Commit b3ac9668 authored by Marcia Ramos's avatar Marcia Ramos

Merge branch 'docs/change-gitlab-ce-gitlab-ee' into 'master'

Find all occurrences of gitlab-ce/gitlab-ee in docs

Closes #32224

See merge request gitlab-org/gitlab!17103
parents d4159288 78c5de7e
......@@ -25,7 +25,7 @@ Any change that requires access to the **Admin Area** needs to be done in the
GitLab stores a number of secret values in the `/etc/gitlab/gitlab-secrets.json`
file which *must* be the same on all nodes. Until there is
a means of automatically replicating these between nodes (see issue [gitlab-org/gitlab-ee#3789]),
a means of automatically replicating these between nodes (see issue [gitlab-org/gitlab#3789]),
they must be manually replicated to the **secondary** node.
1. SSH into the **primary** node, and execute the command below:
......@@ -299,7 +299,7 @@ See the [troubleshooting document](troubleshooting.md).
[setup-geo-omnibus]: index.md#using-omnibus-gitlab
[Hashed Storage]: ../../repository_storage_types.md
[Disaster Recovery]: ../disaster_recovery/index.md
[gitlab-org/gitlab-ee#3789]: https://gitlab.com/gitlab-org/gitlab/issues/3789
[gitlab-org/gitlab#3789]: https://gitlab.com/gitlab-org/gitlab/issues/3789
[gitlab-com/infrastructure#2821]: https://gitlab.com/gitlab-com/infrastructure/issues/2821
[omnibus-ssl]: https://docs.gitlab.com/omnibus/settings/ssl.html
[using-geo]: using_a_geo_server.md
......@@ -165,7 +165,7 @@ contention due to certain workloads.
#### Reference Architecture
- **Supported Users (approximate):** 10,000
- **Known Issues:** While validating the reference architecture, slow endpoints were discovered and are being investigated. [gitlab-org/gitlab-ce/issues/64335](https://gitlab.com/gitlab-org/gitlab-foss/issues/64335)
- **Known Issues:** While validating the reference architecture, slow endpoints were discovered and are being investigated. [gitlab-org/gitlab-foss/issues/64335](https://gitlab.com/gitlab-org/gitlab-foss/issues/64335)
The Support and Quality teams built, performance tested, and validated an
environment that supports about 10,000 users. The specifications below are a
......
......@@ -1049,7 +1049,7 @@ If you're running into an issue with a component not outlined here, be sure to c
## Configure using Omnibus
**Note**: We recommend that you follow the instructions here for a full [PostgreSQL cluster](#high-availability-with-gitlab-omnibus-premium-only).
If you are reading this section due to an old bookmark, you can find that old documentation [in the repository](https://gitlab.com/gitlab-org/gitlab-foss/blob/v10.1.4/doc/administration/high_availability/database.md#configure-using-omnibus).
If you are reading this section due to an old bookmark, you can find that old documentation [in the repository](https://gitlab.com/gitlab-org/gitlab/blob/v10.1.4/doc/administration/high_availability/database.md#configure-using-omnibus).
Read more on high-availability configuration:
......
......@@ -374,4 +374,4 @@ When in doubt, please read [Redis Sentinel documentation](https://redis.io/topic
[downloads]: https://about.gitlab.com/downloads
[restart]: ../restart_gitlab.md#installations-from-source
[it]: https://gitlab.com/gitlab-org/gitlab-foss/uploads/c4cc8cd353604bd80315f9384035ff9e/The_Internet_IT_Crowd.png
[resque]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/config/resque.yml.example
[resque]: https://gitlab.com/gitlab-org/gitlab/blob/master/config/resque.yml.example
......@@ -13,7 +13,7 @@ in the project's default branch.
In order to change the pattern you need to have access to the server that GitLab
is installed on.
The default pattern can be located in [`gitlab.yml.example`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/config/gitlab.yml.example)
The default pattern can be located in [`gitlab.yml.example`](https://gitlab.com/gitlab-org/gitlab/blob/master/config/gitlab.yml.example)
under the "Automatic issue closing" section.
> **Tip:**
......
......@@ -23,7 +23,7 @@ requests from the API are logged to a separate file in `api_json.log`.
Each line contains a JSON line that can be ingested by Elasticsearch, Splunk, etc. For example:
```json
{"method":"GET","path":"/gitlab/gitlab-ce/issues/1234","format":"html","controller":"Projects::IssuesController","action":"show","status":200,"duration":229.03,"view":174.07,"db":13.24,"time":"2017-08-08T20:15:54.821Z","params":[{"key":"param_key","value":"param_value"}],"remote_ip":"18.245.0.1","user_id":1,"username":"admin","gitaly_calls":76,"gitaly_duration":7.41,"queue_duration": 112.47}
{"method":"GET","path":"/gitlab/gitlab-foss/issues/1234","format":"html","controller":"Projects::IssuesController","action":"show","status":200,"duration":229.03,"view":174.07,"db":13.24,"time":"2017-08-08T20:15:54.821Z","params":[{"key":"param_key","value":"param_value"}],"remote_ip":"18.245.0.1","user_id":1,"username":"admin","gitaly_calls":76,"gitaly_duration":7.41,"queue_duration": 112.47}
```
In this example, you can see this was a GET request for a specific
......
......@@ -16,7 +16,7 @@ This metric tracks the total time spent (in seconds) importing a project (from
project creation until the import process finishes), for every imported project.
The name of the project is stored in the `project` label in the format
`namespace/name` (e.g. `gitlab-org/gitlab-ce`).
`namespace/name` (e.g. `gitlab-org/gitlab`).
## Number of imported projects
......@@ -54,7 +54,7 @@ projects. This metric does not expose any labels.
This metric tracks the number of imported issues across all projects.
The name of the project is stored in the `project` label in the format
`namespace/name` (e.g. `gitlab-org/gitlab-ce`).
`namespace/name` (e.g. `gitlab-org/gitlab`).
## Number of imported pull requests
......@@ -65,7 +65,7 @@ The name of the project is stored in the `project` label in the format
This metric tracks the number of imported pull requests across all projects.
The name of the project is stored in the `project` label in the format
`namespace/name` (e.g. `gitlab-org/gitlab-ce`).
`namespace/name` (e.g. `gitlab-org/gitlab`).
## Number of imported comments
......@@ -76,7 +76,7 @@ The name of the project is stored in the `project` label in the format
This metric tracks the number of imported comments across all projects.
The name of the project is stored in the `project` label in the format
`namespace/name` (e.g. `gitlab-org/gitlab-ce`).
`namespace/name` (e.g. `gitlab-org/gitlab`).
## Number of imported pull request review comments
......@@ -87,7 +87,7 @@ The name of the project is stored in the `project` label in the format
This metric tracks the number of imported comments across all projects.
The name of the project is stored in the `project` label in the format
`namespace/name` (e.g. `gitlab-org/gitlab-ce`).
`namespace/name` (e.g. `gitlab-org/gitlab`).
## Number of imported repositories
......
......@@ -37,7 +37,7 @@ If you have installed GitLab from source:
1. After the installation is complete, you will have to configure the Registry's
settings in `gitlab.yml` in order to enable it.
1. Use the sample NGINX configuration file that is found under
[`lib/support/nginx/registry-ssl`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/support/nginx/registry-ssl) and edit it to match the
[`lib/support/nginx/registry-ssl`](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/support/nginx/registry-ssl) and edit it to match the
`host`, `port` and TLS certs paths.
The contents of `gitlab.yml` are:
......
......@@ -13,10 +13,6 @@ description: 'Learn how to administer GitLab Pages.'
GitLab Pages allows for hosting of static sites. It must be configured by an
administrator. Separate [user documentation][pages-userguide] is available.
Read the [changelog](#changelog) if you are upgrading to a new GitLab
version as it may include new features and changes needed to be made in your
configuration.
NOTE: **Note:**
This guide is for Omnibus GitLab installations. If you have installed
GitLab from source, see
......@@ -433,34 +429,6 @@ Pages are part of the [regular backup][backup] so there is nothing to configure.
You should strongly consider running GitLab pages under a different hostname
than GitLab to prevent XSS attacks.
## Changelog
GitLab Pages were first introduced in GitLab EE 8.3. Since then, many features
where added, like custom CNAME and TLS support, and many more are likely to
come. Below is a brief changelog. If no changes were introduced or a version is
missing from the changelog, assume that the documentation is the same as the
latest previous version.
---
**GitLab 8.17 ([documentation](https://gitlab.com/gitlab-org/gitlab-foss/blob/8-17-stable/doc/administration/pages/index.md))**
- GitLab Pages were ported to Community Edition in GitLab 8.17.
- Documentation was refactored to be more modular and easy to follow.
**GitLab 8.5 ([documentation](https://gitlab.com/gitlab-org/gitlab/blob/8-5-stable-ee/doc/pages/administration.md))**
- In GitLab 8.5 we introduced the [gitlab-pages][] daemon which is now the
recommended way to set up GitLab Pages.
- The [NGINX configs][] have changed to reflect this change. So make sure to
update them.
- Custom CNAME and TLS certificates support.
- Documentation was moved to one place.
**GitLab 8.3 ([documentation](https://gitlab.com/gitlab-org/gitlab/blob/8-3-stable-ee/doc/pages/administration.md))**
- GitLab Pages feature was introduced.
[backup]: ../../raketasks/backup_restore.md
[ce-14605]: https://gitlab.com/gitlab-org/gitlab-foss/issues/14605
[ee-80]: https://gitlab.com/gitlab-org/gitlab/merge_requests/80
......
......@@ -455,5 +455,5 @@ than GitLab to prevent XSS attacks.
[pages-userguide]: ../../user/project/pages/index.md
[restart]: ../restart_gitlab.md#installations-from-source
[gitlab-pages]: https://gitlab.com/gitlab-org/gitlab-pages/tree/v0.4.0
[gl-example]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/support/init.d/gitlab.default.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab/blob/master/lib/support/init.d/gitlab.default.example
[shared runners]: ../../ci/runners/README.md
......@@ -118,6 +118,6 @@ randomly placed on one of the selected paths.
[restart-gitlab]: restart_gitlab.md#installations-from-source
[reconfigure-gitlab]: restart_gitlab.md#omnibus-gitlab-reconfigure
[backups]: ../raketasks/backup_restore.md
[raketask]: https://gitlab.com/gitlab-org/gitlab-foss/blob/033e5423a2594e08a7ebcd2379bd2331f4c39032/lib/backup/repository.rb#L54-56
[repospath]: https://gitlab.com/gitlab-org/gitlab-foss/blob/8-9-stable/config/gitlab.yml.example#L457
[raketask]: https://gitlab.com/gitlab-org/gitlab/blob/033e5423a2594e08a7ebcd2379bd2331f4c39032/lib/backup/repository.rb#L54-56
[repospath]: https://gitlab.com/gitlab-org/gitlab/blob/8-9-stable/config/gitlab.yml.example#L457
[ce-11449]: https://gitlab.com/gitlab-org/gitlab-foss/merge_requests/11449
......@@ -141,5 +141,5 @@ If you are using other init systems, like systemd, you can check the
[install]: ../install/installation.md "Documentation to install GitLab from source"
[mailroom]: reply_by_email.md "Used for replying by email in GitLab issues and merge requests"
[chef]: https://www.chef.io/products/chef-infra/ "Chef official website"
[src-service]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/support/init.d/gitlab "GitLab init service file"
[src-service]: https://gitlab.com/gitlab-org/gitlab/blob/master/lib/support/init.d/gitlab "GitLab init service file"
[gl-recipes]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/init "GitLab Recipes repository"
......@@ -533,7 +533,7 @@ Example response:
},
"description" : null,
"sha" : "18f3e63d05582537db6d183d9d557be09e1f90c8",
"target_url" : "https://gitlab.example.com/thedude/gitlab-ce/builds/91",
"target_url" : "https://gitlab.example.com/thedude/gitlab-foss/builds/91",
"finished_at" : null,
"id" : 91,
"ref" : "master"
......@@ -544,7 +544,7 @@ Example response:
"allow_failure" : false,
"status" : "pending",
"created_at" : "2016-01-19T08:40:25.832Z",
"target_url" : "https://gitlab.example.com/thedude/gitlab-ce/builds/90",
"target_url" : "https://gitlab.example.com/thedude/gitlab-foss/builds/90",
"id" : 90,
"finished_at" : null,
"ref" : "master",
......
......@@ -61,7 +61,7 @@ POST /features/:name
| `feature_group` | string | no | A Feature group name |
| `user` | string | no | A GitLab username |
| `group` | string | no | A GitLab group's path, for example `gitlab-org` |
| `project` | string | no | A projects path, for example `gitlab-org/gitlab-ce` |
| `project` | string | no | A projects path, for example `gitlab-org/gitlab-foss` |
Note that you can enable or disable a feature for a `feature_group`, a `user`,
a `group`, and a `project` in a single API call.
......
......@@ -23,12 +23,12 @@ Example response:
{
"id": 1,
"project_id": 1,
"name": "gitlab-ce"
"name": "gitlab-foss"
},
{
"id": 2,
"project_id": 2,
"name": "gitlab-ee"
"name": "gitlab"
}
]
```
......@@ -46,7 +46,7 @@ GET /project_aliases/:name
| `name` | string | yes | The name of the alias |
```
curl --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/project_aliases/gitlab-ee"
curl --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/project_aliases/gitlab"
```
Example response:
......@@ -55,7 +55,7 @@ Example response:
{
"id": 1,
"project_id": 1,
"name": "gitlab-ee"
"name": "gitlab"
}
```
......@@ -74,13 +74,13 @@ POST /project_aliases
| `name` | string | yes | The name of the alias. Must be unique. |
```
curl --request POST --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/project_aliases" --form "project_id=1" --form "name=gitlab-ee"
curl --request POST --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/project_aliases" --form "project_id=1" --form "name=gitlab"
```
or
```
curl --request POST --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/project_aliases" --form "project_id=gitlab-org/gitlab-ee" --form "name=gitlab-ee"
curl --request POST --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/project_aliases" --form "project_id=gitlab-org/gitlab" --form "name=gitlab"
```
Example response:
......@@ -89,7 +89,7 @@ Example response:
{
"id": 1,
"project_id": 1,
"name": "gitlab-ee"
"name": "gitlab"
}
```
......@@ -107,5 +107,5 @@ DELETE /project_aliases/:name
| `name` | string | yes | The name of the alias |
```
curl --request DELETE --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/project_aliases/gitlab-ee"
curl --request DELETE --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/project_aliases/gitlab"
```
......@@ -809,16 +809,16 @@ If the project is a fork, and you provide a valid token to authenticate, the
"description":"GitLab Community Edition",
"name":"GitLab Community Edition",
"name_with_namespace":"GitLab.org / GitLab Community Edition",
"path":"gitlab-ce",
"path_with_namespace":"gitlab-org/gitlab-ce",
"path":"gitlab-foss",
"path_with_namespace":"gitlab-org/gitlab-foss",
"created_at":"2013-09-26T06:02:36.000Z",
"default_branch":"master",
"tag_list":[],
"ssh_url_to_repo":"git@gitlab.com:gitlab-org/gitlab-ce.git",
"ssh_url_to_repo":"git@gitlab.com:gitlab-org/gitlab-foss.git",
"http_url_to_repo":"https://gitlab.com/gitlab-org/gitlab-foss.git",
"web_url":"https://gitlab.com/gitlab-org/gitlab-foss",
"avatar_url":"https://assets.gitlab-static.net/uploads/-/system/project/avatar/13083/logo-extra-whitespace.png",
"license_url": "https://gitlab.com/gitlab-org/gitlab-foss/blob/master/LICENSE",
"license_url": "https://gitlab.com/gitlab-org/gitlab/blob/master/LICENSE",
"license": {
"key": "mit",
"name": "MIT License",
......
......@@ -184,8 +184,8 @@ Example response:
"id": 1,
"name": "GitLab Community Edition",
"name_with_namespace": "GitLab.org / GitLab Community Edition",
"path": "gitlab-ce",
"path_with_namespace": "gitlab-org/gitlab-ce"
"path": "gitlab-foss",
"path_with_namespace": "gitlab-org/gitlab-foss"
}
],
"token": "205086a8e3b9a2b818ffac9b89d102",
......@@ -243,8 +243,8 @@ Example response:
"id": 1,
"name": "GitLab Community Edition",
"name_with_namespace": "GitLab.org / GitLab Community Edition",
"path": "gitlab-ce",
"path_with_namespace": "gitlab-org/gitlab-ce"
"path": "gitlab-foss",
"path_with_namespace": "gitlab-org/gitlab-foss"
}
],
"token": "205086a8e3b9a2b818ffac9b89d102",
......
......@@ -1189,7 +1189,7 @@ GET /projects/:id/services/jenkins-deprecated
```
[jira-doc]: ../user/project/integrations/jira.md
[old-jira-api]: https://gitlab.com/gitlab-org/gitlab-foss/blob/8-13-stable/doc/api/services.md#jira
[old-jira-api]: https://gitlab.com/gitlab-org/gitlab/blob/8-13-stable/doc/api/services.md#jira
## MockCI
......
......@@ -36,8 +36,8 @@ Example Response:
"id": 2,
"name": "Gitlab Ce",
"name_with_namespace": "Gitlab Org / Gitlab Ce",
"path": "gitlab-ce",
"path_with_namespace": "gitlab-org/gitlab-ce"
"path": "gitlab-foss",
"path_with_namespace": "gitlab-org/gitlab-foss"
},
"author": {
"name": "Administrator",
......@@ -109,8 +109,8 @@ Example Response:
"id": 2,
"name": "Gitlab Ce",
"name_with_namespace": "Gitlab Org / Gitlab Ce",
"path": "gitlab-ce",
"path_with_namespace": "gitlab-org/gitlab-ce"
"path": "gitlab-foss",
"path_with_namespace": "gitlab-org/gitlab-foss"
},
"author": {
"name": "Maxie Medhurst",
......@@ -207,8 +207,8 @@ Example Response:
"id": 2,
"name": "Gitlab Ce",
"name_with_namespace": "Gitlab Org / Gitlab Ce",
"path": "gitlab-ce",
"path_with_namespace": "gitlab-org/gitlab-ce"
"path": "gitlab-foss",
"path_with_namespace": "gitlab-org/gitlab-foss"
},
"author": {
"name": "Administrator",
......
......@@ -99,7 +99,6 @@ via GitHub integration. If you want to exclusively run pipelines on external pul
requests and not on branches you can add `except: [branches]` to the job specs.
[Read more](https://gitlab.com/gitlab-org/gitlab/issues/24089#workaround).
[ee-4642]: https://gitlab.com/gitlab-org/gitlab/merge_requests/4642
[ee-4642]: https://gitlab.com/gitlab-org/gitlab/merge_requests/4642
[eep]: https://about.gitlab.com/pricing/
[mirroring]: ../../workflow/repository_mirroring.md
......
......@@ -204,7 +204,7 @@ the following (you can even use them interchangeably):
- A colon (`:`).
NOTE: **Note:**
More specifically, it uses [this](https://gitlab.com/gitlab-org/gitlab-foss/blob/2f3dc314f42dbd79813e6251792853bc231e69dd/app/models/commit_status.rb#L99) regular expression: `\d+[\s:\/\\]+\d+\s*`.
More specifically, it uses [this](https://gitlab.com/gitlab-org/gitlab/blob/2f3dc314f42dbd79813e6251792853bc231e69dd/app/models/commit_status.rb#L99) regular expression: `\d+[\s:\/\\]+\d+\s*`.
#### How grouping works
......
......@@ -263,12 +263,12 @@ export CI_JOB_TOKEN="abcde-1234ABCD5678ef"
export CI_PIPELINE_ID="1000"
export CI_PIPELINE_IID="10"
export CI_PAGES_DOMAIN="gitlab.io"
export CI_PAGES_URL="https://gitlab-org.gitlab.io/gitlab-ce"
export CI_PAGES_URL="https://gitlab-org.gitlab.io/gitlab-foss"
export CI_PROJECT_ID="34"
export CI_PROJECT_DIR="/builds/gitlab-org/gitlab-foss"
export CI_PROJECT_NAME="gitlab-ce"
export CI_PROJECT_NAME="gitlab-foss"
export CI_PROJECT_NAMESPACE="gitlab-org"
export CI_PROJECT_PATH="gitlab-org/gitlab-ce"
export CI_PROJECT_PATH="gitlab-org/gitlab-foss"
export CI_PROJECT_URL="https://example.com/gitlab-org/gitlab-foss"
export CI_REGISTRY="registry.example.com"
export CI_REGISTRY_IMAGE="registry.example.com/gitlab-org/gitlab-foss"
......
......@@ -20,7 +20,7 @@ We have complete examples of configuring pipelines:
- For a quick introduction to GitLab CI, follow our [quick start guide](../quick_start/README.md).
- For a collection of examples, see [GitLab CI/CD Examples](../examples/README.md).
- To see a large `.gitlab-ci.yml` file used in an enterprise, see the [`.gitlab-ci.yml` file for `gitlab-ce`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/.gitlab-ci.yml).
- To see a large `.gitlab-ci.yml` file used in an enterprise, see the [`.gitlab-ci.yml` file for `gitlab`](https://gitlab.com/gitlab-org/gitlab/blob/master/.gitlab-ci.yml).
NOTE: **Note:**
If you have a [mirrored repository where GitLab pulls from](../../workflow/repository_mirroring.md#pulling-from-a-remote-repository-starter),
......@@ -436,13 +436,13 @@ repository and not forks:
```yaml
job:
only:
- branches@gitlab-org/gitlab-ce
- branches@gitlab-org/gitlab
except:
- master@gitlab-org/gitlab-ce
- /^release/.*$/@gitlab-org/gitlab-ce
- master@gitlab-org/gitlab
- /^release/.*$/@gitlab-org/gitlab
```
The above example will run `job` for all branches on `gitlab-org/gitlab-ce`,
The above example will run `job` for all branches on `gitlab-org/gitlab`,
except `master` and those with names prefixed with `release/`.
If a job does not have an `only` rule, `only: ['branches', 'tags']` is set by
......@@ -837,7 +837,7 @@ docker build:
Additional job configuration may be added to rules in the future. If something
useful isn't available, please
[open an issue](https://www.gitlab.com/gitlab-org/gitlab-foss/issues).
[open an issue](https://www.gitlab.com/gitlab-org/gitlab/issues).
### `tags`
......@@ -1894,12 +1894,12 @@ This example creates three paths of execution:
- 50 if the `ci_dag_limit_needs` feature flag is disabled.
- It is impossible for now to have `needs: []` (empty needs),
the job always needs to depend on something, unless this is the job
in the first stage (see [gitlab-ce#65504](https://gitlab.com/gitlab-org/gitlab-foss/issues/65504)).
in the first stage (see [gitlab-foss#65504](https://gitlab.com/gitlab-org/gitlab-foss/issues/65504)).
- If `needs:` refers to a job that is marked as `parallel:`.
the current job will depend on all parallel jobs created.
- `needs:` is similar to `dependencies:` in that it needs to use jobs from
prior stages, meaning it is impossible to create circular
dependencies or depend on jobs in the current stage (see [gitlab-ce#65505](https://gitlab.com/gitlab-org/gitlab-foss/issues/65505)).
dependencies or depend on jobs in the current stage (see [gitlab-foss#65505](https://gitlab.com/gitlab-org/gitlab-foss/issues/65505)).
- Related to the above, stages must be explicitly defined for all jobs
that have the keyword `needs:` or are referred to by one.
......@@ -2243,7 +2243,7 @@ or template includes.
> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/53445) in GitLab 11.7.
`include:template` can be used to include `.gitlab-ci.yml` templates that are
[shipped with GitLab](https://gitlab.com/gitlab-org/gitlab-foss/tree/master/lib/gitlab/ci/templates).
[shipped with GitLab](https://gitlab.com/gitlab-org/gitlab/tree/master/lib/gitlab/ci/templates).
For example:
......
......@@ -14,7 +14,7 @@ server.
## Configuration
In the [`gitlab.yml` gravatar section](https://gitlab.com/gitlab-org/gitlab-foss/blob/672bd3902d86b78d730cea809fce312ec49d39d7/config/gitlab.yml.example#L122), set
In the [`gitlab.yml` gravatar section](https://gitlab.com/gitlab-org/gitlab/blob/672bd3902d86b78d730cea809fce312ec49d39d7/config/gitlab.yml.example#L122), set
the configuration options as follows:
### For HTTP
......
......@@ -526,7 +526,7 @@ Using these helpers, we can build specs like this:
let(:mutation) do
graphql_mutation(
:merge_request_set_wip,
project_path: 'gitlab-org/gitlab-ce',
project_path: 'gitlab-org/gitlab-foss',
iid: '1',
wip: true
)
......
......@@ -14,7 +14,7 @@ Always use an [Entity] to present the endpoint's payload.
## Methods and parameters description
Every method must be described using the [Grape DSL](https://github.com/ruby-grape/grape#describing-methods)
(see <https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/api/environments.rb>
(see <https://gitlab.com/gitlab-org/gitlab/blob/master/lib/api/environments.rb>
for a good example):
- `desc` for the method summary. You should pass it a block for additional
......@@ -104,6 +104,6 @@ For instance:
- endpoint = expose_path(api_v4_projects_issues_related_merge_requests_path(id: @project.id, issue_iid: @issue.iid))
```
[Entity]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/api/entities.rb
[Entity]: https://gitlab.com/gitlab-org/gitlab/blob/master/lib/api/entities.rb
[validation, and coercion of the parameters]: https://github.com/ruby-grape/grape#parameter-validation-and-coercion
[installing GitLab under a relative URL]: https://docs.gitlab.com/ee/install/relative_url.html
......@@ -614,7 +614,7 @@ GitLab Shell has a configuration file at `/home/git/gitlab-shell/config.yml`.
### Maintenance Tasks
[GitLab](https://gitlab.com/gitlab-org/gitlab/tree/master) provides rake tasks with which you see version information and run a quick check on your configuration to ensure it is configured properly within the application. See [maintenance rake tasks](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/doc/raketasks/maintenance.md).
[GitLab](https://gitlab.com/gitlab-org/gitlab/tree/master) provides rake tasks with which you see version information and run a quick check on your configuration to ensure it is configured properly within the application. See [maintenance rake tasks](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/raketasks/maintenance.md).
In a nutshell, do the following:
```
......@@ -638,7 +638,7 @@ We've also detailed [our architecture of GitLab.com](https://about.gitlab.com/ha
[unicorn-omnibus]: https://docs.gitlab.com/omnibus/settings/unicorn.html
[unicorn-charts]: https://docs.gitlab.com/charts/charts/gitlab/unicorn/
[unicorn-source]: ../install/installation.md#configure-it
[gitlab-yml]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/config/gitlab.yml.example
[gitlab-yml]: https://gitlab.com/gitlab-org/gitlab/blob/master/config/gitlab.yml.example
[sidekiq-omnibus]: https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-config-template/gitlab.rb.template
[sidekiq-charts]: https://docs.gitlab.com/charts/charts/gitlab/sidekiq/
[gitaly-omnibus]: ../administration/gitaly/index.md
......
......@@ -85,14 +85,14 @@ for CE and EE. If the `ee-compat-check` job fails, this process is required.
This method only requires that you have cloned both CE and EE into your computer.
If you don't have them yet, please go ahead and clone them:
- Clone CE repo: `git clone git@gitlab.com:gitlab-org/gitlab-ce.git`
- Clone EE repo: `git clone git@gitlab.com:gitlab-org/gitlab-ee.git`
- Clone CE repo: `git clone git@gitlab.com:gitlab-org/gitlab-foss.git`
- Clone EE repo: `git clone git@gitlab.com:gitlab-org/gitlab.git`
And the only additional setup we need is to add CE as remote of EE and vice-versa:
- Open two terminal windows, one in CE, and another one in EE:
- In EE: `git remote add ce git@gitlab.com:gitlab-org/gitlab-ce.git`
- In CE: `git remote add ee git@gitlab.com:gitlab-org/gitlab-ee.git`
- In EE: `git remote add ce git@gitlab.com:gitlab-org/gitlab-foss.git`
- In CE: `git remote add ee git@gitlab.com:gitlab-org/gitlab.git`
That's all setup we need, so that we can cherry-pick a commit from CE to EE, and
from EE to CE.
......
......@@ -9,7 +9,7 @@ that will create:
- A deb package for Ubuntu 16.04, available as a build artifact, and
- A docker image, which is pushed to [Omnibus GitLab's container
registry](https://gitlab.com/gitlab-org/omnibus-gitlab/container_registry)
(images titled `gitlab-ce` and `gitlab-ee` respectively and image tag is the
(images titled `gitlab-foss` and `gitlab-ee` respectively and image tag is the
commit which triggered the pipeline).
When you push a commit to either the GitLab CE or GitLab EE project, the
......
......@@ -140,7 +140,7 @@ When writing commit messages, please follow the guidelines below:
- The merge request must not contain more than 10 commit messages.
If the guidelines are not met, the MR will not pass the
[Danger checks](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/danger/commit_messages/Dangerfile).
[Danger checks](https://gitlab.com/gitlab-org/gitlab/blob/master/danger/commit_messages/Dangerfile).
For more information see [How to Write a Git Commit Message](https://chris.beams.io/posts/git-commit/).
Example commit message template that can be used on your machine that embodies the above (guide for [how to apply template](https://codeinthehole.com/tips/a-useful-template-for-commit-messages/)):
......@@ -244,5 +244,5 @@ request:
1. [The upgrade guide](../../update/upgrading_from_source.md).
1. The [GitLab Installation Guide](../../install/installation.md#1-packages-and-dependencies).
1. The [GitLab Development Kit](https://gitlab.com/gitlab-org/gitlab-development-kit).
1. The [CI environment preparation](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/scripts/prepare_build.sh).
1. The [CI environment preparation](https://gitlab.com/gitlab-org/gitlab/blob/master/scripts/prepare_build.sh).
1. The [Omnibus package creator](https://gitlab.com/gitlab-org/omnibus-gitlab).
......@@ -15,7 +15,7 @@ to the existing rules, then this is the document for you.
## Operation
On startup, Danger reads a [`Dangerfile`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/Dangerfile)
On startup, Danger reads a [`Dangerfile`](https://gitlab.com/gitlab-org/gitlab/blob/master/Dangerfile)
from the project root. GitLab's Danger code is decomposed into a set of helpers
and plugins, all within the [`danger/`](https://gitlab.com/gitlab-org/gitlab-foss/tree/master/danger/)
subdirectory, so ours just tells Danger to load it all. Danger will then run
......
......@@ -78,7 +78,7 @@ and details for a database reviewer:
- Format any queries with a SQL query formatter, for example with [sqlformat.darold.net](http://sqlformat.darold.net).
- Consider providing query plans via a link to [explain.depesz.com](https://explain.depesz.com) or another tool instead of textual form.
- For query changes, it is best to provide the SQL query along with a plan *before* and *after* the change. This helps to spot differences quickly.
- When providing query plans, make sure to use good parameter values, so that the query executed is a good example and also hits enough data. Usually, the `gitlab-org` namespace (`namespace_id = 9970`) and the `gitlab-org/gitlab-ce` project (`project_id = 13083`) provides enough data to serve as a good example.
- When providing query plans, make sure to use good parameter values, so that the query executed is a good example and also hits enough data. Usually, the `gitlab-org` namespace (`namespace_id = 9970`) and the `gitlab-org/gitlab-foss` project (`project_id = 13083`) provides enough data to serve as a good example.
### How to review for database
......
......@@ -18,8 +18,8 @@ from where content is sourced, the `gitlab-docs` project, and the published outp
```mermaid
graph LR
A[gitlab-ce/doc]
B[gitlab-ee/doc]
A[gitlab-foss/doc]
B[gitlab/doc]
C[gitlab-runner/docs]
D[omnibus-gitlab/doc]
E[charts/doc]
......
......@@ -170,7 +170,7 @@ still having access the class's implementation with `super`.
There are a few gotchas with it:
- you should always [`extend ::Gitlab::Utils::Override`](utilities.md#overridehttpsgitlabcomgitlab-orggitlab-fossblobmasterlibgitlabutilsoverriderb) and use `override` to
- you should always [`extend ::Gitlab::Utils::Override`](utilities.md#override) and use `override` to
guard the "overrider" method to ensure that if the method gets renamed in
CE, the EE override won't be silently forgotten.
- when the "overrider" would add a line in the middle of the CE
......
......@@ -59,7 +59,7 @@ Additionally, if you need large repos or multiple forks for testing, please cons
## How does it work?
The Elasticsearch integration depends on an external indexer. We ship an [indexer written in Go](https://gitlab.com/gitlab-org/gitlab-elasticsearch-indexer). The user must trigger the initial indexing via a rake task but, after this is done, GitLab itself will trigger reindexing when required via `after_` callbacks on create, update, and destroy that are inherited from [/ee/app/models/concerns/elastic/application_search.rb](https://gitlab.com/gitlab-org/gitlab/blob/master/ee/app/models/concerns/elastic/application_search.rb).
The Elasticsearch integration depends on an external indexer. We ship an [indexer written in Go](https://gitlab.com/gitlab-org/gitlab-elasticsearch-indexer). The user must trigger the initial indexing via a rake task but, after this is done, GitLab itself will trigger reindexing when required via `after_` callbacks on create, update, and destroy that are inherited from [/ee/app/models/concerns/elastic/application_search.rb](https://gitlab.com/gitlab-org/gitlab/blob/cc723071ad337573e0360a879cbf99bc4fb7adb9/ee/app/models/concerns/elastic/application_versioned_search.rb).
All indexing after the initial one is done via `ElasticIndexerWorker` (sidekiq jobs).
......
......@@ -88,15 +88,15 @@ for the format of the email key:
- Actions are always at the end, separated by `-`. For example `-issue` or `-merge-request`
- If your feature is related to a project, the key begins with the project identifiers (project path slug
and project id), separated by `-`. For example, `gitlab-org-gitlab-ce-20`
and project id), separated by `-`. For example, `gitlab-org-gitlab-foss-20`
- Additional information, such as an author's token, can be added between the project identifiers and
the action, separated by `-`. For example, `gitlab-org-gitlab-ce-20-Author_Token12345678-issue`
the action, separated by `-`. For example, `gitlab-org-gitlab-foss-20-Author_Token12345678-issue`
- You register your handlers in `lib/gitlab/email/handler.rb`
Examples of valid email keys:
- `gitlab-org-gitlab-ce-20-Author_Token12345678-issue` (create a new issue)
- `gitlab-org-gitlab-ce-20-Author_Token12345678-merge-request` (create a new merge request)
- `gitlab-org-gitlab-foss-20-Author_Token12345678-issue` (create a new issue)
- `gitlab-org-gitlab-foss-20-Author_Token12345678-merge-request` (create a new merge request)
- `1234567890abcdef1234567890abcdef-unsubscribe` (unsubscribe from a conversation)
- `1234567890abcdef1234567890abcdef` (reply to a conversation)
......
......@@ -44,7 +44,7 @@ See also the [corresponding UX guide](https://design.gitlab.com/#/components/dro
See also the [corresponding UX guide](https://design.gitlab.com/#/components/modals).
We have a reusable Vue component for modals: [vue_shared/components/gl_modal.vue](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/app/assets/javascripts/vue_shared/components/gl_modal.vue)
We have a reusable Vue component for modals: [vue_shared/components/gl_modal.vue](https://gitlab.com/gitlab-org/gitlab/blob/master/app/assets/javascripts/vue_shared/components/gl_modal.vue)
Here is an example of how to use it:
......
......@@ -77,4 +77,4 @@ new Foo({ container: '.my-element' });
You can find an example of the above in this [class][container-class-example];
[container-class-example]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/app/assets/javascripts/mini_pipeline_graph_dropdown.js
[container-class-example]: https://gitlab.com/gitlab-org/gitlab/blob/master/app/assets/javascripts/mini_pipeline_graph_dropdown.js
......@@ -26,7 +26,7 @@ question:
document.body.dataset.page
```
Find here the [source code setting the attribute](https://gitlab.com/gitlab-org/gitlab-foss/blob/cc5095edfce2b4d4083a4fb1cdc7c0a1898b9921/app/views/layouts/application.html.haml#L4).
Find here the [source code setting the attribute](https://gitlab.com/gitlab-org/gitlab/blob/cc5095edfce2b4d4083a4fb1cdc7c0a1898b9921/app/views/layouts/application.html.haml#L4).
#### Rails routes
......
......@@ -119,6 +119,6 @@ Read more about the [Apollo] client in the [Apollo documentation](https://www.ap
[Apollo]: https://www.apollographql.com/
[vue-apollo]: https://github.com/Akryum/vue-apollo/
[feature-flags]: ../feature_flags.md
[default-client]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/app/assets/javascripts/lib/graphql.js
[default-client]: https://gitlab.com/gitlab-org/gitlab/blob/master/app/assets/javascripts/lib/graphql.js
[vue-test-utils]: https://vue-test-utils.vuejs.org/
[apollo-link-state]: https://www.apollographql.com/docs/link/links/state.html
......@@ -7,7 +7,7 @@ See the relevant style guides for our guidelines and for information on linting:
We defer to [Airbnb][airbnb-js-style-guide] on most style-related
conventions and enforce them with eslint.
See [our current .eslintrc](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/.eslintrc.yml) for specific rules and patterns.
See [our current .eslintrc](https://gitlab.com/gitlab-org/gitlab/blob/master/.eslintrc.yml) for specific rules and patterns.
### Common
......@@ -713,7 +713,7 @@ The goal of this accord is to make sure we are all on the same page.
- [SCSS](style_guide_scss.md)
[airbnb-js-style-guide]: https://github.com/airbnb/javascript
[eslintrc]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/.eslintrc
[eslintrc]: https://gitlab.com/gitlab-org/gitlab/blob/master/.eslintrc
[eslint-plugin-vue]: https://github.com/vuejs/eslint-plugin-vue
[eslint-plugin-vue-rules]: https://github.com/vuejs/eslint-plugin-vue#bulb-rules
[vue-order]: https://github.com/vuejs/eslint-plugin-vue/blob/master/docs/rules/order-in-components.md
......@@ -13,12 +13,12 @@ led by the [GitLab UI WG](https://gitlab.com/gitlab-com/www-gitlab-com/merge_req
#### Where are utility classes defined?
- [Bootstrap's Utility Classes](https://getbootstrap.com/docs/4.3/utilities/)
- [`common.scss`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/app/assets/stylesheets/framework/common.scss) (old)
- [`utilities.scss`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/app/assets/stylesheets/utilities.scss) (new)
- [`common.scss`](https://gitlab.com/gitlab-org/gitlab/blob/master/app/assets/stylesheets/framework/common.scss) (old)
- [`utilities.scss`](https://gitlab.com/gitlab-org/gitlab/blob/master/app/assets/stylesheets/utilities.scss) (new)
#### Where should I put new utility classes?
New utility classes should be added to [`utilities.scss`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/app/assets/stylesheets/utilities.scss). Existing classes include:
New utility classes should be added to [`utilities.scss`](https://gitlab.com/gitlab-org/gitlab/blob/master/app/assets/stylesheets/utilities.scss). Existing classes include:
| Name | Pattern | Example |
|------|---------|---------|
......@@ -41,8 +41,8 @@ This encourages an organic growth of component classes and prevents the creation
Examples of component classes that were created using "utility-first" include:
- [`.circle-icon-container`](https://gitlab.com/gitlab-org/gitlab-foss/blob/579fa8b8ec7eb38d40c96521f517c9dab8c3b97a/app/assets/stylesheets/framework/icons.scss#L85)
- [`.d-flex-center`](https://gitlab.com/gitlab-org/gitlab-foss/blob/900083d89cd6af391d26ab7922b3f64fa2839bef/app/assets/stylesheets/framework/common.scss#L425)
- [`.circle-icon-container`](https://gitlab.com/gitlab-org/gitlab/blob/579fa8b8ec7eb38d40c96521f517c9dab8c3b97a/app/assets/stylesheets/framework/icons.scss#L85)
- [`.d-flex-center`](https://gitlab.com/gitlab-org/gitlab/blob/900083d89cd6af391d26ab7922b3f64fa2839bef/app/assets/stylesheets/framework/common.scss#L425)
Inspiration:
......
......@@ -91,11 +91,11 @@ sure it is clearly communicated to your team, and the Production team if you
anticipate any potential problems.
Feature gates can also be actor based, for example a feature could first be
enabled for only the `gitlab-ce` project. The project is passed by supplying a
enabled for only the `gitlab` project. The project is passed by supplying a
`--project` flag:
```
/chatops run feature set --project=gitlab-org/gitlab-ce some_feature true
/chatops run feature set --project=gitlab-org/gitlab some_feature true
```
For groups the `--group` flag is available:
......
......@@ -146,4 +146,4 @@ end
[CarrierWave]: https://github.com/carrierwaveuploader/carrierwave
[Hashed Storage]: ../administration/repository_storage_types.md
[all-in-one rake task]: ../administration/raketasks/uploads/migrate.md
[category list]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/tasks/gitlab/uploads/migrate.rake
[category list]: https://gitlab.com/gitlab-org/gitlab/blob/master/lib/tasks/gitlab/uploads/migrate.rake
......@@ -62,8 +62,8 @@ file and ask your manager to review and merge.
```yaml
projects:
gitlab-ee: reviewer go
gitlab-ce: reviewer go
gitlab: reviewer go
gitlab-foss: reviewer go
```
## Code style and format
......
......@@ -147,7 +147,7 @@ refresh_service.execute(oldrev, newrev, ref)
See ["Why is it bad style to `rescue Exception => e` in Ruby?"][Exception].
_**Note:** This rule is [enforced automatically by
Rubocop](https://gitlab.com/gitlab-org/gitlab-foss/blob/8-4-stable/.rubocop.yml#L911-914)._
Rubocop](https://gitlab.com/gitlab-org/gitlab/blob/8-4-stable/.rubocop.yml#L911-914)._
[Exception]: http://stackoverflow.com/q/10048173/223897
......@@ -156,7 +156,7 @@ Rubocop](https://gitlab.com/gitlab-org/gitlab-foss/blob/8-4-stable/.rubocop.yml#
Using the inline `:javascript` Haml filters comes with a
performance overhead. Using inline JavaScript is not a good way to structure your code and should be avoided.
_**Note:** We've [removed these two filters](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/config/initializers/hamlit.rb)
_**Note:** We've [removed these two filters](https://gitlab.com/gitlab-org/gitlab/blob/master/config/initializers/hamlit.rb)
in an initializer._
### Further reading
......
......@@ -236,11 +236,11 @@ This makes use of [`Intl.DateTimeFormat`].
- In Ruby/HAML, we have two ways of adding format to dates and times:
1. **Through the `l` helper**, i.e. `l(active_session.created_at, format: :short)`. We have some predefined formats for
[dates](https://gitlab.com/gitlab-org/gitlab-foss/blob/v11.7.0/config/locales/en.yml#L54) and [times](https://gitlab.com/gitlab-org/gitlab-foss/blob/v11.7.0/config/locales/en.yml#L261).
[dates](https://gitlab.com/gitlab-org/gitlab/blob/4ab54c2233e91f60a80e5b6fa2181e6899fdcc3e/config/locales/en.yml#L54) and [times](https://gitlab.com/gitlab-org/gitlab/blob/4ab54c2233e91f60a80e5b6fa2181e6899fdcc3e/config/locales/en.yml#L262).
If you need to add a new format, because other parts of the code could benefit from it,
you'll need to add it to [en.yml](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/config/locales/en.yml) file.
you'll need to add it to [en.yml](https://gitlab.com/gitlab-org/gitlab/blob/master/config/locales/en.yml) file.
1. **Through `strftime`**, i.e. `milestone.start_date.strftime('%b %-d')`. We use `strftime` in case none of the formats
defined on [en.yml](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/config/locales/en.yml) matches the date/time
defined on [en.yml](https://gitlab.com/gitlab-org/gitlab/blob/master/config/locales/en.yml) matches the date/time
specifications we need, and if there is no need to add it as a new format because is very particular (i.e. it's only used in a single view).
## Best practices
......
......@@ -29,12 +29,12 @@ We use the [`kubeclient`](https://rubygems.org/gems/kubeclient) gem to
perform Kubernetes API calls. As the `kubeclient` gem does not support
different API Groups (e.g. `apis/rbac.authorization.k8s.io`) from a
single client, we have created a wrapper class,
[`Gitlab::Kubernetes::KubeClient`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/gitlab/kubernetes/kube_client.rb)
[`Gitlab::Kubernetes::KubeClient`](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/kubernetes/kube_client.rb)
that will enable you to achieve this.
Selected Kubernetes API groups are currently supported. Do add support
for new API groups or methods to
[`Gitlab::Kubernetes::KubeClient`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/gitlab/kubernetes/kube_client.rb)
[`Gitlab::Kubernetes::KubeClient`](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/kubernetes/kube_client.rb)
if you need to use them. New API groups or API group versions can be
added to `SUPPORTED_API_GROUPS` - internally, this will create an
internal client for that group. New methods can be added as a delegation
......@@ -54,7 +54,7 @@ worker](sidekiq_style_guide.md).
There are instances where you would like to make calls to Kubernetes and
return the response and as such a background worker does not seem to be
a good fit. For such cases you should make use of [reactive
caching](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/app/models/concerns/reactive_caching.rb).
caching](https://gitlab.com/gitlab-org/gitlab/blob/master/app/models/concerns/reactive_caching.rb).
For example:
```ruby
......@@ -72,7 +72,7 @@ For example:
### Testing
We have some Webmock stubs in
[`KubernetesHelpers`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/spec/support/helpers/kubernetes_helpers.rb)
[`KubernetesHelpers`](https://gitlab.com/gitlab-org/gitlab/blob/master/spec/support/helpers/kubernetes_helpers.rb)
which can help with mocking out calls to Kubernetes API in your tests.
## Security
......@@ -87,7 +87,7 @@ a cluster.
Mitigation strategies include:
1. Not allowing redirects to attacker controller resources:
[`Kubeclient::KubeClient`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/gitlab/kubernetes/kube_client.rb#)
[`Kubeclient::KubeClient`](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/kubernetes/kube_client.rb#)
can be configured to disallow any redirects by passing in
`http_max_redirects: 0` as an option.
1. Not exposing error messages: by doing so, we
......@@ -111,7 +111,7 @@ Logs related to the Kubernetes integration can be found in
GDK install, this will be present in `log/kubernetes.log`.
Some services such as
[`Clusters::Applications::InstallService`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/app/services/clusters/applications/install_service.rb#L18)
[`Clusters::Applications::InstallService`](https://gitlab.com/gitlab-org/gitlab/blob/master/app/services/clusters/applications/install_service.rb#L18)
rescues `StandardError` which can make it harder to debug issues in an
development environment. The current workaround is to temporarily
comment out the `rescue` in your local development source.
......
......@@ -481,5 +481,5 @@ by an integer. For example: `users` would turn into `users0`
### Moving migrations from EE to CE
When migrations need to be moved from GitLab Enterprise Edition to GitLab Community Edition,
a migration file should be moved from `ee/db/{post_,}migrate` directory in the `gitlab-ee` project to `db/{post_,}migrate` directory in the `gitlab-ce` project. This way
a migration file should be moved from `ee/db/{post_,}migrate` directory in the `gitlab` project to `db/{post_,}migrate` directory in the `gitlab-foss` project. This way
the schema number remains intact, there is no need to modify old migrations, and proper columns, tables or data are added in the Community Edition.
......@@ -14,11 +14,11 @@ storage consumed by a group, and allow easy management.
## Problem
In GitLab, we update the project storage statistics through a
[callback](https://gitlab.com/gitlab-org/gitlab-foss/blob/v12.2.0.pre/app/models/project.rb#L90)
[callback](https://gitlab.com/gitlab-org/gitlab/blob/4ab54c2233e91f60a80e5b6fa2181e6899fdcc3e/app/models/project.rb#L97)
every time the project is saved.
The summary of those statistics per namespace is then retrieved
by [`Namespaces#with_statistics`](https://gitlab.com/gitlab-org/gitlab-foss/blob/v12.2.0.pre/app/models/namespace.rb#L70) scope. Analyzing this query we noticed that:
by [`Namespaces#with_statistics`](https://gitlab.com/gitlab-org/gitlab/blob/4ab54c2233e91f60a80e5b6fa2181e6899fdcc3e/app/models/namespace.rb#L70) scope. Analyzing this query we noticed that:
- It takes up to `1.2` seconds for namespaces with over `15k` projects.
- It can't be analyzed with [ChatOps](chatops_on_gitlabcom.md), as it times out.
......
......@@ -8,7 +8,7 @@ Prevent submitting forms with no changes.
Currently handles `input`, `textarea` and `select` elements.
Also, see [the code](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/app/assets/javascripts/dirty_submit/)
Also, see [the code](https://gitlab.com/gitlab-org/gitlab/blob/master/app/assets/javascripts/dirty_submit/)
within the GitLab project.
## Usage
......
......@@ -2,7 +2,7 @@
## Adding to the library
We strive to support the 2-4 most important metrics for each common system service that supports Prometheus. If you are looking for support for a particular exporter which has not yet been added to the library, additions can be made [to the `common_metrics.yml`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/config/prometheus/common_metrics.yml) file.
We strive to support the 2-4 most important metrics for each common system service that supports Prometheus. If you are looking for support for a particular exporter which has not yet been added to the library, additions can be made [to the `common_metrics.yml`](https://gitlab.com/gitlab-org/gitlab/blob/master/config/prometheus/common_metrics.yml) file.
### Query identifier
......
......@@ -2,7 +2,7 @@
QueryRecorder is a tool for detecting the [N+1 queries problem](https://guides.rubyonrails.org/active_record_querying.html#eager-loading-associations) from tests.
> Implemented in [spec/support/query_recorder.rb](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/spec/support/helpers/query_recorder.rb) via [9c623e3e](https://gitlab.com/gitlab-org/gitlab-foss/commit/9c623e3e5d7434f2e30f7c389d13e5af4ede770a)
> Implemented in [spec/support/query_recorder.rb](https://gitlab.com/gitlab-org/gitlab/blob/master/spec/support/helpers/query_recorder.rb) via [9c623e3e](https://gitlab.com/gitlab-org/gitlab-foss/commit/9c623e3e5d7434f2e30f7c389d13e5af4ede770a)
As a rule, merge requests [should not increase query counts](merge_request_performance_guidelines.md#query-counts). If you find yourself adding something like `.includes(:author, :assignee)` to avoid having `N+1` queries, consider using QueryRecorder to enforce this with a test. Without this, a new feature which causes an additional model to be accessed will silently reintroduce the problem.
......
......@@ -57,9 +57,9 @@ client or other software requires something different.
Examples:
```
gitlab-org/gitlab-ce/-/activity
gitlab-org/gitlab-ce/-/jobs/123
gitlab-org/gitlab-ce/-/settings/repository
gitlab-org/gitlab/-/activity
gitlab-org/gitlab/-/jobs/123
gitlab-org/gitlab/-/settings/repository
gitlab-org/serverless/runtimes/-/settings/repository
```
......
......@@ -52,7 +52,7 @@ graph LR
A1 -.->|1. Triggers an omnibus-gitlab pipeline and wait for it to be done| A2
B2[`Trigger-qa` stage<br>`Trigger:qa-test` job] -.->|2. Triggers a gitlab-qa pipeline and wait for it to be done| A3
subgraph "gitlab-ce/ee pipeline"
subgraph "gitlab-foss/gitlab pipeline"
A1[`test` stage<br>`package-and-qa-manual` job]
end
......@@ -135,8 +135,7 @@ Continued reading:
You can ask question in the `#quality` channel on Slack (GitLab internal) or
you can find an issue you would like to work on in
[the `gitlab-ce` issue tracker][gitlab-ce-issues],
[the `gitlab-ee` issue tracker][gitlab-ce-issues], or
[the `gitlab` issue tracker][gitlab-issues], or
[the `gitlab-qa` issue tracker][gitlab-qa-issues].
[omnibus-gitlab]: https://gitlab.com/gitlab-org/omnibus-gitlab
......@@ -147,8 +146,7 @@ you can find an issue you would like to work on in
[review-apps]: ../review_apps.md
[gitlab-qa-architecture]: https://gitlab.com/gitlab-org/gitlab-qa/blob/master/docs/architecture.md
[gitlab-qa-issues]: https://gitlab.com/gitlab-org/gitlab-qa/issues?label_name%5B%5D=new+scenario
[gitlab-ce-issues]: https://gitlab.com/gitlab-org/gitlab-foss/issues?label_name[]=QA&label_name[]=test
[gitlab-ee-issues]: https://gitlab.com/gitlab-org/gitlab/issues?label_name[]=QA&label_name[]=test
[gitlab-issues]: https://gitlab.com/gitlab-org/gitlab/issues?label_name[]=QA&label_name[]=test
[test environment orchestration scenarios]: https://gitlab.com/gitlab-org/gitlab-qa/tree/master/lib/gitlab/qa/scenario
[instance-level scenarios]: https://gitlab.com/gitlab-org/gitlab-foss/tree/master/qa/qa/specs/features
[Page objects documentation]: https://gitlab.com/gitlab-org/gitlab/tree/master/qa/qa/page/README.md
......
......@@ -24,7 +24,7 @@ If you don't exactly understand what we mean by **not everything needs to happen
### 0. Are end-to-end tests needed?
At GitLab we respect the [test pyramid](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/development/testing_guide/testing_levels.md), and so, we recommend you check the code coverage of a specific feature before writing end-to-end tests, for both [CE](https://gitlab-org.gitlab.io/gitlab-ce/coverage-ruby/#_AllFiles) and [EE](https://gitlab-org.gitlab.io/gitlab-ee/coverage-ruby/#_AllFiles) projects.
At GitLab we respect the [test pyramid](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/development/testing_guide/testing_levels.md), and so, we recommend you check the code coverage of a specific feature before writing end-to-end tests, for both [CE](https://gitlab-org.gitlab.io/gitlab-foss/coverage-ruby/#_AllFiles) and [EE](https://gitlab-org.gitlab.io/gitlab/coverage-ruby/#_AllFiles) projects.
Sometimes you may notice that there is already good coverage in other test levels, and we can stay confident that if we break a feature, we will still have quick feedback about it, even without having end-to-end tests.
......
......@@ -51,7 +51,7 @@ is detected in any other branch (`flaky-examples-check` job). In the future, the
This was originally implemented in: <https://gitlab.com/gitlab-org/gitlab-foss/merge_requests/13021>.
[rspec-retry]: https://github.com/NoRedInk/rspec-retry
[`spec/spec_helper.rb`]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/spec/spec_helper.rb
[`spec/spec_helper.rb`]: https://gitlab.com/gitlab-org/gitlab/blob/master/spec/spec_helper.rb
## Problems we had in the past at GitLab
......
......@@ -38,7 +38,7 @@ which could arise (especially with testing against browser specific features).
- Jest runs in a Node.js environment, not in a browser. Support for running Jest tests in a browser [is planned](https://gitlab.com/gitlab-org/gitlab-foss/issues/58205).
- Because Jest runs in a Node.js environment, it uses [jsdom](https://github.com/jsdom/jsdom) by default. See also its [limitations](#limitations-of-jsdom) below.
- Jest does not have access to Webpack loaders or aliases.
The aliases used by Jest are defined in its [own config](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/jest.config.js).
The aliases used by Jest are defined in its [own config](https://gitlab.com/gitlab-org/gitlab/blob/master/jest.config.js).
- All calls to `setTimeout` and `setInterval` are mocked away. See also [Jest Timer Mocks](https://jestjs.io/docs/en/timer-mocks).
- `rewire` is not required because Jest supports mocking modules. See also [Manual Mocks](https://jestjs.io/docs/en/manual-mocks).
- No [context object](https://jasmine.github.io/tutorials/your_first_suite#section-The_%3Ccode%3Ethis%3C/code%3E_keyword) is passed to tests in Jest.
......@@ -67,13 +67,13 @@ Running `yarn jest-debug` will run Jest in debug mode, allowing you to debug/ins
### Timeout error
The default timeout for Jest is set in
[`/spec/frontend/test_setup.js`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/spec/frontend/test_setup.js).
[`/spec/frontend/test_setup.js`](https://gitlab.com/gitlab-org/gitlab/blob/master/spec/frontend/test_setup.js).
If your test exceeds that time, it will fail.
If you cannot improve the performance of the tests, you can increase the timeout
for a specific test using
[`setTestTimeout`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/spec/frontend/helpers/timeout.js).
[`setTestTimeout`](https://gitlab.com/gitlab-org/gitlab/blob/master/spec/frontend/helpers/timeout.js).
```javascript
import { setTestTimeout } from 'helpers/timeout';
......@@ -388,7 +388,7 @@ it('renders something', done => {
##### `setTimeout()` / `setInterval()` in application
If the application itself is waiting for some time, mock await the waiting. In Jest this is already
[done by default](https://gitlab.com/gitlab-org/gitlab-foss/blob/a2128edfee799e49a8732bfa235e2c5e14949c68/jest.config.js#L47)
[done by default](https://gitlab.com/gitlab-org/gitlab/blob/a2128edfee799e49a8732bfa235e2c5e14949c68/jest.config.js#L47)
(see also [Jest Timer Mocks](https://jestjs.io/docs/en/timer-mocks)). In Karma you can use the
[Jasmine mock clock](https://jasmine.github.io/api/2.9/Clock.html).
......@@ -1048,7 +1048,7 @@ testAction(
);
```
Check an example in [spec/javascripts/ide/stores/actions_spec.jsspec/javascripts/ide/stores/actions_spec.js](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/spec/javascripts/ide/stores/actions_spec.js).
Check an example in [spec/javascripts/ide/stores/actions_spec.jsspec/javascripts/ide/stores/actions_spec.js](https://gitlab.com/gitlab-org/gitlab/blob/master/spec/javascripts/ide/stores/actions_spec.js).
### Vue Helper: `mountComponent`
......
......@@ -16,23 +16,23 @@ graph TD
review-build-cng -->|once the `review-build-cng` job is done| review-deploy
review-deploy -->|once the `review-deploy` job is done| review-qa-smoke
subgraph "1. gitlab-ce/ee `prepare` stage"
subgraph "1. gitlab-foss/gitlab `prepare` stage"
build-qa-image
end
subgraph "2. gitlab-ce/ee `test` stage"
subgraph "2. gitlab-foss/gitlab `test` stage"
gitlab:assets:compile
end
subgraph "3. gitlab-ce/ee `review-prepare` stage"
subgraph "3. gitlab-foss/gitlab `review-prepare` stage"
review-build-cng
end
subgraph "4. gitlab-ce/ee `review` stage"
subgraph "4. gitlab-foss/gitlab `review` stage"
review-deploy["review-deploy<br><br>Helm deploys the Review App using the Cloud<br/>Native images built by the CNG-mirror pipeline.<br><br>Cloud Native images are deployed to the `review-apps-ce` or `review-apps-ee`<br>Kubernetes (GKE) cluster, in the GCP `gitlab-review-apps` project."]
end
subgraph "5. gitlab-ce/ee `qa` stage"
subgraph "5. gitlab-foss/gitlab `qa` stage"
review-qa-smoke[review-qa-smoke<br><br>gitlab-qa runs the smoke suite against the Review App.]
end
......@@ -193,7 +193,7 @@ The following items may help diagnose this:
- [Instance Group size in GCP](https://console.cloud.google.com/compute/instanceGroups/details/us-central1-b/gke-review-apps-ee-preemp-n1-standard-8affc0f5-grp?project=gitlab-review-apps&tab=monitoring&graph=GCE_SIZE&duration=P30D) - aids in identifying load spikes on the cluster. Kubernetes will add nodes up to 220 based on total resource requests.
- `kubectl top nodes --sort-by=cpu` - can identify if node spikes are common or load on specific nodes which may get rebalanced by the Kubernetes scheduler.
- `kubectl top pods --sort-by=cpu` -
- [K9s] - K9s is a powerful command line dashboard which allows you to filter by labels. This can help identify trends with apps exceeding the [review-app resource requests](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/scripts/review_apps/base-config.yaml). Kubernetes will schedule pods to nodes based on resource requests and allow for CPU usage up to the limits.
- [K9s] - K9s is a powerful command line dashboard which allows you to filter by labels. This can help identify trends with apps exceeding the [review-app resource requests](https://gitlab.com/gitlab-org/gitlab/blob/master/scripts/review_apps/base-config.yaml). Kubernetes will schedule pods to nodes based on resource requests and allow for CPU usage up to the limits.
- In K9s you can sort or add filters by typing the `/` character
- `-lrelease=<review-app-slug>` - filters down to all pods for a release. This aids in determining what is having issues in a single deployment
- `-lapp=<app>` - filters down to all pods for a specific app. This aids in determining resource usage by app.
......@@ -311,8 +311,8 @@ find a way to limit it to only us.**
[review-apps-ee]: https://console.cloud.google.com/kubernetes/clusters/details/us-central1-b/review-apps-ee?project=gitlab-review-apps
[review-apps.sh]: https://gitlab.com/gitlab-org/gitlab/blob/master/scripts/review_apps/review-apps.sh
[automated_cleanup.rb]: https://gitlab.com/gitlab-org/gitlab/blob/master/scripts/review_apps/automated_cleanup.rb
[Auto-DevOps.gitlab-ci.yml]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml
[gitlab-ci-yml]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/.gitlab-ci.yml
[Auto-DevOps.gitlab-ci.yml]: https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml
[gitlab-ci-yml]: https://gitlab.com/gitlab-org/gitlab/blob/master/.gitlab-ci.yml
[gitlab-k8s-integration]: ../../user/project/clusters/index.md
[K9s]: https://github.com/derailed/k9s
[password-bug]: https://gitlab.com/gitlab-org/gitlab-foss/issues/53621
......
......@@ -99,7 +99,7 @@ Formal definitions:
- <https://en.wikipedia.org/wiki/White-box_testing>
These kind of tests ensure the GitLab *Rails* application (i.e.
`gitlab-ce`/`gitlab-ee`) works as expected from a *browser* point of view.
`gitlab-foss`/`gitlab`) works as expected from a *browser* point of view.
Note that:
......
......@@ -209,8 +209,8 @@ This is the more advanced acceleration technique we have in place.
Workhorse asks rails for temporary pre-signed object storage URLs and directly uploads to object storage.
In this setup an extra rails route needs to be implemented in order to handle authorization,
you can see an example of this in [`Projects::LfsStorageController`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/app/controllers/projects/lfs_storage_controller.rb)
and [its routes](https://gitlab.com/gitlab-org/gitlab-foss/blob/v12.2.0/config/routes/git_http.rb#L31-32).
you can see an example of this in [`Projects::LfsStorageController`](https://gitlab.com/gitlab-org/gitlab/blob/cc723071ad337573e0360a879cbf99bc4fb7adb9/app/controllers/projects/lfs_storage_controller.rb)
and [its routes](https://gitlab.com/gitlab-org/gitlab/blob/cc723071ad337573e0360a879cbf99bc4fb7adb9/config/routes/git_http.rb#L31-32).
**note:** this will fallback to _Workhorse disk acceleration_ when object storage is not enabled in the gitlab instance. The answer to the `/authorize` call will only contain a file system path.
......
......@@ -2,7 +2,9 @@
We developed a number of utilities to ease development.
## [`MergeHash`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/gitlab/utils/merge_hash.rb)
## `MergeHash`
Refer to: <https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/utils/merge_hash.rb>:
- Deep merges an array of hashes:
......@@ -45,7 +47,9 @@ We developed a number of utilities to ease development.
[:hello, "world", :this, :crushes, "an entire", "hash"]
```
## [`Override`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/gitlab/utils/override.rb)
## `Override`
Refer to <https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/utils/override.rb>:
- This utility could help us check if a particular method would override
another method or not. It has the same idea of Java's `@Override` annotation
......@@ -90,7 +94,9 @@ We developed a number of utilities to ease development.
end
```
## [`StrongMemoize`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/gitlab/utils/strong_memoize.rb)
## `StrongMemoize`
Refer to <https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/utils/strong_memoize.rb>:
- Memoize the value even if it is `nil` or `false`.
......@@ -136,7 +142,9 @@ We developed a number of utilities to ease development.
Find.new.clear_memoization(:result)
```
## [`RequestCache`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/gitlab/cache/request_cache.rb)
## `RequestCache`
Refer to <https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/cache/request_cache.rb>.
This module provides a simple way to cache values in RequestStore,
and the cache key would be based on the class name, method name,
......
......@@ -90,7 +90,7 @@ your GitLab installation with the Community Edition's remote, fetch the latest
changes, and checkout the latest stable branch:
```sh
git remote set-url origin git@gitlab.com:gitlab-org/gitlab-ce.git
git remote set-url origin git@gitlab.com:gitlab-org/gitlab-foss.git
git fetch --all
git checkout 8-x-stable
```
......
......@@ -110,8 +110,8 @@ and paste in your command line.
As an example, consider this repository path:
- HTTPS: `https://gitlab.com/gitlab-org/gitlab-foss.git`
- SSH: `git@gitlab.com:gitlab-org/gitlab-ce.git`
- HTTPS: `https://gitlab.com/gitlab-org/gitlab.git`
- SSH: `git@gitlab.com:gitlab-org/gitlab.git`
To get started, open a terminal window in the directory you wish to clone the repository
files into, and run one of the following commands.
......@@ -119,13 +119,13 @@ files into, and run one of the following commands.
Clone via HTTPS:
```bash
git clone https://gitlab.com/gitlab-org/gitlab-foss.git
git clone https://gitlab.com/gitlab-org/gitlab.git
```
Clone via SSH:
```bash
git clone git@gitlab.com:gitlab-org/gitlab-ce.git
git clone git@gitlab.com:gitlab-org/gitlab.git
```
Both commands will download a copy of the files in a folder named after the project's
......
......@@ -137,7 +137,7 @@ you can [disable Sign-Ins in the admin panel](omniauth.md#enable-or-disable-sign
[init-oauth]: omniauth.md#initial-omniauth-configuration
[bb-import]: ../workflow/importing/import_projects_from_bitbucket.md
[bb-old]: https://gitlab.com/gitlab-org/gitlab-foss/blob/8-14-stable/doc/integration/bitbucket.md
[bb-old]: https://gitlab.com/gitlab-org/gitlab/blob/8-14-stable/doc/integration/bitbucket.md
[bitbucket-docs]: https://confluence.atlassian.com/bitbucket/use-the-ssh-protocol-with-bitbucket-cloud-221449711.html#UsetheSSHprotocolwithBitbucketCloud-KnownhostorBitbucket%27spublickeyfingerprints
[reconfigure GitLab]: ../administration/restart_gitlab.md#omnibus-gitlab-reconfigure
[restart]: ../administration/restart_gitlab.md#installations-from-source
......@@ -46,7 +46,7 @@ sudo chmod 0600 /etc/http.keytab
For source installations, make sure the `kerberos` gem group
[has been installed](../install/installation.md#install-gems).
1. Edit the `kerberos` section of [`gitlab.yml`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/config/gitlab.yml.example) to enable Kerberos ticket-based
1. Edit the `kerberos` section of [`gitlab.yml`](https://gitlab.com/gitlab-org/gitlab/blob/master/config/gitlab.yml.example) to enable Kerberos ticket-based
authentication. In most cases, you only need to enable Kerberos and specify
the location of the keytab:
......@@ -153,7 +153,7 @@ keep offering only `basic` authentication.
listen [::]:8443 ipv6only=on ssl;
```
1. Update the `kerberos` section of [`gitlab.yml`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/config/gitlab.yml.example):
1. Update the `kerberos` section of [`gitlab.yml`](https://gitlab.com/gitlab-org/gitlab/blob/master/config/gitlab.yml.example):
```yaml
kerberos:
......@@ -203,7 +203,7 @@ remove the OmniAuth provider named `kerberos` from your `gitlab.yml` /
**For installations from source**
1. Edit [`gitlab.yml`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/config/gitlab.yml.example) and remove the `- { name: 'kerberos' }` line under omniauth
1. Edit [`gitlab.yml`](https://gitlab.com/gitlab-org/gitlab/blob/master/config/gitlab.yml.example) and remove the `- { name: 'kerberos' }` line under omniauth
providers:
```yaml
......
......@@ -192,7 +192,7 @@ from the Omniauth provider's documentation.
sudo service gitlab stop
```
- Add the gem to your [Gemfile](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/Gemfile):
- Add the gem to your [Gemfile](https://gitlab.com/gitlab-org/gitlab/blob/master/Gemfile):
```sh
gem "omniauth-your-auth-provider"
......
......@@ -277,7 +277,7 @@ Starting with GitLab 7.4 you can let the backup script upload the '.tar' file it
It uses the [Fog library](http://fog.io/) to perform the upload.
In the example below we use Amazon S3 for storage, but Fog also lets you use
[other storage providers](http://fog.io/storage/). GitLab
[imports cloud drivers](https://gitlab.com/gitlab-org/gitlab-foss/blob/30f5b9a5b711b46f1065baf755e413ceced5646b/Gemfile#L88)
[imports cloud drivers](https://gitlab.com/gitlab-org/gitlab/blob/30f5b9a5b711b46f1065baf755e413ceced5646b/Gemfile#L88)
for AWS, Google, OpenStack Swift, Rackspace and Aliyun as well. A local driver is
[also available](#uploading-to-locally-mounted-shares).
......
......@@ -19,7 +19,7 @@ bundle exec rake gitlab:cleanup:dirs RAILS_ENV=production
DANGER: **Danger:**
The following task does not currently work as expected.
The use will probably mark more existing repositories as orphaned.
For more information, see the [issue](https://gitlab.com/gitlab-org/gitlab-ee/issues/24633).
For more information, see the [issue](https://gitlab.com/gitlab-org/gitlab/issues/24633).
Rename repositories from all repository storage paths if they don't exist in GitLab database.
The repositories get a `+orphaned+TIMESTAMP` suffix so that they cannot block new repositories from being created.
......
......@@ -100,7 +100,7 @@ the Git repository's config file. This section is formatted as follows:
```
[gitlab]
fullpath = gitlab-org/gitlab-ce
fullpath = gitlab-org/gitlab
```
However, existing repositories were not migrated to include this path.
......@@ -129,7 +129,7 @@ Until then, you may wish to manually migrate repositories yourself. You can use
to do so. In a Rails console session, run the following to migrate a project:
```
project = Project.find_by_full_path('gitlab-org/gitlab-ce')
project = Project.find_by_full_path('gitlab-org/gitlab')
project.write_repository_config
```
......
......@@ -60,7 +60,7 @@ vulnerability.
- Tenable Network Security, Inc. ["Transport Layer Security (TLS) Protocol CRIME Vulnerability"][nessus]
- Wikipedia contributors, ["CRIME"][wiki-crime] Wikipedia, The Free Encyclopedia
[source-nginx]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/support/nginx/gitlab-ssl
[source-nginx]: https://gitlab.com/gitlab-org/gitlab/blob/master/lib/support/nginx/gitlab-ssl
[omnibus-nginx]: https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/templates/default/nginx-gitlab-http.conf.erb
[ngx-spdy]: http://nginx.org/en/docs/http/ngx_http_spdy_module.html
[nessus]: https://www.tenable.com/plugins/index.php?view=single&id=62565
......
......@@ -1265,7 +1265,7 @@ curl --data "value=true" --header "PRIVATE-TOKEN: personal_access_token" https:/
[review-app]: ../../ci/review_apps/index.md
[container-registry]: ../../user/packages/container_registry/index.md
[postgresql]: https://www.postgresql.org/
[Auto DevOps template]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml
[Auto DevOps template]: https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml
[ee]: https://about.gitlab.com/pricing/
[ce-21955]: https://gitlab.com/gitlab-org/gitlab-foss/merge_requests/21955
[ce-19507]: https://gitlab.com/gitlab-org/gitlab-foss/merge_requests/19507
......
......@@ -274,7 +274,7 @@ longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let GitLab Workhorse listen on a TCP port. You can do this
via [`/etc/default/gitlab`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/support/init.d/gitlab.default.example#L38).
via [`/etc/default/gitlab`](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/support/init.d/gitlab.default.example#L38).
#### SMTP configuration
......@@ -400,7 +400,7 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/support/init.d/gitlab.default.example
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/config/initializers/smtp_settings.rb.sample#L13
[yaml]: https://gitlab.com/gitlab-org/gitlab/blob/master/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab/blob/master/lib/support/init.d/gitlab.default.example
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab/blob/master/config/initializers/smtp_settings.rb.sample#L13
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
# Cycle Analytics
> - Introduced prior to GitLab 12.3 at the project level.
> - [Introduced](https://gitlab.com/gitlab-org/gitlab-ee/issues/12077) in [GitLab Premium](https://about.gitlab.com/pricing/) 12.3 at the group level.
> - [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/12077) in [GitLab Premium](https://about.gitlab.com/pricing/) 12.3 at the group level.
Cycle Analytics measures the time spent to go from an [idea to production] - also known
as cycle time - for each of your projects. Cycle Analytics displays the median time for an idea to
......
# Productivity Analytics **(PREMIUM)**
> [Introduced](https://gitlab.com/gitlab-org/gitlab-ee/issues/12079) in [GitLab Premium](https://about.gitlab.com/pricing/) 12.3 (enabled by feature flags `productivity_analytics`).
> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/12079) in [GitLab Premium](https://about.gitlab.com/pricing/) 12.3 (enabled by feature flags `productivity_analytics`).
Track development velocity with Productivity Analytics.
......
......@@ -86,7 +86,7 @@ NOTE: **Note:**
The
[jetstack/cert-manager](https://github.com/jetstack/cert-manager)
chart is used to install this application with a
[`values.yaml`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/vendor/cert_manager/values.yaml)
[`values.yaml`](https://gitlab.com/gitlab-org/gitlab/blob/master/vendor/cert_manager/values.yaml)
file. Prior to GitLab 12.3,
the [stable/cert-manager](https://github.com/helm/charts/tree/master/stable/cert-manager)
chart was used.
......@@ -109,7 +109,7 @@ NOTE: **Note:**
The
[runner/gitlab-runner](https://gitlab.com/gitlab-org/charts/gitlab-runner)
chart is used to install this application with a
[`values.yaml`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/vendor/runner/values.yaml)
[`values.yaml`](https://gitlab.com/gitlab-org/gitlab/blob/master/vendor/runner/values.yaml)
file.
### Ingress
......@@ -126,7 +126,7 @@ NOTE: **Note:**
The
[stable/nginx-ingress](https://github.com/helm/charts/tree/master/stable/nginx-ingress)
chart is used to install this application with a
[`values.yaml`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/vendor/ingress/values.yaml)
[`values.yaml`](https://gitlab.com/gitlab-org/gitlab/blob/master/vendor/ingress/values.yaml)
file.
#### Modsecurity Application Firewall
......@@ -188,7 +188,7 @@ NOTE: **Note:**
The
[jupyter/jupyterhub](https://jupyterhub.github.io/helm-chart/)
chart is used to install this application with a
[`values.yaml`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/vendor/jupyter/values.yaml)
[`values.yaml`](https://gitlab.com/gitlab-org/gitlab/blob/master/vendor/jupyter/values.yaml)
file.
#### Jupyter Git Integration
......@@ -255,7 +255,7 @@ NOTE: **Note:**
The
[stable/prometheus](https://github.com/helm/charts/tree/master/stable/prometheus)
chart is used to install this application with a
[`values.yaml`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/vendor/prometheus/values.yaml)
[`values.yaml`](https://gitlab.com/gitlab-org/gitlab/blob/master/vendor/prometheus/values.yaml)
file.
## Upgrading applications
......@@ -281,7 +281,7 @@ To upgrade an application:
NOTE: **Note:**
Upgrades will reset values back to the values built into the `runner`
chart plus the values set by
[`values.yaml`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/vendor/runner/values.yaml)
[`values.yaml`](https://gitlab.com/gitlab-org/gitlab/blob/master/vendor/runner/values.yaml)
## Uninstalling applications
......
# Cluster Environments **(PREMIUM)**
> [Introduced](https://gitlab.com/gitlab-org/gitlab-ee/issues/13392) in [GitLab Premium](https://about.gitlab.com/pricing/) 12.3.
> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/13392) in [GitLab Premium](https://about.gitlab.com/pricing/) 12.3.
Cluster environments provide a consolidated view of which CI [environments](../../ci/environments.md) are
deployed to the Kubernetes cluster and it:
......@@ -14,7 +14,7 @@ NOTE: **Note:**
Cluster environments are only available for
[group-level clusters](../group/clusters/index.md).
Support for [instance-level](../instance/clusters/index.md) clusters is
[planned](https://gitlab.com/gitlab-org/gitlab-ce/issues/63985).
[planned](https://gitlab.com/gitlab-org/gitlab-foss/issues/63985).
With cluster environments, you can gain insight into:
......
......@@ -214,10 +214,10 @@ A project alias can be only created via API and only by GitLab administrators.
Follow the [Project Aliases API documentation](../../api/project_aliases.md) for
more details.
Once an alias has been created for a project (e.g., an alias `gitlab-ce` for the
project `https://gitlab.com/gitlab-org/gitlab-foss`), the repository can be cloned
using the alias (e.g `git clone git@gitlab.com:gitlab-ce.git` instead of
`git clone git@gitlab.com:gitlab-org/gitlab-ce.git`).
Once an alias has been created for a project (e.g., an alias `gitlab` for the
project `https://gitlab.com/gitlab-org/gitlab`), the repository can be cloned
using the alias (e.g `git clone git@gitlab.com:gitlab.git` instead of
`git clone git@gitlab.com:gitlab-org/gitlab.git`).
## Project APIs
......
# Generic alerts integration **(ULTIMATE)**
> [Introduced](https://gitlab.com/gitlab-org/gitlab-ee/issues/13203) in [GitLab Ultimate](https://about.gitlab.com/pricing/) 12.3.
> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/13203) in [GitLab Ultimate](https://about.gitlab.com/pricing/) 12.3.
GitLab can accept alerts from any source via a generic webhook receiver.
When you set up the generic alerts integration, a unique endpoint will
......
......@@ -53,11 +53,11 @@ The only difference with the [manually configurable Slack slash commands][slack-
is that all the commands should be prefixed with the `/gitlab` keyword.
We are working on making this configurable in the future.
For example, to show the issue number `1001` under the `gitlab-org/gitlab-ce`
For example, to show the issue number `1001` under the `gitlab-org/gitlab`
project, you would do:
```
/gitlab gitlab-org/gitlab-ce issue show 1001
/gitlab gitlab-org/gitlab issue show 1001
```
[slack-docs]: https://get.slack.help/hc/en-us/articles/202035138-Adding-apps-to-your-team
......
......@@ -205,4 +205,4 @@ authenticate with the Jira site. You will need to log in to your Jira instance
and complete the CAPTCHA.
[services-templates]: services_templates.md
[jira-repo-old-docs]: https://gitlab.com/gitlab-org/gitlab-foss/blob/8-13-stable/doc/project_services/jira.md
[jira-repo-old-docs]: https://gitlab.com/gitlab-org/gitlab/blob/8-13-stable/doc/project_services/jira.md
......@@ -175,7 +175,7 @@ performance:
performance: performance.json
```
A complete example can be found in our [Auto DevOps CI YML](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml).
A complete example can be found in our [Auto DevOps CI YML](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml).
### Previous job definitions
......
......@@ -97,9 +97,9 @@ merge.
## Limitations
- API support: [gitlab-ee#12551](https://gitlab.com/gitlab-org/gitlab/issues/12551)
- Dependencies are not preserved across project export/import: [gitlab-ee#12549](https://gitlab.com/gitlab-org/gitlab/issues/12549)
- Complex merge order dependencies are not supported: [gitlab-ee#11393](https://gitlab.com/gitlab-org/gitlab/issues/11393)
- API support: [gitlab#12551](https://gitlab.com/gitlab-org/gitlab/issues/12551)
- Dependencies are not preserved across project export/import: [gitlab#12549](https://gitlab.com/gitlab-org/gitlab/issues/12549)
- Complex merge order dependencies are not supported: [gitlab#11393](https://gitlab.com/gitlab-org/gitlab/issues/11393)
The last item merits a little more explanation. Dependencies between merge
requests can be described as a graph of relationships. The simplest possible
......
......@@ -123,18 +123,18 @@ https://example.com/<namespace>/<project>/-/jobs/artifacts/<ref>/raw/<path_to_fi
```
For example, to download the latest artifacts of the job named `coverage` of
the `master` branch of the `gitlab-ce` project that belongs to the `gitlab-org`
the `master` branch of the `gitlab` project that belongs to the `gitlab-org`
namespace, the URL would be:
```
https://gitlab.com/gitlab-org/gitlab-foss/-/jobs/artifacts/master/download?job=coverage
https://gitlab.com/gitlab-org/gitlab/-/jobs/artifacts/master/download?job=coverage
```
To download the file `coverage/index.html` from the same
artifacts use the following URL:
```
https://gitlab.com/gitlab-org/gitlab-foss/-/jobs/artifacts/master/raw/coverage/index.html?job=coverage
https://gitlab.com/gitlab-org/gitlab/-/jobs/artifacts/master/raw/coverage/index.html?job=coverage
```
There is also a URL to browse the latest job artifacts:
......@@ -146,7 +146,7 @@ https://example.com/<namespace>/<project>/-/jobs/artifacts/<ref>/browse?job=<job
For example:
```
https://gitlab.com/gitlab-org/gitlab-foss/-/jobs/artifacts/master/browse?job=coverage
https://gitlab.com/gitlab-org/gitlab/-/jobs/artifacts/master/browse?job=coverage
```
There is also a URL to specific files, including html files that
......@@ -160,7 +160,7 @@ For example, when a job `coverage` creates the artifact `htmlcov/index.html`,
you can access it at:
```
https://gitlab.com/gitlab-org/gitlab-foss/-/jobs/artifacts/master/file/htmlcov/index.html?job=coverage
https://gitlab.com/gitlab-org/gitlab/-/jobs/artifacts/master/file/htmlcov/index.html?job=coverage
```
The latest builds are also exposed in the UI in various places. Specifically,
......
......@@ -166,16 +166,16 @@ for details about the pipelines security model.
**9.2**
- Allow deletion of protected branches via the web interface [gitlab-org/gitlab-ce#21393][ce-21393]
- Allow deletion of protected branches via the web interface [gitlab-org/gitlab-foss#21393][ce-21393]
**8.11**
- Allow creating protected branches that can't be pushed to [gitlab-org/gitlab-ce!5081][ce-5081]
- Allow creating protected branches that can't be pushed to [gitlab-org/gitlab-foss!5081][ce-5081]
**8.10**
- Allow developers to merge into a protected branch without having push access [gitlab-org/gitlab-ce!4892][ce-4892]
- Allow specifying protected branches using wildcards [gitlab-org/gitlab-ce!4665][ce-4665]
- Allow developers to merge into a protected branch without having push access [gitlab-org/gitlab-foss!4892][ce-4892]
- Allow specifying protected branches using wildcards [gitlab-org/gitlab-foss!4665][ce-4665]
[ce-4665]: https://gitlab.com/gitlab-org/gitlab-foss/merge_requests/4665 "Allow specifying protected branches using wildcards"
[ce-4892]: https://gitlab.com/gitlab-org/gitlab-foss/merge_requests/4892 "Allow developers to merge into a protected branch without having push access"
......
......@@ -64,8 +64,8 @@ The following quick actions are applicable to descriptions, discussions and thre
| `/create_merge_request <branch name>` | ✓ | | | Create a new merge request starting from the current issue |
| `/relate #issue1 #issue2` | ✓ | | | Mark issues as related **(STARTER)** |
| `/move <path/to/project>` | ✓ | | | Move this issue to another project |
| `/zoom <Zoom URL>` | ✓ | | | Add Zoom meeting to this issue. ([Introduced in GitLab 12.3](https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/16609) enabled by feature flag `issue_zoom_integration`) |
| `/remove_zoom` | ✓ | | | Remove Zoom meeting from this issue. ([Introduced in GitLab 12.3](https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/16609) enabled by feature flag `issue_zoom_integration`) |
| `/zoom <Zoom URL>` | ✓ | | | Add Zoom meeting to this issue. ([Introduced in GitLab 12.3](https://gitlab.com/gitlab-org/gitlab/merge_requests/16609) enabled by feature flag `issue_zoom_integration`) |
| `/remove_zoom` | ✓ | | | Remove Zoom meeting from this issue. ([Introduced in GitLab 12.3](https://gitlab.com/gitlab-org/gitlab/merge_requests/16609) enabled by feature flag `issue_zoom_integration`) |
| `/target_branch <local branch name>` | | ✓ | | Set target branch |
| `/wip` | | ✓ | | Toggle the Work In Progress status |
| `/approve` | | ✓ | | Approve the merge request |
......
......@@ -88,4 +88,4 @@ These group names are unavailable as subgroup names:
- \-
[reserved]: https://gitlab.com/gitlab-org/gitlab-foss/blob/master/lib/gitlab/path_regex.rb
[reserved]: https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/path_regex.rb
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment