Automatic merge of gitlab-org/gitlab-ce master

doc/administration/container_registry.md

 # GitLab Container Registry administration
 
 > **Notes:**
+>
 > - [Introduced][ce-4040] in GitLab 8.8.
 > - Container Registry manifest `v1` support was added in GitLab 8.9 to support
 >   Docker versions earlier than 1.10.

doc/administration/high_availability/redis.md

@@ -111,6 +111,7 @@ a hosted cloud solution or you can use the one that comes bundled with
 Omnibus GitLab packages.
 
 > **Notes:**
+>
 > - Redis requires authentication for High Availability. See
 >  [Redis Security](https://redis.io/topics/security) documentation for more
 >  information. We recommend using a combination of a Redis password and tight
@@ -150,6 +151,7 @@ Make sure that you read this document once as a whole before configuring the
 components below.
 
 > **Notes:**
+>
 > - Starting with GitLab `8.11`, you can configure a list of Redis Sentinel
 >   servers that will monitor a group of Redis servers to provide failover support.
 > - Starting with GitLab `8.14`, the Omnibus GitLab Enterprise Edition package
@@ -326,6 +328,7 @@ Pick the one that suits your needs.
 This is the section where we install and set up the new Redis instances.
 
 > **Notes:**
+>
 > - We assume that you have installed GitLab and all HA components from scratch. If you
 >   already have it installed and running, read how to
 >   [switch from a single-machine installation to Redis HA](#switching-from-an-existing-single-machine-installation-to-redis-ha).

doc/administration/job_artifacts.md

 # Jobs artifacts administration
 
 > **Notes:**
+>
 > - Introduced in GitLab 8.2 and GitLab Runner 0.7.0.
 > - Starting with GitLab 8.4 and GitLab Runner 1.0, the artifacts archive format changed to `ZIP`.
 > - Starting with GitLab 8.17, builds are renamed to jobs.
@@ -86,6 +87,7 @@ _The artifacts are stored by default in
 ### Using object storage
 
 > **Notes:**
+>
 > - [Introduced](https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/1762) in
 >   [GitLab Premium](https://about.gitlab.com/pricing/) 9.4.
 > - Since version 9.5, artifacts are [browsable](../user/project/pipelines/job_artifacts.md#browsing-artifacts),

doc/administration/monitoring/prometheus/index.md

 # Monitoring GitLab with Prometheus
 
 > **Notes:**
+>
 > - Prometheus and the various exporters listed in this page are bundled in the
 >   Omnibus GitLab package. Check each exporter's documentation for the timeline
 >   they got added. For installations from source you will have to install them

doc/administration/pages/index.md

@@ -5,6 +5,7 @@ description: 'Learn how to administer GitLab Pages.'
 # GitLab Pages administration
 
 > **Notes:**
+>
 > - [Introduced][ee-80] in GitLab EE 8.3.
 > - Custom CNAMEs with TLS support were [introduced][ee-173] in GitLab EE 8.5.
 > - GitLab Pages [were ported][ce-14605] to Community Edition in GitLab 8.17.

doc/api/group_milestones.md

 # Group milestones API
 
-> **Notes:**
 > [Introduced][ce-12819] in GitLab 9.5.
 
 ## List group milestones

doc/api/project_snippets.md

@@ -121,7 +121,6 @@ Parameters:
 
 ## Get user agent details
 
-> **Notes:**
 > [Introduced][ce-29508] in GitLab 9.4.
 
 Available only for admins.

doc/api/services.md

@@ -505,10 +505,9 @@ GET /projects/:id/services/jira
 
 Set JIRA service for a project.
 
-> **Notes:**
-> - Starting with GitLab 8.14, `api_url`, `issues_url`, `new_issue_url` and
->   `project_url` are replaced by `project_key`, `url`. If you are using an
->   older version, [follow this documentation][old-jira-api].
+> Starting with GitLab 8.14, `api_url`, `issues_url`, `new_issue_url` and
+> `project_url` are replaced by `project_key`, `url`. If you are using an
+> older version, [follow this documentation][old-jira-api].
 
 ```
 PUT /projects/:id/services/jira

doc/ci/chatops/README.md

@@ -2,9 +2,9 @@
 
 > **Notes:**
 >
-> * [Introduced](https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/4466) in [GitLab Ultimate](https://about.gitlab.com/pricing/) 10.6. [Moved](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/24780) to [GitLab Core](https://about.gitlab.com/pricing/) in 11.9.
+> - [Introduced](https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/4466) in [GitLab Ultimate](https://about.gitlab.com/pricing/) 10.6. [Moved](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/24780) to [GitLab Core](https://about.gitlab.com/pricing/) in 11.9.
 >
-> * ChatOps is currently in alpha, with some important features missing like access control.
+> - ChatOps is currently in alpha, with some important features missing like access control.
 
 GitLab ChatOps provides a method to interact with CI/CD jobs through chat services like Slack. Many organizations' discussion, collaboration, and troubleshooting is taking place in chat services these days, and having a method to run CI/CD jobs with output posted back to the channel can significantly augment a team's workflow.
 

doc/ci/docker/using_docker_build.md

@@ -389,6 +389,7 @@ If you're running multiple Runners you will have to modify all configuration fil
 ## Using the GitLab Container Registry
 
 > **Notes:**
+>
 > - This feature requires GitLab 8.8 and GitLab Runner 1.2.
 > - Starting from GitLab 8.12, if you have [2FA] enabled in your account, you need
 >   to pass a [personal access token][pat] instead of your password in order to

doc/user/discussions/index.md

@@ -20,13 +20,14 @@ comment at any time, and anyone with [Maintainer access level][permissions] or
 higher can also edit a comment made by someone else.
 
 You can also reply to a comment notification email to reply to the comment if
-[Reply by email] is configured for your GitLab instance. Replying to a standard comment 
+[Reply by email] is configured for your GitLab instance. Replying to a standard comment
 creates another standard comment. Replying to a discussion comment creates a reply in the
 discussion thread. Email replies support [Markdown] and [quick actions], just as if you replied from the web.
 
 ## Resolvable comments and discussions
 
 > **Notes:**
+>
 > - The main feature was [introduced][ce-5022] in GitLab 8.11.
 > - Resolvable discussions can be added only to merge request diffs.
 
@@ -427,7 +428,7 @@ Clicking on the **Reply to comment** button will bring the reply area into focus
 
 ![Reply to comment feature](img/reply_to_comment.gif)
 
-Relying to a non-discussion comment will convert the non-discussion comment to a 
+Relying to a non-discussion comment will convert the non-discussion comment to a
 threaded discussion once the reply is submitted. This conversion is considered an edit
 to the original comment, so a note about when it was last edited will appear underneath it.
 

doc/user/group/index.md

@@ -65,9 +65,8 @@ together in a single list view.
 
 ## Create a new group
 
-> **Notes:**
-> - For a list of words that are not allowed to be used as group names see the
->   [reserved names](../reserved_names.md).
+> For a list of words that are not allowed to be used as group names see the
+> [reserved names](../reserved_names.md).
 
 You can create a group in GitLab from:
 

doc/user/profile/account/two_factor_authentication.md

@@ -59,6 +59,7 @@ of recovery codes.
 ### Enable 2FA via U2F device
 
 > **Notes:**
+>
 > - GitLab officially only supports [Yubikey] U2F devices.
 > - Support for U2F devices was added in GitLab 8.8.
 

doc/user/project/bulk_editing.md

 # Bulk editing issues and merge requests
 
 > **Notes:**
+>
 > - A permission level of `Reporter` or higher is required in order to manage
 >   issues.
 > - A permission level of `Developer` or higher is required in order to manage

doc/user/project/container_registry.md

 # GitLab Container Registry
 
 > **Notes:**
-> [Introduced][ce-4040] in GitLab 8.8.
+>
+> - [Introduced][ce-4040] in GitLab 8.8.
 > - Docker Registry manifest `v1` support was added in GitLab 8.9 to support Docker
 >   versions earlier than 1.10.
 > - This document is about the user guide. To learn how to enable GitLab Container
@@ -10,7 +11,7 @@
 > - Starting from GitLab 8.12, if you have 2FA enabled in your account, you need
 >   to pass a [personal access token][pat] instead of your password in order to
 >   login to GitLab's Container Registry.
-> - Multiple level image names support was added in GitLab 9.1
+> - Multiple level image names support was added in GitLab 9.1.
 
 With the Docker Container Registry integrated into GitLab, every project can
 have its own space to store its Docker images.
@@ -41,6 +42,7 @@ to enable it.
 ## Build and push images
 
 > **Notes:**
+>
 > - Moving or renaming existing container registry repositories is not supported
 >   once you have pushed images because the images are signed, and the
 >   signature includes the repository name.

doc/user/project/integrations/jira.md

@@ -56,6 +56,7 @@ When connecting to **JIRA Cloud**, which supports authentication via API token,
 ### Configuring GitLab
 
 > **Notes:**
+>
 > - The currently supported Jira versions are `v6.x` and `v7.x.`. GitLab 7.8 or
 >   higher is required.
 > - GitLab 8.14 introduced a new way to integrate with Jira which greatly simplified
@@ -142,6 +143,7 @@ the same goal:
 where `PROJECT-1` is the issue ID of the Jira project.
 
 > **Notes:**
+>
 > - Only commits and merges into the project's default branch (usually **master**) will
 >   close an issue in Jira. You can change your projects default branch under
 >   [project settings](img/jira_project_settings.png).

doc/user/project/merge_requests/versions.md

 # Merge requests versions
 
 > **Notes:**
+>
 > - [Introduced][ce-5467] in GitLab 8.12.
 > - Comments are disabled while viewing outdated merge versions or comparing to
 >   versions other than base.

doc/user/project/new_ci_build_permissions_model.md

@@ -205,6 +205,7 @@ With the update permission model we also extended the support for accessing
 Container Registries for private projects.
 
 > **Notes:**
+>
 > - GitLab Runner versions prior to 1.8 don't incorporate the introduced changes
 >   for permissions. This makes the `image:` directive to not work with private
 >   projects automatically and it needs to be configured manually on Runner's host

doc/user/project/pages/introduction.md

 # Exploring GitLab Pages
 
 > **Notes:**
+>
 > - This feature was [introduced][ee-80] in GitLab EE 8.3.
 > - Custom CNAMEs with TLS support were [introduced][ee-173] in GitLab EE 8.5.
 > - GitLab Pages [was ported][ce-14605] to Community Edition in GitLab 8.17.

doc/user/project/pipelines/job_artifacts.md

 # Introduction to job artifacts
 
 > **Notes:**
+>
 > - Since GitLab 8.2 and GitLab Runner 0.7.0, job artifacts that are created by
 >   GitLab Runner are uploaded to GitLab and are downloadable as a single archive
 >   (`tar.gz`) using the GitLab UI.
@@ -152,7 +153,7 @@ For example:
 https://gitlab.com/gitlab-org/gitlab-ce/-/jobs/artifacts/master/browse?job=coverage
 ```
 
-There is also a URL to specific files, including html files that 
+There is also a URL to specific files, including html files that
 are shown in [GitLab Pages](../../../administration/pages/index.md):
 
 ```
@@ -191,9 +192,9 @@ artifacts and the job's trace.
 1. Click the trash icon at the top right of the job's trace.
 1. Confirm the deletion.
 
-## Retrieve artifacts of private projects when using GitLab CI 
+## Retrieve artifacts of private projects when using GitLab CI
 
 In order to retrieve a job artifact of a different project, you might need to use a private token in order to [authenticate and download](../../../api/jobs.md#get-job-artifacts) the artifacts.
 
 [expiry date]: ../../../ci/yaml/README.md#artifactsexpire_in
-[ce-14399]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/14399
+[ce-14399]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/14399
\ No newline at end of file

doc/user/project/pipelines/schedules.md

 # Pipeline schedules
 
 > **Notes**:
+>
 > - This feature was introduced in 9.1 as [Trigger Schedule][ce-10533].
 > - In 9.2, the feature was [renamed to Pipeline Schedule][ce-10853].
 > - Cron notation is parsed by [Fugit](https://github.com/floraison/fugit).