From: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>,
      Stuart Hayes <stuart_hayes@dell.com>

- Check drive's write protect bit, try to return appropriate
  errors when attempting to write a write-protected tape.

- Moved "idetape_read_position" call in idetape_chrdev_open
  after the "wait_ready" call.

- Added IDETAPE_MEDIUM_PRESENT flag so driver would know
  not to rewind tape after ejecting it.

- Fixed bug with ide_abort_pipeline (it was deleting stages
  from tape->next_stage to end, instead of from
  new_last_stage->next (tape->next_stage was set to NULL
  by idetape_discard_read_pipeline before calling!).

- Made improvements to idetape_wait_ready.

- Added a few comments here and there.

- Made MTOFFL unlock tape drive door before attempting to eject.

- Added fixes to get Seagate STT3401A Travan working:
  Handle drives that don't support 0-length reads/writes increased timeout
  (retension takes ~10 minutes before irq is returned).
  Fixed request mode page packet command byte 3.

Also remove code depending on NO_LONGER_REQUIRED to match 2.4.x (me).