• Nandor Han's avatar
    serial: imx-serial - move DMA buffer configuration to DT · a3015aff
    Nandor Han authored
    The size of the DMA buffer can affect the delta time between data being
    produced and data being consumed. Basically the DMA system will move
    data to tty buffer when a) DMA buffer is full b) serial line is idle.
    The situation is visible when producer generates data continuously and
    there is no possibility for idle line. At this point the DMA buffer is
    directly affecting the delta time.
    
    The patch will add the possibility to configure the DMA buffers in DT,
    which case by case can be configured separately for every driver
    instance. The DT configuration is optional and in case missing the
    driver will use the 4096 buffer with 4 periods (as before), therefore no
    clients are impacted by this change.
    Signed-off-by: default avatarNandor Han <nandor.han@ge.com>
    Signed-off-by: default avatarRomain Perier <romain.perier@collabora.com>
    Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
    a3015aff
fsl-imx-uart.txt 923 Bytes