This reverts commit a2f192cb. This has
been merged upstream with nexedi/neoppod@17af7f27.
We should rather cherry-pick upstream commit.

This reverts commit b9a42957. In
nexedi/neoppod!18 and
nexedi/neoppod!21 a common
solution for a zurl format was found. This common format keeps
credentials in the query, therefore we should revert patch
b9a42957.

This reverts the py part of kirr/neo@8c974485.
go parts of this patch are handled in 70c0a984.

This reverts commit cf685fb5. This used
to be a divergence between NEO/py and NEO/go, however in nexedi/neoppod!18 and
nexedi/neoppod!21 a common
solution for a zurl format was found. This common format keeps
credentials in the query, therefore we should revert patch
cf685fb5.

This reverts commit 6047f893 in order to
replace it with py upstream commit nexedi/neoppod@22ccebd6.

NEO/go and NEO/py zurl format diverged over time:

- kirr/neo@8c974485

However with nexedi/neoppod!21 a
common solution was found. From there, this patch aims to adjust NEO/go zurl
format to be in sync with NEO/py zurl format again.

* master:
  go/zodb: Handle common options in zurl in generic layer

/reviewed-by @kirr
/reviewed-on kirr/neo!4

* kirr/t+new-uri:
  Revert "Y client: Adjust URI scheme to move client-specific options to fragment"
  fixup! client.go: Fix URI client option parsing for supported + unsupported options
  client.go: Fix URI client option parsing for supported + unsupported options
  fixup! client_test: Add tests for NEO URI parser
  client_test: Add tests for NEO URI parser
  fixup! client: Refactor openClientByURL for easier testing
  client: Refactor openClientByURL for easier testing
  Y go/zodb: Handle common options in zurl in generic layer

Offload drivers from handling options such as ?read-only=1 and force
them to deal with such options only via DriverOptions, never zurl.

See added comment for details.

/reviewed-by @levin.zimmermann
/reviewed-on kirr/neo!4

This reverts commit kirr/neo@4c9414ea.
This patch was added at a time when nexedi/neoppod!18 wasn't
resolved yet, but we already wanted to proceed with WCFS. Now the NEO MR
is resolved and we decided to mostly leave the NEO zurl as it was
originally implemented in nexedi/neoppod!6.
This means we don't need this patch anymore which changed the NEO
zurl format.

readonly is handled by common zodb.OpenDriver.

Before this patch, the parser ignored options which were already supported
by the client (for instance 'read-only') and even raised an error. But the
client can already use this option: as a9246333 describes this should happen in the
local storage URL parser.

Furthermore not-yet-supported client options (for instance compress) broke
the NEO client before this patch. Now these options only raise a warning which
informs the user that they are ignored. Why? We want to use pre-complete NEO
in real-world projects together with NEO/py clusters. Those real-world projects
may already specify options which aren't supported by our NEO/go client yet.
But it doesn't matters so much, because those options are mostly
relevant for other NEO/py cluster clients (e.g. zope nodes). Instead of
filtering those parameters before parsing them to NEO/go in a higher
level (e.g. SlapOS), NEO/go should already support any valid NEO URL
and raise warnings for not yet implemented features.

- use simplified parseURL signature - DriverOptions are not passed nor changed there.
- read-only is handled by generic zodb layer not neo.parseURL .

This test was missing so far. Particularly recent changes of the
NEO URI scheme [1], but also problems with valid old URI [2] stressed
out the necessity for comprehensive NEO URI parser tests.

[1] kirr/neo@4c9414ea
[2] 573514c6 (comment 184417)

- no need to pass DriverOptions into parseURL - it is only zurl that is
  parsed, and also DriverOptions should not be changed by the opener.

- no need to document "If anything fails within this process an error
  and nil are returned." because that is standard omnipresent Go convention.

With all the recent changes of the NEO URI scheme we need to reliably test
the function which parses the URI and convert it into the different
parameter. Testing is much simpler if we can only analyse how the URI
parsing works. Therefore this patch moves NEO URI parsing to an
external function.

Offload drivers from handling options such as ?read-only=1 and force
them to deal with such options only via DriverOptions, never zurl.

See added commend for details.

I missed the following build failure in go/neo/cmd:

    # lab.nexedi.com/kirr/neo/go/neo/cmd/neo
    ./storage.go:128:37: cannot use master (variable of type string) as []string value in argument to neo.NewStorage

See kirr/neo!2 for discussion,
context and details.

/reviewed-by @kirr

* t-with-multiple-master-nodes:
  fixup! client_test: Add nmaster={1,2} to test matrix
  fixup! client_test: Support test cluster /w >1 master
  fixup! TalkMaster: Switch master if dialed M is secondary
  fixup! Node: Add support for NEO cluster with > 1 master
  fixup! Dial: Catch NotPrimaryMaster & return custom error
  fixup! proto: Implement Error for NotPrimaryMaster
  fixup! proto.NotPrimaryMaster: Fix .Primary data type (2)
  fixup! proto.NotPrimaryMaster: Fix .Primary data type (1)
  client_test: Add nmaster={1,2} to test matrix
  client_test: Support test cluster /w >1 master
  proto.NotPrimaryMaster: Fix .Primary data type
  TalkMaster: Switch master if dialed M is secondary
  Dial: Catch NotPrimaryMaster & return custom error
  proto: Implement Error for NotPrimaryMaster
  openClientByURL: Fix for >1 master (split URL host)
  Client.URL: Fix incomplete URL if > 1 master nodes
  Node: Add support for NEO cluster with > 1 master

Actually do test nmaster=2 case.

- show all options in error context and ran test kind

- skip nmaster > 1 for NEO/go as that is currently not implemented on NEO/go server

- use json for interacting with runneo.py, so that we can use
  whatever builtin type for any argument without hardcoding ad-hoc
  handling of specific arguments inside runneo.py.

- adjust comments + cosmetics

- validate received NotPrimaryMaster
- use Address.String() instead of printf with format that works only for ipv6
- add some logging, comments and TODO

- no need to keep Node.MasterAddr anymore - the address of current PM is
  managed by TalkMaster and is provided as part of operational context
  to user functions that TalkMaster runs.

- correct docstrings.

- cosmetics.

Expect NotPrimaryMaster only if we are trying to connect to a master.

Provide details in the error message.

Change .Promary type from int8 back to int32.

5d93e434 says that .Primary type is not NodeID. That is true, but
changing it to int8 was a mistake:

1. PSignedNull is explicitly defined to come with '!l' struct code, which
   according to https://docs.python.org/3/library/struct.html#module-struct
   comes as 4-bytes integer on the wire:

   https://lab.nexedi.com/nexedi/neoppod/blob/v1.12-13-gf2ea4be2/neo/lib/protocol.py#L560-562

2. verifying this via serializing NotPrimaryMaster on NEO/py also
   confirms that .Primary occupies 4 bytes, not one:

   In [1]: from neo.lib.protocol import NotPrimaryMaster

   In [2]: NotPrimaryMaster(0x01020304, [('m111', 111), ('m222', 222)])._body
   Out[2]: '\x01\x02\x03\x04\x00\x00\x00\x02\x00\x00\x00\x04m111\x00o\x00\x00\x00\x04m222\x00\xde'
            ^^^^^^^^^^^^^^^^
            NOTE  NOTE  NOTE

-> change .Primary type back to being 4-bytes integer, but to int32
instead of NodeID because, as 5d93e434 correctly says, .Primary comes as
array index, not a node ID. The following place of NEO/py code
explicitly confirms this:

https://lab.nexedi.com/nexedi/neoppod/blob/v1.12-13-gf2ea4be2/neo/master/handlers/identification.py#L155-159

Add corresponding test.

Rerun `go generate`. As the diff in zproto-marshal.go shows changing
NotPrimaryMaster.Primary type from NodeID to int8 actually does make a
difference. This happens because NodeID type is based on int32 and
changing that to int8 changes how NotPrimaryMaster structure is layed
out in memory and on the wire.

The changes to zproto-marshal.go in 5d93e434 seem to be done by hand
and not matching the change to proto.go even though head of
zproto-marshal.go says

	// Code generated by protogen.go; DO NOT EDIT.

Tests should work with both one master or more than one masters.

Now it's possible to run client tests against a NEO cluster which
has more than one master nodes. We need this adjustement in order
to test NEO/go client modification in order to support more than
one master node.

The '.Primary' attribute of the 'NotPrimaryMaster' packet has been
assigned to 'NodeID' data type. This is incorrect, because the data
doesn't represent the ID of the node, but an index of the
'.KnownMasterList' [1]. In the old protocol NEO/py therefore also
used 'PSignedNull' instead of 'PUUID' [2]. This patches fixes the data
type of '.Primary' and uses 'int8' instead of 'NodeID'. Technically this
doesn't make any difference, but semantically for human beings the code
is easier to understand now.

[1] https://lab.nexedi.com/nexedi/neoppod/blob/c6453626/neo/lib/handler.py#L161
[2] https://lab.nexedi.com/nexedi/neoppod/blob/c6453626/neo/lib/protocol.py#L716

When connecting to a master node, the client needs to try a different
master if the initially tried one is a secondary master node. This
statement wasn't implemented yet before this patch and therefore it was
good luck if the initally tried master was the primary one - and the
connection worked - or if it was a secondary master - and the client
got stuck in re-trying the same node forever. This patch makes NEO/go
usage with clusters of more than one master therefore much more stable.

After initial handshake a NEO node checks the identification of its peer
by sending the 'RequestIdentification' packet. In case the peer is a
secondary master it responds with 'NotPrimaryMaster'. Before this patch
'Dial' ignored the 'NotPrimaryMaster' packet and simply returned a
general error. Now - after this patch - 'Dial' returns an instance of
'proto.NotPrimaryMaster' (which implements 'Error').
This helps a caller to correctly handle the secondary-master-case, which
otherwise is impossible to differentiate from any other error
possibility.

When a client receives 'NotPrimaryMaster' from a secondary master, the
situation is similar to the situation when we receive an error: the
other node tells us, don't connect with me, connect with someone else.
Finally the peer even closes the connection.

Due to this similarity in structure (& because it helps us later to
teach NEO/go to correctly handle 'NotPrimaryMaster' with minimal
changes), we implement 'Error' for 'proto.NotPrimaryMaster'. Now
'NotPrimaryMaster' can be treated like an error.

In a NEO URI more than one master node can be specified, because a NEO
cluster may have more masters than one. But before this patch
'openClientByURL' always assumed that the given URL only specifies one
master. Now the host is split into potentially > 1 master nodes. It
therefore works now in the same way as the Python implementation [1].

[1] https://lab.nexedi.com/nexedi/neoppod/blob/342168cd/neo/client/zodburi.py#L64

Before this patch Client.URL didn't contain more than one master node.
This can be problematic in case we have a cluster with > 1 master nodes
and the printed master is a secondary master (which may be down). In
this case the user who trusts the "URL" attribute to connect to the
cluster won't succeed, because the primary master can't be reached.

Some NEO clusters have more than one master to gain a higher availability.
Before this patch NEO/go Node type only handled one master address. This
commit adjusts the node type and related bits so that it can support more than
one master node.

/reviewed-by @kirr
/reviewed-on !5

* t-fix-flaky-testload:
  fixup! neonet/newlink: Fix lost conn in encoding detector
  go/neo/neonet: Fix client handshake not to accept server encoding if it is different from what client indicated
  go/neo/neonet: Demonstrate problem in handshake with NEO/py
  go/neo/neonet: Dedicate an error type to indicate "protocol version mismatch" as handshake failure cause
  fixup! client_test: Keep NEO srv logs if test fails
  fixup! client_test/NEOSrv += LogContent for better debug
  neonet/newlink: Fix lost conn in encoding detector
  client_test: Keep NEO srv logs if test fails
  client_test += print NEO server log if >=1 test(s) failed
  client_test/NEOSrv += LogContent for better debug

* master:
  go/neo/neonet: Fix client handshake not to accept server encoding if it is different from what client indicated
  go/neo/neonet: Demonstrate problem in handshake with NEO/py
  go/neo/neonet: Dedicate an error type to indicate "protocol version mismatch" as handshake failure cause

go/neo/neonet: Fix client handshake not to accept server encoding if it is different from what client indicated

If the peers encoding is different than our encoding two different
scenarios can happen, because the handshake order is undefined (e.g.
we don't know if our handshake is received before the peer sends its
handshake):

1. Our handshake is received before peer sends its handshake, NEO/py
closes connection if it sees unexpected magic, version, etc.

2. The client already sends a handshake before it proceeds our handshake.
In this case it initally sends us it version, we can extract its encoding,
and only later, once it proceeded our handshake with the bad encoding,
it closes the connection.

Before this patch case (2) wasn't handled correctly by the automatic
encoding detection of 'DialLink'. 'DialLink' simply accepted the
different-than-expected encoding, but once the peer proceeded the nodes
handshake the peer closed the connection and the initially established
and returned link was immediately closed again. Due to this it was good
luck whether connecting with a peer different with an encoding different
from the expected one worked or didn't work (it depended on which handshake
was faster). Now 'DialLink' should reliably find the correct encoding
and return a stable link.

--------

kirr: this is based on the following original patch by Levin: f6b59772

I updated documentation throughout correspondingly and also added
corresponding handshake-specific test in the previous patch.

See kirr/neo!5 and b2da69e2
(go/neo/neonet: Demonstrate problem in handshake with NEO/py) for more
in-depth description of the problem.