To write to the DISPLAY_PHY_CONTROL requires holding the powerwells,
which during early resume we have not yet acquired until later in
intel_display_power_init_hw(). So compute the initial chv_phy_control,
but leave the HW unset until we first acquire the powerwell.

<7> [120.055984] i915 0000:00:02.0: [drm:intel_power_domains_init_hw [i915]] rawclk rate: 200000 kHz
<4> [120.056381] ------------[ cut here ]------------
<4> [120.056621] i915 0000:00:02.0: Unclaimed write to register 0x1e0100
<4> [120.056924] WARNING: CPU: 1 PID: 164 at drivers/gpu/drm/i915/intel_uncore.c:1166 __unclaimed_reg_debug+0x69/0x80 [i915]
<4> [120.056935] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic btusb btrtl btbcm btintel i915 bluetooth coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel snd_intel_dspcfg snd_hda_codec ghash_clmulni_intel snd_hwdep ecdh_generic ecc snd_hda_core r8169 snd_pcm lpc_ich realtek pinctrl_cherryview i2c_designware_pci prime_numbers
<4> [120.057027] CPU: 1 PID: 164 Comm: kworker/u4:3 Tainted: G     U            5.5.0-CI-CI_DRM_7854+ #1
<4> [120.057038] Hardware name:  /NUC5CPYB, BIOS PYBSWCEL.86A.0055.2016.0812.1130 08/12/2016
<4> [120.057058] Workqueue: events_unbound async_run_entry_fn
<4> [120.057275] RIP: 0010:__unclaimed_reg_debug+0x69/0x80 [i915]
<4> [120.057289] Code: 48 8b 78 18 48 8b 5f 50 48 85 db 74 2d e8 1f a0 3f e1 45 89 e8 48 89 e9 48 89 da 48 89 c6 48 c7 c7 00 8c 48 a0 e8 67 82 df e0 <0f> 0b 83 2d ce e2 2b 00 01 5b 5d 41 5c 41 5d c3 48 8b 1f eb ce 66
<4> [120.057301] RSP: 0018:ffffc90000bcfd08 EFLAGS: 00010082
<4> [120.057315] RAX: 0000000000000000 RBX: ffff888079919b60 RCX: 0000000000000003
<4> [120.057326] RDX: 0000000080000003 RSI: 0000000000000000 RDI: 00000000ffffffff
<4> [120.057336] RBP: ffffffffa04c9f4e R08: 0000000000000000 R09: 0000000000000001
<4> [120.057348] R10: 0000000025c3d560 R11: 000000006815f798 R12: 0000000000000000
<4> [120.057359] R13: 00000000001e0100 R14: 0000000000000286 R15: ffffffff8234a76b
<4> [120.057371] FS:  0000000000000000(0000) GS:ffff888074b00000(0000) knlGS:0000000000000000
<4> [120.057382] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [120.057393] CR2: 000055f4197df0d8 CR3: 000000006f326000 CR4: 00000000001006e0
<4> [120.057404] Call Trace:
<4> [120.057635]  fwtable_write32+0x114/0x1d0 [i915]
<4> [120.057892]  intel_power_domains_init_hw+0x4ff/0x650 [i915]
<4> [120.058150]  intel_power_domains_resume+0x3d/0x70 [i915]
<4> [120.058363]  i915_drm_resume_early+0x97/0xd0 [i915]
<4> [120.058575]  ? i915_resume_switcheroo+0x30/0x30 [i915]
<4> [120.058594]  dpm_run_callback+0x64/0x280
<4> [120.058626]  device_resume_early+0xa7/0xe0
<4> [120.058652]  async_resume_early+0x14/0x40

v2: Write our expected value of DISPLAY_PHY_CONTROL during sync_hw, so
that it should always match the driver state after resume.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1089Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203145016.216692-1-chris@chris-wilson.co.uk