software/ors-amarisoft: ue: Don't render UEsim input schemas for ORS

Those were unused because software.cfg.json.jinja2 explicitly enables UEsim only for bbu != 'ors'.

software/ors-amarisoft/instance-fdd-ors-ue-lte-input-schema.json

-{
-  "type": "object",
-  "$schema": "http://json-schema.org/draft-04/schema",
-  "title": "Input Parameters",
-  "properties": {
-    "rue_addr": {
-      "title": "[Required] Remote UE address",
-      "description": "[Required] Address of remote UE server. Default port is 2152.",
-      "type": "string",
-      "default": ""
-    },
-    "tx_gain": {
-      "title": "Tx gain",
-      "description": "Tx gain (in dB)",
-      "type": "number"
-    },
-    "rx_gain": {
-      "title": "Rx gain",
-      "description": "Rx gain (in dB)",
-      "type": "number"
-    },
-    "dl_earfcn": {
-      "title": "DL EARFCN",
-      "description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
-      "type": "number"
-    },
-    "bandwidth": {
-      "title": "Bandwidth",
-      "description": "Downlink Bandwidth",
-      "type": "string",
-      "enum": [
-        "1.4 MHz",
-        "3 MHz",
-        "5 MHz",
-        "10 MHz",
-        "15 MHz",
-        "20 MHz"
-      ],
-      "default": "20 MHz"
-    },
-    "n_antenna_dl": {
-      "title": "Number of DL antennas",
-      "description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
-      "type": "number",
-      "default": 2
-    },
-    "n_antenna_ul": {
-      "title": "Number of UL antennas",
-      "description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
-      "type": "number",
-      "default": 2
-    },
-    "imsi": {
-      "title": "IMSI",
-      "description": "IMSI",
-      "type": "string",
-      "default": "001010123456789"
-    },
-    "k": {
-      "title": "K",
-      "description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
-      "type": "string",
-      "default": "00112233445566778899aabbccddeeff"
-    },
-    "sim_algo": {
-      "title": "sim_algo",
-      "description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
-      "type": "string",
-      "default": "milenage"
-    },
-    "opc": {
-      "title": "opc",
-      "description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
-      "type": "string",
-      "default": "milenage"
-    },
-    "amf": {
-      "title": "amf",
-      "description": "Range: 0 to 65535. Set the Authentication Management Field.",
-      "type": "string",
-      "default": "0x9001"
-    },
-    "sqn": {
-      "title": "sqn",
-      "description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
-      "type": "string",
-      "default": "000000000000"
-    },
-    "impu": {
-      "title": "impu",
-      "description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
-      "type": "string",
-      "default": ""
-    },
-    "impi": {
-      "title": "impi",
-      "description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
-      "type": "string",
-      "default": ""
-    }
-  }
-}

software/ors-amarisoft/instance-fdd-ors-ue-nr-input-schema.json

-{
-  "type": "object",
-  "$schema": "http://json-schema.org/draft-04/schema",
-  "title": "Input Parameters",
-  "properties": {
-    "rue_addr": {
-      "title": "[Required] Remote UE address",
-      "description": "[Required] Address of remote UE server. Default port is 2152.",
-      "type": "string",
-      "default": ""
-    },
-    "tx_gain": {
-      "title": "Tx gain",
-      "description": "Tx gain (in dB)",
-      "type": "number"
-    },
-    "rx_gain": {
-      "title": "Rx gain",
-      "description": "Rx gain (in dB)",
-      "type": "number"
-    },
-    "dl_nr_arfcn": {
-      "title": "DL NR ARFCN",
-      "description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
-      "type": "number"
-    },
-    "band": {
-      "title": "NR band",
-      "description": "NR band number",
-      "type": "number"
-    },
-    "bandwidth": {
-      "title": "Bandwidth",
-      "description": "Downlink Bandwidth (in MHz)",
-      "type": "number",
-      "default": 40
-    },
-    "ssb_nr_arfcn": {
-      "title": "SSB NR ARFCN",
-      "description": "SSB NR ARFCN, you can retrieve from ENB/GNB side",
-      "type": "number"
-    },
-    "n_antenna_dl": {
-      "title": "Number of DL antennas",
-      "description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
-      "type": "number",
-      "default": 2
-    },
-    "n_antenna_ul": {
-      "title": "Number of UL antennas",
-      "description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
-      "type": "number",
-      "default": 2
-    },
-    "imsi": {
-      "title": "IMSI",
-      "description": "IMSI",
-      "type": "string",
-      "default": "001010123456789"
-    },
-    "k": {
-      "title": "K",
-      "description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
-      "type": "string",
-      "default": "00112233445566778899aabbccddeeff"
-    },
-    "sim_algo": {
-      "title": "sim_algo",
-      "description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
-      "type": "string",
-      "default": "milenage"
-    },
-    "opc": {
-      "title": "opc",
-      "description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
-      "type": "string",
-      "default": "milenage"
-    },
-    "amf": {
-      "title": "amf",
-      "description": "Range: 0 to 65535. Set the Authentication Management Field.",
-      "type": "string",
-      "default": "0x9001"
-    },
-    "sqn": {
-      "title": "sqn",
-      "description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
-      "type": "string",
-      "default": "000000000000"
-    },
-    "impu": {
-      "title": "impu",
-      "description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
-      "type": "string",
-      "default": ""
-    },
-    "impi": {
-      "title": "impi",
-      "description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
-      "type": "string",
-      "default": ""
-    }
-  }
-}

software/ors-amarisoft/instance-tdd-ors-ue-lte-input-schema.json

-{
-  "type": "object",
-  "$schema": "http://json-schema.org/draft-04/schema",
-  "title": "Input Parameters",
-  "properties": {
-    "rue_addr": {
-      "title": "[Required] Remote UE address",
-      "description": "[Required] Address of remote UE server. Default port is 2152.",
-      "type": "string",
-      "default": ""
-    },
-    "tx_gain": {
-      "title": "Tx gain",
-      "description": "Tx gain (in dB)",
-      "type": "number"
-    },
-    "rx_gain": {
-      "title": "Rx gain",
-      "description": "Rx gain (in dB)",
-      "type": "number"
-    },
-    "dl_earfcn": {
-      "title": "DL EARFCN",
-      "description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
-      "type": "number"
-    },
-    "bandwidth": {
-      "title": "Bandwidth",
-      "description": "Downlink Bandwidth",
-      "type": "string",
-      "enum": [
-        "1.4 MHz",
-        "3 MHz",
-        "5 MHz",
-        "10 MHz",
-        "15 MHz",
-        "20 MHz"
-      ],
-      "default": "20 MHz"
-    },
-    "n_antenna_dl": {
-      "title": "Number of DL antennas",
-      "description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
-      "type": "number",
-      "default": 2
-    },
-    "n_antenna_ul": {
-      "title": "Number of UL antennas",
-      "description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
-      "type": "number",
-      "default": 2
-    },
-    "imsi": {
-      "title": "IMSI",
-      "description": "IMSI",
-      "type": "string",
-      "default": "001010123456789"
-    },
-    "k": {
-      "title": "K",
-      "description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
-      "type": "string",
-      "default": "00112233445566778899aabbccddeeff"
-    },
-    "sim_algo": {
-      "title": "sim_algo",
-      "description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
-      "type": "string",
-      "default": "milenage"
-    },
-    "opc": {
-      "title": "opc",
-      "description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
-      "type": "string",
-      "default": "milenage"
-    },
-    "amf": {
-      "title": "amf",
-      "description": "Range: 0 to 65535. Set the Authentication Management Field.",
-      "type": "string",
-      "default": "0x9001"
-    },
-    "sqn": {
-      "title": "sqn",
-      "description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
-      "type": "string",
-      "default": "000000000000"
-    },
-    "impu": {
-      "title": "impu",
-      "description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
-      "type": "string",
-      "default": ""
-    },
-    "impi": {
-      "title": "impi",
-      "description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
-      "type": "string",
-      "default": ""
-    }
-  }
-}

software/ors-amarisoft/instance-tdd-ors-ue-nr-input-schema.json

-{
-  "type": "object",
-  "$schema": "http://json-schema.org/draft-04/schema",
-  "title": "Input Parameters",
-  "properties": {
-    "rue_addr": {
-      "title": "[Required] Remote UE address",
-      "description": "[Required] Address of remote UE server. Default port is 2152.",
-      "type": "string",
-      "default": ""
-    },
-    "tx_gain": {
-      "title": "Tx gain",
-      "description": "Tx gain (in dB)",
-      "type": "number"
-    },
-    "rx_gain": {
-      "title": "Rx gain",
-      "description": "Rx gain (in dB)",
-      "type": "number"
-    },
-    "dl_nr_arfcn": {
-      "title": "DL NR ARFCN",
-      "description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
-      "type": "number"
-    },
-    "band": {
-      "title": "NR band",
-      "description": "NR band number",
-      "type": "number"
-    },
-    "bandwidth": {
-      "title": "Bandwidth",
-      "description": "Downlink Bandwidth (in MHz)",
-      "type": "number",
-      "default": 40
-    },
-    "ssb_nr_arfcn": {
-      "title": "SSB NR ARFCN",
-      "description": "SSB NR ARFCN, you can retrieve from ENB/GNB side",
-      "type": "number"
-    },
-    "n_antenna_dl": {
-      "title": "Number of DL antennas",
-      "description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
-      "type": "number",
-      "default": 2
-    },
-    "n_antenna_ul": {
-      "title": "Number of UL antennas",
-      "description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
-      "type": "number",
-      "default": 2
-    },
-    "imsi": {
-      "title": "IMSI",
-      "description": "IMSI",
-      "type": "string",
-      "default": "001010123456789"
-    },
-    "k": {
-      "title": "K",
-      "description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
-      "type": "string",
-      "default": "00112233445566778899aabbccddeeff"
-    },
-    "sim_algo": {
-      "title": "sim_algo",
-      "description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
-      "type": "string",
-      "default": "milenage"
-    },
-    "opc": {
-      "title": "opc",
-      "description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
-      "type": "string",
-      "default": "milenage"
-    },
-    "amf": {
-      "title": "amf",
-      "description": "Range: 0 to 65535. Set the Authentication Management Field.",
-      "type": "string",
-      "default": "0x9001"
-    },
-    "sqn": {
-      "title": "sqn",
-      "description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
-      "type": "string",
-      "default": "000000000000"
-    },
-    "impu": {
-      "title": "impu",
-      "description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
-      "type": "string",
-      "default": ""
-    },
-    "impi": {
-      "title": "impi",
-      "description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
-      "type": "string",
-      "default": ""
-    }
-  }
-}

software/ors-amarisoft/render-templates

@@ -97,6 +97,9 @@ for software in software_list:
     emit('software-{}.cfg'.format(software['software_name']),
          software_template.render(**software, **global_context))
     for software_type in ['enb', 'gnb', 'ue-lte', 'ue-nr']:
+        # no ue for ors
+        if software['bbu'] == 'ors' and software_type.startswith('ue-'):
+            continue
         emit('instance-{}-{}-input-schema.json'.format(
                software['software_name'],
                software_type),