Resolve "Geo: Improve no downtime upgrade documentation"

.gitlab-ci.yml

@@ -715,6 +715,8 @@ docs lint:
   <<: *except-qa
   image: "registry.gitlab.com/gitlab-org/gitlab-build-images:nanoc-bootstrap-ruby-2.4-alpine"
   stage: test
+  variables:
+    SETUP_DB: "false"
   cache: {}
   dependencies: []
   before_script: []

doc/administration/geo/replication/updating_the_geo_nodes.md

@@ -20,7 +20,7 @@ Before 10.8, broadcast messages would not propagate without flushing the cache o
 This has been fixed in 10.8, but requires one last cache flush on each secondary node:
 
 ```bash
-gitlab-rake cache:clear
+sudo gitlab-rake cache:clear
 ```
 
 ## Upgrading to GitLab 10.6
@@ -59,8 +59,8 @@ authentication method.
 1. **[primary]** Reconfigure and restart
 
     ```bash
-    gitlab-ctl reconfigure
-    gitlab-ctl restart
+    sudo gitlab-ctl reconfigure
+    sudo gitlab-ctl restart
     ```
 
 1. **[secondary]** Login to all secondary nodes and edit `/etc/gitlab/gitlab.rb`:
@@ -89,8 +89,8 @@ authentication method.
 1. **[secondary]** Reconfigure and restart
 
     ```bash
-    gitlab-ctl reconfigure
-    gitlab-ctl restart
+    sudo gitlab-ctl reconfigure
+    sudo gitlab-ctl restart
     ```
 
 ## Upgrading to GitLab 10.5
@@ -206,7 +206,7 @@ following to clean this up.
 
 On the SECONDARY Geo nodes, run as root:
 
-```sh
+```bash
 mv /var/opt/gitlab/gitlab-rails/working /var/opt/gitlab/gitlab-rails/working.old
 mkdir /var/opt/gitlab/gitlab-rails/working
 chmod 700 /var/opt/gitlab/gitlab-rails/working
@@ -218,7 +218,7 @@ You may delete `/var/opt/gitlab/gitlab-rails/working.old` any time.
 Once this is done, we advise restarting GitLab on the secondary nodes for the
 new working directory to be used:
 
-```
+```bash
 sudo gitlab-ctl restart
 ```
 
@@ -267,7 +267,7 @@ is prepended with the relevant node for better clarity:
 1. **[secondary]** Make a backup of the `recovery.conf` file on **all**
    secondary nodes to preserve PostgreSQL's credentials:
 
-    ```
+    ```bash
     sudo cp /var/opt/gitlab/postgresql/data/recovery.conf /var/opt/gitlab/
     ```
 
@@ -279,7 +279,7 @@ is prepended with the relevant node for better clarity:
    stop all services except `postgresql` as we will use it to re-initialize the
    secondary node's database:
 
-    ```
+    ```bash
     sudo gitlab-ctl stop
     sudo gitlab-ctl start postgresql
     ```
@@ -288,19 +288,19 @@ is prepended with the relevant node for better clarity:
 
     1. **[secondary]**  Stop all services:
 
-        ```
+        ```bash
         sudo gitlab-ctl stop
         ```
 
     1. **[secondary]** Prevent running database migrations:
 
-        ```
+        ```bash
         sudo touch /etc/gitlab/skip-auto-migrations
         ```
 
     1. **[secondary]** Move the old database to another directory:
 
-        ```
+        ```bash
         sudo mv /var/opt/gitlab/postgresql{,.bak}
         ```
 
@@ -309,26 +309,26 @@ is prepended with the relevant node for better clarity:
 
     1. **[secondary]** Make sure all services are up:
 
-        ```
+        ```bash
         sudo gitlab-ctl start
         ```
 
     1. **[secondary]** Reconfigure GitLab:
 
-        ```
+        ```bash
         sudo gitlab-ctl reconfigure
         ```
 
     1. **[secondary]** Run the PostgreSQL upgrade command:
 
-          ```
-          sudo gitlab-ctl pg-upgrade
-          ```
+        ```bash
+        sudo gitlab-ctl pg-upgrade
+        ```
 
     1. **[secondary]** See the stored credentials for the database that you will
        need to re-initialize the replication:
 
-        ```
+        ```bash
         sudo grep -s primary_conninfo /var/opt/gitlab/recovery.conf
         ```
 
@@ -338,19 +338,19 @@ is prepended with the relevant node for better clarity:
     1. **[secondary]** Run the recovery script using the credentials from the
        previous step:
 
-        ```
+        ```bash
         sudo bash /tmp/replica.sh
         ```
 
     1. **[secondary]** Reconfigure GitLab:
 
-        ```
+        ```bash
         sudo gitlab-ctl reconfigure
         ```
 
     1. **[secondary]** Start all services:
 
-        ```
+        ```bash
         sudo gitlab-ctl start
         ```
 
@@ -359,7 +359,7 @@ is prepended with the relevant node for better clarity:
 1. **[primary]** After all secondaries are updated, start all services in
    primary:
 
-    ```
+    ```bash
     sudo gitlab-ctl start
     ```
 
@@ -370,7 +370,7 @@ everything is working correctly:
 
 1. Run the Geo raketask on all nodes, everything should be green:
 
-    ```
+    ```bash
     sudo gitlab-rake gitlab:geo:check
     ```
 
@@ -386,7 +386,7 @@ and it is required since 10.0.
 
 1. Run database migrations on tracking database
 
-    ```
+    ```bash
     sudo gitlab-rake geo:db:migrate
     ```
 

doc/update/README.md

@@ -5,15 +5,15 @@ update guides.
 
 There are currently 3 official ways to install GitLab:
 
-- Omnibus packages
-- Source installation
-- Docker installation
+- [Omnibus packages](#omnibus-packages)
+- [Source installation](#installation-from-source)
+- [Docker installation](#installation-using-docker)
 
 Based on your installation, choose a section below that fits your needs.
 
 ## Omnibus Packages
 
-- The [Omnibus update guide](http://docs.gitlab.com/omnibus/update/README.html)
+- The [Omnibus update guide][omni-update]
   contains the steps needed to update an Omnibus GitLab package.
 
 ## Installation from source
@@ -30,7 +30,7 @@ Based on your installation, choose a section below that fits your needs.
 
 GitLab provides official Docker images for both Community and Enterprise
 editions. They are based on the Omnibus package and instructions on how to
-update them are in [a separate document][omnidocker].
+update them are in [a separate document][omni-docker].
 
 ## Upgrading without downtime
 
@@ -96,6 +96,10 @@ migrations this could potentially lead to hours of downtime, depending on the
 size of your database. To work around this you will have to use PostgreSQL and
 meet the other online upgrade requirements mentioned above.
 
+### Steps
+
+Steps to [upgrade without downtime][omni-zero-downtime].
+
 ## Upgrading between editions
 
 GitLab comes in two flavors: [Community Edition][ce] which is MIT licensed,
@@ -136,10 +140,12 @@ possible.
 - [Upgrading PostgreSQL Using Slony](upgrading_postgresql_using_slony.md), for
   upgrading a PostgreSQL database with minimal downtime.
 
-[omnidocker]: http://docs.gitlab.com/omnibus/docker/README.html
 [source-ee]: https://gitlab.com/gitlab-org/gitlab-ee/tree/master/doc/update
 [source-ce]: https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update
 [ee-ce]: ../downgrade_ee_to_ce/README.md
 [ce]: https://about.gitlab.com/features/#community
 [ee]: https://about.gitlab.com/features/#enterprise
-[omni-ce-ee]: http://docs.gitlab.com/omnibus/update/README.html#from-community-edition-to-enterprise-edition
+[omni-ce-ee]: https://docs.gitlab.com/omnibus/update/README.html#updating-community-edition-to-enterprise-edition
+[omni-docker]: https://docs.gitlab.com/omnibus/docker/README.html
+[omni-update]: https://docs.gitlab.com/omnibus/update/README.html
+[omni-zero-downtime]: https://docs.gitlab.com/omnibus/update/README.html#zero-downtime-updates