- 18 Jan, 2024 2 commits
-
-
Kirill Smelkov authored
Dnsmasq insists on dhcp-range's prefixlen to be at most 64, which triggers the following error if original slaptap is wider than that: dnsmasq: prefix length must be at least 64 at line 5 of /srv/slapgrid/slappart6/etc/dnsmasq.cfg -> Fix it by capping provided range to /64 /reported-by @lu.xu /cc @jhuge, @tomo, @xavier_thompson, @Daetalus
-
Kirill Smelkov authored
To run tapsplit we use plone.recipe.command with both command and update-command set to `tapsplit ...`. But tapsplit, when run, fully recreates and reinitializes subtap interfaces, which leads to interfering with running enb because subtap interfaces, that enb started to use, are removed. This is not desirable behaviour. What we need: 1) create subtap interfaces only once and keep them stable 2) until configuration changes which should lead to * subtaps recreated, and * enb restarted Carefully reading plone.recipe.command documentation shows: command Command to run when the buildout part is installed. update-command Command to run when the buildout part is updated. This happens when buildout is run BUT THE CONFIGURATION FOR THIS BUILDOUT PART HAS NOT CHANGED. (emphasis mine) So the fix looks to be to make update-command noop - this fulfills requirement "1". For "2" - I've verified that when configuration changes, e.g. number of RU changes, buildout reinstalls [vtap] section from scratch, and it also should restart enb, because generated enb.cfg changes. So the fix is fully correct because it satifies all needed requirements. Amends 49ce8ef5 (software/ors-amarisoft: Provide dedicated TAP interface for each Radio Unit) /cc @jhuge, @lu.xu, @tomo, @xavier_thompson, @Daetalus
-
- 13 Jan, 2024 1 commit
-
-
Jérome Perrin authored
our new nexedi.org currently no longer serve static pages with links, using absolute links should allow us to have test passing until this is fixed.
-
- 12 Jan, 2024 1 commit
-
-
Thomas Gambier authored
-
- 11 Jan, 2024 3 commits
-
-
Jérome Perrin authored
-
Jérome Perrin authored
These partition references should be kept short, they are a mechanism to use a short path for unix sockets, because unix socket paths can not exceed 108 characters. When running the test in theia, this was causing errors: # [ALERT] (100453) : config : parsing [/srv/slapgrid/slappart15/srv/runner/instance/slappart7/tmp/inst/with-max-rlimit-nofile6/etc/haproxy.cfg:37] : log : socket path '/srv/slapgrid/slappart15/srv/runner/instance/slappart7/tmp/inst/with-max-rlimit-nofile6/var/run/log.sock' too long (max 97
-
Jérome Perrin authored
-
- 05 Jan, 2024 1 commit
-
-
Kirill Smelkov authored
Currently, due to ensure_ascii=True default of json.dumps, we are insisting on our JSON schemas to be ascii-only and all other characters to be represented by \uxxxx escapes. So far this was not problematic as all our schemas contains only ASCII characters, but upcoming ors-amarisoft changes want to use e.g. "→" symbol: https://lab.nexedi.com/kirr/slapos/blob/b51f5523/software/ors-amarisoft/software.cfg.json#L15 which currently results in failure of json-schema test: FAIL: test_ors-amarisoft_software_cfg_json_format (slapos.test.test_json_schema.TestJSONSchemaValidation) ... First differing element 14: ' "title": "\\u2192 eNB/gNB | Radio Unit",' ' "title": "→ eNB/gNB | Radio Unit",' And in general, in 2023 I think there is no reason to insist on our schemas to be ASCII-only: say if one wants to describe something about "α" parameter. It would be good to use that α character directly and seeing it in the editor, instead of using escapes all the time. As indicated by below stackoverflow answer "JSON spec requires UTF-8 support by decoders": https://stackoverflow.com/a/594881/9456786 , and indeed checking JSON specification also confirms that by default JSON decoders shall use UTF-8: https://datatracker.ietf.org/doc/html/rfc7159#section-8.1 This way, I think, we can switch to UTF-8 safely. /reviewed-by @jerome, @lu.xu /reviewed-on !1498
-
- 04 Jan, 2024 1 commit
-
-
Thomas Gambier authored
-
- 02 Jan, 2024 3 commits
-
-
Łukasz Nowak authored
-
Ivan Tyagov authored
See merge request nexedi/slapos!1499
-
Ivan Tyagov authored
-
- 29 Dec, 2023 1 commit
-
-
Lu Xu authored
-
- 28 Dec, 2023 3 commits
-
-
Levin Zimmermann authored
/reviewed-by @kirr and @jerome /reviewed-on nexedi/slapos!1494
-
Levin Zimmermann authored
wendelin.core 2.0.alpha3.post9 supports golang 1.21: with this new version we can set golang 1.21 as the new default. /reviewed-by @kirr and @jerome /reviewed-on nexedi/slapos!1494
-
Levin Zimmermann authored
Go1.21 already has the fifth minor revision (released 2023-12-05) and should therefore already be sufficiently stable. Furthermore we need it to fix a bug in a NEO/go dependency [1]. Please find all details in the official release note: https://go.dev/doc/go1.21 It was released on 2023-08-08 [2]. Due to the go promise of compatibility most software should still compile without any problems. In golang < 1.21 we needed to patch golang to fix https://github.com/golang/go/issues/42525. In golang 1.21 we still need to apply a fix, but can't apply the old patch because the code changed. In golang > 1.21 this problem is already fixed with https://go-review.googlesource.com/c/go/+/520055. Because of https://github.com/golang/go/commit/092671423cd95eaa6df93eb29442fef41504d097 'TestUnshareMountNameSpace' fails on golang 1.21 [3]. In golang 1.20 this test was skipped [4]. To fix this failure the additional patch 'skip-unshare-mount-test.patch' has been added. --- [1] nexedi/wendelin.core!22 (comment 195769)] [2] https://go.dev/doc/devel/release [3] --- FAIL: TestUnshareMountNameSpace (0.18s) exec_linux_test.go:243: unshare failed: exit status 2 unshare: mount /tmp/TestUnshareMountNameSpace2210137852/001 failed: 0x1 [4] === RUN TestUnshareMountNameSpace exec_linux_test.go:333: kernel prohibits unshare in unprivileged process, unless using user namespace — SKIP: TestUnshareMountNameSpace (0.00s) /reviewed-by @kirr and @jerome /reviewed-on nexedi/slapos!1494
-
- 25 Dec, 2023 8 commits
-
-
Jérome Perrin authored
-
Jérome Perrin authored
This version is compatible with gcc 12
-
Jérome Perrin authored
-
Jérome Perrin authored
using https://github.com/ilevkivskyi/com2ann
-
Jérome Perrin authored
drop versions not running on debian 12 and add new versions
-
Jérome Perrin authored
This was disabled to "keep compatibility with current font selection problems", but I don't think we need to care about compatibility for this. This was anyway causing a problem that system fontconfig will be used if it's available, so it's better to define things explictly to prevent falling back to system configuration.
-
Jérome Perrin authored
This caused cloudooo to select different fonts, because LibreOffice-bin comes with some Noto fonts and fontconfig now prefers Noto font
-
Jérome Perrin authored
Testing conversion of HTML with font-family:"FontFamily FontVariant" CSS rule does not really make sense. Remove a few cases for which the behavior is not stable.
-
- 20 Dec, 2023 1 commit
-
-
Titouan Soulard authored
Using RegExp to validate hostnames is a bad practice, and has a lot of reasons to be wrong. On top of that, the JSON Schema specification allows, since draft 7, to validate hostnames against an IDN hostname, by using the `idn-hostname` format. With these changes, IDN are now supported (.рф and .中國 for instance), and long TLD should not be a problem anymore.
-
- 19 Dec, 2023 1 commit
-
-
Jérome Perrin authored
With backported fixes so that old software supports debian 12
-
- 18 Dec, 2023 2 commits
-
-
Jérome Perrin authored
In 9636d79c (Nextcloud Upgrade fixes, 2023-12-13) parameter changed: - instance.trusted-domain-* parameters are replaced by instance.trusted-domain-list - the frontend is part of trusted domain, so with "bypassed" frontends from slapos proxy the backend appears twice (because the backend URL is returned as frontend URL)
-
Jérome Perrin authored
This actually updates firefox from version 68 to version 115
-
- 15 Dec, 2023 1 commit
-
-
Jérome Perrin authored
So that we can see when something changes.
-
- 14 Dec, 2023 6 commits
-
-
Lu Xu authored
-
Lu Xu authored
See merge request nexedi/slapos!1486
-
Lu Xu authored
-
Lu Xu authored
Use runTestSuite interface to launch tests that request instances on actual SlapOS cloud.
-
Jérome Perrin authored
-
Jérome Perrin authored
-
- 13 Dec, 2023 5 commits
-
-
Jérome Perrin authored
As described in https://github.com/msgpack/msgpack-python#major-breaking-changes-in-msgpack-10 raw is False by default for unpacker so we receive strings, not bytes
-
Alain Takoudjou authored
See merge request nexedi/slapos!1490
-
Jérome Perrin authored
ZODB4 does not support python3
-
Jérome Perrin authored
These must be installed through dependencies, but we explicitly need scripts from supervisor because this is used by slapos-core tests
-
Jérome Perrin authored
on python3 we use lzma directly
-