Commit cdbf0ab6 authored by Marcel Amirault's avatar Marcel Amirault Committed by Russell Dickenson

Fix redirected and 404ing links

Fix links that are 404ing and redirecting to the
correct latest links
parent 3d2c23fb
......@@ -58,7 +58,7 @@ this method only supports replies, and not the other features of [incoming email
## Set it up
If you want to use Gmail / Google Apps for incoming emails, make sure you have
[IMAP access enabled](https://support.google.com/mail/troubleshooter/1668960?hl=en#ts=1665018)
[IMAP access enabled](https://support.google.com/mail/answer/7126229)
and [allowed less secure apps to access the account](https://support.google.com/accounts/answer/6010255)
or [turn-on 2-step validation](https://support.google.com/accounts/answer/185839)
and use [an application password](https://support.google.com/mail/answer/185833).
......
......@@ -60,8 +60,8 @@ guides document the necessary steps for a selection of popular reverse proxies:
- [Apache](https://httpd.apache.org/docs/2.4/mod/mod_proxy_wstunnel.html)
- [NGINX](https://www.nginx.com/blog/websocket-nginx/)
- [HAProxy](http://blog.haproxy.com/2012/11/07/websockets-load-balancing-with-haproxy/)
- [Varnish](https://www.varnish-cache.org/docs/4.1/users-guide/vcl-example-websockets.html)
- [HAProxy](https://www.haproxy.com/blog/websockets-load-balancing-with-haproxy/)
- [Varnish](https://varnish-cache.org/docs/4.1/users-guide/vcl-example-websockets.html)
Workhorse won't let WebSocket requests through to non-WebSocket endpoints, so
it's safe to enable support for these headers globally. If you'd rather had a
......
......@@ -148,7 +148,7 @@ For more information, please see our:
- [Subscription FAQ](https://about.gitlab.com/pricing/licensing-faq/).
- [Pricing page](https://about.gitlab.com/pricing/), which includes information
on our [true-up pricing policy](https://about.gitlab.com/handbook/product/pricing/#true-up-pricing)
on our [true-up pricing policy](https://about.gitlab.com/handbook/ceo/pricing/#true-up-pricing)
when adding more users other than at the time of purchase.
NOTE: **Note:**
......
......@@ -77,7 +77,7 @@ As Auto DevOps relies on many different components, it's good to have a basic
knowledge of the following:
- [Kubernetes](https://kubernetes.io/docs/home/)
- [Helm](https://docs.helm.sh/)
- [Helm](https://helm.sh/docs/)
- [Docker](https://docs.docker.com)
- [GitLab Runner](https://docs.gitlab.com/runner/)
- [Prometheus](https://prometheus.io/docs/introduction/overview/)
......@@ -124,7 +124,7 @@ To make full use of Auto DevOps, you will need:
- A [Kubernetes cluster][kubernetes-clusters] for the project.
- A load balancer. You can use NGINX Ingress by deploying it to your
Kubernetes cluster by either:
- Using the [`nginx-ingress`](https://github.com/kubernetes/charts/tree/master/stable/nginx-ingress) Helm chart.
- Using the [`nginx-ingress`](https://github.com/helm/charts/tree/master/stable/nginx-ingress) Helm chart.
- Installing the Ingress [GitLab Managed App](../../user/clusters/applications.md#ingress).
- **Prometheus** (for Auto Monitoring)
......@@ -172,7 +172,7 @@ and `1.2.3.4` is the IP address of your load balancer; generally NGINX
([see requirements](#requirements)). How to set up the DNS record is beyond
the scope of this document; you should check with your DNS provider.
Alternatively you can use free public services like [nip.io](http://nip.io)
Alternatively you can use free public services like [nip.io](https://nip.io)
which provide automatic wildcard DNS without any configuration. Just set the
Auto DevOps base domain to `1.2.3.4.nip.io`.
......
......@@ -25,7 +25,7 @@ Google account (for example, one that you use to access Gmail, Drive, etc.) or c
TIP: **Tip:**
Every new Google Cloud Platform (GCP) account receives [$300 in credit](https://console.cloud.google.com/freetrial),
and in partnership with Google, GitLab is able to offer an additional $200 for new GCP accounts to get started with GitLab's
Google Kubernetes Engine Integration. All you have to do is [follow this link](https://goo.gl/AaJzRW) and apply for credit.
Google Kubernetes Engine Integration. All you have to do is [follow this link](https://cloud.google.com/partners/partnercredit/?PCN=a0n60000006Vpz4AAC) and apply for credit.
## Creating a new project from a template
......
......@@ -169,7 +169,7 @@ For Cycle Analytics functionality introduced in GitLab 12.3 and later:
Learn more about Cycle Analytics in the following resources:
- [Cycle Analytics feature page](https://about.gitlab.com/features/cycle-analytics/)
- [Cycle Analytics feature page](https://about.gitlab.com/product/cycle-analytics/)
- [Cycle Analytics feature preview](https://about.gitlab.com/2016/09/16/feature-preview-introducing-cycle-analytics/)
- [Cycle Analytics feature highlight](https://about.gitlab.com/2016/09/21/cycle-analytics-feature-highlight/)
......
......@@ -62,7 +62,7 @@ can lead to confusion during deployments.
> - Introduced in GitLab 10.2 for project-level clusters.
> - Introduced in GitLab 11.6 for group-level clusters.
[Helm](https://docs.helm.sh/) is a package manager for Kubernetes and is
[Helm](https://helm.sh/docs/) is a package manager for Kubernetes and is
required to install all the other applications. It is installed in its
own pod inside the cluster which can run the `helm` CLI in a safe
environment.
......@@ -174,7 +174,7 @@ higher](../permissions.md) access to the associated project or group.
We use a [custom Jupyter
image](https://gitlab.com/gitlab-org/jupyterhub-user-image/blob/master/Dockerfile)
that installs additional useful packages on top of the base Jupyter. You
will also see ready-to-use DevOps Runbooks built with Nurtch's [Rubix library](https://github.com/amit1rrr/rubix).
will also see ready-to-use DevOps Runbooks built with Nurtch's [Rubix library](https://github.com/Nurtch/rubix).
More information on
creating executable runbooks can be found in [our Runbooks
......@@ -221,7 +221,7 @@ You can clone repositories from the files tab in Jupyter:
> - Introduced in GitLab 11.5 for project-level clusters.
> - Introduced in GitLab 12.3 for group- and instance-level clusters.
[Knative](https://cloud.google.com/knative) provides a platform to
[Knative](https://cloud.google.com/knative/) provides a platform to
create, deploy, and manage serverless workloads from a Kubernetes
cluster. It is used in conjunction with, and includes
[Istio](https://istio.io) to provide an external IP address for all
......
......@@ -41,7 +41,7 @@ Host gitlab.com
## GitLab Pages
Below are the settings for [GitLab Pages].
Below are the settings for [GitLab Pages](https://about.gitlab.com/product/pages/).
| Setting | GitLab.com | Default |
| --------------------------- | ---------------- | ------------- |
......@@ -103,13 +103,11 @@ Below are the shared Runners settings.
| Setting | GitLab.com | Default |
| ----------- | ----------------- | ---------- |
| [GitLab Runner] | [Runner versions dashboard][ci_version_dashboard] | - |
| [GitLab Runner] | [Runner versions dashboard](https://dashboards.gitlab.com/d/000000159/ci?from=now-1h&to=now&refresh=5m&orgId=1&panelId=12&fullscreen&theme=light) | - |
| Executor | `docker+machine` | - |
| Default Docker image | `ruby:2.5` | - |
| `privileged` (run [Docker in Docker]) | `true` | `false` |
[ci_version_dashboard]: https://dashboards.gitlab.com/dashboard/db/ci?from=now-1h&to=now&refresh=5m&orgId=1&panelId=12&fullscreen&theme=light
### `config.toml`
The full contents of our `config.toml` are:
......@@ -174,7 +172,7 @@ sentry_dsn = "X"
## Sidekiq
GitLab.com runs [Sidekiq][sidekiq] with arguments `--timeout=4 --concurrency=4`
GitLab.com runs [Sidekiq](https://sidekiq.org) with arguments `--timeout=4 --concurrency=4`
and the following environment variables:
| Setting | GitLab.com | Default |
......@@ -275,7 +273,7 @@ released depending on the type of block, as described below.
If you receive a `403 Forbidden` error for all requests to GitLab.com, please
check for any automated processes that may be triggering a block. For
assistance, contact [GitLab Support](https://support.gitlab.com)
assistance, contact [GitLab Support](https://support.gitlab.com/hc/en-us)
with details, such as the affected IP address.
### HAProxy API throttle
......@@ -390,10 +388,8 @@ High Performance TCP/HTTP Load Balancer:
[runners-post]: https://about.gitlab.com/2016/04/05/shared-runners/ "Shared Runners on GitLab.com"
[GitLab Runner]: https://gitlab.com/gitlab-org/gitlab-runner
[altssh]: https://about.gitlab.com/2016/02/18/gitlab-dot-com-now-supports-an-alternate-git-plus-ssh-port/ "GitLab.com now supports an alternate git+ssh port"
[GitLab Pages]: https://about.gitlab.com/features/pages "GitLab Pages"
[docker in docker]: https://hub.docker.com/_/docker/ "Docker in Docker at DockerHub"
[mailgun]: https://www.mailgun.com/ "Mailgun website"
[sidekiq]: http://sidekiq.org/ "Sidekiq website"
[unicorn-worker-killer]: https://rubygems.org/gems/unicorn-worker-killer "unicorn-worker-killer"
[4010]: https://gitlab.com/gitlab-com/infrastructure/issues/4010 "Find a good value for maximum timeout for Shared Runners"
[4070]: https://gitlab.com/gitlab-com/infrastructure/issues/4070 "Configure per-runner timeout for shared-runners-manager-X on GitLab.com"
......
......@@ -85,7 +85,7 @@ the re-calculation will happen immediately to set a new dynamic date.
## Roadmap in epics
> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/7327) in [GitLab Ultimate](https://about.gitlab.com/pricing) 11.10.
> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/7327) in [GitLab Ultimate](https://about.gitlab.com/pricing/) 11.10.
If your epic contains one or more [child epics](#multi-level-child-epics) which
have a [start or due date](#start-date-and-due-date), then you can see a
......
......@@ -105,13 +105,13 @@ NOTE: **Note:** GitLab is unable to provide support for IdPs that are not listed
| Provider | Documentation |
|----------|---------------|
| ADFS (Active Directory Federation Services) | [Create a Relying Party Trust](https://docs.microsoft.com/en-us/windows-server/identity/ad-fs/operations/create-a-relying-party-trust) |
| Azure | [Configuring single sign-on to applications](https://docs.microsoft.com/en-us/azure/active-directory/active-directory-saas-custom-apps) |
| Azure | [Configuring single sign-on to applications](https://docs.microsoft.com/en-us/azure/active-directory/manage-apps/configure-single-sign-on-non-gallery-applications) |
| Auth0 | [Auth0 as Identity Provider](https://auth0.com/docs/protocols/saml/saml-idp-generic) |
| G Suite | [Set up your own custom SAML application](https://support.google.com/a/answer/6087519?hl=en) |
| JumpCloud | [Single Sign On (SSO) with GitLab](https://support.jumpcloud.com/customer/en/portal/articles/2810701-single-sign-on-sso-with-gitlab) |
| Okta | [Setting up a SAML application in Okta](https://developer.okta.com/standards/SAML/setting_up_a_saml_application_in_okta) |
| Okta | [Setting up a SAML application in Okta](https://developer.okta.com/docs/guides/saml-application-setup/overview/) |
| OneLogin | [Use the OneLogin SAML Test Connector](https://onelogin.service-now.com/support?id=kb_article&sys_id=93f95543db109700d5505eea4b96198f) |
| Ping Identity | [Add and configure a new SAML application](https://docs.pingidentity.com/bundle/p1_enterpriseConfigSsoSaml_cas/page/enableAppWithoutURL.html) |
| Ping Identity | [Add and configure a new SAML application](https://support.pingidentity.com/s/document-item?bundleId=pingone&topicId=xsh1564020480660-1.html) |
## Linking SAML to your existing GitLab.com account
......
......@@ -14,7 +14,7 @@ NOTE: **Note:** We encourage you to view this document as [rendered by GitLab it
GitLab uses "GitLab Flavored Markdown" (GFM). It extends the [CommonMark specification](https://spec.commonmark.org/current/)
(which is based on standard Markdown) in several ways to add additional useful functionality.
It was inspired by [GitHub Flavored Markdown](https://help.github.com/articles/basic-writing-and-formatting-syntax/).
It was inspired by [GitHub Flavored Markdown](https://help.github.com/en/articles/basic-writing-and-formatting-syntax).
You can use GFM in the following areas:
......@@ -352,7 +352,7 @@ However the wrapping tags cannot be mixed:
> If this is not rendered correctly, [view it in GitLab itself](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#math).
It is possible to have math written with LaTeX syntax rendered using [KaTeX](https://github.com/Khan/KaTeX).
It is possible to have math written with LaTeX syntax rendered using [KaTeX](https://github.com/KaTeX/KaTeX).
Math written between dollar signs `$` will be rendered inline with the text. Math written
inside a [code block](#code-spans-and-blocks) with the language declared as `math`, will be rendered
......@@ -379,7 +379,7 @@ a^2+b^2=c^2
_Be advised that KaTeX only supports a [subset](https://katex.org/docs/supported.html) of LaTeX._
NOTE: **Note:** This also works for the asciidoctor `:stem: latexmath`. For details see
the [asciidoctor user manual](http://asciidoctor.org/docs/user-manual/#activating-stem-support).
the [asciidoctor user manual](https://asciidoctor.org/docs/user-manual/#activating-stem-support).
### Special GitLab references
......@@ -641,7 +641,7 @@ Tildes are OK too.
GitLab uses the [Rouge Ruby library](http://rouge.jneen.net/) for more colorful syntax
highlighting in code blocks. For a list of supported languages visit the
[Rouge project wiki](https://github.com/jneen/rouge/wiki/List-of-supported-languages-and-lexers).
[Rouge project wiki](https://github.com/rouge-ruby/rouge/wiki/List-of-supported-languages-and-lexers).
Syntax highlighting is only supported in code blocks, it is not possible to highlight
code when it is inline.
......@@ -922,7 +922,7 @@ Here's a sample audio clip:
You can also use raw HTML in your Markdown, and it'll usually work pretty well.
See the documentation for HTML::Pipeline's [SanitizationFilter](http://www.rubydoc.info/gems/html-pipeline/1.11.0/HTML/Pipeline/SanitizationFilter#WHITELIST-constant)
See the documentation for HTML::Pipeline's [SanitizationFilter](https://www.rubydoc.info/gems/html-pipeline/1.11.0/HTML/Pipeline/SanitizationFilter#WHITELIST-constant)
class for the list of allowed HTML tags and attributes. In addition to the default
`SanitizationFilter` whitelist, GitLab allows `span`, `abbr`, `details` and `summary` elements.
......@@ -1126,8 +1126,8 @@ Using references:
Some text to show that the reference links can follow later.
[arbitrary case-insensitive reference text]: https://www.mozilla.org
[1]: http://slashdot.org
[arbitrary case-insensitive reference text]: https://www.mozilla.org/en-US/
[1]: https://slashdot.org
[link text itself]: https://www.reddit.com
```
......@@ -1149,8 +1149,8 @@ Using references:
Some text to show that the reference links can follow later.
[arbitrary case-insensitive reference text]: https://www.mozilla.org
[1]: http://slashdot.org
[arbitrary case-insensitive reference text]: https://www.mozilla.org/en-US/
[1]: https://slashdot.org
[link text itself]: https://www.reddit.com
NOTE: **Note:** Relative links do not allow the referencing of project files in a wiki
......@@ -1164,7 +1164,7 @@ GFM will autolink almost any URL you put into your text:
```markdown
- https://www.google.com
- https://google.com/
- https://www.google.com
- ftp://ftp.us.debian.org/debian/
- smb://foo/bar/baz
- irc://irc.freenode.net/
......@@ -1172,7 +1172,7 @@ GFM will autolink almost any URL you put into your text:
```
- <https://www.google.com>
- <https://google.com/>
- <https://www.google.com>
- <ftp://ftp.us.debian.org/debian/>
- <smb://foo/bar/baz>
- <irc://irc.freenode.net/>
......
......@@ -24,7 +24,7 @@ For information on eligible approvers for Merge Requests, see
## Principles behind permissions
See our [product handbook on permissions](https://about.gitlab.com/handbook/product#permissions-in-gitlab)
See our [product handbook on permissions](https://about.gitlab.com/handbook/product/#permissions-in-gitlab)
## Instance-wide user permissions
......
......@@ -192,7 +192,7 @@ deployment of the other applications.
Next, if you would like the deployed app to be reachable on the internet, deploy
the Ingress. Note that this will also cause an
[Elastic Load Balancer](https://aws.amazon.com/documentation/elastic-load-balancing/)
[Elastic Load Balancer](https://docs.aws.amazon.com/elasticloadbalancing/)
to be created, which will incur additional AWS costs.
Once installed, you may see a `?` for "Ingress IP Address". This is because the
......
......@@ -112,7 +112,7 @@ There are two options when adding a new cluster to your project:
TIP: **Tip:**
Every new Google Cloud Platform (GCP) account receives [$300 in credit upon sign up](https://console.cloud.google.com/freetrial),
and in partnership with Google, GitLab is able to offer an additional $200 for new GCP accounts to get started with GitLab's
Google Kubernetes Engine Integration. All you have to do is [follow this link](https://goo.gl/AaJzRW) and apply for credit.
Google Kubernetes Engine Integration. All you have to do is [follow this link](https://cloud.google.com/partners/partnercredit/?PCN=a0n60000006Vpz4AAC) and apply for credit.
NOTE: **Note:**
The [Google authentication integration](../../../integration/google.md) must
......@@ -390,8 +390,8 @@ you can either:
When creating a cluster in GitLab, you will be asked if you would like to create either:
- An [Attribute-based access control (ABAC)](https://kubernetes.io/docs/admin/authorization/abac/) cluster.
- A [Role-based access control (RBAC)](https://kubernetes.io/docs/admin/authorization/rbac/) cluster.
- An [Attribute-based access control (ABAC)](https://kubernetes.io/docs/reference/access-authn-authz/abac/) cluster.
- A [Role-based access control (RBAC)](https://kubernetes.io/docs/reference/access-authn-authz/rbac/) cluster.
NOTE: **Note:**
[RBAC](#rbac-cluster-resources) is recommended and the GitLab default.
......
......@@ -50,7 +50,7 @@ To create an executable runbook, you will need:
Nurtch is the company behind the [Rubix library](https://github.com/Nurtch/rubix). Rubix is
an open-source Python library that makes it easy to perform common DevOps tasks inside Jupyter Notebooks.
Tasks such as plotting Cloudwatch metrics and rolling your ECS/Kubernetes app are simplified
down to a couple of lines of code. See the [Nurtch Documentation](http://docs.nurtch.com/en/latest)
down to a couple of lines of code. See the [Nurtch Documentation](http://docs.nurtch.com/en/latest/)
for more information.
## Configure an executable runbook with GitLab
......
......@@ -29,9 +29,9 @@ to the latest release.
Since Deploy Boards are tightly coupled with Kubernetes, there is some required
knowledge. In particular you should be familiar with:
- [Kubernetes pods](https://kubernetes.io/docs/user-guide/pods)
- [Kubernetes pods](https://kubernetes.io/docs/concepts/workloads/pods/pod/)
- [Kubernetes labels](https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/)
- [Kubernetes namespaces](https://kubernetes.io/docs/user-guide/namespaces/)
- [Kubernetes namespaces](https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/)
- [Kubernetes canary deployments](https://kubernetes.io/docs/concepts/cluster-administration/manage-deployment/#canary-deployments)
## Use cases
......
......@@ -50,7 +50,7 @@ users will only see the thread through email.
> **Note:**
Service Desk is enabled on GitLab.com. If you're a
[Silver subscriber](https://about.gitlab.com/gitlab-com/),
[Silver subscriber](https://about.gitlab.com/pricing/#gitlab-com),
you can skip the step 1 below; you only need to enable it per project.
1. [Set up incoming email](../../administration/incoming_email.md#set-it-up) for the GitLab instance. This must
......
......@@ -23,7 +23,7 @@ and go back to **Files**.
## How it works
The File finder feature is powered by the [Fuzzy filter] library.
The File finder feature is powered by the [Fuzzy filter](https://github.com/jeancroy/fuzz-aldrin-plus) library.
It implements a fuzzy search with highlight, and tries to provide intuitive
results by recognizing patterns that people use while searching.
......@@ -38,5 +38,4 @@ Using fuzzy search, we start by typing letters that get us closer to the file.
![Find file button](img/file_finder_find_file.png)
[gh-9889]: https://github.com/gitlabhq/gitlabhq/pull/9889 "File finder pull request"
[fuzzy filter]: https://github.com/jeancroy/fuzzaldrin-plus "fuzzaldrin-plus on GitHub"
[ce]: https://gitlab.com/gitlab-org/gitlab-foss/tree/master "GitLab CE repository"
......@@ -79,7 +79,7 @@ mirror.
To set up a mirror from GitLab to GitHub, you need to follow these steps:
1. Create a [GitHub personal access token](https://help.github.com/articles/creating-a-personal-access-token-for-the-command-line/) with the `public_repo` box checked.
1. Create a [GitHub personal access token](https://help.github.com/en/articles/creating-a-personal-access-token-for-the-command-line) with the `public_repo` box checked.
1. Fill in the **Git repository URL** field using this format: `https://<your_github_username>@github.com/<your_github_group>/<your_github_project>.git`.
1. Fill in **Password** field with your GitHub personal access token.
1. Click the **Mirror repository** button.
......@@ -197,10 +197,10 @@ Assuming you used the former, you now need to verify that the fingerprints are
those you expect. GitLab.com and other code hosting sites publish their
fingerprints in the open for you to check:
- [AWS CodeCommit](http://docs.aws.amazon.com/codecommit/latest/userguide/regions.html#regions-fingerprints)
- [Bitbucket](https://confluence.atlassian.com/bitbucket/use-the-ssh-protocol-with-bitbucket-cloud-221449711.html#UsetheSSHprotocolwithBitbucketCloud-KnownhostorBitbucket%27spublickeyfingerprints)
- [GitHub](https://help.github.com/articles/github-s-ssh-key-fingerprints/)
- [GitLab.com](https://about.gitlab.com/gitlab-com/settings/#ssh-host-keys-fingerprints)
- [AWS CodeCommit](https://docs.aws.amazon.com/codecommit/latest/userguide/regions.html#regions-fingerprints)
- [Bitbucket](https://confluence.atlassian.com/bitbucket/ssh-keys-935365775.html)
- [GitHub](https://help.github.com/en/articles/githubs-ssh-key-fingerprints)
- [GitLab.com](../user/gitlab_com/index.md#ssh-host-keys-fingerprints)
- [Launchpad](https://help.launchpad.net/SSHFingerprints)
- [Savannah](http://savannah.gnu.org/maintenance/SshAccess/)
- [SourceForge](https://sourceforge.net/p/forge/documentation/SSH%20Key%20Fingerprints/)
......@@ -398,7 +398,7 @@ CAUTION: **Warning:**
Bidirectional mirroring should not be used as a permanent configuration. Refer to
[Migrating from Perforce Helix](../user/project/import/perforce.md) for alternative migration approaches.
[Git Fusion](https://www.perforce.com/video-tutorials/git-fusion-overview) provides a Git interface
[Git Fusion](https://www.perforce.com/manuals/git-fusion/#Git-Fusion/section_avy_hyc_gl.html) provides a Git interface
to [Perforce Helix](https://www.perforce.com/products) which can be used by GitLab to bidirectionally
mirror projects with GitLab. This may be useful in some situations when migrating from Perforce Helix
to GitLab where overlapping Perforce Helix workspaces cannot be migrated simultaneously to GitLab.
......@@ -415,7 +415,7 @@ settings are recommended:
- `unknown_git` user will be used as the commit author if the GitLab user does not exist in
Perforce Helix.
Read about [Git Fusion settings on Perforce.com](https://www.perforce.com/perforce/doc.current/manuals/git-fusion/Content/Git-Fusion/section_vss_bdw_w3.html#section_zdp_zz1_3l).
Read about [Git Fusion settings on Perforce.com](https://www.perforce.com/manuals/git-fusion/Content/Git-Fusion/section_vss_bdw_w3.html#section_zdp_zz1_3l).
## Troubleshooting
......@@ -423,4 +423,4 @@ Should an error occur during a push, GitLab will display an "Error" highlight fo
### 13:Received RST_STREAM with error code 2 with GitHub
If you receive an "13:Received RST_STREAM with error code 2" while mirroring to a GitHub repository, your GitHub settings might be set to block pushes that expose your email address used in commits. Either set your email address on GitHub to be public, or disable the [Block command line pushes that expose my email](http://github.com/settings/emails) setting.
If you receive an "13:Received RST_STREAM with error code 2" while mirroring to a GitHub repository, your GitHub settings might be set to block pushes that expose your email address used in commits. Either set your email address on GitHub to be public, or disable the [Block command line pushes that expose my email](https://github.com/settings/emails) setting.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment