Commit c3de8831 authored by Kirill Smelkov's avatar Kirill Smelkov

software/ors-amarisoft: ue: Reuse SIM object in UE schemas

Less code duplication
parent 07c27e40
......@@ -3,6 +3,8 @@
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"$ref": "sim/input-schema.json#/properties",
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
......@@ -51,52 +53,20 @@
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"$ref": "sim/input-schema.json#/properties/imsi",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"$ref": "sim/input-schema.json#/properties/k",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"$ref": "sim/input-schema.json#/properties/sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"$ref": "../sim/input-schema.json#/properties/opc",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
......@@ -3,6 +3,8 @@
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"$ref": "sim/input-schema.json#/properties",
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
......@@ -53,52 +55,20 @@
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"$ref": "sim/input-schema.json#/properties/imsi",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"$ref": "sim/input-schema.json#/properties/k",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"$ref": "sim/input-schema.json#/properties/sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"$ref": "../sim/input-schema.json#/properties/opc",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
......@@ -3,6 +3,8 @@
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"$ref": "sim/input-schema.json#/properties",
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
......@@ -51,52 +53,20 @@
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"$ref": "sim/input-schema.json#/properties/imsi",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"$ref": "sim/input-schema.json#/properties/k",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"$ref": "sim/input-schema.json#/properties/sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"$ref": "../sim/input-schema.json#/properties/opc",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
......@@ -3,6 +3,8 @@
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"$ref": "sim/input-schema.json#/properties",
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
......@@ -53,52 +55,20 @@
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"$ref": "sim/input-schema.json#/properties/imsi",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"$ref": "sim/input-schema.json#/properties/k",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"$ref": "sim/input-schema.json#/properties/sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"$ref": "../sim/input-schema.json#/properties/opc",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
......@@ -3,6 +3,8 @@
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"$ref": "sim/input-schema.json#/properties",
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
......@@ -51,52 +53,20 @@
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"$ref": "sim/input-schema.json#/properties/imsi",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"$ref": "sim/input-schema.json#/properties/k",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"$ref": "sim/input-schema.json#/properties/sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"$ref": "../sim/input-schema.json#/properties/opc",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
......@@ -3,6 +3,8 @@
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"$ref": "sim/input-schema.json#/properties",
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
......@@ -53,52 +55,20 @@
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"$ref": "sim/input-schema.json#/properties/imsi",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"$ref": "sim/input-schema.json#/properties/k",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"$ref": "sim/input-schema.json#/properties/sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"$ref": "../sim/input-schema.json#/properties/opc",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
......@@ -3,6 +3,8 @@
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"$ref": "sim/input-schema.json#/properties",
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
......@@ -51,52 +53,20 @@
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"$ref": "sim/input-schema.json#/properties/imsi",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"$ref": "sim/input-schema.json#/properties/k",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"$ref": "sim/input-schema.json#/properties/sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"$ref": "../sim/input-schema.json#/properties/opc",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
......@@ -3,6 +3,8 @@
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"$ref": "sim/input-schema.json#/properties",
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
......@@ -53,52 +55,20 @@
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"$ref": "sim/input-schema.json#/properties/imsi",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"$ref": "sim/input-schema.json#/properties/k",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"$ref": "sim/input-schema.json#/properties/sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"$ref": "../sim/input-schema.json#/properties/opc",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
......@@ -3,6 +3,8 @@
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"$ref": "sim/input-schema.json#/properties",
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
......@@ -51,52 +53,20 @@
"default": {{ default_n_antenna_ul }}
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"$ref": "sim/input-schema.json#/properties/imsi",
"default": "{{ default_imsi }}"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"$ref": "sim/input-schema.json#/properties/k",
"default": "{{ default_k }}"
},
"sim_algo": {
"title": "sim_algo",
"$ref": "sim/input-schema.json#/properties/sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"$ref": "../sim/input-schema.json#/properties/opc",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
......@@ -3,6 +3,8 @@
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"$ref": "sim/input-schema.json#/properties",
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
......@@ -53,52 +55,20 @@
"default": {{ default_n_antenna_ul }}
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"$ref": "sim/input-schema.json#/properties/imsi",
"default": "{{ default_imsi }}"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"$ref": "sim/input-schema.json#/properties/k",
"default": "{{ default_k }}"
},
"sim_algo": {
"title": "sim_algo",
"$ref": "sim/input-schema.json#/properties/sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"$ref": "../sim/input-schema.json#/properties/opc",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment