• Serge Semin's avatar
    i2c: designware: Convert driver to using regmap API · 0daede80
    Serge Semin authored
    Seeing the DW I2C driver is using flags-based accessors with two
    conditional clauses it would be better to replace them with the regmap
    API IO methods and to initialize the regmap object with read/write
    callbacks specific to the controller registers map implementation. This
    will be also handy for the drivers with non-standard registers mapping
    (like an embedded into the Baikal-T1 System Controller DW I2C block, which
    glue-driver is a part of this series).
    
    As before the driver tries to detect the mapping setup at probe stage and
    creates a regmap object accordingly, which will be used by the rest of the
    code to correctly access the controller registers. In two places it was
    appropriate to convert the hand-written read-modify-write and
    read-poll-loop design patterns to the corresponding regmap API
    ready-to-use methods.
    
    Note the regmap IO methods return value is checked only at the probe
    stage. The rest of the code won't do this because basically we have
    MMIO-based regmap so non of the read/write methods can fail (this also
    won't be needed for the Baikal-T1-specific I2C controller).
    Suggested-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
    Signed-off-by: default avatarSerge Semin <Sergey.Semin@baikalelectronics.ru>
    Tested-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
    Acked-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
    Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
    [wsa: fix type of 'rx_valid' and remove outdated kdoc var description]
    Signed-off-by: default avatarWolfram Sang <wsa@kernel.org>
    0daede80
i2c-designware-master.c 20.6 KB