Commit 91a92592 authored by Juliusz Chroboczek's avatar Juliusz Chroboczek

Document the HMAC options in manual page.

parent bc6909f4
......@@ -322,6 +322,22 @@ source-specific routes. The default is 10.
.BI first-rule-priority " priority"
This specifies smallest (highest) rule priority used with source-specific
routes. The default is 100.
.TP
.BI "key id" " id" " type" " type" " value" " value"
Configure a key for use with the
.B hmac
interface option. The
.B type
is one of
.B hmac-sha256
or
.BR blake2s .
The
.B value
is a hexadecimal string (up to 64 bytes for
.BR hmac-sha256 ,
exactly 16 bytes for
.BR blake2s ).
.SS Interface configuration
An interface is configured by a line with the following format:
.IP
......@@ -414,11 +430,6 @@ otherwise.
Send multiple copies of TLVs other than Hellos to all neighbours rather
than sending a single multicast packet. The default is false.
.TP
.BR no_hmac_verify " {" true | false }
Do not check packet signatures, accept unsigned or incorrectly signed packets
even if one or more keys are configured on the interface. The default is
.BR false .
.TP
.BR rfc6126\-compatible " {" true | false }
Disable some features that are incompatible with RFC 6126 (the older
version of the Babel protocol), such as source-specific routing and RTT
......@@ -457,6 +468,16 @@ if the interface is of type
and
.BR 0
otherwise.
.TP
.BI hmac " id"
Enable HMAC security on this interface, and use the key
.IR id .
.TP
.BR no_hmac_verify " {" true | false }
Do not check packet signatures, accept unsigned or incorrectly signed packets
even if one or more keys are configured on the interface. The default is
.BR false .
.TP
.SS Filtering rules
A filtering rule is defined by a single line with the following format:
.IP
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment