Skip to content

dream
dream
Commit 8e2a5c8e authored by Ioannis Papagiannopoulos's avatar Ioannis Papagiannopoulos
Browse files
Options

Machine, if no router is initiated then the pendingEntities list is not... 

Machine, if no router is initiated then the pendingEntities list is not populated by endProcessingActions(). getActiveObject() used less to speed up
parent 78398fa9
Show whitespace changes
Inline Side-by-side
Showing with 83 additions and 99 deletions
dream/simulation/Machine.py
View file @ 8e2a5c8e
......@@ -228,12 +228,12 @@ class Machine(CoreObject):
while 1:
# waitEvent isRequested /interruptionEnd/loadOperatorAvailable
while 1:
self.printTrace(self.id, waitEvent='')
# self.printTrace(self.id, waitEvent='')
yield waitevent, self, [self.isRequested, self.interruptionEnd, self.loadOperatorAvailable]
self.printTrace(self.id, received='')
# self.printTrace(self.id, received='')
# if the machine can accept an entity and one predecessor requests it continue with receiving the entity
if self.isRequested.signalparam:
self.printTrace(self.id, isRequested=self.isRequested.signalparam.id)
# self.printTrace(self.id, isRequested=self.isRequested.signalparam.id)
assert self.isRequested.signalparam==self.giver, 'the giver is not the requestingObject'
assert self.giver.receiver==self, 'the receiver of the signalling object in not the station'
# reset the signalparam of the isRequested event
......@@ -242,10 +242,10 @@ class Machine(CoreObject):
# if an interruption caused the control to be taken by the machine or
# if an operator was rendered available while it was needed by the machine to proceed with getEntity
if self.interruptionEnd.signalparam==now() or self.loadOperatorAvailable.signalparam==now():
if self.interruptionEnd.signalparam==now():
self.printTrace(self.id, interruptionEnd=str(self.interruptionEnd.signalparam))
elif self.loadOperatorAvailable.signalparam==now():
self.printTrace(self.id,loadOperatorAvailable=str(self.loadOperatorAvailable.signalparam))
# if self.interruptionEnd.signalparam==now():
# self.printTrace(self.id, interruptionEnd=str(self.interruptionEnd.signalparam))
# elif self.loadOperatorAvailable.signalparam==now():
# self.printTrace(self.id,loadOperatorAvailable=str(self.loadOperatorAvailable.signalparam))
# try to signal the Giver, otherwise wait until it is requested
if self.signalGiver():
break
......@@ -467,16 +467,15 @@ class Machine(CoreObject):
# actions to be carried out when the processing of an Entity ends
# =======================================================================
def endProcessingActions(self):
activeObject=self.getActiveObject()
activeObjectQueue=activeObject.getActiveObjectQueue()
activeObjectQueue=self.Res.activeQ
activeEntity=activeObjectQueue[0]
self.printTrace(activeObject.getActiveObjectQueue()[0].name, processEnd=activeObject.objName)
# self.printTrace(activeObject.getActiveObjectQueue()[0].name, processEnd=activeObject.objName)
# reset the variables used to handle the interruptions timing
self.timeRestartingProcessing=0
self.breakTime=0
# output to trace that the processing in the Machine self.objName ended
try:
activeObject.outputTrace(activeObject.getActiveObjectQueue()[0].name,"ended processing in "+activeObject.objName)
self.outputTrace(activeObjectQueue[0].name,"ended processing in "+self.objName)
except IndexError:
pass
# TODO: Not only Machines require time to process entities
......@@ -484,32 +483,33 @@ class Machine(CoreObject):
if activeEntity.family=='Entity':
successorsAreMachines=True
from Globals import G
for object in activeObject.next:
for object in self.next:
if not object in G.MachineList:
successorsAreMachines=False
break
if not successorsAreMachines:
activeObjectQueue[0].hot = False
from Globals import G
if G.Router:
# the just processed entity is added to the list of entities
# pending for the next processing
G.pendingEntities.append(activeObjectQueue[0])
# set the variable that flags an Entity is ready to be disposed
activeObject.waitToDispose=True
self.waitToDispose=True
#do this so that if it is overtime working it is not counted as off-shift time
if not activeObject.onShift:
activeObject.timeLastShiftEnded=now()
if not self.onShift:
self.timeLastShiftEnded=now()
# update the total working time
# the total processing time for this entity is what the distribution initially gave
if not self.shouldPreempt:
activeObject.totalWorkingTime+=activeObject.totalProcessingTimeInCurrentEntity
self.totalWorkingTime+=self.totalProcessingTimeInCurrentEntity
# if the station was preemptied for a critical order then calculate the total working time accorindingly
else:
activeObject.totalWorkingTime+=now()-(self.timeLastEntityEntered)
self.totalWorkingTime+=now()-(self.timeLastEntityEntered)
# update the variables keeping track of Entity related attributes of the machine
activeObject.timeLastEntityEnded=now() # this holds the time that the last entity ended processing in Machine
activeObject.nameLastEntityEnded=activeObject.currentEntity.name # this holds the name of the last entity that ended processing in Machine
activeObject.completedJobs+=1 # Machine completed one more Job
self.timeLastEntityEnded=now() # this holds the time that the last entity ended processing in Machine
self.nameLastEntityEnded=self.currentEntity.name # this holds the name of the last entity that ended processing in Machine
self.completedJobs+=1 # Machine completed one more Job
# reseting the shouldPreempt flag
self.shouldPreempt=False
......@@ -517,15 +517,14 @@ class Machine(CoreObject):
# actions to be carried out when the processing of an Entity ends
# =======================================================================
def interruptionActions(self):
activeObject=self.getActiveObject()
activeObjectQueue=activeObject.getActiveObjectQueue()
activeObjectQueue=self.Res.activeQ
activeEntity=activeObjectQueue[0]
self.printTrace(self.getActiveObjectQueue()[0].name, interrupted=self.objName)
# self.printTrace(activeEntity.name, interrupted=self.objName)
# if the interrupt occured while processing an entity
if not activeObject.waitToDispose:
if not self.waitToDispose:
# output to trace that the Machine (self.objName) got interrupted
try:
self.outputTrace(self.getActiveObjectQueue()[0].name, "Interrupted at "+self.objName)
self.outputTrace(activeObjectQueue[0].name, "Interrupted at "+self.objName)
except IndexError:
pass
# recalculate the processing time left tinM
......@@ -542,18 +541,17 @@ class Machine(CoreObject):
# actions to be carried out when the processing of an Entity ends
# =======================================================================
def postInterruptionActions(self):
activeObject=self.getActiveObject()
activeObjectQueue=activeObject.getActiveObjectQueue()
activeObjectQueue=self.Res.activeQ
activeEntity=activeObjectQueue[0]
# if the machine returns from an failure while processing an entity
if not activeObject.waitToDispose:
if not self.waitToDispose:
# use the timers to count the time that Machine is down and related
self.downTimeProcessingCurrentEntity+=now()-self.breakTime # count the time that Machine is down while processing this Entity
self.downTimeInCurrentEntity+=now()-self.breakTime # count the time that Machine is down while on currentEntity
self.timeLastFailureEnded=now() # set the timeLastFailureEnded
self.failureTimeInCurrentEntity+=now()-self.breakTime # dummy variable keeping track of the failure time
# output to trace that the Machine self.objName was passivated for the current failure time
self.outputTrace(self.getActiveObjectQueue()[0].name, "passivated in "+self.objName+" for "+str(now()-self.breakTime))
self.outputTrace(activeObjectQueue[0].name, "passivated in "+self.objName+" for "+str(now()-self.breakTime))
# when a machine returns from failure while trying to deliver an entity
else:
# count the failure while on current entity time with failureTime variable
......@@ -579,41 +577,37 @@ class Machine(CoreObject):
# that will give the entity.
# =======================================================================
def canAccept(self, callerObject=None):
# get active and giver objects
activeObject=self.getActiveObject()
activeObjectQueue=self.getActiveObjectQueue()
activeObjectQueue=self.Res.activeQ
# if we have only one predecessor just check if there is a place and the machine is up
# this is done to achieve better (cpu) processing time
# then we can also use it as a filter for a yield method
if(callerObject==None):
if (activeObject.operatorPool!='None' and (any(type=='Load' for type in activeObject.multOperationTypeList)\
or any(type=='Setup' for type in activeObject.multOperationTypeList))):
return activeObject.operatorPool.checkIfResourceIsAvailable()\
and activeObject.checkIfMachineIsUp()\
and len(activeObjectQueue)<activeObject.capacity\
and not activeObject.entryIsAssignedTo()
if (self.operatorPool!='None' and (any(type=='Load' for type in self.multOperationTypeList)\
or any(type=='Setup' for type in self.multOperationTypeList))):
return self.operatorPool.checkIfResourceIsAvailable()\
and self.checkIfMachineIsUp()\
and len(activeObjectQueue)<self.capacity\
and not self.entryIsAssignedTo()
else:
return activeObject.checkIfMachineIsUp()\
and len(activeObjectQueue)<activeObject.capacity\
and not activeObject.entryIsAssignedTo()
return self.checkIfMachineIsUp()\
and len(activeObjectQueue)<self.capacity\
and not self.entryIsAssignedTo()
thecaller=callerObject
# return True ONLY if the length of the activeOjbectQue is smaller than
# the object capacity, and the callerObject is not None but the giverObject
if (activeObject.operatorPool!='None' and (any(type=='Load' for type in activeObject.multOperationTypeList)\
or any(type=='Setup' for type in activeObject.multOperationTypeList))):
return activeObject.operatorPool.checkIfResourceIsAvailable()\
and activeObject.checkIfMachineIsUp()\
and len(activeObjectQueue)<activeObject.capacity\
and not activeObject.entryIsAssignedTo()
if (self.operatorPool!='None' and (any(type=='Load' for type in self.multOperationTypeList)\
or any(type=='Setup' for type in self.multOperationTypeList))):
return self.operatorPool.checkIfResourceIsAvailable()\
and self.checkIfMachineIsUp()\
and len(activeObjectQueue)<self.capacity\
and not self.entryIsAssignedTo()
else:
# the operator doesn't have to be present for the loading of the machine as the load operation
# is not assigned to operators
return activeObject.checkIfMachineIsUp()\
and len(activeObjectQueue)<activeObject.capacity\
and (thecaller in activeObject.previous)\
and not activeObject.entryIsAssignedTo()
return self.checkIfMachineIsUp()\
and len(activeObjectQueue)<self.capacity\
and (thecaller in self.previous)\
and not self.entryIsAssignedTo()
# =======================================================================
# checks if the Machine can accept an entity and there is an entity in
......@@ -621,22 +615,19 @@ class Machine(CoreObject):
# also updates the giver to the one that is to be taken
# =======================================================================
def canAcceptAndIsRequested(self,callerObject=None):
# get active and giver objects
activeObject=self.getActiveObject()
activeObjectQueue=self.getActiveObjectQueue()
# giverObject=self.getGiverObject()
activeObjectQueue=self.Res.activeQ
giverObject=callerObject
assert giverObject, 'there must be a caller for canAcceptAndIsRequested'
# check if there is a place, the machine is up and the predecessor has an entity to dispose. if the machine has to compete
# for an Operator that loads the entities onto it check if the predecessor if blocked by an other Machine. if not then the machine
# has to block the predecessor giverObject to avoid conflicts with other competing machines
if (activeObject.operatorPool!='None' and (any(type=='Load' for type in activeObject.multOperationTypeList))):
if giverObject.haveToDispose(activeObject):
if activeObject.checkOperator()\
and activeObject.checkIfActive() and len(activeObjectQueue)<activeObject.capacity:
if (self.operatorPool!='None' and (any(type=='Load' for type in self.multOperationTypeList))):
if giverObject.haveToDispose(self):
if self.checkOperator()\
and self.checkIfActive() and len(activeObjectQueue)<self.capacity:
if not giverObject.exitIsAssignedTo():
giverObject.assignExitTo(activeObject)
elif giverObject.exitIsAssignedTo()!=activeObject:
giverObject.assignExitTo(self)
elif giverObject.exitIsAssignedTo()!=self:
return False
return True
else:
......@@ -645,11 +636,11 @@ class Machine(CoreObject):
# the operator performs no load and the entity is received by the machine while there is
# no need for operators presence. The operator needs to be present only where the load Type
# operation is assigned
if activeObject.checkIfActive() and len(activeObjectQueue)<activeObject.capacity\
and giverObject.haveToDispose(activeObject):
if self.checkIfActive() and len(activeObjectQueue)<self.capacity\
and giverObject.haveToDispose(self):
if not giverObject.exitIsAssignedTo():
giverObject.assignExitTo(activeObject)
elif giverObject.exitIsAssignedTo()!=activeObject:
giverObject.assignExitTo(self)
elif giverObject.exitIsAssignedTo()!=self:
return False
return True
......@@ -657,27 +648,25 @@ class Machine(CoreObject):
# return whether Load or setup Requested
#===========================================================================
def isLoadRequested(self):
activeObject=self.getActiveObject()
return any(type=='Load' or type=='Setup' for type in activeObject.multOperationTypeList)
return any(type=='Load' or type=='Setup' for type in self.multOperationTypeList)
# =======================================================================
# to be called by canAcceptAndIsRequested and check for the operator
# =======================================================================
def checkOperator(self,callerObject=None):
activeObject=self.getActiveObject()
mayProceed=False
if activeObject.operatorPool.operators:
if self.operatorPool.operators:
# flag notifying that there is operator assigned to the actievObject
self.assignedOperator=False
# the operators operating the station
operators=activeObject.operatorPool.operators
if activeObject.operatorPool.checkIfResourceIsAvailable():
operators=self.operatorPool.operators
if self.operatorPool.checkIfResourceIsAvailable():
for operator in [x for x in operators if x.checkIfResourceIsAvailable()]:
# if there are operators available not assigned to the station then the station may proceed signalling the Router
if not operator.isAssignedTo():
mayProceed=True
# if there are operators assigned to the station then proceed without invoking the Router
elif operator.isAssignedTo()==activeObject:
elif operator.isAssignedTo()==self:
self.assignedOperator=True
break
return mayProceed or self.assignedOperator
......@@ -688,10 +677,10 @@ class Machine(CoreObject):
# get an entity from the giver
# =======================================================================
def getEntity(self):
activeObject=self.getActiveObject()
activeEntity=CoreObject.getEntity(self) # run the default method
# after the machine receives an entity, it must be removed from the pendingEntities list
from Globals import G
if G.Router:
if activeEntity in G.pendingEntities:
G.pendingEntities.remove(activeEntity)
return activeEntity
......@@ -700,29 +689,26 @@ class Machine(CoreObject):
# removes an entity from the Machine
# =======================================================================
def removeEntity(self, entity=None):
activeObject=self.getActiveObject()
activeEntity=CoreObject.removeEntity(self, entity) # run the default method
activeObject.waitToDispose=False # update the waitToDispose flag
self.waitToDispose=False # update the waitToDispose flag
# if the Machine canAccept then signal a giver
if activeObject.canAccept():
self.printTrace(self.id, attemptSignalGiver='(removeEntity)')
activeObject.signalGiver()
if self.canAccept():
# self.printTrace(self.id, attemptSignalGiver='(removeEntity)')
self.signalGiver()
return activeEntity
# =======================================================================
# checks if the Machine can dispose an entity to the following object
# =======================================================================
def haveToDispose(self, callerObject=None):
# get active and the receiver object
activeObject=self.getActiveObject()
activeObjectQueue=self.getActiveObjectQueue()
activeObjectQueue=self.Res.activeQ
#if we have only one successor just check if machine waits to dispose and also is up
# this is done to achieve better (cpu) processing time
if(len(activeObject.next)==1 or callerObject==None):
return len(activeObjectQueue)>0 and activeObject.waitToDispose and activeObject.checkIfActive()
if(len(self.next)==1 or callerObject==None):
return len(activeObjectQueue)>0 and self.waitToDispose and self.checkIfActive()
thecaller=callerObject
return len(activeObjectQueue)>0 and activeObject.waitToDispose\
and activeObject.checkIfActive() and (thecaller in activeObject.next)
return len(activeObjectQueue)>0 and self.waitToDispose\
and self.checkIfActive() and (thecaller in self.next)
# =======================================================================
# calculates the setup time
......@@ -741,28 +727,26 @@ class Machine(CoreObject):
# find candidate operators within the free operators
#===========================================================================
def findCandidateOperator(self):
activeObject=self.getActiveObject()
# TODO: this way no sorting is performed
# find an available operator
candidateOperator=activeObject.operatorPool.findAvailableOperator()
candidateOperator=self.operatorPool.findAvailableOperator()
# append the station into its candidateStations
candidateOperator.candidateStations.append(activeObject)
candidateOperator.candidateStations.append(self)
return candidateOperator
#===========================================================================
# checks whether the entity can proceed to a successor object
#===========================================================================
def canDeliver(self, entity=None):
activeObject=self.getActiveObject()
assert activeObject.isInActiveQueue(entity), entity.id +' not in the internalQueue of'+ activeObject.id
assert self.isInActiveQueue(entity), entity.id +' not in the internalQueue of'+ self.id
activeEntity=entity
from Globals import G
router = G.Router
# if the entity is in a machines who's broker waits for operator then
if activeObject in router.pendingMachines:
if self in router.pendingMachines:
activeEntity.proceed=True
activeEntity.candidateReceivers.append(activeObject)
activeEntity.candidateReceivers.append(self)
return True
return False
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7