• Landen Chao's avatar
    net: dsa: mt7530: Add the support of MT7531 switch · c288575f
    Landen Chao authored
    Add new support for MT7531:
    
    MT7531 is the next generation of MT7530. It is also a 7-ports switch with
    5 giga embedded phys, 2 cpu ports, and the same MAC logic of MT7530. Cpu
    port 6 only supports SGMII interface. Cpu port 5 supports either RGMII
    or SGMII in different HW sku, but cannot be muxed to PHY of port 0/4 like
    mt7530. Due to SGMII interface support, pll, and pad setting are different
    from MT7530. This patch adds different initial setting, and SGMII phylink
    handlers of MT7531.
    
    MT7531 SGMII interface can be configured in following mode:
    - 'SGMII AN mode' with in-band negotiation capability
        which is compatible with PHY_INTERFACE_MODE_SGMII.
    - 'SGMII force mode' without in-band negotiation
        which is compatible with 10B/8B encoding of
        PHY_INTERFACE_MODE_1000BASEX with fixed full-duplex and fixed pause.
    - 2.5 times faster clocked 'SGMII force mode' without in-band negotiation
        which is compatible with 10B/8B encoding of
        PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause.
    Signed-off-by: default avatarLanden Chao <landen.chao@mediatek.com>
    Signed-off-by: default avatarSean Wang <sean.wang@mediatek.com>
    Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    c288575f
mt7530.h 22.7 KB