Merge tag 'imx-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "i.MX device tree changes for 4.16" from Shawn Guo:

 - A few random updates for vf610-zii board: correct switch EEPROM size,
   enable edma1, correct GPIO expander interrupt, add PHYs for switch2
   device.
 - LS1021A device tree updates: add reboot and QSPI device nodes, label
   USB controllers, specify interrupt-affinity for PMU, fix TMR_FIPER1
   setting, enable esdhc device, add Moxa UC-8410A board support.
 - A bunch of patches from Fabio: fix reg - unit address mismatches,
   remove leading zero in unit address, move regulators out of
   simple-bus, move nodes with no reg property out of bus, remove extra
   clock cell, add missing phy-cells to usb-nop-xceiv, etc.
 - A couple series from Hummingboard developers: re-organise device tree
   files for better handling various board versions, and then add the
   new hummingboard2 board support on top of that.
 - Disable AC'97 input pins pad and add support for powering off for
   imx6qdl-udoo board.
 - Convert from fbdev to drm bindings for imx6sx-sdb and imx6sl-evk
   board.
 - Add device tree for Variscite DART-MX6 SoM and Carrier-board support.
 - Add new board support of TS-4600 and TS-7970 from Technologic
   Systems.
 - A series from Stefan to update imx7-colibri device tree and then add
   new version of Toradex Colibri iMX7D board with eMMC support.
 - Other random updates on various board support.

* tag 'imx-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (126 commits)
  ARM: dts: imx7s: Avoid using label in unit address and reg
  ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv
  ARM: dts: imx6qdl-hummingboard2: Remove leading zero in unit address
  ARM: dts: ls1021a: add support for Moxa UC-8410A open platform
  ARM: dts: imx51-babbage: Fix the 26MHz clock modelling
  ARM: dts: vf610-zii-dev-rev-b: add PHYs for switch2
  ARM: dts: vf610-zii-dev-rev-b: fix interrupt for GPIO expander
  ARM: dts: vf610-zii-dev: enable edma1
  ARM: dts: ls1021a-twr: Remove extra clock cell
  ARM: dts: ls1021a-qds: Remove extra clock cell
  ARM: dts: imx53: add srtc node
  dt-bindings: imx-gpcv2: Fix the unit address
  ARM: imx: dts: Use lower case for bindings notation
  ARM: dts: imx6q-h100: use usdhc2 VSELECT
  ARM: dts: imx6sx: Add support for PCI power domain
  ARM: dts: imx6sx: Fix PCI non-prefetchable memory range
  ARM: dts: imx6qdl-hummingboard2: rename regulators to match schematic
  ARM: dts: imx6qdl-hummingboard2: add v1.5 som with eMMC
  ARM: dts: imx6qdl-hummingboard2: add v1.5 som without eMMC
  ARM: dts: imx6qdl-hummingboard2: add PWM3 support
  ...