Merge checkin made from a wrong project.

Believe it or not, ZopeUndo is ZEO code, not Zope code.

r29726 | slinkp | 2005-03-30 02:11:22 -0500 (Wed, 30 Mar 2005) | 3 lines
Changed paths:
   M /Zope/trunk/lib/python/ZopeUndo/Prefix.py
   M /Zope/trunk/lib/python/ZopeUndo/tests/testPrefix.py

Merged slinkp_1726_zopeundo: avoid showing undo transactions in
the wrong folder.

This always slept for 3 seconds, waiting for the storage to
disconnect.  This loses on two counts:

1. Since the timeout is set to 1 second, it typically sleeps
   longer than necessary.

2. Since there's no predicting thread and process scheduling,
   3 seconds isn't always long enough, and rare failures have
   been reported against this test.

Instead we do a polling loop now.  This typically succeeds in
a little more than a second, speeding the normal case.  The
loop will continue trying for up to a minute if not.

Change default port # from 9999 to 8100, to match zope.conf
(well, on Zope trunk anyway -- the ZEO client example appears
to have gone missing from zope.conf on Zope3 trunk).

s/zeo/ZEO/ in logger name, to match other ZEO logger names.

Collector #1734.  Critical bug in BTree conflict resolution.

Stop silent data loss in some BTree cases where a transaction adds
a new key to a bucket while a concurrent transaction deletes all
keys from the same bucket.

Still needs porting to 3.2 line.

Various Zopes probably need changes too (to avoid the new deprecation
warnings).

Jim (Fulton) points out that it's not entirely clear that
the new format can't be read by older ZODBs, and Tim doesn't
think it's worth the bother to find out for sure.

Added news blurbs about fsIndex improvements, and about that
.index files written by 3.4 won't be readable by earlier ZODBs.

test.py ran these tests ran after "setup build_ext -i", but
not after "setup build".  Repaired by teaching setup.py to
copy more stuff out of the relevant directories.

There's a mystery:  the tests for it appear to run after
"build_ext -i", but not after "build".  But that appears
to be true for the long-stitched-in zope.interface too.

This introduces a "multi-database" concept (a simplification
of Jim's Wiki proposal), and adds many interface definitions.

Work done during the PyCon 2005 ZODB sprint, by Christian
Theune, Jim Fulton and Tim Peters.

No commit message

Add a record iteration protocol to FileStorage.  You can use the record iterator to iterate over all current revisions
of data pickles in the storage.

In order to support calling via ZEO, we don't implement this as an actual iterator.  An example of using the record iterator
protocol is as follows:

storage = FileStorage('anexisting.fs')
next_oid = None
while 1:
    oid, tid, data, next_oid = storage.record_iternext(next_oid)
    # do something with oid, tid and data
    if next_oid is None:
        break

The behavior of the iteration protocol is now to iterate over all current records in the database in ascending oid order, 
although this is not a promise to do so in the future.

Document exclude{min,max}.

The ZODB4 BTrees excludemin/excludemax arguments got implemented
in 3.3, but the corresponding changes to the BTrees interface
file got dropped on the floor.

Merge checkin made from a wrong project:

r29511 | gotcha | 2005-03-16 11:01:21 -0500 (Wed, 16 Mar 2005) | 1 line
Changed paths:
   M /Zope/trunk/utilities/ZODBTools/zodbload.py

port features from 2.7

Backward compatibility hack for ZODB.Persistent{List,Mapping}.

Allow those old (ZODB 3.2) dotted paths to work again.

Fallout:  testPersistentMapping.py hasn't actually run anything
for a long time, due to a mysterious "return None" at the start
of its test_suite() function.  Removed that.  Then its
checkNewPicklesAreSafe test failed.  Spent 15 minutes on that,
and gave up -- I'm still not even sure what it's _trying_ to
test.  Changed it to a TODO.

Add more words about __del__ methods.

r29290 | frerich | 2005-02-24 17:36:00 -0500 (Thu, 24 Feb 2005)
Changed paths:
   M /Zope3/trunk/src/ZODB/tests/dbopen.txt
   ...
   minor editing

r29247 | gintautasm | 2005-02-22 06:40:26 -0500 (Tue, 22 Feb 2005)
Changed paths:
   M /Zope3/trunk/src/BTrees/Interfaces.py
   ...
   More minor nitpicks.  This should be the last one.

Also:  s/3.3/3.4/g, since the trunk represents 3.4 development now.
s/ZODB3/ZODB/g, since we stopped calling the module ZODB3 when we
moved from CVS to SVN, and ZODB4 isn't talked about anywhere anymore.
Updated recommended Python version to 2.3.5.

positive_id():  Use a trick from Armin Rigo to deduce the
native platorm address size.

Port from ZODB 3.2.

Change FileStorage .restore() and .store() to update max oid in use.

This is the last of the checkins to fix critical bugs involving rare cases
where a FileStorage could end up reusing old oids for new objects.

Port from ZODB 3.2.

Stop believing the maximum oid cached in a FileStorage's .index file.

This is a critical bugfix, although the problems it addresses are
(a) rare; and, (b) not entirely fixed yet (more checkins to come).

The true max oid is found efficiently now by exploiting the recently-added
fsIndex.maxKey() method (which was, of course, added for this purpose).

Also fix that the .index file could get updated on disk when the
FileStorage was opened in read-only mode.  The code was trying to prevent
this, but missed the most obvious rewrite path.

Incidentally improved many obsolete and/or incorrect comments.

Port from ZODB 3.2.

Give fsIndex an efficient maxKey() implementation.

This will (in a later checkin) be used to give FileStorage an "obviously
correct" way to determine the largest oid used in an .fs.index file.