+Disclaimer
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ``AS IS''
+  AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT
+  NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+  AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+  NO EVENT SHALL THE COPYRIGHT HOLDERS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+  OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+  DAMAGE.

README.txt

+=================
+Persistet objects
+=================
+
+This package contains a generic persistence implementation for Python. It is
+mainly used by the ZODB, though.

buildout.cfg

+[buildout]
+develop = .
+parts = test
+
+[test]
+recipe = zc.recipe.testrunner
+eggs = persistent

ez_setup.py

+#!python
+"""Bootstrap setuptools installation
+
+If you want to use setuptools in your package's setup.py, just include this
+file in the same directory with it, and add this to the top of your setup.py::
+
+    from ez_setup import use_setuptools
+    use_setuptools()
+
+If you want to require a specific version of setuptools, set a download
+mirror, or use an alternate download directory, you can do so by supplying
+the appropriate options to ``use_setuptools()``.
+
+This file can also be run as a script to install or upgrade setuptools.
+"""
+import sys
+DEFAULT_VERSION = "0.6c7"
+DEFAULT_URL     = "http://pypi.python.org/packages/%s/s/setuptools/" % sys.version[:3]
+
+md5_data = {
+    'setuptools-0.6b1-py2.3.egg': '8822caf901250d848b996b7f25c6e6ca',
+    'setuptools-0.6b1-py2.4.egg': 'b79a8a403e4502fbb85ee3f1941735cb',
+    'setuptools-0.6b2-py2.3.egg': '5657759d8a6d8fc44070a9d07272d99b',
+    'setuptools-0.6b2-py2.4.egg': '4996a8d169d2be661fa32a6e52e4f82a',
+    'setuptools-0.6b3-py2.3.egg': 'bb31c0fc7399a63579975cad9f5a0618',
+    'setuptools-0.6b3-py2.4.egg': '38a8c6b3d6ecd22247f179f7da669fac',
+    'setuptools-0.6b4-py2.3.egg': '62045a24ed4e1ebc77fe039aa4e6f7e5',
+    'setuptools-0.6b4-py2.4.egg': '4cb2a185d228dacffb2d17f103b3b1c4',
+    'setuptools-0.6c1-py2.3.egg': 'b3f2b5539d65cb7f74ad79127f1a908c',
+    'setuptools-0.6c1-py2.4.egg': 'b45adeda0667d2d2ffe14009364f2a4b',
+    'setuptools-0.6c2-py2.3.egg': 'f0064bf6aa2b7d0f3ba0b43f20817c27',
+    'setuptools-0.6c2-py2.4.egg': '616192eec35f47e8ea16cd6a122b7277',
+    'setuptools-0.6c3-py2.3.egg': 'f181fa125dfe85a259c9cd6f1d7b78fa',
+    'setuptools-0.6c3-py2.4.egg': 'e0ed74682c998bfb73bf803a50e7b71e',
+    'setuptools-0.6c3-py2.5.egg': 'abef16fdd61955514841c7c6bd98965e',
+    'setuptools-0.6c4-py2.3.egg': 'b0b9131acab32022bfac7f44c5d7971f',
+    'setuptools-0.6c4-py2.4.egg': '2a1f9656d4fbf3c97bf946c0a124e6e2',
+    'setuptools-0.6c4-py2.5.egg': '8f5a052e32cdb9c72bcf4b5526f28afc',
+    'setuptools-0.6c5-py2.3.egg': 'ee9fd80965da04f2f3e6b3576e9d8167',
+    'setuptools-0.6c5-py2.4.egg': 'afe2adf1c01701ee841761f5bcd8aa64',
+    'setuptools-0.6c5-py2.5.egg': 'a8d3f61494ccaa8714dfed37bccd3d5d',
+    'setuptools-0.6c6-py2.3.egg': '35686b78116a668847237b69d549ec20',
+    'setuptools-0.6c6-py2.4.egg': '3c56af57be3225019260a644430065ab',
+    'setuptools-0.6c6-py2.5.egg': 'b2f8a7520709a5b34f80946de5f02f53',
+    'setuptools-0.6c7-py2.3.egg': '209fdf9adc3a615e5115b725658e13e2',
+    'setuptools-0.6c7-py2.4.egg': '5a8f954807d46a0fb67cf1f26c55a82e',
+    'setuptools-0.6c7-py2.5.egg': '45d2ad28f9750e7434111fde831e8372',
+}
+
+import sys, os
+
+def _validate_md5(egg_name, data):
+    if egg_name in md5_data:
+        from md5 import md5
+        digest = md5(data).hexdigest()
+        if digest != md5_data[egg_name]:
+            print >>sys.stderr, (
+                "md5 validation of %s failed!  (Possible download problem?)"
+                % egg_name
+            )
+            sys.exit(2)
+    return data
+
+
+def use_setuptools(
+    version=DEFAULT_VERSION, download_base=DEFAULT_URL, to_dir=os.curdir,
+    download_delay=15
+):
+    """Automatically find/download setuptools and make it available on sys.path
+
+    `version` should be a valid setuptools version number that is available
+    as an egg for download under the `download_base` URL (which should end with
+    a '/').  `to_dir` is the directory where setuptools will be downloaded, if
+    it is not already available.  If `download_delay` is specified, it should
+    be the number of seconds that will be paused before initiating a download,
+    should one be required.  If an older version of setuptools is installed,
+    this routine will print a message to ``sys.stderr`` and raise SystemExit in
+    an attempt to abort the calling script.
+    """
+    try:
+        import setuptools
+        if setuptools.__version__ == '0.0.1':
+            print >>sys.stderr, (
+            "You have an obsolete version of setuptools installed.  Please\n"
+            "remove it from your system entirely before rerunning this script."
+            )
+            sys.exit(2)
+    except ImportError:
+        egg = download_setuptools(version, download_base, to_dir, download_delay)
+        sys.path.insert(0, egg)
+        import setuptools; setuptools.bootstrap_install_from = egg
+
+    import pkg_resources
+    try:
+        pkg_resources.require("setuptools>="+version)
+
+    except pkg_resources.VersionConflict, e:
+        # XXX could we install in a subprocess here?
+        print >>sys.stderr, (
+            "The required version of setuptools (>=%s) is not available, and\n"
+            "can't be installed while this script is running. Please install\n"
+            " a more recent version first.\n\n(Currently using %r)"
+        ) % (version, e.args[0])
+        sys.exit(2)
+
+def download_setuptools(
+    version=DEFAULT_VERSION, download_base=DEFAULT_URL, to_dir=os.curdir,
+    delay = 15
+):
+    """Download setuptools from a specified location and return its filename
+
+    `version` should be a valid setuptools version number that is available
+    as an egg for download under the `download_base` URL (which should end
+    with a '/'). `to_dir` is the directory where the egg will be downloaded.
+    `delay` is the number of seconds to pause before an actual download attempt.
+    """
+    import urllib2, shutil
+    egg_name = "setuptools-%s-py%s.egg" % (version,sys.version[:3])
+    url = download_base + egg_name
+    saveto = os.path.join(to_dir, egg_name)
+    src = dst = None
+    if not os.path.exists(saveto):  # Avoid repeated downloads
+        try:
+            from distutils import log
+            if delay:
+                log.warn("""
+---------------------------------------------------------------------------
+This script requires setuptools version %s to run (even to display
+help).  I will attempt to download it for you (from
+%s), but
+you may need to enable firewall access for this script first.
+I will start the download in %d seconds.
+
+(Note: if this machine does not have network access, please obtain the file
+
+   %s
+
+and place it in this directory before rerunning this script.)
+---------------------------------------------------------------------------""",
+                    version, download_base, delay, url
+                ); from time import sleep; sleep(delay)
+            log.warn("Downloading %s", url)
+            src = urllib2.urlopen(url)
+            # Read/write all in one block, so we don't create a corrupt file
+            # if the download is interrupted.
+            data = _validate_md5(egg_name, src.read())
+            dst = open(saveto,"wb"); dst.write(data)
+        finally:
+            if src: src.close()
+            if dst: dst.close()
+    return os.path.realpath(saveto)
+
+def main(argv, version=DEFAULT_VERSION):
+    """Install or upgrade setuptools and EasyInstall"""
+
+    try:
+        import setuptools
+    except ImportError:
+        egg = None
+        try:
+            egg = download_setuptools(version, delay=0)
+            sys.path.insert(0,egg)
+            from setuptools.command.easy_install import main
+            return main(list(argv)+[egg])   # we're done here
+        finally:
+            if egg and os.path.exists(egg):
+                os.unlink(egg)
+    else:
+        if setuptools.__version__ == '0.0.1':
+            # tell the user to uninstall obsolete version
+            use_setuptools(version)
+
+    req = "setuptools>="+version
+    import pkg_resources
+    try:
+        pkg_resources.require(req)
+    except pkg_resources.VersionConflict:
+        try:
+            from setuptools.command.easy_install import main
+        except ImportError:
+            from easy_install import main
+        main(list(argv)+[download_setuptools(delay=0)])
+        sys.exit(0) # try to force an exit
+    else:
+        if argv:
+            from setuptools.command.easy_install import main
+            main(argv)
+        else:
+            print "Setuptools version",version,"or greater has been installed."
+            print '(Run "ez_setup.py -U setuptools" to reinstall or upgrade.)'
+
+
+
+def update_md5(filenames):
+    """Update our built-in md5 registry"""
+
+    import re
+    from md5 import md5
+
+    for name in filenames:
+        base = os.path.basename(name)
+        f = open(name,'rb')
+        md5_data[base] = md5(f.read()).hexdigest()
+        f.close()
+
+    data = ["    %r: %r,\n" % it for it in md5_data.items()]
+    data.sort()
+    repl = "".join(data)
+
+    import inspect
+    srcfile = inspect.getsourcefile(sys.modules[__name__])
+    f = open(srcfile, 'rb'); src = f.read(); f.close()
+
+    match = re.search("\nmd5_data = {\n([^}]+)}", src)
+    if not match:
+        print >>sys.stderr, "Internal error!"
+        sys.exit(2)
+
+    src = src[:match.start(1)] + repl + src[match.end(1):]
+    f = open(srcfile,'w')
+    f.write(src)
+    f.close()
+
+
+if __name__=='__main__':
+    if len(sys.argv)>2 and sys.argv[1]=='--md5update':
+        update_md5(sys.argv[2:])
+    else:
+        main(sys.argv[1:])
+
+
+
+
+

setup.py

+##############################################################################
+#
+# Copyright (c) 2008 Zope Corporation and Contributors.
+# All Rights Reserved.
+#
+# This software is subject to the provisions of the Zope Public License,
+# Version 2.1 (ZPL).  A copy of the ZPL should accompany this distribution.
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY AND ALL EXPRESS OR IMPLIED
+# WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF TITLE, MERCHANTABILITY, AGAINST INFRINGEMENT, AND FITNESS
+# FOR A PARTICULAR PURPOSE.
+#
+##############################################################################
+
+__version__ = '1.0a1'
+
+import os
+
+from ez_setup import use_setuptools
+use_setuptools()
+
+from setuptools import Extension
+from setuptools import find_packages
+from setuptools import setup
+
+
+here = os.path.abspath(os.path.dirname(__file__))
+README = (open(os.path.join(here, 'README.txt')).read()
+          + '\n\n' +
+          open(os.path.join(here, 'CHANGES.txt')).read())
+
+setup(name='persistent',
+      version=__version__,
+      description='Translucent persistent objects',
+      long_description=README,
+      classifiers=[
+        "Development Status :: 6 - Mature",
+        "License :: OSI Approved :: Zope Public License",
+        "Programming Language :: Python",
+        "Topic :: Database",
+        "Topic :: Software Development :: Libraries :: Python Modules",
+        "Operating System :: Microsoft :: Windows",
+        "Operating System :: Unix",
+        ],
+      author="Zope Corporation",
+      author_email="zodb-dev@zope.org",
+      url="http://www.zope.org/Products/ZODB",
+      license="ZPL 2.1",
+      platforms=["any"],
+      packages=find_packages(),
+      include_package_data=True,
+      zip_safe=False,
+      ext_modules = [Extension(name = 'persistent.cPersistence',
+                               sources= ['persistent/cPersistence.c',
+                                         'persistent/ring.c',
+                                        ],
+                               depends = ['persistent/cPersistence.h',
+                                          'persistent/ring.h',
+                                          'persistent/ring.c',
+                                         ]
+                              ),
+                     Extension(name = 'persistent.cPickleCache',
+                               sources= ['persistent/cPickleCache.c',
+                                         'persistent/ring.c'
+                                        ],
+                               depends = ['persistent/cPersistence.h',
+                                          'persistent/ring.h',
+                                          'persistent/ring.c',
+                                         ]
+                              ),
+                     Extension(name = 'persistent.TimeStamp',
+                               sources= ['persistent/TimeStamp.c',
+                                        ],
+                              ),
+                    ],
+      headers = ['persistent/cPersistence.h',
+                 'persistent/ring.h'],
+      tests_require = [
+        'zope.interface',
+        'zope.testing>=3.7dev',
+        ],
+      test_loader="zope.testing.testrunner.eggsupport:SkipLayers",
+      test_suite="persistent.tests",
+      install_requires=[
+        'zope.interface',
+        ],
+      entry_points = """\
+      [distutils.commands]
+      ftest = zope.testing.testrunner.eggsupport:ftest
+      """
+      )
+